Patching before AWM 10.2.0.3.0. ????

Hi.
Do I need to patch database, which is now 10.2.0.2.0 to use AWM 10.2.0.3.0?
Because, I download new AWM 10.2.0.3.0. and when I try to connect to user for which I created analytic workspace with AWM previous versionn i receive an error:
awm.exe entry point not found
java.sql.SQLException: C:\oracle\OraHome_1\bin\ocijdbc10.dll: The specified procedure could not be found
at oracle.olap.awm.connection.ConnectionManager.connect(ConnectionManager.java:116)
at oracle.olap.awm.connection.ConnectionDialogActionThread.doAction(ConnectionDialogActionThread.java:73)
at oracle.olap.awm.ui.dialog.ThreadedDialogActionThread.run(ThreadedDialogActionThread.java:49)
I start AWM from folder D:\AWM_DOWNLOAD\Analytic Workspace Manager\bin
Does any know this?
Thanks.
Message was edited by:
deep222

Deal All,
I am using Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production With the Partitioning, OLAP and Data Mining options along with analytic worsk space manager version. 10.2.0.3.0A.
My problem is when i try to create the worskspace i am getting the following error;
1. oracle.AWXML.AWException: An Error occurred creating analytic workspace GLOBAL
2.at oracle.olap.awm.dataobject.dialog.PropertyViewer.doCreateAction(PropertyViewer.java:495)
3.at oracle.olap.awm.dataobject.dialog.CreateDialogHostActionThread.doAction(CreateDialogHostActionThread.java:55)
at oracle.olap.awm.ui.dialog.ThreadedDialogActionThread.run(ThreadedDialogActionThread.java:49)
and i was not able to proceed further. I request any one from this forum to extend help.
Regards
Vinod Hariharan
Re

Similar Messages

Apply main patch before prerequisite patches

Hi,
I have a main patch and 7 prerequisite patches
accidently i applied main patch before prerequisite patches on Devlopement server.
after i applied one by one 3 patches , they applied successfully but after that other patches are unable to applied .
Please help me.
appriciate your Reply.

In addition to the complete error message and the list of patches you have to provide, please post the details of the application release, database version and OS.
If the main patch was applied successfully then you applied all pre-req. then you do not have to reapply the main patch again.
Thanks,
Hussein

Patch for AWM 11.1.0.7

Hi Gurus,
I have installed Oracle Database 11.1.0.7 on linux 64 bit box (server) and Oracle Client 11.1.0.7 on 32-bit windows for AWM. What patch should i apply for OLAP since AWM is breaking on making even few simpler changes ??
Thanks in Advance.

Hi there,
All of the information you need is here:- http://www.oracle.com/technology/products/bi/olap/collateral/olap_certification.html
I would recommend installing the OLAP 'C' patch (no. 8908784) for the database, and also you should download a standalone AWM 11.1.0.7B to replace the version you installed with the Oracle Client.
Of course, it would be even better if you could work with the 11.2 version of the database and AWM which has been out for a few months now
Thanks,
Stuart Bunby
OLAP Blog: http://oracleOLAP.blogspot.com
OLAP Wiki: http://wiki.oracle.com/page/Oracle+OLAP+Option
OLAP on OTN: http://www.oracle.com/technology/products/bi/olap/index.html
DW on OTN : http://www.oracle.com/technology/products/bi/db/11g/index.html

An alert message observered while appling latest patch MLR 10

Hi Gurus,
While applying latest patch MLR10 we observed an alert message as below
"Creating log file "C:\oracle\midtier\.patch_storage\8404955\Apply_8404955_05-21-
2009_15-44-27.log"
Conflicting patches: 8204237,
Patch(es) 8204237, conflict with the patch currently being installed (8404955).
If you continue, patch(es) 8204237, will be rolled back and the
new patch (8404955) will be installed.
Note: If the patch currently being installed (8404955) is rolled back,
it is recommended that the fixes being rolled back here (8204237, ) are reinstal
led.
If a merge of the new patch (8404955) and the conflicting patch(es)
8204237, is required, contact Oracle Support Services and request
a Merged patch.
Do you want to STOP?
Please respond Y|N
Should we rollback the previous patch before applying MLR10 ? or can i continue with patch application ?
Thanks in advance,
Regards,
Cema

Please continue the MLR10 patch installation, this message would appear for the all patch installation (of course, patch number would be different though).

How to install a patch from local JAR file...

Newbie question -
I'm getting an error when deploying an MDB on WL 10.0 - someone else had also come across that same error and he sent me a patch (CR326377_10GA.jar) that should fix it.
How do I install that patch on my local WinXP installation of WL - do I just add an entry to the CLASSPATH of the startweblogic.bat file? I'm a little concenred about the order of JARs there... is there a better way?!
I tried looking up this patch using the Smart Update utility - but I could not find it there - how do I do it manually?
thanks,
james
Edited by jdepaul at 03/20/2008 4:13 PM

I believe you can contact support and get a patch id and passcode for this
patch and then install using smart update.
StartWeblogic.cmd will also look for a weblogic_patch.jar in the patch
directory. I.e. something like
d:\BEA10\patch_wls100\profiles\default\sys_manifest_classpath\weblogic_patch.jar
Cut/paste the directory from the output of startweblogic.cmd and then create
the directory and copy the patch to the right filename.
Or you can put the patch before any other jars in the classpath.
Peter
<James DePaul> wrote in message news:[email protected]..
Newbie question -
I'm getting an error when deploying an MDB on WL 10.0 - someone else had
also come across that same error and he sent me a patch (CR326377_10GA.jar)
that should fix it.
How do I install that patch on my local WinXP installation of WL - do I just
add an entry to the CLASSPATH of the startweblogic.bat file? I'm a little
concenred about the order of JARs there... is there a better way?!
I tried looking up this patch using the Smart Update utility - but I could
not find it there - how do I do it manually?
thanks,
james
Edited by jdepaul at 03/20/2008 4:13 PM

Call of duty 1.5 patch on intel working for anyone?

If anyone has seen my past posts you would know i have been having some problems with my 24" intel iMac and call f duty and call of duty United Offensive. Well to save you all the past posts..i have finally gotten the disks installed on my computer and running. the problem is if i try to install the 1.5 patch for COD. the installation doesn't happen. it stops installing at the start and looks like it will continue but never does. I called Aspyr and they said that the patch is not intel compatible and that it won't install. bummer. however they also told me that COD in general would not run on an intel or with my graphics card and it runs 100% better than COD 2 does....which runs like atari. has anyone installed the 1.5 patch successfully? if so how? thanks

ok guys...here is the NEW news. you may like this but lets not get our hopes up. don't bother trying to install the patch from your friends computer,i have talked to aspyr a few times over the phone about this the past couple of days and they said it can only be updated from the installer. no other way. I tried doing that too with no success. but i will now copy the email that i sent them and their responses. tell me how i did:)
*First email to them:*
+i have been having problems installing COD and UO on my 24" intel mac. If you check past tickets you can see what i mean. I finally got both CD's to install. the first CD installed without a problem the second CD i had to transfer the files by hand and not use the installer. now the next problem is the patch...or patches...(not sure if they made one patch to replace the two patches? but seeing as I have tried to install the patch before and it wont install i was wondering if there was a way i could install file by file instead of using the installer. could i get it done this way...if so where can i get the files or how can i extract them on my computer, thanks+
*their reply:*
+Thank you for choosing Call of Duty Deluxe for the Mac. Unfortunately, there is no way to install the patches besides running the installer.+
+What happens when you try to use the installer for the United Offensive patch?+
+Sorry we could not resolve this issue.+
+Have a great day.+
+-Aspyr Tech Support+
*My Reply to them:*
+when i try to install the installer it doesn't get past the first+
+second of installation. it just stays in the one spot forever and+
+never moves.+
+do i have to install 2 patches or is the one i have that says it is a+
+combined patch for cod and cod:uo enough?+
*their reply:*
+Ideally, you would need Call of Duty: Version 1.5 patch as well as the Call of Duty: United Offensive: Version 1.5.1 patch.+
+The issue you are having is related to the fact that these patch installers are old and do not run properly on Intel Macs. The first Call of Duty games are not Universal Applications and run under Rosetta emulation when using an Intel Processor. The patches also react adversely when trying to operate in the Intel processor environment.+
+Since this patch issue is also occurring with some games that are actually supported for play on Intel Macs we are trying to isolate and fix the problem for these patch installers first. Unfortunately, since Call of Duty and United offensive are not supported on Intel Macs, I cannot guaranty that we will rebuild these patch installers for this title.+
+The best way to keep informed about patch updates is to sign up for our newsletter here:+
+http://www.aspyr.com/news/newsletter_signup+
+Sorry I couldn't help you more.+
+Thanks for your patience.+
+Have a nice day.+
*Me again:*
+thanks for the info, i guess i waill just play under 1.4.... but honestly as a+
+customer that plays mac games and just bought an intel mac, you should seriously+
+try to fix that 1.5 patch. I bought COD2 and my friends and i still play COD:UO+
+because ...well frankly COD 2 *****. not sure if you have gone on to see how+
+many servers there are... but I see 10 times more servers running COD: UO than+
+COD 2. we buy new computers to play these games under better settings and then+
+find out that you guys don't want to fix them because they are "old" . if the new+
+game wasn't a horrible sequel with no vehicles to drive and many more issues,+
+people would be willing to switch but we are not. thanks, hope you guys listen. in+
+forums all over people talk about these things. COD:UO is still the Bar..+
+everything else falls short. and COD 4 is not a WWII FPS... thats a different+
+catagory so i can't say anything. i will be waiting for that too. thanks,+
+faithful consumer+
*Their last reply:*
Hello,
+We will fix it if possible.+
+I'm going to sit on this e-mail for a couple of days while we discuss some options.+
+I will contact you again in a couple of days.+
+Thanks for your patience.+
+Have a nice day.+
SO..WHAT DO YOU THINK? I Think i made a big enough stink that they actually might try to make a patch that works for us.

Patching 11.5.9

Helo All,
I am working on a 11.5.9 system and have to apply a patch soon. What is the best place to look into manual/documentation on patching. Also if I can have a simple step-by-step big picture of patching before I read any documentation, it will be of greater help.
Thanks

Hi,
Please refer to documents "Oracle® Applications Maintenance Utilities Release 11i (11.5.9) Part No. B10640-01 (Chapter 4)" and "Oracle® Applications Maintenance Procedures Release 11i (11.5.9) Part No. B10641-01 (Chapter 3)"
both chapters contain essential concepts for AutoPatch utility.
HTH.
Kind regards,
Francisco Mtz.

Pchdtv hd-3000 kernel patches

I just purchased an HD-3000 HDTV card from http://www.pchdtv.com. Their instructions are for Fedora Core 2. Since I can't stand Fedora, and I have Arch installed, I was wondering if anyone knew how to install the kernel driver for this card in Arch. On their downloads page, there are kernel patches, but I've never installed a kernel patch before. The patches appear to be for kernel 2.6.3 and 2.6.6. I know that my kernel is 2.6.9. Would I have to go back some kernels in order to use the patch? How does one go about using a kernel patch?
Thanks for any assistance on this topic.

http://www.thegeorges.us/mythtv/
there's a patch on there.

Not Getting SAPKINBC9A upgrade patch for PI_BASIS

Hi All,
I am implementing SPS 12 in my ECC 6.0 System. System is on oracle and linux. My PI_BASIS patch is on 2005_1_700 level and i need to upgrade the same on 2006-1_700. So i cannnot import any of 2006 patch before this component
I am not getting the support pack SAPKINBC9A on OSS. Am i searching right patch or do i need to implement some other patch for this.
Thanks in Advance
Thanks,
Bhanu Pratap Singh

I got the patch. And i have implemented the same with SAINT.

OS 64bit and Oracle 10G with Patch are 32bit

Hello Experts
My problem little bit typical. I am new in Oracle.
I am going to install Solution Manager 4.0 with Oracle 10G on Windows 2003 64bit, IBM x3650 Server.
I have already installed Oracle 10G 32bit, with 32bit patches,. Its a general Oracle without sapserver.cmd file, so I have installed with setup.exe file. I have mounted the database, created the listener.
New there are three directories 1) D:\Oracle\Product\10.2.0\admin\DEV10\adump, bdumpetc. db\admin
2) E:\Oracledata\DEV10\control01.ctl, 02.ctletc.
3) G:\ Archives
Now I am trying to install SOLMAN with sapinst.exe 64bit windows, after giving the export path, it shows the massage Oracle software not installed. Install oracle software first. Means SAP does not recognizing Oracle.
After that I am trying to install with sapinst.ext 32bit, now it is excepting the export path. After two steps it is asking for Kernal & Oracle client path. What is oracle client? I think it is asking for OCL10264.SAR file.
My Questions are:
1. I have to download form market place 32bit or 64bit file?
2. My oracle installation is proper or not.
3. Where I have to uncar that file. Please provide me the proper path, step by step.
4. I am going to the right direction or I am a wrong. Please help me .. I dont want to format the machine.
Please explain me in details step by step. I am in the problem, I have no friends in this line.
Best Regards
Sunil

> My Questions are:
> 1. I have to download form market place 32bit or 64bit file?
if you're installing on 64bit you need to install the 64bit Oracle binaries. And not only those but the actual patch 10.2.0.2 and the necessary interim patches before you can start to load the database. Additionally you should use the provided script to install the database, not setup.exe
Additionally you will need a 64bit JDK from Sun (avaible on the link in note 941595).
> 2. My oracle installation is proper or not.
No - you need a 64bit Oracle - and not the installation CDs downloaded from the Oracle site but those from SAP.
> 3. Where I have to uncar that file. Please provide me the proper path, step by step.
Where you have to uncar WHAT file?
> 4. I am going to the right direction or I am a wrong. Please help me .. I dont want to format the machine.
The proper approach would be to download the installation guide at
http://service.sap.com/instguides
and read all the installation notes, download the patches and install them as suggested in the guide before trying to start the installation. The preparation and planning of the system will take some time before you actually start to install.
A SolMan installation is no Microsoft Office where you do "setup - continue - continue - finish"...
Markus
Markus

Is there a way to find the Time Duration for applying a Patch?

Dear Legends,
Is there a way to find the Installation or Applying time can be gauged for a PATCH, so that it will be useful to provide the DOWNTIME of the server.
Thanks in Advance
Regards,
Karthik singh

karthiksingh_dba wrote:
Dear Legends,
Is there a way to find the Installation or Applying time can be gauged for a PATCH, so that it will be useful to provide the DOWNTIME of the server.
Thanks in Advance
Regards,
Karthik singhNot until you test the patch and install it yourself on one of the instances. Once you apply the patch, you can check the patch log file or the patch analysis report or AD_BUGS table.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Patch+AND+Analysis+AND+Report&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
You can run the patch with apply=n but this will let you to test the patch before applying it only.
http://docs.oracle.com/cd/E18727_01/doc.121/e12148/T531058T531065.htm#adptpptpbai
http://docs.oracle.com/cd/E18727_01/doc.121/e12148/T531058T531062.htm#adptpaucla
Thanks,
Hussein

Problem with applying a patch to zdoom in AUR

I did a little searching and found out about the patch command, but I'm still having some issues with applying this patch. Can anyone help me out? I'm not sure when to be running the patch command and what parameters to use. Thanks in advance.
http://aur.archlinux.org/packages.php?ID=16403
http://mancubus.net/svn/gzdoom/trunk/dumb/src/it/itrender.c?r1=114&r2=354&view=patch

raptir wrote:
The root of the problem is that when running makepkg, you get this:
[ 15%] Building C object dumb/CMakeFiles/dumb.dir/src/it/itrender.o
/home/mike/zdoom/zdoom/src/zdoom-2.3.1/dumb/src/it/itrender.c:3559: error: static declaration of 'log2' follows non-static declaration
make[2]: *** [dumb/CMakeFiles/dumb.dir/src/it/itrender.o] Error 1
make[1]: *** [dumb/CMakeFiles/dumb.dir/all] Error 2
make: *** [all] Error 2
==> ERROR: Build Failed.
Aborting...
The patch provided supposedly fixes that by renaming a function (log2 to mylog2) in itrender.c. I've tried simply running patch -i dumb.patch before running makepkg, but that obviously doesn't work since none of the files are downloaded. I'm guessing that I need to put the patch command somewhere in pkgbuild, I'm just not sure where.
So far, I've just downloaded and extracted the tarball, then I get the above error when running makepkg.
Well you don't need to get the package tarball alone. Get the tarball and open up the PKGBUILD file, see where it gets the source from, then get that source and apply the patch to it. After that you can just compile it yourself...

Applying OBIEE 11g patches

Hi All,
Present we are using OBIEE 11.1.1.6.4 some one is apply 6.4 patches before.Now I need to apply 11.1.1.6.10 patch set.I download all 6.10 patches.our weblogic server version 10.3.5.0
Please Assist how to apply patches on linux environment and can share any document for applying patches.
Thx,
Ani

When i am applying getting bellow error
Oracle Home : /usr/app/oracle/product/11.2.0/client_1
Central Inventory : /usr/app/oraInventory
from : /etc/oraInst.loc
OPatch version : 11.1.0.6.6
OUI version : 11.2.0.1.0
OUI location : /usr/app/oracle/product/11.2.0/client_1/oui
Log file location : /usr/app/oracle/product/11.2.0/client_1/cfgtoollogs/opatch/opatch2013-05-29_15-35-07PM.log
Patch history file: /usr/app/oracle/product/11.2.0/client_1/cfgtoollogs/opatch/opatch_history.txt
ApplySession applying interim patch '16504136' to OH '/usr/app/oracle/product/11.2.0/client_1'
Running prerequisite checks...
Prerequisite check "CheckApplicable" failed.
The details are:
Patch 16504136: Required component(s) missing : [ oracle.bi.biinst, 11.1.1.6.0 ]
ApplySession failed during prerequisite checks: Prerequisite check "CheckApplicable" failed.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 74
[oracle@PDC-CRM-BI01 16504136]$ OPatch failed with error code 74

Patch for upgrading 10g AS from 10.1.2.0.2 to 10.1.2.1

Hi All,
I am in process of doing 10g AS integration with 11.5.10.2.
here as per documentation i have seen that this 10g AS has to upgrade
My 10g AS version is 10.1.2.0.2
The below msg is as per Oracle Documentation
If you are running Oracle Application Server 10g Release 2 (10.1.2.0.0) or Oracle Application Server 10g Release 2 (10.1.2.0.1) Standard Edition One, then apply the Oracle Application Server 10.1.2.1 patch before applying Oracle Application Server Portal Upgrade.
I have searched a lot in metalink for patch but no luck
So please let me know the right patch to upgrade my 10g AS from 10.1.2.0.2 to 10.1.2.1
Also any supporting document for this upgrade
Thanks in advance
Regards,
Bhanu Chander.

I have downloaded patch p5983622_10123_LINUX.zip
and first tried to upgrade infrastructure home
but while upgrading it says
oracle universal installer has detected that your database is version 10.1.0.4.2 before you can continue you must apply a required database patch set.
But in documentation i have seen
Supported Database Releases
The portal schema may be residing in an OracleAS Metadata Repository, or in a customer database. The database in which the portal schema resides must be one of the following supported releases:
Oracle Database 10g (10.1.0.4.2) or later
Please let me know what should i do now
Thanks in advance
Regards,
Bhanu Chander.yes, because the Infrastructure Database needs to be upgraded. And it is listed in the documentation of the same patch set.
In the Readme file for the patch set 3 (5983622 or p5983622_10123_LINUX) as you mentioned, please see Section 5. Before you begin applying this patch set
It reads the following:
"5.6 Applying the Oracle Database 10g Release 1 (10.1.0.5) Patch Set
The Oracle Database 10g Release 1 (10.1.0.5) patch set must be applied to all database instances (for both the Identity Management and Metadata Repository installation type and Metadata Repository only installation type) before applying OracleAS 10g Release 2 Patch Set 3. If OracleAS 10g Patch Set 2 (10.1.2.2.0) has been applied previously, then you do not have to apply the database patch."
hope that explains what you need to do. i.e, your infra DB version is 10.1.0.4.2 and needs to be upgraded to 10.1.0.5.
AMN

Patches Page Empty & won't cache unless added in members tab

I just installed 11.3 and turned on Patch Management for the first time last week.
I've watched the demo on Youtube. I've read all the documentation. Something is just wrong with the system. There are no patches listed on the Patches tab under Patch Management.
The only way that I could actually make it download any bundles was to create a Patch Policy. The Patches tab on the policy is also blank. However I noticed that I could create rules and the would actually create a list. However none of them ever got cached. The only way to get them to cache and create the bundles was to add them manually in the members tab. As soon as I did that, all of the bundles downloaded.
However, they still never show up in any of the patches tabs as patched or unpatched. The Recently Released Patches never lists anything either. They aren't patching on any workstations, and there is no reporting on them. I also tried to see if I could create the old baseline instead of a policy, but as no patches ever show up in the patches tab on a workstation group I can't even do that.
I've see the following KB https://www.novell.com/support/kb/doc.php?id=7014327 but I don't have those errors in my logs. I definitely ran out of space the very first time I finally got it to download and cache the patches, however I've added a ton more space and I reset the server with the "Reset ZENworks Patch Management Settings" button under Configuration -> Subscription Service Information.
I'm at a total loss here. The documentation is not very good about the process of how it should work after it has been setup and configured.
I also have about 40 patches that list as failed in my status tab. Only 5 of them say "Failed to download one or more packages". The rest of them say "Cache request ignored. You must enable the patch before trying again." So what the heck does that mean? The "Cache request ignored" ones all look like patches that probably don't apply to the few workstations that I have the patch policy applied to. If I hover over the gray icon in the members tab of the patch policy for one of these policies it says it is disabled.
I also noticed that on the primary server assigned to be the patch downloader that the dashboard is essentially blank. However on my other primary server, the dashboard has what looks like dummy data populated in it.
Any hints? Has anyone seen this kind of behavior. I am finding it hard to get information on Patch Management 11.3 on the Internet because it is so new I suppose. Help!

casutton,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Patching before AWM 10.2.0.3.0. ????

Similar Messages

Maybe you are looking for