Patchset 10.2.0.5 (required for Windows 7 64-bit)

Am I right in thinking this isn't freely available - only access route I can find mentioned seems to be via some sort of support contract.
Anyone know why Oracle is restricting access to this when 11 is available?

Hi;
Am I right in thinking this isn't freely available - only access route I can find mentioned seems to be via some sort of support contract.Correct, you need valid CSI number to can connect metalink download patch from metalink
Anyone know why Oracle is restricting access to this when 11 is available?Ask this to oracle not us :)
Regard
Helios

Similar Messages

DRIVERS REQUIRED FOR WINDOWS 7 (32-BIT) - FOR HP Pavilion g6-2004tu Notebook

Hi everybody!
Today have formatted my Notebook and changed the OPERATING SYSTEM to Windows 7 (32-Bit) (Enterprise Edition)
Need basic drivers for the my HP Pavilion g6-2004tu Notebook for the following devices, currently being Yellow Highlighted by the Device Manager:
1. Ethernet Controller
2. Network Controller
3. PCI Device
4. PCI Simple Communications Controller
5. SM Bus Controller
6. Some Unknown Device
7. USB Mass Storage Device (Although it is reading the Flash Drive)
Your help is requested and reply is anxiously awaited.
Thanks in advance.
Best Regards,
Faraz
This question was solved.
View Solution.

Hello mike_farhat. I understand you're looking for drivers for your G6.
Unfortunately there are no drivers available specifically for Windows 7 32-bit. However, here is a link to the drivers for Windows 7 64-bit.
Another thing you could try is to install both the HP Software Framework and HP Support Assistant. Then you can run HP Support Assistant and the application will scan your PC and automatically download and install any drivers which are available.
I hope this helps. Have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

DRIVERS REQUIRED FOR WINDOWS 7 (64-BIT) - FOR HP Pavilion g6-1201sm Notebook

Hi everybody!
Today have formatted my Notebook and changed the OPERATING SYSTEM to Windows 7 (64-Bit) (Home Edition)
Need basic drivers for the my HP Pavilion g6-1201sm Notebook for the following devices, currently being Yellow Highlighted by the Device Manager:
1. Ethernet Controller
2. Network Controller
3. PCI Device
4. SM Bus Controller
Your help is requested and reply is anxiously awaited.
Thanks in advance.

http://www.ma-config.com/en
http://techpp.com/2010/01/12/identify-and-find-drivers-for-unknown-devices-in-windows/
good luck

Sytem Requirements for Windows .exe published as aggregator project in CV6 (Windows 7, 64 bit)

Dear all,
I am using CV6 for Windows (7, 64 bit, German version) and just published an aggregator .exe consisiting of 13 .swf files. It seems as if it the .exe runs fine in most of the times.
However, some (international) customers have problems starting the .exe though the FlashPlayer has been installed, and (German!) CV Aggregator info boxes of error messages will come up.
The box below says that the FlashPlayer version installed is not the latest one. The latest FlashPlayer version has been installed successfully, but without affecting the existing FlashPlayer installation (????). Doubleclick the .exe file again.
In other words, the .exe cannot be started not even with the latest FlashPlayer installed.
Could you please list all Windows system requirements for running this .exe.
Thank you very much!

The support article on Firefox "hanging" has a few pointer on Firefox failing to fully shut down and clean up after itself. Does anything here help:
https://support.mozilla.org/en-US/kb/firefox-hangs-or-not-responding#w_firefox-hangs-when-you-quit-it

Windows App Certification Toolkit fails on Certification requirements for Windows desktop apps Point 5.5

Using the latest Version 3.4 of Windows App Certification Toolkit to check Windows 8.1 compatibility our Installer was not approved on:
Certification requirements for Windows desktop apps
5.5 Your app installer must create the correct registry entries to allow successful detection and uninstalls
But all necessary settings are done and after the installation of our application we will find all settings in the registry.
We use an MSI Installer embedded in a bootstrapper exe. The MSI Installer is made with the WiX Toolset V3.6.
The same Application Installer got approved on November, 2014.
We checked this issue against the latest version of MSThreatModelingToolkit installer which also was made with WiX toolset and it fails, too.
So is there a higher restriction or do we miss anything?

Hi Wibudev,
I would suggest you to double check if you have miss something in registry, per documentation mentioned, the installation module must create the following registry entries during installation:
DisplayName
InstallLocation
Publisher
UninstallString
VersionMajor or MajorVersion
VersionMinor or MinorVersion
WACK 3.4 is the latest version, I don't think there would be any higher restriction but I will recommend you to test with another computer to see if the validate fails again. Sometimes the issue could be on the PC environment.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can't get itunes to work for windows xp 64 bit

I can't get itunes to work for windows xp 64 bit. It won't even download.

These are the Windows requirements according to the iTunes dpownload site http://www.apple.com/uk/itunes/download/http://:
Windows XP Service Pack 2 or later; 32-bit editions of Windows Vista, Windows 7 or Windows 8
64-bit editions of Windows Vista, Windows 7 or Windows 8 require the iTunes 64-bit installer
xp 64 bit is not mentioned but it doesn't seem to be supported for the latest ITunes so it seems that you're out of luck.

Is there a "SCCM Package For Windows 7 (64-bit)" for an X220?

Hey all,
i found the "SCCM package for Windows 7 (32-bit) and (64-bit)" for ThinkPad X230s here...
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS034785
...but is there one for the X220s as well? I only see ones for M82, M92p M92, and X230
any help would much appreciated.

That sounds great - actually based on our early research that is exactly the route we've decided to go.
I don't see a document linked in your post, would you mind re-linking?
Specifically, we'll want to include drivers for lots of x210, x220 and x230 varieties - and there are a lot of them that I don't have available for testing - they are many miles away.
Appreciate the help!
EDIT - I found the document linked in another thread and we've used it to pull in all the drivers we require for the 4 models in our environment. thanks!
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/dml_ur_ti_mdt_2.0.pdf

Help downloading & using Illustrator for Windows Vista 32 bit laptop

Hello everyone:
I'm new to Adobe forums and would like to ask if anyone knows how to work around using Illustrator for Windows Vista 32 bit laptop. I tried twice, yet won't allow download due to "system requirements." I'm trying to start with a free trial. Thanks for the assist in advance!

As Mike said, CS6 is the last version to support Vista.
Download CS6 products
Creative Suite 6
Mylenium

Reg. hp laser 1010 driver for windows 7 64 bit

i required HP laserjet driver software for windows 7 64 bit. i unable to get in net. kindly help me to resolve the issue

Hello VGSHEKAR,
Welcome to the HP Support Forums!
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Drivers for CANOSCAN 3200F for Windows 7 64 bit

Canon CANOSCAN 3200f drivers for windows 7 64 bit. I am unable find the drivers and which are from windows showing not compatible. any solution

Please check with Canon on this. They're the right people who can help with the required/applicable drivers.
Arnav Sharma |
Facebook | Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other
community members reading the thread.

Re: Informatica 9.5 for window 8 64 bit Download

You can download it here. But check for viruses at first before installation:https://www.crocko.com/f/7F96462EDAD611E09676002481FAD55A/Informatica_9.0.1# ________________________________________________________________________________Finally found. http://www.essaytrust.org will write you an essay according to your requirements.

Hi All, Could you please provide me the link for downloading informatica 9.5 for window 8 64 bit thanks in advance RegardsShamim Khan

Hp deskjet 5940 drivers for windows xp 32 bit

hello!
who can help me find a driver for windows xp 32 bit for my hp deskjet 5940?? the drivers that you download from hp website is for xp 64 bit!
thanks
Ans

thanks for your help!
I tried this but it does not work for my windows xp 32 bit!
I have tried many a driver but I can not find anyone!
I do not know what to do ...

HP Officejet 4255 driver for Windows 7, 32 bit. Not in pull up list or OS(can't update)

HP Officejet 4255 driver for Windows 7, 32 bit.
Driver is not in pull up list and not in OS(can't update OS basic). Almost all series are listed but 4200 series is missing.
After upgrade to Windows 7, it has become a problem. Some solution should be given.
Can someone help?
Regards,
Raul

Ok, I found in the Net the drive 7uw706ww.zip, which is Version 6.1.4.2, while the updated version is 6.1.10.5 (7UW708WW).
I tried again the GPS, and it wasn't working.
Anyway, before downgrading, I tried to reinstall the new driver, downloading and installing the .exe instead going through System Update.
Result: now GPS is working (same place, same conditions, just 5 minutes later)!
Don't know where the difference is...
600, R52, T61p, X301

HT1349 Trying to install latest iTunes for Windows 7 64-bit. Keep getting this error message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."

Initially iTunes would not run although it had been running quite well up until now. Suddenly received this error on PC start-up "The program can't start because MSVC80.dll is missing from your computer. Try reinstalling the program to fix this problem." Research on Net pointed me to iTunes as the issue. Tried to start iTunes and received that message again. Tried installing latest version of 64-bit iTunes and received the subject message part way through the install: Trying to install latest iTunes for Windows 7 64-bit. Keep getting this error message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."
iTunes has been running great on this PC for years. What's up?
Ron

See Troubleshooting issues with iTunes for Windows updates.
tt2

Cannot install Boot Camp 3.2 upgrade for Windows 7 64 bit

I recently installed Windows 7 64 bit on my macbook. I also installed Boot Camp 3.0.1 after Windows 7 installation, however, WiFi did not work. Therefore, I needed to upgrade to the latest Boot Camp 3.2. However, when I tried to install Boot Camp 3.2 upgrade for Windows 7 74 bit, I got an error message saying that I needed Boot Camp 3.1 installed first. I CANNOT find Boot Camp 3.1 upgrade for Windows 7 64 bit on Apple website at all. Can someone please help me on this? Is there a way to get the complete Boot Camp 3.2 package that can simply be installed on version 3.0.1??

here is the link to bootcamp 3.1 for windows 7 64 bit http://support.apple.com/kb/DL1336 .. and no there is no package that can be applied to the windows side to go from 3.0.1 to 3.2

Patchset 10.2.0.5 (required for Windows 7 64-bit)

Similar Messages

Maybe you are looking for