Patching the 9i Install for Pentium 4

I was able to patch my Oracle 8i download to install and run properly on a Pentium 4 by updaring all 1.1.* JDK/JRE entries to 1.1.8_006 and all 1.2.* JDK/JRE entries to 1.2.2_007 (this is all on Win2K). This included three directories and two packaged .jar files.
I haven't had the same luck patching the 9i disks. I found an additional directory and three additional .jre files and patched them, but still no luck.
I've seen some postings on this issue in other locations, but I'm very interested in resolving this install problem. Has anyone else had any luck with this?

Hi!
I've further news. I've tried to install Oracle 9iAS v1.0.2.0 recently, and the hack that I posted yesterday works only for the install process. After a successful setup you still need some patching... Search for the same filename (symcjit.dll) in the Oracle directory (where you installed the Oracle product). Take a look on the version of the JRE where the multiple instances of the symcjit.dll were found. If they are all JRE 1.1.x, then you're lucky, because you only need the symcjit.dll that you downloaded from Sun to make the setup work. Replace the instances in your Oracle directory with the new one.
If you find some symcjit.dll from a newer JRE distibution (as I did in case of the iSuites\Apache\jdk\jre directory), then you have to download the most up-to-date version of the given JRE (it was JRE 1.2.2 in my case), and use the symcjit.dll that you find in the downloaded package to replace the bad library in your Oracle directory.
Here's the link for JRE 1.2.2 download (if somebody needs it): http://java.sun.com/products/jdk/1.2/jre/download-windows.html

Similar Messages

  • I purchased the Logitech F310 game controller for my 2011 MacBook Pro. How do I get the driver installed for it. The Disk that came with the controller is a mini disk and will not insert into my laptop.

    I purchased the Logitech F310 game controller for my 2011 MacBook Pro. How do I get the driver installed for it. The Disk that came with the controller is a mini disk and will not insert into my laptop.

    May not make a difference anyway. The Logitech support site does not show drivers for Mac OS for the F310:
    http://www.logitech.com/en-us/support/gamepad-f310?crid=411
    I'd contact their support to find out if there is a Mac driver available, and if they can either give you a web link to get it, e-mail you the software, or snail-mail you a standard-size disk with the drivers.

  • I have just purchased a macbook air and have the iWorks installed for free. Can I download those iWorks apps to my iPad 3 with the same account for free

    I have an iPad 3 with iOS 6.1.3 and I would like to download the iWork's apps for free. I have just bought a Macbook air and have those apps installed in that computer. i just updated my system to OS X Maverick. I have iCloud connection between both of my devices. Thanks ahead

    Thanks a lot I hoped there was a way like updating my iPad would help or smt but it ***** that they only made it free for some idevices...

  • I began the download/install for 10.7.2 and it appears to have frozen my macbook pro.  Should I force a reboot?

    It just says moving items into place.  It has been spinning for some time at about 70%.  Wondering if I shuold force a shutdown and restart.

    First things first, did you backed up your data?
    I would let it stay for the night to see what happens, if by tomorrow the computer is still stuck at 70% I would suggest calling Apple to see what would be the appropiate steps to troubleshoot the issue. Their number is 1-800-MY-APPLE.
    Good Luck!
    BTW, what is your MacBook Pro model? 2011, 2010, or 2009?

  • I have paid the monthly installment for Premier Pro CC but it is still showing expired in Creative Cloud window. How come?

    I have tried many method like using Adobe Creative Cloud Cleaner to clean everything and reinstall again. However, it is still  failed. This is really a super disappointed experience....

    You can refer to this also: Creative Cloud website shows trial options after purchase | CS6, CCM
    Regards
    Rajshree

  • Permission problem when trying to patch the kernel

    Hello, my name is Rodrigo and I have a VAIO laptop. The problem with it is that it has soo many privative components that are very hard to get to work under Linux. Fortunately, I found a project http://code.google.com/p/vaio-f11-linux/, which aims to provide full suport to VAIOs in Linux.
    In order to do this I had to patch the Kernel http://code.google.com/p/vaio-f11-linux … nelSupport
    So I started to follow the instructions.
    1) I downloaded from kernel.org the lastest stable release (2.6.39)
    2) I made cd /usr/src/linux and unpacked the tar contnents from the kernel file into this directory
    3) I made "sudo curl http://www.absence.it/vaio-acpi/source/ … 6.39.patch | patch p1" and I got this:
    patching file include/linux/sonypi.h
    patch: **** Can't rename file /tmp/poSN3DW6 to include/linux/sonypi.h : Permission denied
    I don't know if I'm the problem or if the patch is "bad".I already submitted the problem to the Issues page from the project, but maybe I made something wrong, any help would be apreciated
    Rodrigo

    I don't think sudo was meant for strange things like downloading a patch and then piping it into the patch command. If you want that to work, you should either run "su" to make sure you are root beforehand, or split up the commands like so:
    sudo curl http://www.absence.it/vaio-acpi/source/patches/vaio-2.6.39.patch >vaio-2.6.39.patch
    sudo patch p1 <vaio-2.6.39.patch
    The generic instructions for using this patch will probably work but it will be cleaner if you look at the wiki page for Arch's take on custom kernels.
    Last edited by ConnorBehan (2011-05-25 03:15:06)

  • Where are the lens profiles for newer Nikon DSLR products?

    There is hardly anything for D800 and newer lenses like 24-120 f/4, 70-200 f/4, 28-300 f/3.5-5.6, etc. Also, I have Lens Profile Downloader 1.0 installed and it works, but I cannot update to 1.0.1. It refules to install:

    24-120 f/4, 70-200 f/4, 28-300 f/3.5-5.6, etc. Also, I have Lens Profile Downloader 1.0 installed and it works, but I cannot update to 1.0.1. It refules to install:
    There is a Adobe supplied profile in the standard install for the 28-300 (NIKON D3X (Nikon AF-S NIKKOR 28-300mm f3.5-5.6 ED VR) - RAW) and for the 24-120 (NIKON D3X (Nikon AF-S NIKKOR 24-120mm f4G ED VR) - RAW). Those profiles will work fine for those lenses used on any Nikon body, including crop bodies. The 70-200 f/4 is too new I guess but I am sure it will show up soon. I don't have one (yet) otherwise I would have put up one already as it is trivial to generate these lens profiles yourself.

  • Is it a good idea to use the A/C adapter without the battery installed?

    Hi everyone!
    I have a question. When using my iBook, is it a good idea or is it adviceable to power my iBook using the A/C adapter only, without the battery installed - for the purpose of preserving my battery? I tend to use my iBook heavily and as a desktop computer replacement.
    My iBook is a G4 1.33 Ghz 12" model running OS X Version 10.4.10 and my peripherals are optical mouse, keyboard, powered speakers and an external hard drive.
    Thanks.
    iBook G4   Mac OS X (10.4.10)  

    Well the service manual says:
    "Warning: Never turn on the computer unless all of its internal parts are in place and it is fully reassembled. Operating the missing parts can damage the computer or cause injury."
    Without a battery in place the battery connector would be exposed and things always find their way into the opening. I've heard of people keeping a bad battery in place just for that reason. Also if you keep it plugged in all the time it won't lose it's date/time.
    If you check "set Date & Time automatically" in the "Date & Time" system preferences the iBook will automatically reset the time if you have a internet connection.
    Richard

  • I need the full install version rather than the install stub file. Multiple computer installs save internet bandwidth when the full install is downlo

    I need the full install for firefox, to install on multiple computers. Multiple Firefox downloads uses too much internet data download budget. I cannot find a link to the full install. Satellite internet has limited data usage budgets.

    http://mozilla.mirrors.tds.net/pub/mozilla.org/firefox/releases/latest/
    Select your computer, then language, then download the Setup File (not stub)

  • How to install XI and the Pre-requisties for the same?

    Hi !
    I want to install XI in my system. Can anyone tell me what are the prerequisties before installing XI and also the installation procedures ..
    Thnx,
    Laawanya

    Hi,
    as with follow this steps
    1. WINDOWS OS (PREFERABLY 2003 SERVER) ENTERPRISE SERVER WITH SUPPORT PACK 1
    2. INSTALL THE NECESSARY APPLICATIONS SUCH AS MS-OFFICE, WINZIP ETC..
    3. IF IT IS A STANDALONE SYSTEM U NEED TO CONFIGURE THE MICROSOFT LOOP BACK ADAPTER AS THE SAME SYSTEM SHOULD ACT AS BOTH CLIENT AND SERVER..
    So for this go to control panel click ADD NEW HARDWARE , there choose new hardware and click the radio button of install new hardware, and choose manually the Network Adapter there goto Microsoft LoopBack Adapter *
    4. GO TO THE RUN IN WINDOWS TYPE AS DRIVERS THERE U FIND THE DIRECTORY OF *ETC * AND FROM THERE GO TO HOSTS AND SPECIFY THE STATIC IP ADDRESS WHICH WAS CREATED IN THE ABOVE STEP AND SPECIFY THE NAME OF THE MACHINE AS SAP TRANSHOST IF IT IS A STAND ALONE SYSTEM.
    ipaddress    Name of the Machine(SAP TRANSHOST)  ==> this must be defined in the hosts file..
    5. NOW SET THE VIRTUAL PAGE REPLACEMENTS BASED ON THE RAM SIZE USED IN YOUR MACHINE THE BASIC LOGIC IS 3 TIMES MORE THAN THE ACTUAL RAM SIZE.
    *Eg: for 1GB --- 1024 * 3 so, the initial set was 3072*
    to configure this right click MY COMPUTER go to ADVANCED there again go to ADVANCED and u find the SETTINGS there u choose the Advanced there u can see the INITIAL SET specify the value based on the RAM SIZE
    6. INSTALL JAVA * J2SDK1_4_14 *   CREATE THE CLASS PATH FOR THE JAVA ..
    To configure this right click MY COMPUTER goto ENVIRONMENT VARIABLES  there create a class path, by choosing New
    Here choose Java Variable as JAVA_HOME  and Java Value as PATH OF THE BIN FILE OF INSTALLED JAVA
    7. INSTALL ORACLE 10 G  i.e  Oracle patches need to be installed.
    8. Take the BACKUPS of the CDs or DVDs in your hard disk, and the partition of the hard disk make work area to 100 GB and the dump area remaining, Now from the dump area backup go to the SAP Product  --- Installatiion Master  --- SAPINST.EXE
    when u come to the servers part, it is quite differient when compared with XI3.0 and PI7.0 and at the same time in PI we have a provision of installing the both java and abap as central instance and when u see in XI3.0 u need to sepatrately configure for both java and ABAP, as a whole in concern we dont see separately in the servers part..
    Here choose the components of Netweaver which u require while configuring the receivers part..
    Deploy the ADAPTERS by importing the XI7_0_SAP_BASIS_7.00_10_00.tpz
    9. To add support pack TCODE was SPAM (SAP Support Pack Manager).,
    10. To Create a new Client use TCODE as SCC4
    11. Check the Tcode-- SICK ( It Shows whether any dependent objects are not consistently installed)
    12. Finally download the SAP BASIS component in the IR..
    for SLD Configuration...
    SLD can be classified into 2 as
    1. Software Catalog
    2. System Catalog
    Software catalog consists with Products and Software Components.
    If u know Ms-Office we can understand better, Ms-Office is an Product in which Ms-Word and Ms-Excel and others are the components of the Ms-Office product in similar any object created in XI should store under any software component so we require a Software Component and at the same time this Software Components should be under Products, so we are creating products the hierarchy will be like this for software catalog
    PRODUCTS -
    >>> SOFTWARE COMPONENTS -
    >> NAMESPACES CREATED DURING DESIGN -
    > OBJECTS
    System Catalog consists with Techinal System and Business System
    Technical System is the physical entity but where as the Business System is the logical system of the Technical System..
    i.e an n number of business systems are created for a singel Technical system.
    Basically while developing the scenarios it is difficult to share the technical system so we develop instance of the technical system i,e a logical system.
    feel free to post any queries regarding installation..
    regards,
    Kishore

  • How to Install and apply the Diagnostic Pack for Fusion Middleware on EM

    Hi
    we have installed ADF Runtime along with Enterprise Manager on IBM-AIX-64-BIT-7.1 version. now, we are planning to install the Diagnostic pack for fusion middleware inorder to monitor the ADF Application deployed on weblogic 10.3.6 server from Enterprise Console. Can anybody suggest, the diagnostic pack for fusion middleware compatability version for our OS,weblogic 10.3.6.
    Regards
    Nagaraju Manchala

    Hi Nagaraju,
    The packs just represent packaged licensing and usually don't need to be installed. However, I assume you are referring to the Diagnostic Pack for Oracle Middleware. If so, the functionality is actually not part of Enterprise Manager Cloud Control. All of the WLS and FMW management features are licensed via WebLogic Management Pack EE or the appropriate FMW pack licensing such as SOA Management Pack EE for SOA Suite and OSB and Management Pack for Oracle WebCenter for WebCenter and UCM. The Diagnostic Pack for Oracle Middleware includes the standalone AD4J and JRMC diagnostic tools which can be downloaded from e-Delivery and installed separately. It is solely dedicated to diagnostics at the end of the day as opposed to monitoring.
    Most prefer WLS Management Pack EE for monitoring and managing WebLogic and Oracle App Server apps along with the RUEI product, but you definitely can take advantage of AD4J and JRMC today. It should be noted that WLS Management Pack EE allows the usage of JVM diagnostics as well which is much broader in its 24/7 diagnostics and monitoring capabilities at the JVM level than the standalone AD4J component. In addition, the diagnostics is supplemented with the middleware diagnostics advisor, performance summary and composite application dashboards, diagnostic snapshots, and other functionality. In addition, WLS Management Pack EE includes all of the configuration management (config compare, compliance policies, patch tracking, etc) and lifecycle management features (domain and Java EE provisioning, patch automation). Anyways, it is probably just easier to take a look at the self-running demos for the features on OTN under EM and YouTube in the WebLogic Server or Oracle Learning channels.
    Also, to your oriiginal point, you don't need to install the pack. You can discover WLS and FMW targets out of the box immediately. There are additional components you can download under the EM umbrella such as Real User Experience Insight (RUEI - monitors actual user activity on the front-end and associates it with EMCC targets) and Business Transaction Management (BTM - formerly AmberPoint, which provides payload aware business transaction monitoring). Both RUEI and BTM data integrates with EMCC via the Business Application dashboard, so you can still have a single console view of your application even though the RUEI and BTM components are installed separately.
    -Glen

  • Adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem

    Hi,
      I got this message after importing about ten or so H.264 files that I encoded from Adobe media encoder.  "adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem."
    The files we're shot with HD cameras.  Edited in Premiere Pro CS3.  I installed the update 3.0.1 with still the same error.
    I also tried a brand new project and after about ten or so files being imported into a timeline, the system crash.  I tried this twice....
        Thanks in Advance

    Hi Hunt,
           Here is the skinny.  A window base PC.  footage shot with HD sony HD cameras,  Project imported to Premiere CS3.  Once completed sent file to Adobe media encoder and render them as H.264 widescreen high Quality.  Imported them to Adobe Encore CS3.  After about ten files or so.  I got the error message.  Did all the basic trouble shoot like restarting the computer, got latest patch.  Even build a new test project with the same problem.
        Something else I read in the forums, is the encore will transcoded the project to Mpeg 2 anyway, after looking at my project I realized those few files were indeed untranscoded.  So it will be a double compression and I dont want that.  So, my new question is, what is H.264 good for ?????????? I was research that Mpeg 2 is a faster render but H.264 is a slower render but better quality.....
       what do you think ????
       Peter

  • What is the best approach for patch management

    Hi,
    I'm new about patch management. I would like to ask you how manage patch on few Solaris 10 servers using command line.
    I would like to know:
    1. Using only command line how to download latest patches
    2. There are some dependencies how to check this and install only those patches which meets dependecy requirements?
    3. Is there possiblity to atomate this?
    4. Is it possible to have one patch server and others servers will download and install this patches?
    5. What if some patches are not installed?
    6. How to find out which patches are necessary and which patches don't have to be installed? Or maybe or patches to be installed?
    7. Could you please describe your approach for managing patches? Or maybe you can recommend some books/web page/articles that can help me to understand patch management.
    Thanks in advance,
    Daniel

    smpatch is the command line tool to manage solaris patching. first you need to register yours system - this can be done using sconadm, detailed here:
    http://sunsolve.sun.com/search/document.do?assetkey=1-9-82688-1
    smpatch analyze will list all required patches and resolve dependencies. smpatch download will download all the required patches, and smpatch update will apply them. You can set up a Local Patch Server to download patches, then your clients will download the patches they require from it. This is detailed in chapter 6 of the update connection admin guide

  • Adobe upgrade error : The upgrade patch cannot be installed..."

    Hi,
    I work in an office and while I was trying to patch up some computers that have Adobe 7.0 Pro (others have 8.0 Pro), I received the following message
    "The upgrade patch cannot be installed by windows installer service because the program to be updated may be missing, or the update patch may update a different version of the program. Verify that the program to be updated exists on your computer and that you have the correct update patch"
    I would like to mention that I used the check for update option and did not manually download the patches. Also, this problem seemed to occur on computers where adobe was not registered...
    Any comments and suggestions will be appreciated.
    Thanks

    Be sure to install the updates in order from the current version, unless the info on the update says otherwise. The updates are available on the download>updates part of the Adobe site, with comments of order.

  • When trying to update Acrobat XI I get a 1328 error each time. I have uninstalled XI and reinstalled it from disk. When trying to update the newly installed XI I still get the 1328 error. I have searched my C: drive for the file C:\config\Msi\PTA082.tmp b

    When trying to update Acrobat XI I get a 1328 error each time. I have uninstalled XI and reinstalled it from disk. When trying to update the newly installed XI I still get the 1328 error. I have searched my C: drive for the file C:\config\Msi\PTA082.tmp but with no sucess. Any suggestions?

    Hi Berriedale,
    Please try the below steps and check.
    Turn off any antivirus or software security program.
    Download the update patch 11.0.10 manually from the below link and run it.
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5859
    Regards,
    Anand

Maybe you are looking for