Patching through Deployment Procedures

Hi
I try to patch my databases 10.2.0.4 (CPU Oct release) through Deployment Procedures in Grid Control but its failing on Step: stagePatchStageApply without any warnings or comments. (Everything was working until GC crashed because of lack of space on filesystem. I have deleted the old files from softwareLibrary and restarted GC. OS reboot do not help as well.). Besides patching all is working well.
OS: Enterprise Linux 4.

Paste the emoms.trc meanwhile Can you try by setting up another software lib

Similar Messages

Error - on using deployment procedures to patch a RAC cluster - 10.2.0.5

I am using EM grid control 10.2.0.5. Using the deployment procedures to patch to a target host ucmlab that is on server devorclrac001.yeoman.dev.
Here is the output log from the error. Any ideas. It appears to look like configuration missing.
Thank you
Output Log
Downloading the patches from My Oracle Support.
Building the runtime data for the deployment procedure ...
Processing Target "ucmlab.yeoman.dev" on Oracle Home "/opt/app/oracle/product/10.2.0/db_1", Host "devorclrac001.yeoman.dev":
For Target "ucmlab.yeoman.dev" patch will be applied to Oracle Home "/opt/app/oracle/product/10.2.0/db_1" on Host "devorclrac001.yeoman.dev".
Processing Target "ucmlab.yeoman.dev" on Oracle Home "/opt/app/oracle/product/10.2.0/db_1", Host "devorclrac002.yeoman.dev":
For Target "ucmlab.yeoman.dev" patch will be applied to Oracle Home "/opt/app/oracle/product/10.2.0/db_1" on Host "devorclrac002.yeoman.dev".
Target "ucmlab.yeoman.dev" has a non-shared Oracle Home.
Targets present in the Target List (Target Name, Host, Oracle Home):
ucmlab.yeoman.dev,devorclrac001.yeoman.dev,/opt/app/oracle/product/10.2.0/db_1
ucmlab.yeoman.dev,devorclrac002.yeoman.dev,/opt/app/oracle/product/10.2.0/db_1
Oracle Homes being patched (Host, Oracle Home):
devorclrac001.yeoman.dev,/opt/app/oracle/product/10.2.0/db_1
devorclrac002.yeoman.dev,/opt/app/oracle/product/10.2.0/db_1
Following Error(s) Occured :
Property "NodeName" is not found for target "devorclrac001.yeoman.dev" of type "host"
Property "NodeName" is not found for target "devorclrac002.yeoman.dev" of type "host"
CAUSE: Insufficient Configuration Properties for the target(s)
ACTION: Recompute the properties for the Agent with the target being in 'UP' status.
(i) Run the following commands on the Agent of the target:
$ emctl stop agent
$ emctl start agent
(ii) Run the following command: $ emctl reload agent dynamicproperties

I decided to uninstall the agent, remove the target from EM and reinstall. It appears to be a little better. I get a different error now with the "opatch upgrade" step.
I checked and OPATch_update job has already ran successfully once and software components have been downloaded once.
Command Arguments: expandPatch -oh /opt/app/oracle/product/10.2.0/db_1 -pa_stage_loc /opt/app/oracle/product/10.2.0/agent10g/EMStage -i 6880880 -f p6880880.zip, Current Dir: /home/oracle
Running: /opt/app/oracle/product/10.2.0/agent10g/sysman/admin/scripts/osm/ecmPatchDatabase.pl
Argument count: 9
Perl version: 5.008003
Hostname: devorclrac002.yeoman.dev
Operating system: linux
Time: Tue Jul 14 14:49:36 2009
Unpacking patch file p6880880.zip in /opt/app/oracle/product/10.2.0/agent10g/EMStage/6880880...
/opt/app/oracle/product/10.2.0/agent10g/bin/unzip -o p6880880.zip
Archive: p6880880.zip
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of p6880880.zip or
p6880880.zip.zip, and cannot find p6880880.zip.ZIP, period.
---------- Error Message ----------
Error: 009
Could not unpack p6880880.zip
----------- End Message -----------
expandPatch failed

Fusion Middleware Provisioning Deployment Procedure - Failing

Hi,
I have been trying to run the Fusion Middleware Provisioning (version 4.1) deployment procedure by choosing the existing installation as Fusion Middleware Home.
Going through the logs, the perl script (applyclone.pl) is unable to create the destination directory. However, I am unable to find the cause for it. Also, the directive "Create FMW Clone Archive" generates the following log - with error "Oracle home is not cloneable".
Any help would be highly appreciated. Thanks.
Below are details :
OEM version 11g installed on Linux box.
Source Machine - Windows, Agent version 11g
Target Machine - Windows, Agent version 11g
- Dinu
Logs -
Job Log -
Run privilege of the step is : Normal
This is Provisioning Executor Script(Windows)
Input PropertyFilePath is D:\Agent11g\agent11g\EMStage\PAF\Job_931f3d44a76852aae040b40a7f161fef\properties
Input directiveScriptFilePath is D:\Agent11g\agent11g\EMStage\PAF\Job_931f3d44a76852aae040b40a7f161fef\applyClone.pl
Input directiveTypeProperty is NAME_Executor
Input componentPath is null
Input directivePath is Directive
Input componentFilename is null
Directive Type is SUB_Perl
Dir to CD is D:\Agent11g\agent11g\EMStage\PAF\Job_931f3d44a76852aae040b40a7f161fef
Final command line to execute is %PERL_HOME%\perl "D:\Agent11g\agent11g\EMStage\PAF\Job_931f3d44a76852aae040b40a7f161fef\applyClone.pl" -java_home "D:\Agent11g\agent11g/jdk" -cloning_jar "cloningclient.jar" -archive "D:\wkd//20101102061046/wls_prov/archive.jar" -mwhome "D:\fmwtest" -log_dir "D:\wkd//20101102061046" -work_dir "D:\wkd//20101102061046"
The output of the directive is:
Unable to create directory at D:\Agent11g\agent11g\EMStage\PAF\Job_931f3d44a76852aae040b40a7f161fef\applyClone.pl line 38.
Creating directory: D:\wkd//20101102061046/wls_prov/
Creating MW directory:
OMS Log (For brevity's sake, only mentioning from the point it says 'Failed')
INFO: _receiving event StatusChangedEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 931F3D44A76752AAE040B40A7F161FEF , data = null , reason = Job Failed]
Nov 2, 2010 6:20:29 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: ProcedureStateImpl [ Inst Name: Fusion Middleware Provisioning_2010-11-02_06-10-46PM GUID: 918CBF4A67A5FADDE040B40A7F161FDE ]: Received Event: StatusChangedEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 931F3D44A76752AAE040B40A7F161FEF , data = null , reason = Job Failed]
Nov 2, 2010 6:20:29 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: ProcedureStateImpl [ Inst Name: Fusion Middleware Provisioning_2010-11-02_06-10-46PM GUID: 918CBF4A67A5FADDE040B40A7F161FDE ]: Received Event: StatusChangedEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 931F3D44A76752AAE040B40A7F161FEF , data = null , reason = Job Failed]
Nov 2, 2010 6:20:29 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: ParallelStateImpl [ Phase Name: FMWPROV_TRS_CLONE_ARC_TO_MWH_NAME GUID: 931F3D44A75E52AAE040B40A7F161FEF ]: Event recd: StatusChangedEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 931F3D44A76752AAE040B40A7F161FEF , data = null , reason = Job Failed]
Nov 2, 2010 6:20:29 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: ParallelStateImpl [ Phase Name: FMWPROV_TRS_CLONE_ARC_TO_MWH_NAME GUID: 931F3D44A75E52AAE040B40A7F161FEF ]: Broadcasting event to all child states
Nov 2, 2010 6:20:29 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: ParallelStateImpl [ Phase Name: FMWPROV_TRS_CLONE_ARC_TO_MWH_NAME GUID: 931F3D44A75E52AAE040B40A7F161FEF ]: Firing event StatusChangedEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 931F3D44A76752AAE040B40A7F161FEF , data = null , reason = Job Failed] to tgtState TargetStateImpl [ TargetName: IFLMUD5HP0645.i-flex.com TargetType: host GUID: 931F3D44A75F52AAE040B40A7F161FEF ]
Nov 2, 2010 6:20:29 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: TargetStateImpl [ TargetName: IFLMUD5HP0645.i-flex.com TargetType: host GUID: 931F3D44A75F52AAE040B40A7F161FEF ]: Received Event: StatusChangedEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 931F3D44A76752AAE040B40A7F161FEF , data = null , reason = Job Failed]
Nov 2, 2010 6:20:29 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: JobProducerStateImpl [ Step Name: FMWPROV_APPLY_CLONE_TRG_NAME GUID: 931F3D44A76752AAE040B40A7F161FEF ]: Receive Event: StatusChangedEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 931F3D44A76752AAE040B40A7F161FEF , data = null , reason = Job Failed]
Nov 2, 2010 6:20:29 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: JobProducerStateImpl [ Step Name: FMWPROV_APPLY_CLONE_TRG_NAME GUID: 931F3D44A76752AAE040B40A7F161FEF ]: Updating job status: 4 of this state and saving to repository
Nov 2, 2010 6:20:29 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: JobProducerStateImpl [ Step Name: FMWPROV_APPLY_CLONE_TRG_NAME GUID: 931F3D44A76752AAE040B40A7F161FEF ]: Step failed, firing status update event
Nov 2, 2010 6:20:29 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
INFO: JobProducerStateImpl [ Step Name: FMWPROV_APPLY_CLONE_TRG_NAME GUID: 931F3D44A76752AAE040B40A7F161FEF ]: [Updating status: STEPGUID = 918CBF4A5F83FADDE040B40A7F161FDE STATEGUID = 931F3D44A76752AAE040B40A7F161FEF STEPNAME = FMWPROV_APPLY_CLONE_TRG_NAME OLDSTATUS = Running NEWSTATUS = Failed ]
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: JobProducerStateImpl [ Step Name: FMWPROV_APPLY_CLONE_TRG_NAME GUID: 931F3D44A76752AAE040B40A7F161FEF ]: error mode stop on error.
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: JobProducerStateImpl [ Step Name: FMWPROV_APPLY_CLONE_TRG_NAME GUID: 931F3D44A76752AAE040B40A7F161FEF ]: Processing event StatusUpdateEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 931F3D44A76752AAE040B40A7F161FEF , reason = Job Failed , status = Failed]
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: JobProducerStateImpl [ Step Name: FMWPROV_APPLY_CLONE_TRG_NAME GUID: 931F3D44A76752AAE040B40A7F161FEF ]: Updating job status: 4 of this state and saving to repository
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: TargetStateImpl [ TargetName: IFLMUD5HP0645.i-flex.com TargetType: host GUID: 931F3D44A75F52AAE040B40A7F161FEF ]: Processing event StatusUpdateEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 931F3D44A76752AAE040B40A7F161FEF , reason = Job Failed , status = Failed]
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: TargetStateImpl [ TargetName: IFLMUD5HP0645.i-flex.com TargetType: host GUID: 931F3D44A75F52AAE040B40A7F161FEF ]: Setting status to : Failed
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
INFO: TargetStateImpl [ TargetName: IFLMUD5HP0645.i-flex.com TargetType: host GUID: 931F3D44A75F52AAE040B40A7F161FEF ]: [Updating status: STEPGUID = 918CBF4A5F80FADDE040B40A7F161FDE STATEGUID = 931F3D44A75F52AAE040B40A7F161FEF STEPNAME = FMWPROV_TRS_CLONE_ARC_TO_MWH_NAME OLDSTATUS = Running NEWSTATUS = Failed ]
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: TargetStateImpl [ TargetName: IFLMUD5HP0645.i-flex.com TargetType: host GUID: 931F3D44A75F52AAE040B40A7F161FEF ]: Firing status update event to parent.
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: TargetStateImpl [ TargetName: IFLMUD5HP0645.i-flex.com TargetType: host GUID: 931F3D44A75F52AAE040B40A7F161FEF ]: Processing event StatusUpdateEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 931F3D44A75F52AAE040B40A7F161FEF , reason = Job Failed , status = Failed]
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: ParallelStateImpl [ Phase Name: FMWPROV_TRS_CLONE_ARC_TO_MWH_NAME GUID: 931F3D44A75E52AAE040B40A7F161FEF ]: processing event StatusUpdateEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 931F3D44A75F52AAE040B40A7F161FEF , reason = Job Failed , status = Failed]
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: ParallelStateImpl [ Phase Name: FMWPROV_TRS_CLONE_ARC_TO_MWH_NAME GUID: 931F3D44A75E52AAE040B40A7F161FEF ]: Setting status to : Failed
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
INFO: ParallelStateImpl [ Phase Name: FMWPROV_TRS_CLONE_ARC_TO_MWH_NAME GUID: 931F3D44A75E52AAE040B40A7F161FEF ]: [Updating status: STEPGUID = 918CBF4A5F80FADDE040B40A7F161FDE STATEGUID = 931F3D44A75E52AAE040B40A7F161FEF STEPNAME = FMWPROV_TRS_CLONE_ARC_TO_MWH_NAME OLDSTATUS = Running NEWSTATUS = Failed ]
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: ParallelStateImpl [ Phase Name: FMWPROV_TRS_CLONE_ARC_TO_MWH_NAME GUID: 931F3D44A75E52AAE040B40A7F161FEF ]: Firing status update event to parent. ParallelStateImpl [ Phase Name: FMWPROV_TRS_CLONE_ARC_TO_MWH_NAME GUID: 931F3D44A75E52AAE040B40A7F161FEF ]
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: ParallelStateImpl [ Phase Name: FMWPROV_TRS_CLONE_ARC_TO_MWH_NAME GUID: 931F3D44A75E52AAE040B40A7F161FEF ]: Processing event StatusUpdateEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 931F3D44A75E52AAE040B40A7F161FEF , reason = Job Failed , status = Failed]
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: ProcedureStateImpl [ Inst Name: Fusion Middleware Provisioning_2010-11-02_06-10-46PM GUID: 918CBF4A67A5FADDE040B40A7F161FDE ]: Processing event StatusUpdateEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 931F3D44A75E52AAE040B40A7F161FEF , reason = Job Failed , status = Failed]
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: ProcedureStateImpl [ Inst Name: Fusion Middleware Provisioning_2010-11-02_06-10-46PM GUID: 918CBF4A67A5FADDE040B40A7F161FDE ]: Setting status to : Failed
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
INFO: ProcedureStateImpl [ Inst Name: Fusion Middleware Provisioning_2010-11-02_06-10-46PM GUID: 918CBF4A67A5FADDE040B40A7F161FDE ]: [Updating status: STEPGUID = 918CBF4A5FBAFADDE040B40A7F161FDE STATEGUID = 918CBF4A67A5FADDE040B40A7F161FDE OLDSTATUS = Running NEWSTATUS = Failed ]
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: ProcedureStateImpl [ Inst Name: Fusion Middleware Provisioning_2010-11-02_06-10-46PM GUID: 918CBF4A67A5FADDE040B40A7F161FDE ]: Firing status update event to parent.
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: ProcedureStateImpl [ Inst Name: Fusion Middleware Provisioning_2010-11-02_06-10-46PM GUID: 918CBF4A67A5FADDE040B40A7F161FDE ]: Processing event StatusUpdateEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 918CBF4A67A5FADDE040B40A7F161FDE , reason = Job Failed , status = Failed]
Nov 2, 2010 6:20:32 PM oracle.sysman.pp.paf.engine.impl.BaseStateImpl log
CONFIG: ProcedureStateImpl [ Inst Name: Fusion Middleware Provisioning_2010-11-02_06-10-46PM GUID: 918CBF4A67A5FADDE040B40A7F161FDE ]: Discarding event: StatusUpdateEvent [ instance = 918CBF4A67A4FADDE040B40A7F161FDE , state = 918CBF4A67A5FADDE040B40A7F161FDE , reason = Job Failed , status = Failed]
Logs for "Create FMW Clone Archive" Job -
Run privilege of the step is : Normal
This is Provisioning Executor Script(Windows)
Input PropertyFilePath is D:\Agent11g\agent11g\EMStage\PAF\Job_931f3d44a75952aae040b40a7f161fef\properties
Input directiveScriptFilePath is D:\Agent11g\agent11g\EMStage\PAF\Job_931f3d44a75952aae040b40a7f161fef\createClone.pl
Input directiveTypeProperty is NAME_Executor
Input componentPath is null
Input directivePath is Directive
Input componentFilename is null
Directive Type is SUB_Perl
Dir to CD is D:\Agent11g\agent11g\EMStage\PAF\Job_931f3d44a75952aae040b40a7f161fef
Final command line to execute is %PERL_HOME%\perl "D:\Agent11g\agent11g\EMStage\PAF\Job_931f3d44a75952aae040b40a7f161fef\createClone.pl" -cloning_jar "cloningclient.jar" -archive "D:\wkd//20101102061046/archive.jar" -mwhome "C:\oracle\Middleware" -exp "*.xxx" -soh "n/a" -log_dir "D:\wkd"
The output of the directive is:
Creating directory: D:\wkd//20101102061046/
created.
found WLS Home:C:\oracle\Middleware\wlserver_10.3
got C:\oracle\Middleware\wlserver_10.3
Reading properties from C:\oracle\Middleware\wlserver_10.3\.product.properties
JAVA_HOME=C:\Oracle\Middleware\jdk160_14_R27.6.5-32
C:\Oracle\Middleware\jdk160_14_R27.6.5-32\bin\java.exe
D:\wkd//20101102061046/archive.jar
Executing: C:\Oracle\Middleware\jdk160_14_R27.6.5-32\bin\java.exe -jar "C:\oracle\Middleware\oracle_common\jlib\cloningclient.jar" createclone -al "D:\wkd//20101102061046/archive.jar" -smw "C:\oracle\Middleware" -silent true -ldl D:\wkd
Log File : "D:\wkd\CLONE2010-11-02_06-12-27PM.log" .
Error File : "D:\wkd\CLONE2010-11-02_06-12-27PM.error" .
2010-11-02_06-12-28PM : INFO : CLONE-21130 The component Dummy Top Component under Oracle home C:\oracle\Middleware\oracle_common is not cloneable.
2010-11-02_06-12-28PM : INFO : CLONE-21130 The component Bogus under Oracle home C:\oracle\Middleware\oracle_common is not cloneable.
2010-11-02_06-12-28PM : ERROR : CLONE-20280 Oracle home is not cloneable.
2010-11-02_06-12-28PM : CAUSE : CLONE-20280 Some component(s) under the Oracle home C:\oracle\Middleware\oracle_common were not cloneable.
2010-11-02_06-12-28PM : ACTION : CLONE-20280 Make sure that all components in the Oracle home are cloneable.
2010-11-02_06-12-28PM : INFO : CLONE-21009 The list of Middleware home that will be included in the archive is =
C:\oracle\Middleware .
2010-11-02_06-12-28PM : INFO : CLONE-21013 Primary validation prior to clone operation is successful for C:\oracle\Middleware.
2010-11-02_06-12-28PM : INFO : CLONE-21154 Checking free space availability for createClone operation.
2010-11-02_06-12-30PM : INFO : CLONE-21155 Required free space is available for createClone operation.
2010-11-02_06-12-32PM : INFO : CLONE-21095 Create archive for C:\oracle\Middleware started .... at 2010-11-02_06-12-32PM.
2010-11-02_06-12-32PM : INFO : CLONE-21166 Addition of the Middleware home C:\oracle\Middleware to the archive started....
2010-11-02_06-12-34PM : INFO : CLONE-21167 Creating archive of Middleware home C:\oracle\Middleware ....
2010-11-02_06-15-35PM : INFO : CLONE-21168 Creating archive of Middleware home C:\oracle\Middleware finished .
2010-11-02_06-15-35PM : INFO : CLONE-21169 Adding archive of Middleware home C:\oracle\Middleware to the main jar file started.....
2010-11-02_06-15-35PM : INFO : CLONE-21053 Total size of the file(s) , to be included in the main jar from source location D:\wkd = 0.421 GB .
2010-11-02_06-16-49PM : INFO : CLONE-21055 100% completed in "73" seconds, and "0" more seconds required.
2010-11-02_06-16-49PM : INFO : CLONE-21170 Adding archive of Middleware home C:\oracle\Middleware to the main jar file finished .
2010-11-02_06-16-49PM : INFO : CLONE-21096 Time taken for this process =257015 milli sec.
2010-11-02_06-16-49PM : INFO : CLONE-21030 Adding "C:\oracle\Middleware" to the archive is successful.
2010-11-02_06-16-53PM : INFO : CLONE-21031 Time taken to add all the cloners to archive ="262,266" milli seconds .
2010-11-02_06-16-53PM : INFO : CLONE-21032 Archive created successfully at D:\wkd\20101102061046\archive.jar.
2010-11-02_06-16-53PM : INFO : CLONE-21006 Total time taken by cloningclient ="265" seconds .
2010-11-02_06-16-53PM : INFO : CLONE-21007 Cloning operation completed successfully.
Executing: C:\Oracle\Middleware\jdk160_14_R27.6.5-32\bin\jar.exe uf D:\wkd//20101102061046/archive.jar -C C:\oracle\Middleware\oracle_common\jlib cloningclient.jar
found WLS Home:C:\oracle\Middleware\wlserver_10.3
got C:\oracle\Middleware\wlserver_10.3
Reading properties from C:\oracle\Middleware\wlserver_10.3\.product.properties
JAVA_HOME=C:\Oracle\Middleware\jdk160_14_R27.6.5-32
MW_HOME=C\:\\Oracle\\Middleware
Java Home is installed outside of FMW Home - Agent JDK will be bound to this WLS installation
JavaExternal=true
Executing: C:\Oracle\Middleware\jdk160_14_R27.6.5-32\bin\jar.exe uf D:\wkd//20101102061046/archive.jar -C D:\wkd\20101102061046 extra.info
Cloning Successful
Cleaning up files after successful run...
unlink D:\Agent11g\agent11g\EMStage\PAF\Job_931f3d44a75952aae040b40a7f161fef\createClone.pl
unlink D:\Agent11g\agent11g\EMStage\PAF\Job_931f3d44a75952aae040b40a7f161fef\invoke.pl
unlink D:\Agent11g\agent11g\EMStage\PAF\Job_931f3d44a75952aae040b40a7f161fef\invoke.sh
unlink D:\Agent11g\agent11g\EMStage\PAF\Job_931f3d44a75952aae040b40a7f161fef\properties
unlink D:\Agent11g\agent11g\EMStage\PAF\Job_931f3d44a75952aae040b40a7f161fef\provisioningUtil.pl
rmdir D:/Agent11g/agent11g/EMStage/PAF/Job_931f3d44a75952aae040b40a7f161fef
Successfully deleted all leftover files and directories.
Edited by: user13299429 on Nov 2, 2010 11:15 PM

CHeck this thread:
BINDING.JCA-12510 JCA Resource Adapter location error in SOA 11g Suite
Did you have set the correct parameters to the DBAdpater; it look lik it can not bind the parameters (BINDING JCA-12563).
Marc

Provisioning weblogic domain thr FMW Provisioning Deployment Procedure

I have successfully created a replica of the Fusion Middleware Home through the Fusion Middleware Deployment Procedure, but am not able to deploy the weblogic domain using the same.
I am providing all the inputs/details required in the procedure , but at the end while submitting the procedure it shows .. some values are invalid.
I am not able to get any logs or any information on the invalid values.
The steps where I provide the inputs are :
1) Select Source
2) Select Target
3) Configure Domain
4) Scehdule Deployment
5) Review
and after this when i submit it .. am not able to submit.
Pls provide guidance for it.

Hi,
In order to install Forms and Reports , Weblogic on windows server the prerequisites needs to be met :-
Assign Proper ip, hostname & domain name
Entry of ip, host name & domain name in etc/hosts file
Disable anti-virus if any
Disable ipv6
Disable Windows Firewall, Windows Update & Windows Management Instrumentation at Service level (services.msc)
Create 2 folder "tmp" & "Java" for temp, jdk & jre installation. And set the path of installed jdk in Environment Variable
RAM - Minimum 4GB (Recommended)
HDD - C & D with 20-50GB
Regards,
Prakash.

OEM 12c export Deployment Procedure - partool

Hello,
We want to export a Deployment Procedure with the emctl partool utility (E27046-01-D.4 Exporting Deployment Procedures). Before we export the procedure we need to control the Software Library: $ORACLE_HOME/bin/emctl partool check.
When we run the command we get an Error:
ERROR !
Software Library has not been setup !
Please configure Software Library and try again.
But from our point of view we have set up the Library, because you need to have one for the Agent deployment. Under Enterprise/Provisioning and Patching/Software Library I can see the different folders of the Software Library.
We checked the log files for any changing right after the execution of the check command (bash-3.2$ find -name *.log -amin 2) but there were no entries in any log file.
What do we have to do to eliminate this error?
Thanks in advance

This is a bug and we are working on the fix for this issue. This issue is with "partool check" command only, all other partool commands are fine.
For now, customers should ignore this error if they have already setup the swlib.
Edited by: user780562 on 08-Mar-2012 02:24
Edited by: user780562 on 08-Mar-2012 02:27

Missing Deployment Procedures

Does anyone know how to find and download Oracle Database Provisioning procedure for OEM Grid 10.2.0.3.0? I am applied all of the patches required for provisioning, but the procedure does not show up under deployment procedure manager.

Hi
How did you resolve this?
THanks
D

One Step DVD From VCR Patched Through Mini-DV

I guess the One Step method only works with Device Control inputs?
I've got my VCR patched through my MiniDV camera, and a Firewire cable to the Mac. When I choose One Step DVD, it looks for a tape in my camera. But I can capture in FCP with this same setup.
I guess iDVD 5.0 won't let me capture this way? I don't see any preferences I can change.
Also, is there a maximum length of capture in iDVD 5.0?
Thanks!

I guess the One Step method only works with Device Control inputs?
Yep - OneStep will not work witout timecode.
from http://docs.info.apple.com/article.html?artnum=300735
Note: OneStep DVD will only capture from recorded tape on a DV camcorder or deck. OneStep DVD will not work with analog-to-DV converters. It will also not work if you are using your camcorder or deck as a pass-through device to digitize from an analog souce (such as VHS or Hi-8). In order to function, OneStep DVD reads the timecode from your DV tape and it relies on DV device control to communicate with the camera or deck.
G5dual2GHz, 550TiBook, 9600>G3Upgraded Mac OS X (10.4.3) 1TB+ Storage

Verification of the existence of an email account and reading it through a procedure?

Good afternoon,
I wonder if there is any possibility of verifying the existence of an email account through a procedure?
And there is also the possibility to learn to read a particular email and store in a temporary table.
Thank you

That's not possible.
Many mail servers are configured not to send bounce messages if an invalid email address is specified. If a mail server allows a bounce message, it becomes easy for spammers to compile a list of valid email addresses for the domain by trying various common combinations (i.e. [email protected], [email protected], etc.). So you can't do it across every possible valid email address in the entire internet.
What is the actual problem you are trying to solve, though? It seems highly unlikely that if you have email addresses that are part of an ERP that you really need to do this blindly. What do you use the email addresses for? Does the recipient have some reason to want to receive the emails that are sent to that address? If so, it would generally make sense to let the recipient verify the address periodically. On sign-up, assuming you are dealing with individuals outside of your company, you can send them a confirmation message that contains a link they need to click on to activate their account in order to verify that the email address they are providing is correct.
Justin

How to retrive data through stored procedure in mysql from remote machine?

Hello everybody,
I am having problem in accessing data of mysql through stored procedure. It works fine if I use "jdbc:mysql://localhost:3306/[database name]" instead of "jdbc:mysql://[IP address]:3306/[database name]". The connection is fine for both, but when stored procedure is called the system stops at "stmt.execute();" line in java file while debuging. In case of localhost there is no any problem. The code for connecting procedure is:
stmt = dbConn.prepareCall("{? = call testing()}"); stmt.registerOutParameter(1, Types.VARCHAR); stmt.execute();
I have to connect java application running in Windows to the mysql database running in remote machine(RHEL 5).
I am using "mysql-connector-java-5.1.5-bin.jar", jdk 1.5.0 and remote database Mysql version : 5.0.22.
There is no exception and application hangs at stmt.execute();
Can anybody help me with this problem?
Thank you.

I got it. its about connection...

Sending Long Raw Data to Oracle database through Stored Procedure

Hi,
I am trying to push data to Oracle 9i database through Stored Procedure via thin driver. It is going smoothly upto 29411 bytes. But it is not accepting for 53843 bytes and giving following error :
java.sql.SQLException: Data size bigger than max size for this type: 53843
Is it thin driver limitation? Can I solve it by using OCI driver? Or is there any other approach?
I tried creating connection pool in weblogic 7.0 through OCI driver. But I am not able to configure it. Is there any special way of configuration.
Quick response will be greatly appreciated.
Thanks
Sanjiv

It happens to me. But I am using CMP of Weblogic 7. If you write your own jdbc code, the following link may be helpful.
http://otn.oracle.com/sample_code/tech/java/codesnippet/xmldb/HowToLoadLargeXML.html

Insert Into Vs Insert through a Procedure

Hi All,
I want to make a comparison between insertion into a table through normal insert into staement and through a procedure.
I create a table call test_table with 6 columns and a procedure to insert in that table.
I opened a session that make normal insert for 32 times and another session that uses the procedure to insert for 39 times. My experience says that insertion through a procedure is faster than normal insert into statement. but when i make trace for both sessions here is the results:
Session1(Normal Insert)
INSERT INTO TEST_TABLE
VALUES(:"SYS_B_0", :"SYS_B_1", :"SYS_B_2", :"SYS_B_3", :"SYS_B_4", :"SYS_B_5")
call count cpu elapsed disk query current rows
Parse 32 0.00 0.00 0 0 0 0
Execute 32 0.01 0.02 0 32 129 32
Fetch 0 0.00 0.00 0 0 0 0
total 64 0.01 0.03 0 32 129 32
Misses in library cache during parse: 1
Optimizer mode: CHOOSE
Parsing user id: 125 (CALLCNTR44)
Rows Execution Plan
0 INSERT STATEMENT MODE: CHOOSE
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 32 0.00 0.00 0 0 0 0
Execute 32 0.01 0.02 0 32 129 32
Fetch 0 0.00 0.00 0 0 0 0
total 64 0.01 0.03 0 32 129 32
Misses in library cache during parse: 1
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 0 0.00 0.00 0 0 0 0
Execute 0 0.00 0.00 0 0 0 0
Fetch 0 0.00 0.00 0 0 0 0
total 0 0.00 0.00 0 0 0 0
Misses in library cache during parse: 0
32 user SQL statements in session.
0 internal SQL statements in session.
32 SQL statements in session.
1 statement EXPLAINed in this session.
Trace for Session2(Procedure Insert)
BEGIN sec1.INSERT_INTO_TEXT_TABLE (); END;
call count cpu elapsed disk query current rows
Parse 39 0.04 0.00 0 0 0 0
Execute 39 0.00 0.00 0 0 0 39
Fetch 0 0.00 0.00 0 0 0 0
total 78 0.04 0.01 0 0 0 39
Misses in library cache during parse: 1
Optimizer mode: CHOOSE
Parsing user id: 125 (CALLCNTR44)
INSERT INTO TEST_TABLE
VALUES('TEST COL1', 'TEST COL2', 'TEST COL3', 'TEST COL4', 'TEST COL5', 'TEST COL6')
call count cpu elapsed disk query current rows
Parse 0 0.00 0.00 0 0 0 0
Execute 39 0.03 0.00 0 0 80 39
Fetch 0 0.00 0.00 0 0 0 0
total 39 0.03 0.00 0 0 80 39
Misses in library cache during parse: 0
Optimizer mode: CHOOSE
Parsing user id: 474 (SEC1) (recursive depth: 1)
Rows Execution Plan
0 INSERT STATEMENT MODE: CHOOSE
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 117 0.04 0.02 0 0 0 0
Execute 117 0.03 0.03 0 0 0 78
Fetch 39 0.03 0.00 0 312 0 0
total 273 0.10 0.06 0 312 0 78
Misses in library cache during parse: 3
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 2 0.00 0.00 0 0 0 0
Execute 41 0.04 0.01 0 0 80 39
Fetch 2 0.00 0.00 1 5 0 2
total 45 0.04 0.02 1 5 80 41
Misses in library cache during parse: 2
118 user SQL statements in session.
2 internal SQL statements in session.
120 SQL statements in session.
1 statement EXPLAINed in this session.
So in session 2 parsing of the procedure it self is still done in each execution but for the statment inside it no and in session1 parsing for the insert is done for every execution. So does this proof my knowledge or it is wrong?
I see that instead of parsing the insert in session1 there is parsing for the procedure in session2 is that correct?
Thanks in advance

Tomy3k_Bakr, you are doing the comparison wrong. Are you running these from sqlplus over and over again? Sqlplus parses every statement you send, this is not the correct way to compare.
Try this instead.
YAS@10G>create table t (a number,b number,c number);
Table created.
YAS@10G>r
1 create or replace procedure insert_t(pa number,pb number,pc number) as
2 begin
3     insert into t values(pa,pb,pc);
4* end;
Procedure created.Run this and see the results.
exec RUNSTATS_PKG.rs_start;
begin
for i in 1..10000 loop
     insert /*+ sql */ into t values(i,i,i);
end loop;
end;
exec RUNSTATS_PKG.rs_middle;
begin
for i in 1..10000 loop
     insert_t(i,i,i);
end loop;
end;
exec RUNSTATS_PKG.rs_stop;
Run1 ran in 124 hsecs
Run2 ran in 139 hsecs
run 1 ran in 89.21% of the time
Name                                  Run1        Run2        Diff
LATCH.list of block allocation           1           0          -1
STAT...redo ordering marks              92          91          -1
STAT...table scans (short tabl           3           2          -1
LATCH.session idle bit                  27          26          -1
LATCH.In memory undo latch               0           1           1
LATCH.file cache latch                   3           2          -1
LATCH.redo allocation                    8           7          -1
LATCH.archive process latch              1           0          -1
LATCH.Consistent RBA                     2           3           1
LATCH.lgwr LWN SCN                       3           2          -1
LATCH.mostly latch-free SCN              3           2          -1
LATCH.KMG MMAN ready and start           1           0          -1
LATCH.compile environment latc           3           2          -1
LATCH.session timer                      0           1           1
LATCH.shared pool                        2           3           1
STAT...change write time                11          12           1
STAT...table scan blocks gotte           6           4          -2
STAT...messages sent                     2           4           2
STAT...data blocks consistent            3           1          -2
LATCH.channel operations paren           8           6          -2
STAT...rollbacks only - consis           3           1          -2
STAT...cleanout - number of kt          27          31           4
STAT...index fetch by key                6           2          -4
STAT...cluster key scans                 6           2          -4
STAT...active txn count during          27          31           4
STAT...deferred (CURRENT) bloc           6           2          -4
STAT...consistent changes               20          24           4
STAT...consistent gets - exami          39          35          -4
STAT...session cursor cache hi          11           7          -4
STAT...CR blocks created                 6           2          -4
STAT...commit cleanouts succes           6           2          -4
STAT...commit cleanouts                  6           2          -4
STAT...workarea memory allocat           5           1          -4
STAT...calls to kcmgcs                  27          31           4
STAT...execute count                10,014      10,009          -5
LATCH.active checkpoint queue            5           0          -5
STAT...opened cursors cumulati          14           8          -6
STAT...db block changes             20,324      20,318          -6
LATCH.redo writing                      14           8          -6
STAT...parse count (total)              14           8          -6
STAT...CPU used when call star         131         138           7
STAT...calls to kcmgas                 101          94          -7
LATCH.undo global data                  50          43          -7
STAT...no work - consistent re          15           7          -8
LATCH.dml lock allocation               12           4          -8
STAT...DB time                         132         140           8
STAT...cluster key scan block           12           4          -8
LATCH.library cache lock                16           8          -8
STAT...buffer is not pinned co          12           4          -8
LATCH.messages                          27          17         -10
STAT...db block gets from cach      10,484      10,473         -11
STAT...db block gets                10,484      10,473         -11
STAT...enqueue releases                 24          13         -11
STAT...enqueue requests                 24          13         -11
STAT...recursive cpu usage              96         107          11
STAT...Elapsed Time                    127         140          13
LATCH.enqueues                          35          22         -13
STAT...redo entries                 10,181      10,195          14
STAT...CPU used by this sessio         124         138          14
LATCH.library cache pin             20,072      20,056         -16
LATCH.cache buffers lru chain          135         153          18
STAT...table scan rows gotten           54          36         -18
STAT...calls to get snapshot s          37          19         -18
LATCH.library cache                 20,094      20,073         -21
LATCH.enqueue hash chains               50          26         -24
STAT...bytes received via SQL*       1,210       1,185         -25
STAT...consistent gets                  91          63         -28
STAT...consistent gets from ca          91          63         -28
STAT...free buffer requested           118         152          34
STAT...session logical reads        10,575      10,536         -39
LATCH.row cache objects                153         106         -47
LATCH.checkpoint queue latch            57           0         -57
LATCH.SQL memory manager worka          73           6         -67
LATCH.cache buffer handles              16          84          68
STAT...recursive calls              10,132      10,053         -79
LATCH.object queue header oper         334         437         103
LATCH.cache buffers chains          51,652      51,526        -126
LATCH.session allocation               258         104        -154
STAT...free buffer inspected           448         188        -260
LATCH.simulator lru latch              440         865         425
LATCH.simulator hash latch             458         892         434
STAT...hot buffers moved to he       1,222         276        -946
STAT...undo change vector size     684,064     682,932      -1,132
STAT...redo size                 2,586,108   2,583,908      -2,200
Run1 latches total versus runs -- difference and pct
Run1        Run2        Diff       Pct
94,017      94,489         472     99.50%For runstats see http://asktom.oracle.com/tkyte/runstats.html.

Update Yes/No field in access table through oracle procedure

Hi,
How to update Yes/No field in access table through oracle procedure. all other fields like AutoNumber, Text I can update it. Yes/No field how to update? Please, any one can help me?
Thanks and Regards,
Sudha.

Sudha Teki wrote:
select "fldPost" from tblPHd@ODBCLNKNot quite sure what you mean, but the way you select the column would indicate a case sensitive column name
Look at this example
SQL> create table t
2 ("this" varchar2(10))
3 /
Table created.
SQL> insert into t values ('hello')
2 /
1 row created.
SQL> select *
2    from t
3 /
this
hello
SQL> select this
2    from t
3 /
select this
ERROR at line 1:
ORA-00904: "THIS": invalid identifier
SQL> select "this"
2    from t
3 /
this
helloIs your column name also case sensitive?

Return a parameter through stored procedures

Hello Experts
I want to return parameter through stored procedures so as to ensure that the application has been executed properly.
My source message format is
<StatementName5>
<storedProcedureName action=u201D EXECUTEu201D>
<table>Summarize_prc</table>
<empid [isInput=u201Dtrueu201D] [isOutput=true] type=SQLDatatype>val1</empid>
</storedProcedureName >
</StatementName5>
Do i need to put some extra parameters for return values from the stored procedures?
What would be the response message format to return the parameters from stored procedure.
Thanks
Sabyasachi

Hi,
If you wants to read the return values from stored procedure, the scanario should be designed as Sync.
The format looks like thsi
<Message Type Name>
      <STATEMENTNAME_response>
                  <Field1> </Field1>
   </STATEMENTNAME_response>
</Message Type Name>

Mapping runs through Deployment Manager but hangs in Process Flow

Hi,
I have a Mapping bound in a simple Process Flow.
The mapping deploys through Deployment Manager and runs. It currently processes no rows and takes a couple of seconds to do that. It completes with a Success message.
However, when I wrap it into a simple Process Flow...
--- w ---> END_WARNING
START ---> MY_MAPPING ---- s ---> END_SUCCESS
--- e ---> END_ERROR
.., deploy this and run it through the Deployment Manager, it hangs. I get the 'Execution in progress...' window with the moving graphic forever.
The Runtime Repository Browser Execution Report tells me that it is 'Busy', and if I drill down to the Process Flow Run Execution Report, I see an identical Start and End Time, an Elapsed Time of 0 seconds, and no other details (Execution Parameters, Activity Details or Error Messages).
Looking under 'Find Processes' on the Workflow Home Page, my workflow has no status in the Process List. Drilling down to the Diagram, I have a green line from the 'Start' element to my Mapping but the Mapping itself has no special colour.
I go back to the Deployment Manager and cancel the job - which it does and reports that it 'Completed with errors'.
The Runtime Repository Browser Execution Report now tells me that it is 'Busy' (with an information bubble), and if I drill down to the Process Flow Run Execution Report, I see different Start and End Times, and Elapsed Time of n seconds, a single Error Message 'RPE-01002: The operation was aborted at user request.', and no other details (Execution Parameters, Activity Details).
Looking under 'Find Processes' on the Workflow Home Page, my workflow has a status of 'Complete' in the Process LIst. Drilling down to the Diagram, I still have a green line from the 'Start' element to my Mapping and the Mapping itself still has no colour and no indication that it has stopped.
I'm running:
Oracle9i EE 9.2.0.5.0
Oracle10g OWB Client 10.2.0.1.0
Oracle10g OWB Repository 10.1.0.1.0
Anybody know how I can go about tracking down why this Process Flow is hanging - and, of course, getting it unhung :-)
Regards
Steve

Hello Steve,
It's a little difficult to read the exact flow from your ASCII graphics.
However, from your description it seems your workflow task only has an outgoing success connector, and your execution was not a success. This will stop the execution of that branch of your process flow, since there are no valid routes to take. If you only have a single branch in your workflow, the process flow is stuck.
To expedite your hung process you just click on the task icon in the Workflow Monitor graph window that does not have a green outgoing connector, press the Expedite button and select skip.
Corollary: If you use conditional connectors, always use all 3 from a task. I not using all 3, have a very good understanding of why you don't.
Regards, Hans Henrik

How to get hostname from targetlist in custom deployment procedure?

When I make a simple procedure with a phase that will loop through a procedure hostname list
and a hostcmd or directive inside that will use the hostname ex change a configuration file. How to get hostname from the hostname targetlist?
I would rather not use $(hostname) or similar function if I can get the hostname from the target list.
Edited by: user476601 on 2012-09-06 05:59

I have tried that and cannot get it to work.
I have tried to make a procedure with:
parameter
- parallel fase
- step directive with hostname parm based on simple sh script (echo $hostname)
- map hostname setvalue %TargetName%
In a hostcmd step you cannot access %TargetName% directly
it doesn't work. Please come with an example if you have tried it.
/René

Patching through Deployment Procedures

Similar Messages

Maybe you are looking for