Patches not patching, error occurred "Error is:"

Hello! I am patching a SLES 11 SP2 server with ZCM 11.2.4 with Monthly Update 1 applied. The majority of my patches are applied appropriately, however there are 5 patches that will not apply and I get this unhelpful message in the message log - "An error occurred while executing the program. Error is:" with no error listed after the colon. I have tried clearing the cache on the agent, rebooting, checking and unchecking the "Resolve all RPM dependencies" box, all with no change. For testing purposes, I downloaded the one of the patch RPMs from Novell's web site and was able to to install it without any errors (interestingly enough the ZCM server does not see it as being patched). The patches I am having problems with are as follows...
Novell SUSE 2014:8791 kernel security update for SLE 11 SP2 x86_64
Novell SUSE 2013:8701 libpixman-1-0 security update for SLE 11 SP2 x86_64
Novell SUSE 2013:8681 openssl-certs security update for SLE 11 SP2 x86_64
Novell SUSE 2013:8621 curl security update for SLE 11 SP2 x86_64
Novell SUSE 2013:8656 cifs-mount security update for SLE 11 SP2 x86_64
and attached is a copy of the zmd-messages.log file from the affected client.
Thanks for the help!

ahilton,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

  • When sharing iMovie11 project  with iDVD inmediately message 'the project could not be prepared for publishing because an error occurred (Error in user parameter list).  Finalize issue?

    When sharing my 60 minutes iMovie project with iDVD inmediately message 'The project could not be prepared for publishing because an error  occurred (Error in user parameter list)' appears. Could not find the user parameter list, so I've no more info about this error.
    Option File - Finalize Project gives inmediately the same errormessage.
    Also option Share - Media Browser - Large/Medium/Mobile give the same errormessage.
    Please advise, thank you!

    Additional info: trying to write to internal disk (268 GB Free out of 499 GB)
    Please advise, alko80

  • Error 8062 when I try to copy or move files on my macbook: "This operation could not be completed because an unexpected error occurred (error code -8062)". Can even not install new software now!!

    Since a few days when I try to copy or move files on my macbook, I often get an error message saying "This operation could not be completed because an unexpected error occured (error code -8062)". And then it just quits the copy or move.
    I searched a lot on the internet, but only found solutions for cases you cannot empty the trash due to this issue.
    I tried those solutions for my trash and that helped after some trying.
    However, I still have the problem with copying and moving files.
    I even cannot install new software now, as it has to copy itself to the programs-directory, and gives the same error-message.
    Who can help me??
    Cannot seem to find any info on it on the support-forums or elsewhere.
    My user-account is administrator, I use a 13" Macbook Aluminium (Late 2008). Mac OS X 10.6.8 CPU 2Ghz Intel Core Duo, RAM: 4GB 1067 MHz DDR3.
    Any help would be greatly appreciated...
    Otto

    Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
    - make sure you have at least 10% of your harddisk in free space (I had only 5%).
    - do a PRAM-reset (http://support.apple.com/kb/ht1379)
    - perform a hardware test (http://support.apple.com/kb/HT1509)
    - make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
    - after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
    So far I only cleared up some space on my HD, and already the problem occurs less.
    Still, I will go through the other tips too.
    (will post progress)

  • When trying to empty trash, (securely or not), I get this: The operation can't be completed because an unexpected error occurred (error code -8003).

    When trying to empty trash, (securely or not), I get this: The operation can’t be completed because an unexpected error occurred (error code -8003).  FWIW, there are nearly 3000 items in my Trash - although this does not seem the source of the problem.

    Have you read for possible solutions over in the "More Like This" thread over here?-----------------------> 

  • I have one folder on an XSAN that one machine can not make changes to. Whenever I try to duplicate or copy a file in this folder I get 'The operation can't be completed because an unexpected error occurred (error code -50).'?

    I have one folder on an XSAN that one machine can not make changes to. Whenever I try to duplicate or copy a file in this folder I get 'The operation can’t be completed because an unexpected error occurred (error code -50).'
    The permissions are fine, and I have trashed the finder plist and reset the NVRAM.
    Anyone have a answer?
    Thanks

    Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
    - make sure you have at least 10% of your harddisk in free space (I had only 5%).
    - do a PRAM-reset (http://support.apple.com/kb/ht1379)
    - perform a hardware test (http://support.apple.com/kb/HT1509)
    - make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
    - after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
    So far I only cleared up some space on my HD, and already the problem occurs less.
    Still, I will go through the other tips too.
    (will post progress)

  • I have a pop up window that says "Sorry the operation could not be completed because an unexpected error occured (Error code -61). What does that mean?

    I am using a portable USB storage drive connected to my laptop.  I am trying to delete a file from the USB drive but it is not working. A pop up window appears that says "Sorry the operation could not be completed because an unexpected error occured (Error code -61)". What does that mean and how do I fix it?  Thank you.

    All I can tell you is that is a write permissions error. How is this drive formatted? Check the file's permissions. You can try:
    Open the Terminal application in the Utilities folder. At the prompt enter:
    sudo rm -rf
    Leave a space after "-rf" and drag the file into the Terminal window. Press RETURN. You will be prompted to enter your admin password which will not be echoed.

  • My 15" MacBook Pro (early 2008) will not empty the trash can.The operation can't be completed because an unexpected error occurred (error code -8003).

    My 15" MacBook Pro (early 2008) will not empty the trash can.The operation can’t be completed because an unexpected error occurred (error code -8003).

    Just the Option key. Third from the left on the bottom row.
    If that does not work, try the more elaborate steps described here:
    http://reviews.cnet.com/8301-13727_7-20020873-263.html

  • After many hours of "rendering", the message appears that"--could not be prepared for publishishing because an error occurred error code= -34"  What does this mean?

    After many hous of "rendering"  the message appeared that "--could not be prepared for publishing because an error occurred error code= -34"

    re-post in the iMovie forum where all the people that use that software are.  This is the Lion 10.7 forum.

  • I'm trying to delete files from and external disk and i get this: The operation can't be completed because an unexpected error occurred (error code -1407) can somebody help me? files do not get deleted..and the trash not emptied.. thanks

    I'm trying to delete files from an external disc and it doesn't let me couse this pops up:
    The operation can’t be completed because an unexpected error occurred (error code -1407)
    Please what does it mean? I also have a file in the trash of my mac book named something similar to: a'*.'*.'*'.*.
    and this cannot be deleted either..
    Please let me know what I can do.
    I also have many files in the external disc that I need so I cannot do a format..
    Thank you.
    Best Regards
    Karin

    Have you tried putting the file from your Drobo, onto your computer, then onto to the external hard drive?

  • The operation can't be completed because an unexpected error occurred (error code -50)

    I have a Seagate Central 3tb NAS (latest firmware) attached to my wireless router (Netgear wndr3400v3).  I have a late 2011 macbook pro with Yosemite on it.  When I go through finder to use my NAS I keep getting "The operation can’t be completed because an unexpected error occurred (error code -50)" .  I only get it when I am trying to copy a big folder with other folders and files with in.   I can copy a single file or create folders.  If i try to copy a folder with 100 pics in it then I get the error.  I can create the folder on the NAS and select all 100 files.  When I drag them to the NAS, then they copy with no problems.  Every so often my time machine has an error and says that it has to create a new backup. I read some where to make sure that "put hard disk to sleep when possible" should be selected in the energy saver in preferences.  Still no luck.  A can also drag any file from the NAS back to my laptop or view them from the NAS with no problems.
    Thanks for any help in advance.
    Billy

    Hi there,
    Well I have exactly the same problem! Recently I reset my WD My book White light (2 x 1TB RAID disk), due to the fact that the disk ran full because of TimeMachine.
    I reset the disk, and now I can only write some files to it, but most give this error code.
    I wrote to WD, but they could not give an answer.
    Q: did you update the firmware? Maybe that is causing the problem, in that it is maybe not consistant in the filesystem?

  • I tried to empty the trash, full of back up file from my hard disk and it just says: "The operation can't be completed because an unexpected error occurred (error code -8003)"

    I have an external hard disk of 319.73 GB that I use as back up memory and where I put all the movies and other files that I can't leave on the computer as they occupy too much memory space . One day I was deleting all the previous dated back up to have more space on it , but had to stop the trash for doing it cause it was taking too long and now every time that I try to empty the trash it just says "The operation can’t be completed because an unexpected error occurred (error code -8003)" and even if I press CONTINUE it won't empting it . I'm not really pratical with this things and I tried already to find out the solution here and on Google but apparently nobody ever had a similar error code and I don't know what else to do.
    I've a MacBook Pro with a Mac OS X 10.6.8 Version.
    Thanks again for the help and sorry if I did some english mistakes !
    PEACE & LOVE

    Hey donnie90,
    It seems like this article might be the best for helping you address this issue:
    You can't empty the Trash or move a file to the Trash
    http://support.apple.com/kb/ht1526
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • HT201250 i'm getting message: can't be opened because you don't have permission to see its contents. and he operation can't be completed because an unexpected error occurred (error code -8003).

    I took my computer in to have the Backup restored onto my computer after having a new harddrive put onto my 1year 1/2 old MacBook Pro. When i got it home there was a new User that i had to logout of to getting into my normal user. Don't know why this was, just figured the Mac guys that installed my backup did this for some odd reason. Today i could not open any of my files in the backup on the time machine. All the folder had line going thought them and when i clicked on them I revieved this message: can’t be opened because you don’t have permission to see its contents. After talking with that same mac store. I decided to just delete all the files out of the time machine as it was just put back on my computer and i have everything i need. Hours later when i tried to empty the trash i got this messsage: the operation can’t be completed because an unexpected error occurred (error code -8003).
    Any advise how to fix my problem?
    thanks in advance

    While you see a single trash can, in reality there are trash folders on each mounted volume.  I don't use TM but what you are describing implies that a TM drive is no different with the way trash is treated.  So when the TM is unmounted the trash folder on there is gone and thus the trash looks empty.  Remount the drive, the trash folder on it now causes the trashcan to look like something is in it.
    If TrashIt! could not remove the file, I'm sorry, you will need to use the terminal.  We can do this one step at a time so you only have to copy/paste the lines into terminal (except the first time).  So launch Terminal (in utilities).  You might want to make the window that is shown a bit larger with the grow box since it's pretty small.
    This first line is the only exception to the copy/pasting since you have to enter some information.
    sudo ls -laR /Volumes/your-TM-volume-name/.Trashes
    where your-TM-volume-name is the name of your TM volume.  That's the part you have to fill in since I don't know it.
    When you hit return the sudo in that command will cause a prompt for your admin password.  Enter it and hit return again.  Note the password will not be shown as you type it.  Post the results so I can tell you what to do next.
    Note this ls command is not doing anything but listing the files in the TM's .Trashes folder.  Remember I said each drive has it's own trash folder.  .Trashes is it.

  • External hard drive networked via AirPort Extreme gives "The operation can't be completed because an unexpected error occurred (error code -50)" roughly every two days

    My lab has about 10 Mac computers.  We all access a central hard drive by the way of wifi provided by AirPort.  It's just a regular external hard drive (Seagate Desktop Drive) that I turned into our central storage space by plugging it into AirPort (USB).  It works pretty well.  We seem to be fine with viewing the file directories, opening files, saving, deleting etc., for a day or two.  But then after a day or two, when when trying to modify files or move new files onto the central hard drive, we get the error message: "The operation can’t be completed because an unexpected error occurred (error code -50)"
    Any suggestions as to what may be causing this problem?
    All of the computers are 2011 iMacs & MacPros.  The AirPort is 802.11n WiFi.  The hard drive is a Seagate USB 3.0 Desktop Drive.
    Thank you for your insight/suggestions.

    Thanks for your reply.  I agree about the communication issue. Let me explain my setup and what I am trying to do and perhaps you can answer my questions or make suggestions.
    I have a MAC Mini with a Sony TV for the video monitor.  The  Mac Mini is hard wired to the AE (Airport Extreme).  The AE has a 2 TB HD hooked up to the USB Port.  I have a 17" Mac Book Pro on the WIFI Network.
    I am trying to use the MAc Mini as a "Media Server" of sorts.  Once I get iTunes running the way I plan I am goign to hook up my Apple TV (2nd Generation) to my television downstairs.
    What I am trying to accomplish is have iTunes on all my computers look to the External HD on the AE for the files.  This is why I am having my (-50 errors).
    So far I have noticed that if I go and try to download from iTunes purchased videos that are not ont he computer (to the external HD) it will also occassionaly give me teh -50 error.
    Is there a way to change where the files go when I download them?  Say I want to download videos to the computer but not to the external HD?  However I would want to still be able to move them to the External HD.

  • The disc can't be burned because an unexpected error occurred (error code 0x80020000).

    Hello - I am receiving this error code on all my Apple computers (iMac and MacBook) which have the most current Mac OS X 10.6.7. I'm a photographer and burn CDs frequently and out of the blue began having issues two days ago:
    The disc can’t be burned because an unexpected error occurred (error code 0x80020000).
    What is the remedy? Is it related to a recent update or will there be an update to fix? Since it's not simply one computer, gathering it's not the burn drive but software related...
    FYI - Yes I've tried other brands of disk, etc. however, this is a part of my daily work-flow and have had no issues till a couple days ago.
    Thank you all and any for your time in assisting!!

    Same here. I bought a macbook pro in march. Now I got this error. And I'm from Brazil... Not speak english very well, but tried to explain what happens with my new macbook (that can't burn DVD)...
    Please, could you help me?
    thanks

  • "AN UNEXPECTED ERROR OCCURED (ERROR CODE -600)" HELP...

    I was trying to open a FC EXPRESS HD and this message came up:
    "THE OPERATION COULD NOT BE COMPLETED"
    "An Unexpected Error Occured -ERROR CODE -600-.
    If someone can help me. I'll appreciate.

    It appears that the last time Final Cut Express was used, it didn't completely quit. Open the Activity Monitor in the /Applications/Utilities/ folder to force quit it if it shows up; if it doesn't, save your open documents in other applications and quit the loginwindow process. You may now be asked to log in again or be logged in automatically depending on how the computer is set.
    (24809)

  • Unexpected Error Occurred (error code -600) after Leopard Installation

    Installed Leopard for the second time.
    Everything seems to work fine, but after opening and then closing Mail, I'm unable to open it via the dock. Tried to open by selecting from the applications menu, and get the following message:
    The operation could not be completed.
    An unexpected error occurred (error code -600)
    Same thing with Backup, Parallels too.
    Shutdown behavior is odd. From the apple icon, shutdown doesn't work, everything goes away on the desktop, then the spinning wheel (not beach ball), then nothing. Have to power off to quit, can't be good for the hardware.
    Any suggestions, or am I doomed to a clean install and reinstalling all of my applications? Thankfully I have a drive backed up with SuperDuper with 10.4!
    Thanks for the help.

    OK, I've got ContentBarrier X4 installed and this was the cause of my error codes and it looks like several - if not all of my installation issues with Leopard.
    Apparently, perhaps with Login KeyChain update, it wiped out the ContentBarrier administration name, and on launch, it was likely blocking the applications.
    First, install the Login KeyChain update (see Apple software download page).
    Reinstalled ContentBarrierX4 http://www.intego.com/services/updates.asp (make sure to select ContentBarrierX4).
    Open ContentBarrierX4 - you'll have to sign in as the administer. You may have to go into Preferences > Accounts > to make sure that you've got admin rights.
    Once you logged in, exit, then reboot.
    For the first time since installing Leopard, I can shutdown without a hard power off.
    Salvation...

Maybe you are looking for