Patchin portal cluster problem

I am trying to run, Portal patch 13 on a WAS cluster.
t
The problem I am getting is that the patch installation asks for a "username and password" for administrator
When I enter the details I get an error.
My question is that if it is in safe modde, how is the install checking these details. I cannot log into the visual admin when the cluster is in safe mode.
Anybode else have this problem.
Thanks

I think I just figured out how to use the sage mode. It basically just limits the cluster to 1 server and 1 dispatcher. Youre right, the same result can be achieved with the config tool
Thanks

Similar Messages

Ironport c160 cluster problems

Hi!
I have two Ironport C160 in cluster mode, tonight one of them has stopped working, and I can not access this on, but it responds to ping.
In the system log I found only the following line:
Mon Mar 12 15:30:39 2012 Warning: Error connecting to cluster machine xxxxx (Serial#: xxxxxx-xxxxxx) at IP xx.xxx.xxx.x - Operation timed out - Timeout connecting to remotehost cluster
Mon Mar 12 15:31:09 2012 Info: Attempting to connect via IPxxxxx toxxxxxxxx port 22 (Explicitly configured)
My version is:6.5.3-007
What I can log to find the cause of the problem?
How I can find out what the problem?
How can you solve?
Thank you very much

Well, "queuereset" is not a valid command, what you mean is "resetqueue", which I would strongly not recomment to use without having a very good reason.Because this command removes all messages from the workqueue, delivery queues, and quarantines. There are usually less destructive ways to fix a cluster problem.
BTW, version 5.5 has long been gone, so we won't need to reference any bugs from there any more.
Regards,
Andreas

Any info on using Veritas for offline Portal Cluster backup

Anyone have detailed info on how to correctly use VERITAS to backup a PORTAL CLUSTER with ORACLE FAILSAFE on WIN32?
Oh.. well.. INcorrectly ways will suffice as well.

Jerry,
I have had some exposure to Sun Fire servers running Oracle. The disk was made highly available using the Veritas database cluster software. Both servers share the database files stored on a storage array network. Also Volume Replicator is available via Veritas/Symantec.
You can check the other compatible HA software on;
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d70a790-0201-0010-97a0-fdcb2ab0108e
Replication Whitepaper Tool on Symantec (needs registration)
http://www.veritas.com/Vrt/offer?_requestid=17351&a_id=9089&
Regards,
James

SPF is not supported SCVMM cluster problems, when repairing ?

SPF is not supported SCVMM cluster problems, when repairing ?

See:
*http://forums.sdn.sap.com/thread.jspa?threadID=2056183&tstart=45#10718101

How can we verify if all instances in the Portal Cluster are available ?

We have to write manual scripts to check if all instances in Portal Cluster environment are available and take some proactive steps.
Can somebody suggest me the best way to do it ?

There are Monitoring Products to do that so why do you want to write something yourself.
Some of the products I can think of are:
1) SAP Solution Manager Diagnostics - It comes with a tool for monitoring called Wily Introscope which I guess has this capability
2)Other one is BMC Software - Check out at
http://www.bmc.com/products/proddocview/0,2832,19052_19429_20213327_9841,00.html
If you still want to do it manually then you will have to monitor the server processes through some script to monitor.
Regards,
Piyush
ps: Please mark useful answers.

Oracle9iAS Portal Installation problem on Windows 2000

I'm trying to install distributed oracle AS environment.
There are two servers(A, B) with Windows2000+SP2
and one of them, Server A, has domain controller in it.
Server B is a member of that domain.
In server A,
I installed Oracle9i and Oracle9iAS infrastructure.
Everything looks fine when I checked with EnterpriseManager website.
These are the components I can see...
BC4J, ClickStream Collector, HTTP Server Internet Directory, OC4J_DAS, OC4J_Demos, OC4J_Home, Single Sign-On:orasso:7777
All the components are running except ClickStream Collector.
In server B, as a middle-tier,
I installed Oracle9iAS Portal/Wireless.
Everything goes fine except Wireless Configuration at the end of the Installation Process.
Ignoring Wireless error, I connected to EnterpriseManager website in Server A.
I can see the <9iAS Portal/Wireless> instance registered that I just installed in Server B.
Click into the <9iAS Portal/Wireless> Application Server, it seems OK except Wireless.
But, when I opened <oracle_home>/assistants/opca/install.log in Server B,
I could find some ERRORS while <configuring portal as a Partner Application for SSO Server>.
INSTALL_ACTION:createPartnerApplicationConfig()
INSTALL_ACTION:assocPortalToExistingSSO()
It was sql*plus ERROR, and it says...
SQL>ERROR:
ORA-01017: invalid username/password: login denied
Because of this error, I think, Portal DAD creation has failed.
Could somebody can help me with this problem?

Hi,
The problem of installing Oracle Product on P4 computers comes from the symcjit.dll (Java Jusit in time compiler) which doesn't recognize the P4.
I installed Oracle products on my P4 just by copying the CD's on a harddisk and manually replacing the dll (which is Version 3...) by a one I found to be Version 4.0.0.7.
It is maybe not the best solution as it can result some instability (I don't know yet) but at least I didn't bought a brand new computer for nothing.
The question is to know when Oracle will deliver some patches to allow a normal installation on P4s.
Let me know if you want me to send you the dll.
Regards,
Jacques.

Portal Installation Problem on Sun Solaris

Hi,
I'm trying to Install portal (Oracle 9i AS ) on Sun Solaris 2.8 (64 bit). I have followed all the steps and installer show successfull installation. But when I'm trying to check the installation thru web browser, I'm not getting anything. It is not able to load portal. Please let me know do I need to start any listener or anything else.
What else should I do to check the mistakes because I have installed it twise but no luck.
Thanks.
Sandeep

I am having the same problem installing on Windows 2000. I looked at the services that were installed and two of the ones that were marked as Automatic did not start when I rebooted. They are:
OracleiSuitesHTTPServer
OracleOraHome81TNSListener
I also tried to start the HTTP server from the command line but got the following error:
D:\Oracle\iSuites\Apache\Apache>apache
Syntax error on line 14 of D:\Oracle\iSuites\Apache\Apache\conf\mod__ose.conf:
AuroraService - directive already in effect for this Server
If anyone has a solution please let me know. I had a hard enough time trying to get through the installation at all.
Thanks,
-Stephanie
null

Leopard - QMaster and Virtual Cluster problem

Hi guys,
Up until yesterday I had my MacPro Octo running under 10.4 where I did succesfully set up a Virtual Cluster using 4 instances for Compressor. It worked as a charm and my MacPro was doing it's job perfectly.
Today, I made a bootable backup of my 10.4 install and installed 10.5 using the erase and install options ( clean install ). I installed all my software again and tryed setting up my Virtual Cluster again, using the same settings I had under 10.4. Sadly I can't seem to get it working.
In the QMaster Preferences pane, I have the QuickCluster with Services option checked. For the compressor entry in the Services I have the Share Option checked and used 4 isntances for the selected service. The Quickcluster received a descent name and the option to include unmanaged services from other computers is checked.
I have the default options set in the Advanced tab, ( nothing checked except log service activity to log file and Show QMaster service status in the Menu Bar). I then started the Cluster using the Start Sharing button.
Now I open u Compressor and add a file to process ( QT encode to iPod ), but when I hit the Submit button, my Virtual Cluster doesn't show up in the Cluster Dropdown. If I now leave the Compressor GUI open for 5 minutes, it will eventually show up in the list, and I can pick it. Sadly, picking it from the list at this point and hitting the Submit button makes Compressor Hang.
I checked my logs, but the only thing concerning Compressor I could find is this :
4/12/07 20:12:35 Compressor[242] Could not find image named 'MPEG1-Output'.
4/12/07 20:12:35 Compressor[242] Could not find image named 'MPEG1-Output'.
4/12/07 20:12:35 Compressor[242] Could not find image named 'MPEG1-Output'.
4/12/07 20:12:41 Batch Monitor[190] * CDOClient::connect2: CException [NSException raised by 'NSPortTimeoutException', reason = '[NSPortCoder sendBeforeTime:sendReplyPort:] timed out (218488391.647220 218488361.647369) 1'], server [tcp://10.0.1.199:49167]
4/12/07 20:12:41 Batch Monitor[190] exception caught in -[ClusterStatus getNewStatusFromController:withOptions:withQueryList:]: NSException raised by 'NSPortTimeoutException', reason = '[NSPortCoder sendBeforeTime:sendReplyPort:] timed out (218488391.647220 218488361.647369) 1'
4/12/07 20:17:55 Batch Monitor[190] * CDOClient::connect2: CException [NSException raised by 'NSPortTimeoutException', reason = '[NSPortCoder sendBeforeTime:sendReplyPort:] timed out (218488705.075513 218488675.075652) 1'], server [tcp://10.0.1.199:49167]
I tried Stopping and then Restart Sharing and I noticed the follwoing entries in my log :
4/12/07 20:23:26 compressord[210] can't refresh cache from file "/Library/Application Support/Apple Qmaster/qmasterservices.plist"
4/12/07 20:23:26 compressord[211] can't refresh cache from file "/Library/Application Support/Apple Qmaster/qmasterservices.plist"
4/12/07 20:23:26 compressord[213] can't refresh cache from file "/Library/Application Support/Apple Qmaster/qmasterservices.plist"
4/12/07 20:23:26 qmasterca[269] can't refresh cache from file "/Library/Application Support/Apple Qmaster/qmasterservices.plist"
4/12/07 20:23:26 qmasterqd[199] can't refresh cache from file "/Library/Application Support/Apple Qmaster/qmasterservices.plist"
4/12/07 20:23:27 QmasterStatusMenu[178] * CDOClient::connect2: CException [NSException raised by 'NSPortTimeoutException', reason = '[NSPortCoder sendBeforeTime:sendReplyPort:] timed out (218489009.603992 218489007.604126) 1'], server [tcp://10.0.1.199:49407]
4/12/07 20:23:27 Batch Monitor[190] * CDOClient::connect2: CException [NSException raised by 'NSPortTimeoutException', reason = '[NSPortCoder sendBeforeTime:sendReplyPort:] timed out (218489037.738080 218489007.738169) 1'], server [tcp://10.0.1.199:49407]
4/12/07 20:23:27 Batch Monitor[190] exception caught in -[ClusterStatus getNewStatusFromController:withOptions:withQueryList:]: NSException raised by 'NSPortTimeoutException', reason = '[NSPortCoder sendBeforeTime:sendReplyPort:] timed out (218489037.738080 218489007.738169) 1'
Batch Monitor immediately detects the cluster being active again, but Compressor doesnt, leaving me only This Computer available in the Cluster drop down when submitting a batch.
In my Activity Monitor, I notice that CompressorTranscoder is not responing ( the 4 CompressorTranscoderX processes are fine ) and the ContentAgent proces isn't responding neither.
Does anyone have any clue on what I could check next or how I could fix my problems ?
Thanks a lot in advance,
Stefaan

Bah, this is crazy, today it doesn't work anymore. Yesterday my cluster was showing up in the Dropdown window, and I could submit a batch to it, and it got processed over my virtual cluster.
Today, after finishing the second part of my movie, I tried it again. I didn't change anything to my settings, my machine hasn't even rebooted (just recovered from sleep mode) and my cluster isn't showing up at all anymore. Even the Qmaster menu doesn't show it
Guess, I'll have to wait out until it appears again, or try a few things out

BW portal theme problem

Hi all
We just implemented BW portal that works fine except when you try to save theme. In that case server holt's for the while and java stack losses connection ABAP stack.
Error I get after the while is
Dispatcher running but no server connected!
Enyone with similar problem?
Patrick
Message was edited by:
Patrick Rezek

Maybe your proxy is misconfigured that it blocks some parts. Check it within a HTTP trace. This should provide an answer.
Cheers,
Anja

WebLogic 8.1 Portal Admin problem !

Hello,
I use the web-based portal admin to create a portal with some deployed portlets.
My problem is that the URL is very long (http://localhost/portal/appmanager/dse/desktop1?...) and can I create a portal with the URL like (http://localhost/dse/desktop1?....)
Eric

Address 7001 does't seem to be good idea for debuging, it is weblogic default address.
try 3999.
"Arsel" <[email protected]> wrote:
>
Hi There,
I started weblogic server 8.1 with the follwing option -Xdebug -Xnoagent
-Djava.compiler=NONE
-Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=7001
Weblogic started successfully but when I tried to attached the java process
from
my IDE I got the error 'Target server failed to handshake' and in the
weblogic
console I got the following error.
<22-Aug-2003 10:09:52 o'clock AM EDT> <Error> <HTTP> <BEA-101083> <Connection
failure.
java.io.IOException: A complete message could not be read on socket:
'weblogic.servlet.internal.MuxableSocketHTTP@1871db
1 - idle timeout: '60000' ms, socket timeout: '5000' ms', in the configured
timeout
period of '60' secs
at weblogic.socket.SocketMuxer$TimeoutTrigger.trigger(SocketMuxer.java:734)
at weblogic.time.common.internal.ScheduledTrigger.run(ScheduledTrigger.java:243)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:97)
at weblogic.time.common.internal.ScheduledTrigger.executeLocally(ScheduledTrigger.java:229)
at weblogic.time.common.internal.ScheduledTrigger.execute(ScheduledTrigger.java:223)
at weblogic.time.server.ScheduledTrigger.execute(ScheduledTrigger.java:49)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:178)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:151)
Does weblogic 8.1 support JPDA? Any suggesstion is higly appreciated.
Thanks.
Arsel

Search Portal Roles problem

Hi,
I have a problem enabling the portal roles search. I have followed this guide:
http://help.sap.com/saphelp_nw04/helpdata/en/b2/d59a4271c80a31e10000000a1550b0/frameset.htm
The problem is that when i enable the portalRolesSearch in the index managemant service search does not work at all. I get the following error when trying to search:
Error during search occurred - com.sapportals.wcm.WcmException
Does anyone know what the problem might be?
Regards Thomas

Hello!
We get the same error. We are on Ep 6 SPS 15. Did you get any other information on this issue or have you opened an OSS call yet?
Regards, Christian

August Patch Cluster Problems

Has anyone had the following issue after installing the latest Patch Cluster?
After a reboot I get
couldn't set locale correctly
To correct this I have to edit /etc/default/init
and remove
LC_COLLATE=en_GB.ISO8859-1
LC_CTYPE=en_GB.ISO8859-1
LC_MESSAGES=C
LC_MONETARY=en_GB.ISO8859-1
LC_NUMERIC=en_GB.ISO8859-1
LC_TIME=en_GB.ISO8859-1
If I then create a flash archive and use this flash archive the jumpstart process then puts the locale info back and the problem appears again.
It's not critical as I don't need to be on the latest Patch Cluster but would wondered if I'm the only one having issues?

If you open the directory in CDE's file manager, right click on the zipped file and select unzip. The cluster will be unzipped to a directory structure called x86_recommended or something of the sort. Change to that directory to run the patch cluster install script. The patch script is looking for that directory structure.
Lee

Customization of Portal Logon problem

Hi
I am Trying to change the Logon Screen for my Portal but cannot find the file specified by SAP . . .
<J2EE_Engine_Instance>\j2ee\cluster\server<X>\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd
I get to WEB-INF and there is no deployment folder?
is this a rights issue?
any help appreciated
tom

Thomas,
You can download same PAR file as:
Logon to portal as admiistrator:
Navigate to System Admiistration --> Support --> Portal Runtime --> Browse Deployment --> portalapps --> com.sap.portal.runtime.logon
download the file.
Thanks,
Yogesh

WebDynpro ABAP and Portal Navigation problem

Hi all,
I've a problem with triggering Portal navigation from a custom WD4A application.
The request is to have an "Exit" button implemented and if pressed, the portal goes back to the top page:
--> Search
   --> Kind of Search
      --> WD4A -> Exit goes back to "Search"
I've tried using absolute_navigation/relative_navigation methods from interface if_wd_portal_integration, but they do not work at all.
It seems that the portal totally doesn't care about the request and remains still.
Methods are called passing the PCD of the "Search" page (i've tried even with the ROLES).
Anyone has an idea?
By the way, I was thinking about raising some kind of "standard" event like "navigate" or something...I don't know if it's applicable.
Thanks in advance,
R.

Hi,
If you are navigating from one WD Application to another you can either use URL or Object Based Navigation.
In URL Method you can call the target application from the source application.
You can create the method in the Window of WD Component.
You also need to create exit plug (outbound) with parameter url (type string) and specify the plug type as Suspend.
Trigger this method as desired by you in your application.
CALL METHOD cl_wd_utilities=>construct_wd_url
    EXPORTING
      application_name = 'TARGET_APPLICAITON_NAME'
    IMPORTING
      out_absolute_url = lv_url.
CONCATENATE lv_url '?sap-client=' sy-mandt '&sap-language=' sy-langu '
INTO        lv_url.
wd_this->fire_exit_plg(
    url = lv_url                              " string
Thanks
Vishal

NVGRE Gateway Cluster Problem

Hello
We have following setup:
Management Hyper-V hosts running WAP, SPF and SCVMM 2012 R2 components
Gateway Hyper-V host: single node gateway hyper-v host, configured as a single node cluster to be able to join extra hardware in the future
this Hyper-V host runs 2 Windows Server Gateway VMs,configured as a failover cluster.
The following script is used to deploy these windows server gateway VMs as a high available NVGRE gateway service:
http://www.hyper-v.nu/archives/mscholman/2015/01/hyper-v-nvgre-gateway-toolkit/
two tenant Hyper-V hosts running VMs which are using network virtualization
The setup is completed successfully and when creating a tenant in WAP and creating VM network for this tenant using NAT, the VMs of this tenant are accessible and can access Internet using the HA Gateway cluster.
The Gateway Hyper-V host and NVGRE Gateway VMs are running in a DMZ zone, in a DMZ Active Directory Domain.
Management and Tenant Hyper-V hosts, incl all Management VMs, are running in a dedicated internal Active Directory domain.
Problems start when we failover the Windows Server Gateway service to the other VM node of the NVGRE Gateway cluster. We see in the lookup records on the Gateway Hyper-V host that the MAC address of the gateway record for tenants is updated with the new
MAC address of the VM node running the gateway service.
But in SCVMM, apparently, this record is not updated. The tenant hosts still use the old MAC address of the other Gateway VM node.
When looking in the SCVMM database, we can also see that in the VMNetworkGateway table that the record representing the gateway of the tenant, still points to the MAC address of the PA network adapter of the other node of the NVGRE Gateway cluster, not to the
new node on which the gateway service is running after initiating a failover.
On the tenant hyper-v hosts, the lookup record for the gateway also points to the old node as well.
When manually changing the record in the VMNetworkGateway table to the new MAC address, and refreshing the tenant hosts in SCVMM, all starts working again and the tenant VMs can access the gateway again.
Anybody else facing this issue? Or is running a NVGRE Gateway cluster on a single Hyper-V node not supported?
To be complete, the deployed VMs running the gateway service are not configured as HA VMs.
Regards
Stijn

If i understand your post correctly you have a single Hyper-V Host running 2 GW VM's. I think the problem is that when you deploy a HA VM Gateway Cluster it wants to create a Cluster Resource (PA IP Address) on the Hyper-V host as well. So when you run 2
hyper-v hosts and 2 gw vm's and you move the active role to another host it will move the Provider Address to the other Hyper-V host as well. I believe this is by design. You should ask yourself also the question why running 2 vm's in a cluster on the same
node ;-)
I would recommend to use 2 node Hyper-V Host Cluster (This is needed for the HA PA Address, And not necessary for your GW VM's )
Then run the deployment toolkit again. Now when that's done again, take a close look on how the Active node on the Hyper-V host has the corresponding PA assiogned on that Hyper-V host. Then do a failover, refresh the cluster manager and take notice
of the PA address that has moved along to the other Hyper-V host that is the active one. It is diffuclt to explain, in a couple of sentences but i hope you have the opportunity to build the 2nd Hyper-V host aswell and create a cluste.
Side note: if you want to keep the excising VM Gateway cluster. remove all gateways from VM Networks and remove the Gateway service from VMM. Then provision the second Hyper-V Host, Configure Cluster, Live migrate 1 GW VM node to it. Reconfigure
Shared VHDX for quorum and csv and then add back the network service again. Don't try to leave it as a network service in VMM and move the VM to another node. It will not work when failover.
Best regards, Mark Scholman. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Patchin portal cluster problem

Similar Messages

Maybe you are looking for