Patches did not update to client Windows 7

Hi
We have 2 domain controllers installed on Windows server 2003 STD. Also Group policy management installed with the these servers. We have installed WSUS server on the another server that installed Windows server 2008 STD. When WSUS server  shows thelist
of updates, I have deployed the updates to the clients(Windows 7 Professional). When I checked the clients, it seems that it could not find the patches update that I have deployed. So, I go back to check GPO that I created to deployed update to clients(Computer
Configuration-->Administrative Templates-->Windows Update). I double click one item to see the detail, I saw it's said that supported on: Windows Server 2003,XP SP1, 2000 SP3. I thought that 's why I could not deploy the update patches to Windows 7.
Then I have installed Group Policy Management on the same server 2008 that I have installed WSUS server. Then I have create new GPO, linked, enforced it. But it's still not work. I cannot deploy the update patches to client. Kindly request any suggestions
for this help to deploy the update.

Hi Lawrence,
The problem is I deployed the update via WSUS 3.0 to install patch on those Windows 7 clients. But it seems that it those clients could get the update from WSUS server. From WSUS server, it saw the clients machine. I checked Group Policy that running on
Windows server 2003 domain controller((Computer Configuration-->Administrative
Templates-->Windows Update). Then I opened one item here. Suppose I open item "Configure Automatic Update". It has the message in the bottom of this message here said that "Supported on: Windows Server 2003, XP SP1, 2000 SP3".
So I was thinking is it possible that the updates could not deploy to those clients because the group policy still running on  Domain Controller Windows server 2003?
When I built the new server that running Windows server 2008 STD and add the component Group Policy Management on that server. It will has the same policy from domain controller Windows server 2003. But when
I looked in the settings in Windows Update. Suppose I opened the item "Configure Automatic Update". It said that "Supported on: At least Windows 2000 Service Pack 3 or Windows XP". Then I not sure is it need to be upgrade Domain Controller
from Windows server 2003 to Windows Server 2008? When I checked the Resultant Set of policy from the client, it get the policy from Group policy domain controller, but I check Group policy on the clients. It didn't shows the policy that I set on the domain
controller. Kindly you advise me how to let the policy deploy to clients running Windows 7.
Thank you very much.

Similar Messages

  • Mobile Sync not update the client or remote store  after first sync

    Subject: OracleLite 9i does not update the client or remote store during synchronization with a Windows CE device
    After the first synchronization, neither the client or remote stores are updated on future synchronization when the publication is created with the fast refresh option. If the publication is created with the complete refresh option, the server will update the client, but the client cannot update the server after the first synchronization. That is once the database (.odb) file is downloaded from the server on the first connect, no updates to either the client, or server are performed for a publication created with the fast refresh option, and only the client store is updated when the publication is created with the complete refresh option. These result are obtained whether I use MSync via Microsoft Active Sync, or I use the Embedded VC++ program I wrote to initiate the synchronization from the Windows CE device.
    I am 99% sure the JAVA code that I am programmatically creating the publications with, and the Embedded VC++ code for initiating the synchronization from the Windows CE device are correct. Both programs adhere exactly to the example code provided either in the documentation, or in the sample code shipped with OracleLite 9i Release 5.0.1. My conclusion is that there is a problem with Oracles replication programs either on the Windows CE, or Server side, or both. This conclusion on my part is strongly supported by the fact that MSync operating with Microsoft Active Sync behaves exactly the same as my code that initiates the replication from the Windows CE device. Also, by looking through the discussion forum, I gather that others are experiencing similar, if not identical, replication problems.
    To support my contention that it is a Oracle problem, I have prepared a simplified version of the Embedded VC++ code to initiate the synchronization for the CE device, and the JAVA code for creating the publication. This code duplicates the problem and is easy to follow. You may download the zip file containing code via the link https://Yggdrasill.cfr.msstate.edu:4443/SyncProblem.htm or the link http://Yggdrasill.cfr.msstate.edu:7778/SyncProblem.htm. This zip contains the Embedded VC++ project files, that will compile and run correctly on a PocketPC with an Arm processor, or the PocketPC x86 emulator when you have the required include files, and libraries in the path. It also includes the JAVA code I used to create the publication. If you extend the VC++ code to run on additional platforms be sure to add the compile flag (directive) /D SQL_NOUNICODEMAP , and the library files olod2040.lib, and ocapi.lib in the library box from Project settings. On my system the paths to the Arm, and x86 libraries are C:\ORALITE501\MOBILE\SDK\WINCE\POCKET_PC\Arm\LIB, and C:\ORALITE501\MOBILE\SDK\WINCE\POCKET_PC\X86EM\LIB, respectively
    I am using a NT 4.0 SP6a server with Database 9i Release 2 Enterprise edition, and OracleLite 9i Mobile Server Release 5.0.1. The Windows CE test device is an iPac running Pocket PC, connected to a system running Windows 2000 Professional SP2, and Microsoft Active Sync 3.1.
    Please review this problem documentation, and tell me what I am doing wrong, or point me to a location where I can get a patch to fix the problem.
    Thanks,     
    Thomas G.Matney
    [email protected]
    (662)325-2791

    Hi,
    I'm also facing a similar problem. I'm using Mobile server as stand alone config with Oracle 8i as server database. After the first download, the data updated at the server is not getting downloaded to client(PDA).
    How did u overcome this problem? Is there any work around?
    I want to do synch using both serial and dial up.
    Thanks in advance,
    Sri

  • Open quantity in Sales Order did not update after cancelling Reserve Invoice

    Client created Credit Memo with reference to Reserve Invoice but this did not update the open quantity in Sales Order. Client is using SAP B1 8.82 PL9. I tested this in SAP 9.0 and still same behavior. Is there a work around other than creating another SO?
    I checked Document Settings and "Reopening Doc by creating credit memo based on Doc" is enabled.
    Thanks in advance.

    Thanks for the reply. How will the client be able to make new reserve invoices from the SO? They are trying to make partial reserve invoices from the sales order. I already suggested to just change the quantity in the reserve invoice before adding. But I have doubt because the SO might close prematurely before they complete the quantity in the SO because open quantity is much less then the quantity in SO.
    SO Quantity: 100
    Open Quantity: 40
    Reserve Invoice 1: 60
    Reserve Invoice 2: 40
    SO closes before they can make Reserve Invoice 2

  • Solaris 10 u8 system did not update daylight savings time

    I am running Solaris 10 u8 x86, and my system did not update for the daylight savings time change on Nov. 1, 2009. I am in the US/Mountain time zone. What should I do?
    Patch 141517-04 is installed, I assume it came with u8.
    Does this have something to with JAVA Time Zone updater? I saw this:
    http://java.sun.com/javase/timezones/tzdata_versions.html
    Shouldn't u8 take care of all this automatically? Do I have to somehow get TZUT 1.3.20? By contacting support? What?
    Any suggestions would be greatly appreciated.

    BTW, I'm running 64-bit Solaris as a VirtualBox (3.0.10) guest VM on a 32-bit WinXP host.

  • Folder Redirection did not update to the new server

    hello  guys, I had migrated quite some time ago to a new server.
    I thought everything works fine, basically the server functionality DNS, Replication and other stuff works fine.
    But I notice that some of the workstation did not actually update its folder redirection to the new server.
    Their desktop and my documents still points to the old server.
    So their offline files, is becoming larger and larger.
    I have some workaround but it's a lot of work. Question is, why those Win 7 workstation folder redirection did not update to the new server.
    What should be the best practice? During the migration process from the old server to the new server, all workstation should be turned on? 
    Or any tools to update  those workstation to the new server without losing their files?
    Basically, just editing the registry to point to the new server will help. But it means losing their current files and whatever old stuff that is on the server will be the one that will be shown on their desktop and documents.
    any inputs is greatly appreciated.
    Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
    IT Stuff Quick Bytes

    Hi biswajeetpattnaik, before migration it was Windows 2003.
    Then I introduce Windows 2008.
    Then I introduce a new Windows 2012.
    Now Windows 2012 is the main DC.
    Actually, everything is under control right now.  As what I said on my first post, I manage to do some work around.
    The only question I have on mind, is how on earth this thing happen.
    I was assuming, that the workstation will be able to point to the new server, without any glitch since everything is working fine.
    And the GPO was applying on the workstation. If I type gpresult /v on the workstation is it being applied. Even if I run GP Modelling it is also shows on the result that the folder redirection is being applied.
    But to my surprise the folder redirection still points to old server, if I have not discovered it then it would be difficult if some files will get lost.
    Thanks for your reply.
    Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
    IT Stuff Quick Bytes

  • Why Apple did not update Macbook pro retina spec for early 2014?

    Why Apple did not update Macbook pro retina spec for early 2014? I really want to buy new macbook pro retina.
    Very disappointing. I cannot wait. I will buy windows laptop because out of patient.

    Does the October 2013 model not meet your needs? What advances would you expect or see in a 2014 model?

  • Excise Invoice (J1IIN) Cancelltion did not update RG23A Part-II

    Hi, Dear's
    I have cancelled Excise Invoice (T.Code J1IIN), system shows reversal accounting entry generated thru J1IH
    BUT did not update RG23A Part-II register
    Thanks
    SR

    Hi,
    1)Have U created Master Data in J1ID,If U are allready Created Master Data pls Check Mtrl Type(It should not Non Cenvatable)
    2)If you are following TAXINN,Then u should maintain Tax code to Company code.
    If u are Using TAXINJ,U should maintain Excise Defaults.
    3)In Excise Group,U should Activate MIGO transactions.
    4)Check ur TAX code,Tax code is Deductable or non dedctable.
    Raghu

  • Excise Invoice Cancellation did not update RG23A Part-II Register ?

    Hi, Dear's
    I have cancelled Excise Invoice (T.Code J1IIN), system shows reversal accounting entry generated thru J1IH
    BUT did not update RG23A Part-II register
    Thanks
    SR

    HI
    As far as i know there is no part 1 or part 2 for RG1 register.
    regards
    Prashanth

  • Can not update iCloud in windows 8.1

    I can not update iCloud in Windows 8.1. Can someone help me with this problem?
    Keep getting an error to contact my vendor. Then it rolls back the update, I have even tried updating through the tools menu in iCloud. and get the same message.

    Turn off Internet Explorer:
    Swipe in from the right edge of the screen, and then tap Search.
    (If you're using a mouse, point to the lower-right corner of the screen, move the mouse pointer up, and then click Search.)
    Enter Windows features in the search box, tap or click Settings, and then tap or click Turn Windows features on or off.
    In the Windows Features dialog box, clear the Internet Explorer 11 check box.
    Reboot the computer and Check for Updates in Windows Updates of the Control Panel
    Go back to the Features dialog box and be sure that Internet Explorer 11 has a check box.
    Now try.
    If all else fails, you will have to Factory Restore the computer.
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • When the 5.0 version came out a notice was sent to my laptop stating it was not compatable with Garman GPS updates at this time. I would like to know if that has been fixed allowing Garman GPS updates now? I did not update to 5.0 for that reason.

    I did not update to 5.0 Firefox because it said it was not compatable with the Garman GPS updates at this time

    I did not update to 5.0 Firefox because it said it was not compatable with the Garman GPS updates at this time

  • ERROR  IN  FILE--XI--RFC SCENARIO.  BAPI  did not UPDATE the DATABASE TABLE

    Hi
    I have created a scenario  FILE -XI- RFC
    File is picked by file adapter  - Its working fine
    I have used BPM
    In RFC side  i used BAPI_INCOMINGINVOICE_CREATE
    Its working fine and return an Invoice Number and Fisical year .
    When i Check this in the R/3 System , in Invoice no Does not Exist .
    Message mapping is ok
    SXMB_MONI all are ok
    Receiver file i got the invoice no and fisical year .
    The Problem is " DATABASE TABLE DID NOT UPDATED "
    So  should i do BAPI_COMMIT seperately ........
    Any solution ................
    VERY VERY URGENT .....
    thanks in advance
    B.Jude

    hi jude,
    Commit Control for Single BAPI Calls
    If you want to use this communication channel to call BAPIs as remote-enabled function modules that change data in the database, set the indicator.
    If executed successfully, the transaction is written to the database by calling the function module BAPI_TRANSACTION_COMMIT explicitly. If an error occurs, the transaction is rolled back by BAPI_TRANSACTION_ROLLBACK.
    The result is determined by the value of the field TYPE in parameter RETURN. If successful, the tables are empty and the values “”, “S”, “I”, and “W” are displayed. All other values are regarded as errors.
    To change this setting, set the indicator BAPI Advanced Mode.
    <b>In the Successful RETURN-TYPE Values table, enter the values that should lead to a successful execution.</b>
    Regards,
    Mandeep Virk

  • PS CC 2014 DNG and RAW 8.5 did not update with the rest of the CC package. I downloaded/installed the DNG/RAW converter but how do you install w/i CC 2014 plugins

    PS CC 2014 DNG and RAW 8.5 did not update with the rest of the CC package. I downloaded/installed the DNG/RAW converter but how do you install w/i CC 2014 plugins

    Thanks John. I have tried solutions 1 to 3 from (-http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.h tml) and they do not work. So I presume that all I can do is to remove all 25 CC applications and start again!
    Incidently, ( http://www.adobe.com/downloads/updates/ ) does not list Adobe Camera Raw 8.4 as an update even though Adobe have announced that it is available (http://blogs.adobe.com/lightroomjournal/2014/04/camera-raw-8-4-and-dng-converter-8-4-now-a vailable.html). The same applies for Adobe Premiere Pro 7.2.2 (http://blogs.adobe.com/premierepro/2014/04/premiere-pro-cc-7-2-2.html). If they are not available this would explain why I cannot download them but I am very suprised that Adobe didn't mention this when I contacted them.
    Anyway thanks again

  • I did not update in time, now I have problems and I cannot seem to update ical.

    I did not update in time, now I have problems and I cannot seem to update ical. Can someone help guide me?

    Apple said to update ical. I guess I waited too long because my calendars and all my events disappeared. I tried syncing with my iPhone and it deleted my calendars off my iPhone. Double clicking on a calendar invite does not work either, it won't open or populate my ical. I requested an update through Mobileme to get ical working again and nothing..... It does not appear to want to update or start working again. Is this an issue with Apple ical in general?

  • Lion install did not update background/screen saver images

    I installed of Lion on my Macbook and it did not update the background/screen saver images with the new ones, anyone know why?

    Check your Macintosh HD/Applications/ folder for a program called "Install OS X Mountain Lion" and then open this to run the installer.

  • I reinstalled iPhoto but events did not update

    I reinstalled iPhoto because I didn't like the photos app. When I did, the events did not update--the last one was April 12. I downloaded my photo stream, thinking that that would get me my most current events, but I just have a mess of photos. How can I get events to recognize everything after April 12?

    Details needed
    1 - what exactly did you do? There is no need to reinstall iPhoto as it is no removed by the OS upgrade - you just launch it form the LaunchPad or the application s folder and use it as before
    2 - what updates did you expect? If you have imported photos into the Photos application then iPhoto knows nothing about them - you have to import them to iPhoto too
    3 - Nothing has changed with PhotoStream what exactly are you seeing?
    LN

Maybe you are looking for