Patchset 10.2.3.2 and Error OUI-10091

Hello,
when I'm trying to install patchset 10.2.3.2 on OAV collection agent with OUI (previous version is 10.2.3.0 and patchset on server is already done), in window Product-Specific Prerequisite Checks are all checks marked as succeeded. After I click next, the following error appears:
OUI - 10091: There are no patches that need to be applied from the patchset Oracle Audit Vault 10g Release 2 Patch Set 2 10.2.3.2.0.
Does anybody have any idea?
thank you

POTENTIAL/POSSIBLE CAUSE:
Oracle Universal Installer (OUI) will throw the message due to reasons :
Oracle Software might be already on 10.2.3.2.Please start the sqlplus and check the banner for the version to make sure that the version of the software.
You might be applying the patchset 10.2.3.2 on a wrong ORACLE_HOME.
The Local inventory may be corrupted.
POTENTIAL/POSSIBLE SOLUTION:
Make sure that you are applying the patchset on top of the correct Oracle Home.
Make sure that the inventory is healthy.Check if OPatch is able to list all the products.
% OPatch lsinventory -detail
( if local inventory is corrupted, the only ways is to reinstall the software)
Then continue with the installation

Similar Messages

OUI-10091 error, while upgrading from 10.2.0.1 to 10.2.0.2

Hi,
While upgrading from from 10.2.0.1 to 10.2.0.2, im prompted with OUI-10091 error,
i tried to find out in google...but couldn't(incomplete answers)
Help me on how to proceed and install the ptach.
Regards,
- Sri

I guess troubled u lot.. but this what the README says:
Note:
If you attempt to install this patch set in an Oracle home directory that does not contain an Oracle Database 10g release 10.2.0.1 or 10.2.0.2 installation, Oracle Universal Installer displays a warning dialog with the following error:
OUI-10091: There are no patches that need to be applied from the patch set Oracle Database 10g Release 2 Patch Set 2
10.2.0.3
The Oracle Universal Installer does not allow the installation to proceed. Click OK, then click Cancel to end the installation.
Log on as a member of the Administrators group to the computer on which you are going to install Oracle components. If you are installing on a Primary Domain Controller or a Backup Domain Controller, log on as a member of the Domain Administrators group.
Start Oracle Universal Installer located in the unzipped area of the patch set. For example, Oracle_patch\setup.exe.
On the Welcome screen, click Next.
In the Specify Home Details Screen, select the name of the Oracle home that you want to update, or select the Path that you want to update from the list, then click Next
If you are installing the patch set on an Oracle RAC cluster, click Next when the Selected Nodes screen appears.
Regards,
- Sri

OUI-10091:There are no patches that need to be applied from the patchset

Hi All,
when i try to apply 10.2.0.3 patch on 10.2.0.1 in linux x86 I am getting into this error.
OUI-10091:There are no patches that need to be applied from the patchset Oracle Db 10g R2 Patchset 10.2.0.3.0
The original ora inventory is lost and cannot be recovered.
So is there any way I can upgrade the database software.
Please advise.
thanks in Advance
-PK

You should first try to troubleshoot the missing inventory issue. Check this metalink document:
OUI-67105 Due To Missing Or Corrupted Central Inventory In 10g
Doc ID: Note:417236.1
~ Madrid

Error: OUI.exe Stopped Working 11g R2 32-bit Client on Win 7 64-bit

I am receiving an error "oui.exe stopped working" when running setup.exe to install Oracle 11g R2 (win32_11gR2_client.zip for Win 32-bit) client on Windows 7 Enterprise 64-bit. I never even get as far as the Oracle installation dialog box. I am trying to install 11g R2 32-bit because it is my understanding the 64-bit version of Oracle client is not compatible with Toad for Oracle.
I have read numerous posts on the subject and have tried just about everything I can think of to get around the error. When I run the setup.exe -debug I can see that teh files are unzipped and the installer seems to fail when it hit the section where it tries executing java.exe. Once the dialog box appears with the error message, I am not able to get back to the command window to extract the debug results. I can only see it partially in the background behind the dialog box. When I hit cancel to close the error dialog, the debug window also closes, so no way to get the details of the debug results
I am logged into Win 7 as a member of the Adminstrators group and have verified that the Windows User Access Control (UAC) is turned off. I get the erorr message whether I run as Administrator or not. I have unzipped all the files and folders under the \client directory from the zip file to a folder c:\temp\. So the setup.exe and all folders below it are in the c:\temp directory. I did this because one post suggested an issue with long path names or path names with spaces when executing setup.exe.
Seems like it should not be this difficult. I never had issues in the past installing Oracle client on Windows XP Pro. This is my first attempt at installing under Win 7.
Any help or direction would be much appreciated.
Edited by: user10421280 on Nov 21, 2011 1:27 PM

orafad and PavanG,
First let me thank you both for your multiple attempts to help me. I finally figured out what was causing the issue with the Oracle Installer, oui.exe not running properly. Last night I was looking around into the Windows Event Viewer and found an Error entry for oui.exe that pointed to a program directory and .dll in the \\program files\appsense\ directory path. It seems that in addition to the McAfee virus scan, host intrusion, unwanted programs, group policy manager, etc., there is another application installed on the machine that governs what programs can and cannot run. I don't know much about it other than when the program was temporarily suspended, the setup.exe and oui.exe install kicked off fine without the "oui.exe stopped working" error message. It proceeded happily to the Oracle Client installation dialog. All along our IT desktop support was trying to help me with the install and they repeatedly disabled the McAfee programs to no avail, but not the other utilities. It was almost like even they were unaware of this other application running in the background since they never suggested disabling it.
Either way, I'm happy to say that I am now able to successfully launch the Oracle Client installer without issue. I've also learned a little about getting the Oracle 11g Instant client to work with Toad while I worked through the issue with the installer. I could almost get by completely with just using the Instant Client if I didn't have to use SQL*Loader (sqlldr.exe) and tnsping.exe. Any suggestions for getting these two functions to work with the Instant Client would be appreciated. I tried copying the binaries and the message files into the appropriate instant client directories, but windows kept complaining about missing .dll's when I tried executing the commands.
If there is no workaround for getting these functions to work with the Instant Client, and I have to do an Oracle Client install, at least now I can. Do you know if I would need to do the full "Administrator" install to get these functions, or can I do just the "Run Time" install to get sqlldr and tnsping?
Thanks again for your help

Grid Control 11g R1 installation error OUI-10133

Hello All,
I'm installing Oracle Enterprise Manager 11g Release 1 on SUSE Linux 10 x86_64. Here I'm facing an error *"OUI-10133:Invalid staging area. There are no top level components for Linux available for Installation in this staging area."*. Installation packages were downloaded from http://www.oracle.com/technetwork/oem/grid-control/downloads/linuxx8664soft-085949.html. All three zip files are fully downloaded, verified and unzipped. Someone in internet said these zip files should be extracted in one directory. But I see some folders exist in all three unzipped folders are same but contain different files. If I put them in one directory they would be overwrote. What should I do? Please suggest. Thanks in advance.
Best Regards,
Guangming Duan

864397 wrote:
Hello All,
I'm installing Oracle Enterprise Manager 11g Release 1 on SUSE Linux 10 x86_64. Here I'm facing an error *"OUI-10133:Invalid staging area. There are no top level components for Linux available for Installation in this staging area."*. Installation packages were downloaded from http://www.oracle.com/technetwork/oem/grid-control/downloads/linuxx8664soft-085949.html. All three zip files are fully downloaded, verified and unzipped. Someone in internet said these zip files should be extracted in one directory. But I see some folders exist in all three unzipped folders are same but contain different files. If I put them in one directory they would be overwrote. What should I do? Please suggest. Thanks in advance.
Best Regards,
Guangming DuanHello Guangming,
You need to unzip all files into a same directory. Don't worry about folders. Unzip tool will extract the files into the correct folders (will not overwrite the content of the folder).
Regards
Gokhan

Error: OUI cannot be launched

Hi,
Try to install 9i patch, update 9i to 9.2.0.4 after installing 9i. Patch was copied from other server.
$cd /tech/oracle/Oracle_9i_Software/Patch/Disk1
$./runInstaller -ignoreSysPrereqs -invPtrLoc /var/opt/oracle/oraInst.loc
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.8 or 5.9. Actual 5.10
Failed <<<<
Ignoring required pre-requisite failures. Continuing...
Error: OUI cannot be launched because the current working directory is set on the CD-ROM mount point. Launching OUI from this directory will make it difficult to unmount the disk later in the installation. Please change the working directory and relaunch OUI.
what is wrong...?
Thanks
Jerry
Edited by: jerrygreat on Jul 24, 2009 11:00 AM

jerrygreat wrote:
Thanks
acturally , it is same
$/tech/oracle/Oracle_9i_Software/Patch/Disk1/runInstaller -ignoreSysPrereqs
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.8 or 5.9. Actual 5.10
Failed <<<<
Ignoring required pre-requisite failures. Continuing...
Error: OUI cannot be launched because the current working directory is set on the CD-ROM mount point. Launching OUI from this directory will make it difficult to unmount the disk later in the installation. Please change the working directory and relaunch OUI.
Regards,
Edited by: jerrygreat on Jul 24, 2009 11:22 AMOK, so you are using a full path spec to launch the copy of runInstaller located at /tech/oracle/Oracle_9i_Software/Patch/Disk1, but what is your "current working directory" at the time you execute this command? Show us:
$> pwd

ERROR: OUI files not found at their expected location. while cloning 11.5.9

Dear Friends,
Getting error when cloning 11.5.9 from PROD to DEV:
ERROR: OUI files not found at their expected location. Please make sure that the pre-requisit OUI patch was applied correctly: patch should be unzipped directly at the ORACLE_HOME root level so that
<iAS ORACLE_HOME>/oui21/oui/lib/OraInstaller.jar exists.
Restart adclone.pl after performing required corrections.
I applied the patch 5035661 also but still the error exists.
Please let me know the fix.
[appldev@betestoracle bin]$ perl adcfgclone.pl appsTier
First Creating a new context file for the cloned system.
The program is going to ask you for information about the new system:
Enter the values for the new APPL_TOP Context:
Does the target system have more than one application tier server node (y/n) [n] ?:
Is the target system APPL_TOP divided into multiple mount points (y/n) [n] ?:
Target system APPL_TOP mount point [apps/applprod/prodappl]:/apps/DEV/devappl
Target system COMMON_TOP directory [apps/applprod/prodcomn]:/apps/DEV/devcomn
Location of JDK 1.3.1 on the target system [usr/java/jdk1.3.1_10]:
The new context file has to contain port numbers related to target system.
Do you want to preserve the port values from the source system on the target system (y/n) [y] ?:n
Clone Context uses the same port pool mechanism as the Rapid Install
Once you choose a port pool, Clone Context will validate the port availability.
Enter the port pool number:[0-99]
50
Checking the port pool 50
done: Port Pool 50 is free
Web Listener port is 8050
Complete port information available at /apps/DEV/devappl/admin/out/PROD_betestoracle/portpool.lst
Backing up /apps/DEV/devappl/admin/PROD_betestoracle.xml to /apps/DEV/devappl/admin/PROD_betestoracle.xml7.bak
Creating the new APPL_TOP Context file from :
/apps/DEV/devappl/ad/11.5.0/admin/template/adxmlctx.tmp
The new APPL_TOP context file has been created :
/apps/DEV/devappl/admin/PROD_betestoracle.xml
Log file located at /tmp/CloneContext_05131045.log
Please enter the APPS password:
apps
Running Rapid Clone with command:
perl ./adclone.pl java=/apps/DEV/devcomn/util/jre/1.1.8 mode=apply stage=/apps/DEV/devcomn/clone component=appsTier method=CUSTOM appctxtg=/apps/DEV/devappl/admin/PROD_betestoracle.xml
ERROR: OUI files not found at their expected location. Please make sure that the pre-requisit OUI patch was applied correctly: patch should be unzipped directly at the ORACLE_HOME root level so that
<iAS ORACLE_HOME>/oui21/oui/lib/OraInstaller.jar exists.
Restart adclone.pl after performing required corrections.
Starting application Services for PROD:
Running:
/apps/DEV/devcomn/admin/scripts/PROD_betestoracle/adstrtal.sh APPS/<appspwd>
Regards,
DB

ERROR: OUI files not found at their expected location.Please see these docs.
Troubleshooting RapidClone issues with Oracle Applications R12 [ID 603104.1] -- adcfgclone.pl appsTier fails with "ERROR: OUI files not found at their expected location"
Preclone DBtier Fails: Error: Oui Files Not Found [ID 739589.1]
Troubleshooting Guide and Known Issues List for the Oracle Application Management Pack for Oracle E-Business Suite [ID 812294.1]
Application Management Pack for Oracle E-Business Suite Release 2.0.x Troubleshooting Guide [ID 412044.1]
Thanks,
Hussein

ERROR: OUI-10180:Invalid Operating System group name specified. em12c instl

Hi All,
I am doing a silent install of EM12C, I have downloaded the 2 zip files from e-delivery.
The installation is done as ora3010 user whose group id is ems3010. On the same machine I have installed 11.2.0.2 with the same ora user ora3010 and group ems3010 for EM repos.
Now when I try to do the silent install of EM12C with the command
<EM_DUMP>/runInstaller -silent -responseFile $CONFIG_HOME/software_only.rsp -invPtrLoc $HOME/Middleware/oraInst.loc -waitForCompletion
with the contents of "software_only.rsp" file like below
RESPONSEFILE_VERSION=2.2.1.0.0
UNIX_GROUP_NAME=ems3010
SECURITY_UPDATES_VIA_MYORACLESUPPORT=false
DECLINE_SECURITY_UPDATES=true
INSTALL_UPDATES_SELECTION="skip"
ORACLE_MIDDLEWARE_HOME_LOCATION=/slot/ems3010/oracle/Middleware
FROM_LOCATION="../oms/Disk1/stage/products.xml"
DEINSTALL_LIST={"oracle.sysman.top.oms","12.1.0.1.0"}
b_upgrade=false
EM_INSTALL_TYPE="NOSEED"
CONFIGURATION_TYPE="LATER"
TOPLEVEL_COMPONENT={"oracle.sysman.top.oms","12.1.0.1.0"}
I get this error
ERROR: OUI-10180:Invalid Operating System group name specified.
As you can see the UNIX_GROUP_NAME is set to proper group id ems3010
-bash-3.2$ id ora3010
uid=60103010(ora3010) gid=60403010(ems3010) groups=60403010(ems3010)
Please Help.

Thanks Asheoran.
However the issue was with my Ora Inventory file OraInst.loc. I had actually installed 11.2.0.2 database on the same machine and as same user, and for that db I had a different OraInst.loc file. When I give the same OraInst.loc file for the EM install too, the error goes away. It seems we just need to have one Inventory file for both installations.

Error OUI-25031 - default installation

All day Im trying to install Oracle 10g Release 2 (10.2) for Solaris 10 (x86).
Each time it finishes with error: OUI-25031.
Its going to be just a default installation. I did it many times ago but never had this problem.
The log file is telling nothing to me. It complains about Enterprise Manager Grid which I dont wont to install.
Does anyone know what is the problem with it ?

I have downloaded it on MAY previous year.
I believe the link is this, as the size of the file is exactly this same: http://www.oracle.com/technetwork/database/10202solx86soft-089512.html
Although I need to correct entry on my above post: file size on the UFS partition is: 681,090,961 bytes
The document I refer to is: database\doc\relnotes.102\b15696.pdf (inside of the 10202_database_solx86.zip)
Here is last 50 lines on installActions2011-01-08_09-56-02PM.log
# An error report file has been saved as hs_err_pid6915.log.
# Please refer to the file for further information.
Command = /oracle/product/10.2.0/db_2/jdk/jre//bin/java has failed
INFO: Configuration assistant "Oracle Net Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to /oracle/product/10.2.0/db_2
Configuration directory is set to /oracle/product/10.2.0/db_2/cfgtoollogs. All xml files under the directory will be processed
INFO: The "/oracle/product/10.2.0/db_2/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO: Created a new file /oracle/product/10.2.0/db_2/cfgtoollogs/configToolFailedCommands
INFO: Since the option is to overwrite the existing /oracle/product/10.2.0/db_2/cfgtoollogs/configToolFailedCommands file, backing it up
INFO: The backed up file name is /oracle/product/10.2.0/db_2/cfgtoollogs/configToolFailedCommands.bak
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: --------------------------------------
INFO: The "/oracle/product/10.2.0/db_2/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO: The "/oracle/product/10.2.0/db_2/cfgtoollogs/configToolAllCommands" script contains all commands to be executed by the configuration assistants. This file may be used to run the configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO: Since the option is to overwrite the existing /oracle/product/10.2.0/db_2/cfgtoollogs/configToolFailedCommands file, backing it up
INFO: The backed up file name is /oracle/product/10.2.0/db_2/cfgtoollogs/configToolFailedCommands.bak.1
SEVERE: OUI-25029:One or more "Recommended" configuration assistants have not completed successfully. Not successfully running any "Recommended" assistant means your system will not be correctly configured.
INFO: User Selected: Yes/OK
WARNING: Do you really want to exit?
INFO: User Selected: Yes/OK
INFO: The OUICA command is launched from /oracle/product/10.2.0/db_2/oui/bin/ouica.sh.
WARNING:
The following configuration scripts need to be executed as the "root" user.
#!/bin/sh
#Root script to run
/oracle/product/10.2.0/db_2/root.sh
To execute the configuration scripts:
    1. Open a terminal window
    2. Log in as "root"
    3. Run the scripts
    4. Return to this window and click "OK" to continue
*** Starting OUICA ***
Oracle Home set to /oracle/product/10.2.0/db_2
Configuration directory is set to /oracle/product/10.2.0/db_2/cfgtoollogs. All xml files under the directory will be processedEdited by: user639256 on Jan 9, 2011 4:06 AM
Edited by: user639256 on Jan 9, 2011 4:09 AM

TS1368 I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

Click here and follow the instructions.
(98897)

Problem with DMGs and error: "No Mountable File Systems"

Problem with DMGs and error: "No Mountable File Systems"
The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
Recent programs includes:
1) upgrading from Parallels 5.5 to 6.0 on both machines.
2) using an HP secure II usb drive and setting up a secure disk.
3) installing new itunes 10
4) new update to Flip For Mac.
The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
Message was edited by: remaia

Where you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it

I updated to iTunes 12 and didn't like it. Followed advice to revert to 11.1. Now my iphone won't sync and error message says I need iTunes 11.2 or higher. Apple Download choices didn't have anything between 11.1.5 and 12. What can I do?

I updated to iTunes 12 and didn't like it. Followed advice to revert to 11.1. Now my iPhone 5 won't sync and error message says I need iTunes 11.2 or higher. Apple Download choices didn't have anything between 11.1.5 and 12. What can I do? Using iTunes 12 is not an option. Many features I used for audiobooks have disappeared.

The version immediately prior to 12 was 11.4.0.18. Here are direct download links from Apple's servers:
iTunes 11.4.0.18 for Windows (32-bit) - iTunesSetup.exe (2014-09-09)
iTunes 11.4.0.18 for Windows (64-bit) - iTunes64Setup.exe (2014-09-09)
tt2

Every time I try to open my safari it restarts my computer, or if it does open it is for only about a minute before it gets and error and closes.What should I do?

Every time I try to open my safari it restarts my computer, or if it does open it is for only about a minute before it gets and error and closes.What should I do?

gets and error and closes.What should I do?
If Safari is crashing.. post a crash report so we can try and help...
If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Copy/paste the entire contents of the Crash Reporter window into your reply including the, "binary images" seection.
If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.

When I try to update my apps on my MacBook Pro, Ipad, and Ipod it wont allow me. On the computer it says theres and error. (11111) But on the Ipod and Ipad it starts to update and completely stops. What should I do?

When I try to update my apps on my MacBook Pro, Ipad, and Ipod it wont allow me. On the computer it says theres and error. (11111) But on the Ipod and Ipad it starts to update and completely stops. What should I do?

Maybe this.
Fix iPhone Apps Stuck "Waiting" During Installation
Try update the apps one at a time

HT1926 just lost my itunes after doing a update. getting error message MSVCR80.dll and ERROR 7 (Windows error 126)I even tried to reinstall the whole program off from here. What happened? HELP!

I tried to open my Itunes toady on my home computer. It said to update the library so I did. Now it wont open or anything. Tried reinstalling everything and get the error messages posted in the title above. Please Help. I have a lot tied into Itunes. Now when I check for updates it says everything is upt to date but when I try to open it i still get these two erroe messages. MSVCR80.dll and ERROR 7 (Windows error 126)

Hello berlinfire1979,
The following article provides further information regarding this error, and steps that can help get iTunes working again.
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/TS3074
Cheers,
Allen

Patchset 10.2.3.2 and Error OUI-10091

Similar Messages

Maybe you are looking for