Path of NWDI applications in Operating system

Hi,
Please tell me the path of NWDI applications(CMS,CBS,DTR) in our operating system.
Where they are stored.
Thanks a lot

Hi srini,
Please have a look at below link may it will help you understand about CBS,CMS,DTR and SLD.
http://help.sap.com/saphelp_nw04/helpdata/en/e1/b5443e02a9ab4186a6e1240a9a2455/frameset.htm.
Thanks,
Krishna

Similar Messages

  • Launching AIR application When Operating system starts

    Hi
    I want to lauch my AIR application automatically when windows operating system starts. How can i solve this problem.
    Thanks in advance to all
    Regards
    sss

    I found some information about this here:
    http://www.adobe.com/devnet/air/flex/quickstart/startup_options.html

  • Unable to install applications or operating system

    Ive just had a new hard drive installed as my previous one crashed after only 3 and haly years and I hadt backed up any of my data, so all now lost. Lesson learnt
    I have tried to load up the new mavericks operating system but it just crashes the system so I have given up on it.
    I am now trying to install microsoft office for MAC 2011 from disk and I just get a error telling me that installation has failed. I have tried reinstalling but still no joy.
    This disk has worked perfectly in the passed. Could it be the new hard drive is faulty as I seem to have problems installing any applications at the moment. Hard drive was only fitted last week.

    Hi Tom,
    kindly check the System requirements | Acrobat family of products—older versions (XI, X, 9)
    For serial number message try: 
    Error "Invalid serial number" | Acrobat 9 | CS4
    Thanks,
    Atul Saini

  • Does setup assistant overwrite applications and operating system?

    I want to give my wife my old laptop and transfer her data over. I want her to have my applications. Will the setup assistant overwrite my applications and remove them if she doesn't have them on her mac? Will it overwrite my version of OS with hers?
    Thanks

    Paranoia is understandable; however, misplaced. Just follow the steps in Pondini's Setup New Mac guide.

  • How do I partition my hard drive on the MacBook for 2 operating systems?

    I am looking to partition the hard drive on my MacBook, so that I can use Leopard on half, and Windows on the other half. However,I don't know how to do this?
    I personally would like it to be all Mac, but as my work applications and operating system is windows, I need to be able to do my work in windows...Help!
    Also, I am looking to buy a new internal hard drive for my MacBook, somewhere between 250 GB and 500 GB. I wonder where I could get a good quality, and affordable MacBook hard drive from? It must be an internal hard drive, and must be a good quality product that doesn't hurt my machine.
    All help and thoughts are appreciated!
    Regards

    [HERE'S|http://eshop.macsales.com/Search/Search.cfm?Ne=5000&Ntt=2.5harddrive&Ntk=Primary&Ns=P_Price%7c0&N=6892] a site that I like for finding HD's and memory.
    As far as windows goes, you need to decide how you're going to run it on your machine. Duo-boot like BootCamp or virtualization like Parallels Desktop or VMWare Fusion. Once determined, they each have their methods for allocation of disk drive space for windows. BootCamp works you through partitioning your drive while Parallels and VMWare sets up a virtual drive in the size you determine.
    From experience, you will need less space for windows than you think. I made a 30GB virtual drive for xp and ended up cutting it back to about 8GB.
    -GDF

  • SCCM 2012 use PowerShell to create a GlobalCondition, limiting the Deployment Type of an Application to certain operating systems.

    Title says it all basically.
    In the GUI im able to create a Global Condition (condition type: Expression) where I can add a clause that Limits the deployment type of an application to certain operating Systems (useful for deploying 64-bit apps).
    Is there away to Trigger that Setting using PowerShell? So far I haven't found one.
    Thx in advance...

    I changed my script a little bit and can be found Here. 
    An example to use it is:
    #Get Application named "Test" from the Server "localhost"           
    $app = Get-SCCMApplication "Test" "localhost"
    #A rule will be created from the global condition rule "ForumTest" where the registry value equals to "1"
    $rule1 = Create-SCCMGlobalConditionsRule . "ForumTest" "IsEquals" 1 "Registry"
    #Add the rule to the requirement rule of the deployment type
    $app.DeploymentTypes[0].Requirements.Add($rule1)
    #And save the application
    Save-SCCMApplication $app
    PowerShell, System Center 2012, Windows 8 http://blog.lechar.nl
    Thanks Rob!
    Have unfortunately encountered some problems:
    Get-SCCMApplication does not exist. Changed it to Get-CMApplication
    Create-SCCMGlobalConditionsRule - Cant find any "Create..." cmdlets
    Save-SCCMApplication does not exist
    Get-CMApplication : A positional parameter cannot be found that accepts argument 'TestApp'.
    At H:\sctipt\SetRequirement.ps1:2 char:9
    +  $app = Get-CMApplication "TestApp" "siteServe ...
    +         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : InvalidArgument: (:) [Get-CMApplication], ParameterBindingException
        + FullyQualifiedErrorId : PositionalParameterNotFound,Microsoft.ConfigurationManagement.Cmdlets.AppMan.Commands.GetApplicationCommand
    Create-CMGlobalConditionsRule : The term 'Create-CMGlobalConditionsRule' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
    the spelling of the name, or if a path was included, verify that the path is correct and try again.
    At H:\script\SetRequirement.ps1:5 char:11
    +  $rule1 = Create-CMGlobalConditionsRule . "GlobalRuleName" "IsEquals" 1 "Registry"
    +           ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : ObjectNotFound: (Create-CMGlobalConditionsRule:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    Cannot index into a null array.
    At H:\script\SetRequirement.ps1:8 char:2
    +  $app.DeploymentTypes[0].Requirements.Add($rule1)
    +  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : InvalidOperation: (:) [], RuntimeException
        + FullyQualifiedErrorId : NullArray
    Save-CMApplication : The term 'Save-CMApplication' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the na
    me, or if a path was included, verify that the path is correct and try again.
    At H:\script\SetRequirement.ps1:12 char:1
    + Save-CMApplication $app
    + ~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : ObjectNotFound: (Save-CMApplication:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException

  • How to retrieve the path on the operating system for basepath?

    Hi,
    how can I retrieve the path on the operating system of a basepath
    of an application?
    (I am implementing a java concurrent program that will extract data from the
    db and then create a file on the os, I would like to put this file in an out-directory under the top of the application)
    Thanks
    Henrik Brokvist

    Why not use PL/SQL, utl_file and a database directory?
    Gareth

  • Since upgrading to FaceTime 1.0.5 (170) I am no longer able to open the application on my MacBook Pro. I am using operation system OSX 10.6.8 and being presented with error message "You have been disconnected  - an internal error occurred.

    No longer able to open the application on my MacBook Pro since upgrading to FaceTime 1.0.5 (170). The operating system is OSX 10.6.8. 

    My problem opening FaceTime after the upgrade is now solved. I didn't pay enough attention when prompted to decide where to store the application upgrade and as a consequence the computer created another "Applications" folder within the existing one. When I subsequently clicked on the icon on the dock to open the application the computer couldn't find the software.
    Makerfield2

  • I just installed the Lion operating system, basically to upgrade my iPhone. I didn't realize that my Microsoft Office 2004 application would no longer work. I have been using Word for my writing and I receive most of my emails with Word attachments. I hav

    I just installed the Lion operating system, basically to upgrade my iPhone. I didn't realize that my Microsoft Office 2004 application would no longer work. I have been using Word for my writing and I receive most of my emails with Word attachments. I have been using Apple products for years, always touting their reliability and customer service. I am not a techie, I just want to be able to do what I do on the computer and Apple always fulfilled my needs. Now I am told because of some operating system gobbledygook, I have to go out and purchase new software to use Word. This is despicable. I see no particular benefit to using Lion, but I do see a lot of detriments. Apple now seems to have turned into Microsoft, making software obsolete so they can make more money and to **** with the customer. You can be sure that my next computer will be a PC. I have completely lost confidence in Apple.

    I seem to never tire of saying this. It was for Apple when they first announced 10.7 to disclose this. Yes, it was widely reported -- or rather, rumored -- but not by Apple. And many people who have gotten caught by this assumed that Apple itself would have told them beforehand about the loss of this very important feature which they had come to rely on. As far as I know, not even in fine print, does this appear anywhere on the Lion announcement or any of its links.
    I am not saying Apple had to continue Rosetta in Lion, or forever, just that if it was going to be dropped, it should have been made known.
    As relative "insiders" we should not forget that many people don't have the time, habit or interest to do this kind of research. I think it is a breach of trust that Apple has never directly made this announcement or given people the opportunity to decide beforehand if giving up their PPC apps for a new OS is a worthwhile tradeoff.

  • Office 2013 ODT The operating system is not presently configured to run this application

    hi!
    We have RDS 2012 R2 setup up and running with session host, connection broker, rd gateway and rd web. AS office 2013 can be deployed using APP-V 5 SP2, we have created .appv pkg using ODT as mentioned in this
    guide . It was working fine for 2 days and then suddenly we started to get error popup window saying
    "The operating system is not presently configured to run this application" . We are receiving this error on Session host server(win 2k12 r2) which is App-V 5 sp2 client, when we try to open any office 2013 app.
    And If check on App-v server which is also a publishing server. In event viewer i see this log entry.
    Log Name:      Microsoft-AppV-Server-Publishing/Admin
    Source:        Microsoft-AppV-Server-Publishing
    Event ID:      215
    Level:         Error
    Description:
    The request URL doesn't contain the query string for the client OS.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-AppV-Server-Publishing" Guid="{825C7963-9E32-4E3B-B74A-DF2CC3B6822B}" />
        <Execution ProcessID="3092" ThreadID="5176" />
        <Channel>Microsoft-AppV-Server-Publishing/Admin</Channel>
     </Event>
    SaM

    We have the same issue. All other applications seem to work fine.
    App-V 5.0 SP1 with hotfix package 2 installed on the App-V Management/Publishing server. We only use Windows Server 2012 RDS instead of R2. On the RDS servers, App-V 5.0 SP2 is installed. We use User Profile Disks and also used the ODT for Office
    2013.
    I our case it worked for a few hours. We didn't change anything (no updates of other things) other than having a few users try to login with different accounts to test the application. Reinstalling the client doesn't work and we also tried to removed
    all AppVClientPackages and then clear the cache from locations like:
    %LOCALAPPDATA%\Microsoft\AppV\Client\VFS
    %APPDATA%\Microsoft\AppV\Client\VFS
    C:\ProgramData\App-V
    I'll post a solution if I find one.

  • BackupVirtualDeviceFile::RequestDurableMedia: Flush failure on backup device 'CA_BAB_MSSQL_e85860_10001_2085d987_ERP_DATABASE_ST_1'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application reque

    hello,
    i getting the following error message in event id while backing up my SQL db by third party backing tool
    BackupVirtualDeviceFile::RequestDurableMedia: Flush failure on backup device 'CA_BAB_MSSQL_e85860_10001_2085d987_ERP_DATABASE_ST_1'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application request.).
      <Data>995(The I/O operation has been aborted because of either a thread exit or an application request.)
    please suggest the solution.

    Hi pulkit,
    According to your description, the actual error could be caused by but not limited to the following issues: Memory issues, Third Party issues, or SQL Server issues and so on. However, as shanky post, if you use an external or third party backup tool like
    NetBackup, BackupExec, or one of the many other tools available for backing up SQL Server databases without having to write your own backup scripts, and the error occurs. You need to check if there are some issues about your VDI or SQLVDI.DLL. Meanwhile,
    you also need to troubleshooting Memory Issue or the third tool issue. For more information about troubleshooting the error 995 when backing up database via the third party tool. You can review the following blog.
    https://support.software.dell.com/kb/SOL14674
    In addition, the error may include additional text from the operating system indicating that the disk is full. When performing a backup or restore operation with third-party backup software an additional message may occur indicating that the backup failed.
    Perform the following tasks as appropriate:
     1. Review the underlying system error messages and SQL Server error messages preceding this one to identify the cause of the failure.
     2. Ensure that the backup and restore medium has sufficient space.
     3. Correct any errors raised by third-party backup and restore software.
    There is also detail about backing up database via T-SQL statement /GUI, you can review the following article.
    http://technet.microsoft.com/en-us/library/ms187510.aspx
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • I have Adobe Acrobat 9 Standard on both of my computers.  Some time ago, one crashed my computer and I had to reinstall the operating system and all applications.  After I had installed once Acrobat 9 Sdt in the computer, I wanted to update the software v

    I have Adobe Acrobat 9 Standard on both of my computers.
    Some time ago, one crashed my computer and I had to reinstall the operating system and all applications.
    After I had installed once Acrobat 9 Sdt in the computer, I wanted to update the software version 9.0.0 update to the same level as it was before the crash and that the other computer has version named 9.5.5.
    The system for update from version 9.0.0 does not work at all. "There are no updates" listed in the dialog.
    Can you advise how I get my Adobo Acrobat 9 Standard (Version 9.0.0) could be updated to the same level as the computer had before the crash.

    ftp://ftp.adobe.com/pub/adobe/acrobat/win/9.x/

  • The Creative Cloud application becomes inoperable continually on both my Windows 7 and 8.1 operating systems. I'm tired of re installing the application after deleting the OOBE file to get updates and syn settings between computers for Photoshop. Is this

    The Creative Cloud application becomes inoperable continually on both my Windows 7 and 8.1 operating systems. I'm tired of re installing the application after deleting the OOBE file to get updates and syn settings between computers for Photoshop. Is this an endemic problem with others? I'm using Google Chrome as my browser. Is this an issue with the problem?

    Similar problem just happened to me with the Creative Cloud Update 1.7.1.418—slightly different so I thought I'd share. I have multiple Adobe Creative Cloud programs installed on my computer, all working just fine. I updated the Cloud App to the latest version and then it shows me that I have only one program installed! All my previously installed programs (Photoshop and the like) still work but show as "install" instead of "Up to date". Initially I thought I'd have to re-install the Cloud app or recreate the OPM data base but then I noticed that some of the Cloud app preferences (Apps > Settings > App Language) were different to what I had set previously. I use English (International) language, the update had reverted the app back to English (North American). I flicked back to my previous language and bam, all my apps now show as being installed correctly.

  • SCCM 2012 - Adding Operating System Installer (The specified path does not contain a valid operating system ..)

    I have encountered the dreaded "The specified path does not contain a valid operating system or you do not have permission to access it.  Specify a valid path" message that seems to be popular in many forums .... BUT, so far none of the "solutions"
    have fixed the problem (of I don't understand the fix)
    Configuration
    SCCM 2012 SP1 5.0.7804.1000
    WADK 8.100.26629.0  < Suggested Fix
    Server 2008 R2
    SCCM Administrator with UserID = SCCMAdmin 
    Steps / Fixes I have followed
    I have configured a administrative share
    \\caleb\sources$ to hold directories (such as Apps, Drivers, and OS) with the following NTFS Permissions
    EVERYONE has Read and Execute, List folder, Read permissions<o:p></o:p>
    SYSTEM has Full Control 
    <Suggested Fix
    SCCMManagers (our group that has all SCCMManagers) has Full Control<o:p></o:p>
    SCCMAdmin (the SCCM Admin account that we are using to import image) has Full Control<o:p></o:p>
    Local Administrators (the local machine administrator) has Full Control 
    <Suggested Fix
    <o:p></o:p>
    Another Fix is to explicitly grant all permissions to the SCCM Administrator
    <Suggested Fix
    >Administrative Users ...
    Properties of the SCCM Administrator (for us that is SCCMAdmin) has all the boxes checked<o:p></o:p>
    Another suggestion I was able to glean was to Specify the Network Access Account
    so I configured SCCMAdmin as the Network Access Account.
    Another potential fix is that the image ISO file that has been downloaded is corrupt.   So, I downloaded the Win 7 (and Win 8.1) ISO's from MSDN and did a Checksum check.
    I then mounted the ISO (on 2008R2 I use VirtualClone Drive) and copied the contents of the image to
    E:\Sources\OS\en_windows_7_professional_with_sp1_vl_build_x86_dvd_u_677896 for Windows 7 with SP1
    To double check,
    I computed the Hash on the Install.WIM located in the Sources directory and compared with
    the computed Has Tag for the Install.WIM on the ISO Image  ... and the Hash tag of the WIM's matched (extracted vs what is contained within the ISO)<o:p></o:p>
    I tried to load the images into SCCM 2012 using the "Operating System Installers" option
    UNC to installer
    \\caleb\sources$\OS\en_windows_7_professional_with_sp1_vl_build_x86_dvd_u_677896
    Then I receive the lovely message <o:p></o:p>
    "The specified path does not contain a valid operating system or you do not have permission to access it.  Specify a valid path"<o:p></o:p>
    <o:p> </o:p>
    From
    C:\Program Files (x86)\Microsoft Configuration
    Manager\AdminConsole\AdminUILog\SmsAdminUI.log<o:p></o:p>
    <o:p> </o:p>
    \r\nSystem.Management.ManagementException\r\nGeneric failure \r\n  
    at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus
    errorCode)
       at System.Management.ManagementObject.InvokeMethod(String
    methodName, ManagementBaseObject inParameters, InvokeMethodOptions options)
       at
    Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.ExecuteMethod(String
    methodClass, String methodName, Dictionary`2 methodParameters, Boolean
    traceParameters)\r\nManagementException details:
    instance of SMS_ExtendedStatus
     Description = "Failed to get the image property from the source WIM
    file due to error 80070002";
     ErrorCode = 2147942402;
     File ="e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\sspimagepackage.cpp";
     Line = 586;
     Operation = "ExecMethod";
     ParameterInfo = "SMS_OperatingSystemInstallPackage";
     ProviderName = "WinMgmt";
     StatusCode = 2147749889;
    \r\n<o:p></o:p>
    What am I missing ????  I assume something simple but, darn I'm stumped!!!

    Hi,
    Configuration Manager version
    Windows AIK or Windows ADK Version
    Windows PE versions for boot images customizable from the Configuration Manager console
    Supported Windows PE versions for boot images not customizable from the Configuration Manager console
    System Center 2012 Configuration Manager with no service pack
    Windows AIK for Windows 7
    Windows PE 3
    None
    System Center 2012 Configuration Manager with SP1
    Windows ADK for Windows 8
    Windows PE 4
    None
    System Center 2012 Configuration Manager with SP1 and cumulative update 2
    Windows ADK for Windows 8
    Windows PE 4
    Windows PE 3.11
    System Center 2012 Configuration Manager with SP1 and cumulative update 3
    Windows ADK for Windows 8
    Windows PE 4
    Windows PE 3.11 and Windows PE 5
    System Center 2012 R2 Configuration Manager
    Windows ADK for Windows 8.1
    Windows PE 5
    Windows PE 3.11
    Please try to install the Windows ADK for Windows 8.
    http://www.microsoft.com/en-us/download/details.aspx?id=30652
    For more information, please review the link below:
    http://technet.microsoft.com/en-us/library/gg682187.aspx
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • I reinstalled operating system software on my MacBook Air (Yosemite 10.10.3) and tried reinstalling Adobe Acrobat 9 Pro.  I was able to install the software into my Applications folder but I was unable to enter the serial number or go any further with the

    I reinstalled operating system software on my MacBook Air (Yosemite 10.10.3) and tried reinstalling Adobe Acrobat 9 Pro.  I was able to install the software into my Applications folder but I was unable to enter the serial number or go any further with the installation.  When I click on the Adobe Acrobat icon in the Applications folder, nothing happens.

    Hi Tom,
    kindly check the System requirements | Acrobat family of products—older versions (XI, X, 9)
    For serial number message try: 
    Error "Invalid serial number" | Acrobat 9 | CS4
    Thanks,
    Atul Saini

Maybe you are looking for

  • What steps to I have to take when selling my iPhone?

    I am selling my iPhone 4S for the iPhone 5, and I want to make sure that all of my data is cleared from the 4S before the buyer uses it.  I see that there are a couple of options under setters to reset the phone, so what one do I choose to use?  Shou

  • Video purchased from itunes not playing on 80gb ipod

    I bought some videos on itunes. I when I synced my Ipod (80GB) I only hear the music and don't see the video. I read that they have to be converted ("To IPOD" under the advanced tab) but this option is not available. What's the deal? I paid money for

  • My computer crashed. How do I authorize the new one for my iPod nano?

    My old computer crashed and I restored the music off the iPod back onto this new computer and into iTunes. But, it keeps saying I don't have priveleges to do something. I think it's because the iPod is only registered for the old computer?? I don't k

  • Possible to Lock Folder?

    I'm wondering if it's possible to lock a folder in Dreamweaver, so that no one can access its index on the internet and see all the folders inside it. Basically, I have a galleries folder (www.website.com/galleries/) and within that folder are galler

  • CS5 freezes on startup (Windows 7)

    I'm considering making the jump from Vegas Pro 8 to Premiere. Downloaded the 30-day Trial for PPro CS5; it installs fine, but freezes on startup. I've read everything I can find on this, tried all the ideas I've come across, but still no go; so I'm l