Path for db2 library 'libdb2.so' could not be determined

Any ideal why i would get this error, working on upgrading a system, it was working, then SUM shut it down and now it won't restart.    i have tried lots of things and no luck.  R3trans works fine.
CLASSPATH=:/db2/db2lxd/sqllib/java/db2java.zip:/db2/db2lxd/sqllib/java/runtime.zip:.:/db2/db2lxd/sqllib/java/db2java.zip:/db2/db2lxd/sqllib/java/runtime.zip:.
LD_LIBRARY_PATH=/usr/sap/LXD/SYS/exe/run:/usr/sap/LXD/SYS/exe/uc/linuxppc64
dev_w0
..retrieving configuration parameters
C  ..done
C  *** ERROR => path for db2 library 'libdb2.so' could not be determined
[dbdb6.c      11762]
C  *** ERROR in getConfigurationAndEnvironmentHandle[/bas/741_REL/src/dbs/db6/dbdb6.c, 13610] CON = -1 (BEGIN)
C  &+     DbSlConnectDB6: Unable to load DB2 libraries. Connect failed.                            
C  &+                                                                                              
C  &+                                                                                              
C  *** ERROR in getConfigurationAndEnvironmentHandle[/bas/741_REL/src/dbs/db6/dbdb6.c, 13610] (END)
M  ***LOG R19=> ThDbConnect, db_connect ( DB-Connect 000256) [thDatabase.c 75]
M  in_ThErrHandle: 1
M  *** ERROR => ThInit: db_connect (step TH_INIT, thRc ERROR-DB-CONNECT_ERROR, action STOP_WP, level 1) [thxxhead.c   2280]
M

Hi David ,
Please check in Instance Kernel Directory /usr/sap/<SID>/<INSTANCE>/exe .
there should be db6_clidriver exists and where all lib files related to Db2 exists. if not then copy in from global/db6/<LINUX> .and try .
Thanks
Manas Behra

Similar Messages

  • Alchemy for xfi - the product state could not be determined (error 6

    as the title states I have xfi platinum & installed alchemy for xfi, tried to start it & I get "the product state could not be determined (error 60)" I click any of the links & it takes me to the buy page for the audigy alchemy. I've tried uninstalling & reinstalling multiple times, also uninstalled & reinstalled my xfi drivers. No change. I can enter anything into the entry field on the activation page & It'll advance me to the next page, then when it goes to connect to creative to register. I get another error. "an error occurred while attempting to connect to the internet. (00000)" I dont have anything blocked regarding this program & have tried with my firewall disabled. Please. Help

    Well I didnt follow the link, but a kind person did download an update for Windows for me, if i can find link i will post it is from USA, took over 2 hours to install/update but appears to fix this problem, i now have all the bits that windows left out back on pc, so there is a solution out there, i know the site it came from there had been 80,000 downloads in over 2 days.

  • Customer/vendor could not be determined for IDOC

    Hi all,
    Am trying to post incoming payments through EDI ..
    IDOC Information
    IDOC type: PEXR2002
    Message type: REMADV
    Function Module: IDOC_INPUT_REMADV
    Process code: REMA
    Am getting these 2 errors :
    Customer/vendor could not be determined for intermediate document
    Company code could not be determined for intermediate document
    Has anyone encountered this problem, if yes can anyone suggest the solutions, any help regarding this is highly appreciated.
    Thanks.

    Hi,
    Currently I am facing with the same type error when trying to post incoming payments through EDI.
    IDOC Information
    IDOC type: PEXR2002
    Message type: REMADV
    Function Module: IDOC_INPUT_REMADV
    Process code: REMA
    I am getting the below error:
    1. Company code could not be determined for intermediate document
    I have maintained record records for partner type and partner number in OBCA.
    Please advice what are the other configuration changes do I need to maintain.
    Your assistance would be highly appreciated.
    Thanks.
    Edited by: Victor Collins on Feb 27, 2009 9:31 PM

  • Exchange rate of USD in INR for date could not be determined

    Hi
    I have a problem while creating a RE Sales order.
    Error is :
    Exchange rate of USD in INR for date 21.07.2006 could not be determined
    Help will be appreciated.
    Regards,

    Hi,
    Pls check the following things:
    In the customer master >sales area data> sales tab page, check what is the exchange rate type maintained. Default is "M".
    Now, go to SPRO>General Settings>Currencies>Enter exchange rates and under this node, check the value for USD to INR for the Echange rate type maintained in the customer master.
    For the date mentioned, the exchange rate might be missing here.
    Hope, this helps!
    Thanks,
    Siva

  • IDoc type could not be determined for the IDoc

    I am trying to Post the payment run through the transaction F110.
    In the payment run log i get the following message:
    "IDoc type could not be determined for the IDoc"
    But in fact the IDoc is generated and it is displayed in We05.
    I have configured the Message type PAYEXT-PEXR2002 and EUPEXR-IDCREF01 both for the partner.
    Has anybody Idea about why this error is coming and how i can resolve this?
    This is important because in Payment run log, they need to know the IDoc number generated for that run, else it may become difficult for user to identify which IDoc was created for a particular payment run.
    Would appreciate if anyone can please help on the same.
    Thanks & Regards,
    Narayanan

    Hi,
    If you are paying the payment through F110, if the payment exceeds the limit what you are spefied in available amounts in FI12 screen. First Please check this screen.
    still if you are having any problem
    Check in the below path:
    IMG- Financial Accounting (New) - Accounts Receivable and Accounts Payable - Business Transactions - Release for Payment - 1. Create Workflow Variant for Release for Payment
    2. Assign Release Approval Procedure for Release for Payment
    3. Define Users with Authorization to Payment Release
    Thanks
    Chandra

  • Error while J1INCHLN - Business Place for document  could not be determined

    Dear All Experts,
    I am getting below error while running J1INCHLN Business Place for document could not be determined. For updating Business Place & Section Code I am running J1INPP Update Business Place information in FI document.
    So I am getting error Document is incomplete.
    Further I decided to update this in BSEG manually from SE16N. I am getting two errors :
    1 ) Entry XX does not exist in T059Q ( Check Entry)
    2 ) Entry C1 does not exist in T059Q ( Check Entry)
    I have posted TDS to with these Tax Codes and same maintained in Vendor Master as well. But I am not getting these entries IN T059Q.
    I got way to maintain via View Maintainence. But I would like to know the significance of these details.
    Experts guidance will be helpful.
    Regards,
    Revati Joshi.

    Dear Expert,
    You might have not maintained a number range intervals for Remittance Challan for current year,
    Step-1:
    It is in Path: F.A(New) -- F.A.G.S(New) -- Withholding Tax --- Extended Withholding Tax --- Posting --- India --- Remittance Challans --- Maintain Number Groups -- Provide your company code, Section Code, Official W/H Tax Key and Number Group - 001
    Step-2:
    It is in Path: F.A(New) -- F.A.G.S(New) -- Withholding Tax --- Extended Withholding Tax --- Posting --- India --- Remittance Challans --- Assign Number Ranges to Number Groups --- Provide Number Group - 001 and Internal Number Range - 01
    Step-3:
    It is in Path: F.A(New) -- F.A.G.S(New) -- Withholding Tax --- Extended Withholding Tax --- Posting --- India --- Remittance Challans ---Maintain Number Ranges --- Select Maintain Groups button and select the 001 Check box and menu -- interval -- maintain and provide company code, and then select insert interval button and provide Calendar Year and Intervals
    after configuring this steps, try posting the documents by entering business place and section code in the accounting document and Create Remittance Challan in T-Code: J1INCHLC - Create Remittance Challan  and next for Bank Challan T-Code: J1INBANK - Enter Bank Challan and next for printing Withholding Tax Certificate T-Code: J1INCCERT - Print 
    Try this steps.. it will met your requirement..
    Regards,
    GOPI KRISHNA YANDRA
    SAP FI/CO CONSULTANT

  • Artwork for ..... could not be found. An unknown error occurred (-609).

    I've installed both 7.5 and 7.6 and with either version for some reason I can no longer get the album artwork to any of my albums, when trying to get them the following message appears: Artwork for ..... could not be found. An unknown error occurred (-609). Any help how I can get the album artwork for my albums would be very much appreciated.

    aley175 wrote:
    When all my songs were transfered to iTunes half of my songs have '!' to the left of them in a black circle. Is there anyway to delete them all at once or do I have to go through every second song and hit delete?
    Try iTLU - iTunes Library Updater which if set up properly can remove all missing tracks from the library and add all new unlisted tracks from your media folders into the library. Running time seems to grow expoentially with the size of the libray - 34,000 drags, but 5,000 shouldn't be too bad.
    tt2

  • Every time I try to export my movie from iMovie, I keep getting a message that states, "Unable to prepare project for publication. The project could not be prepared for publication because an error occurred. (-50). HELP

    Every time I try to export my movie from iMovie, I keep getting a message that states, "Unable to prepare project for publication. The project could not be prepared for publication because an error occurred. (-50). HELP

    Hi
    Error -50 paramErr  Error in user parameter list
    Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
    UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
    What this means in Your situation is above me.
    • free space on internal boot hard disk? How much ?
    Video codec
    • streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
    Pictures
    • in what format ? .jpg, .bmp, .tif, else ?
    Audio
    • from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
    Trash the Preference file:
    The "com.apple.iMovie.plist" file
    Many users has not observed that there are TWO libraries.
    • Library - at root level
    • Library - in user/account folder - THIS IS THE ONE to look into
    from Luke Burns
    I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
    I don't know why that could cause that big of a problem, but it did..
    Klaus1
    You need more free space on your hard drive.
    jonorparkerjon
    After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
    Where do Your material come from
    • Camera
    • External hard disk
    • USB-memory
    And all are connected so that iMovie can find it ?
    from: jonorparkerjon
    After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
    from Karsten S
    Shorter clips than 1,5 sec might be one of the culptrits
    Bengt cont.
    Set-Up might differ
    • Mac OS - most probably X.7 or more
    • iMovie version - more than iM'11 v. 9.0.4
    Action taken
    • Finalizing project - I never do as I never understood the gain to do so
    • Share as HD to iDVD - never give any gain but if it works the resulting DVD is less quality than if SD-quality was shared
    fps - set
    •I only use PAL (25fps)
    Yours Bengt W

  • Issue after installing Designer 10.1.2 on Windows7 - ???-21705: The .msb message file for product "Unknown", utility "CDR" could not be found

    Hi,
    I installed Oracle Designer 10.1.2 on my laptop which is running Windows7. I followed the recommendations to make run the setup.exe file (compatibility SP2 & Run as administrator) but while the installation I got the error message twice or 3 times: "The procedure entry point GetProcessImageFileNameW could not be located in the dynamic library PSAPI.DLL". I skipped this message and the installation ended with success anyway. Starting the first Designer windows works well. Though when I click on the des2k61.exe file and once I entered the correct Repository Owner/password and connect string I got the message:
    ???-21705: The .msb message file for product "Unknown", utility "CDR" could not be found.
    For information I used to have Designer 10.1.2 on my former laptop (also Windows 7) and it works well. I migrated my DB (11.2.0.2) to the new PC which includes the repository owner I'm trying to use.
    Any idea about the possible origin of the issue?
    Thanks in advance for your help.
    Kind regards,
    Yves

    Hi,
    I installed Oracle Designer 10.1.2 on my laptop which is running Windows7. I followed the recommendations to make run the setup.exe file (compatibility SP2 & Run as administrator) but while the installation I got the error message twice or 3 times: "The procedure entry point GetProcessImageFileNameW could not be located in the dynamic library PSAPI.DLL". I skipped this message and the installation ended with success anyway. Starting the first Designer windows works well. Though when I click on the des2k61.exe file and once I entered the correct Repository Owner/password and connect string I got the message:
    ???-21705: The .msb message file for product "Unknown", utility "CDR" could not be found.
    For information I used to have Designer 10.1.2 on my former laptop (also Windows 7) and it works well. I migrated my DB (11.2.0.2) to the new PC which includes the repository owner I'm trying to use.
    Any idea about the possible origin of the issue?
    Thanks in advance for your help.
    Kind regards,
    Yves

  • Adobe Flex 4 Plug-in for HP Quick Test Pro could not find  any Flex environment fields (TEAFlex*.xml

    Hello all,
    When compiling Flex project with QTP automation libraries included (Flash Builder version is 4.5. QTP is 11, Adobe Flex 4.5 Plugin for HP QuickTest Pro is installed) the message as below pops up
    Adobe Flex 4 Plug-in for HP Quick Test Pro
    Adobe Flex 4 Plug-in for HP Quick Test Pro could not find
    any Flex environment fields (TEAFlex*.xml).
    OK
    After accepting it there is Flex application shown in IE8.
    Trying to record actions in the application gives no effect while TEAPluginIE.dll and TEAPluginQTP.dll are loaded during that.
    What could it be providing that TEAFlex.xml is in the directory where the TEA* dlls reside?
    Have a nice day!

    Adobe's official exam guide outlines exactly what you need to know:
    http://www.adobe.com/devnet/flex/pdfs/ace_exam_guide_flex4.pdf
    I took the Flex 3 ACE recently and found that the guide represents the exam content very well. It looks like there aren't a whole lot of changes in the Flex 4 ACE guidelines.
    To answer your questions:
    LCDS is not on the exam.
    What they expect you to know about the AIR library is very basic. It amounts to simple operation of an AIR app, file system operations, customizing the native window, drag-and-drop, and security. I've never developed an AIR app and got by just fine.
    Before taking the exam, I was already quite comfortable with much of Flex. Along the way I learned a few things that I haven't had a reason to touch. I found the exam to be quite easy, but I'm also a computer science guy and has also just experience Java certification which is much more difficult.
    I breezed through the Training From The Source book and was happy with it. However, you will do just as well with the LiveDocs for free.

  • I get the following message on certain songs in my library: the song could not be used because the original file could not be found

    I get the following message on several songs in my library:  the song could not be used because the original file could not be found.  How can I download these songs to my new iPod?

    This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • Getting an error "Customer could not be determined" for IDOCs in SCM 7.0

    Hi Friends,
        I am executing the report RSMIPROACT in ECC 6.0 system to publish Demand and Stocks into the SCM 7.0 system.
    The IDOC is processed without any errors in ECC 6.0 . However, in the SCM 7.0 system , the IDOC fails with the error.
    I have noticed that 2 things .
    1.  E1ADRE1 field is NOT being sent by the ECC system .
    2. I get the same error even if I manually add this field and add value 300 or 301 for the qualifier field.
    Has anybody faced this problem before ?
    I look forward to replies.
    Detailed error is given below.
    Regards,
    Ranjini.
    Customer could not be determined
    Message no. /SAPAPO/EDI010
    Diagnosis
    The system must determine the customer number from the IDoc data in order to update stock and sales figures for customers. It uses the additional section E1ADRE1 with the qualifier '300' or '301' in the vendor address section to do this. The customer number stored here should have a valid customer number in the APO System.
    The section was not available in the processed IDoc.
    System Response
    The system cancels processing.
    Procedure
    Configure the EDI convertor in such a way that the corresponding section has a value.

    Hi Ranjini,
    Please look into the following
    1) Customer master data is fully maintained
    2) Customer number ranges are fully defined in customisation
    3) Customer address details are maintained
    4) Is there any special characters used while defining customer data or customer
    number like $, #,[ etc.,?
    5) Customer int models are active in SCM side prior to IDOC processing (including
    customer, demand, stocks etc)
    Please confirm your findings
    Regards
    R. Senthil Mareeswaran.

  • Error "codepage could not be determined for the receiver-system"

    Hi,
    we use the idoc-adapter to send message from mySAP ERP to PI.
    All worked fine.
    So, this morning I have changed the datatype of the messageId from "char" to "int" in mySAP ERP in the customizing menue (install param). So, no message received in SAP PI.
    When I start transction "we05" in mySAPERP" I get the following error:
    "codepage could not be determined for the receiver-system" status 02.
    I have changed the datatyp to "char" but the same probleme
    Can anybody help me please?
    Regards
    Stefan

    This error shouldn't occur unless there is some modification at the OS level codepages.
    Please check the entried in the RFC destination for connecting to the XI system. Unicode settings.
    Regards,
    Prateek

  • I am trying to install iTunes on my PC, but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." Help!

    I am trying to install iTunes on my PC (using Windows 8.1), but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." The iTunes file (64-bit) I am trying to install, is named "iTunes64Setup.exe". What seems to be the problem? Help!

    Hey madnest,
    Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    Issues installing iTunes or QuickTime for Windows
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • I get the errer message "There is a problem with this windows installer package. A program required for this install to complete could not be run."

    I have Wondows Vista... I tried to upgrade to Itunes 10.5, and received an error orginially stating that I was trying to install a version older than the one I had.  I uninstalled all of itunes, and now I'm getting the error  message "there is a problem with this windows installer package.  Aprogram required for this install to complete could not be run.
    Help!  I have an IPhone, and I would like to get my Itunes upgraded so I can download the new Iphone software...
    Thanks!

    I have been in touch with Apple support in reference to my problem. We went through every solution available, and found no fix. The tech then suggested I contact Microsoft concerning this issue. I thought that suggestion was just to get me pointed somewhere but Apple. Boy was I wrong!! I contacted Microsoft, and was directed to a free download called Microsoft Fix. This program fixed something in the regisitor, and wala everything was fixed!! I now have I-Cloud and I-Tunes loaded and working well. So, if you can't install Apple Software and are running Window 7 you might give Microsoft Fix a try, it fixed my problem.....

Maybe you are looking for

  • The Heartbreak of Free Run (on tape)

    The good think about jam sync/free run is that it's easy to sync up multiple cameras. The bad thing (if it's on tape) a nightmare to log. The "digitize across timecode breaks" had never worked on our Avids. So it took me a while to try that same sett

  • File structure in Sun ONE (aka jForte)

    Hi: I have (and want to use) the following sources file-strcutrue: src/applet.java index.htlm applet.class But ONE (AFAIK) just allows to work this way (compiling the .class files in the same directory): index.html applet.java applet.class Does anybo

  • Is't possible to partionate the time capsule  ?

    i'd like to split the time capsule, so my wife and i can use it for time machine. We have one computer each

  • Playing HBO GO from iPad 2 on TV

    I had hoped to be able to tether my iPad 2 to a TV via the Digital AV Adapter that has the HDMI adapter and watch HBO GO.  But it appears that the app blocks my ability to do this (other apps like You Tube and Crackle work).  Is there any other way t

  • I get an error message 7-Zip file not found

    When I am trying to download Mozzila I keep getting an error message that states 7-Zip file not found and it won't let me download the browser.