PATH setting bug?

JDeveloper 9.0.3.1035 does not use the path environment setting on windows 2000.
I 'm using a few java classes that depend on dlls that are on the system's search path, when running my class from the command prompt with java the class will run. Running the class from JDeveloper fails with a java.lang.UnsatisfiedLinkError.
Any ideas?
Regards,
Jelco.

Sorry, my mistake: it works but I forgot to put some classess on the project's classpath.
Regards,
Jelco.

Similar Messages

Won't compile-even with correct path set up

NEVER MIND - It helps when you don't have a typo in the application. :-(
Please disregard this post.
I've read the archives. I actually got everything to work fine on my desktop. I'm now trying to get the "Hello World!" application to compile on my lapttop. I am getting the standard "javac is not recognized . . ." error.
I've checked my path set up. My javac.exe is in the bin file of the jdk1.6.0_02 folder in my C drive. I have my application in the C drive in a folder "Java"
c:\Java>javac HelloWorldApp.java
What am I missing? Yes, I've just started to learn this language and would appreciate all the patience and help I can get.
Thanks,
Gizelle
Message was edited by:
simplyGizelle

Hi your classpath is not set when so you can go to the folder(bin) where
javac.eze is and give the absolute path of the java file you want to comiple.

LoadLibrary doesn't use java.library.path set at runtime

I'm trying to set the property java.library.path at runtime so I don't have to drop my .dll in the regular system path for a System.loadLibrary to work. This is the sequence I use in a static initilizer:
System.setProperty("java.library.path", "C:\\");
System.loadLibrary("DialButton");
When I put the file DialButton.dll in C:\ I get an java.lang.UnsatisfiedLinkError, but when I put it in D:\WINNT it works fine. I would expect it to do the opposite because presumably I blew away the real java.library.path when I ran setProperty and it shouldn't know to check D:\WINNT.
I'm trying to keep my application install clean and use a directory structure that maintains all of the required files without cluttering system directories. I also want to dynamically load JNI libraries for a distributed application after copying them to the local machine.
Thanks in advance,
Ryan

In the bug parade I've heard excuses from Sun programmers that this is a read-only property and isn't supposed to be changed. It probably took them longer to write the reply to the bug than it would have to fix the code.
I looked at the source code for the ClassLoader and for the source release of the JDK 1.3.1 and here's the code I found in the ClassLoader.loadLibrary() method:
        if (sys_paths == null) {
                usr_paths = initializePath("java.library.path");
                sys_paths = initializePath("sun.boot.library.path");
        }It seems it parses and caches the system and user library paths on startup and then never bothers to check them to see if they've changed ever again. I think it would be pretty simple to rewrite that code block by moving one line of code down two lines as this:
        if (sys_paths == null) {
                sys_paths = initializePath("sun.boot.library.path");
        usr_paths = initializePath("java.library.path");I mean, it's not as if loadLibrary is really performance intensive or even critical enough to bother caching at all!
This one code change could fix a lot of headaches.
The particular headache I'm working on is that there doesn't seem to be any support in the Servlet 2.2 or 2.3 specification for JNI files. I'd really love to be able to use a directory like WEB-INF\jni to store libraries that need to be distributed with my web application. I tried to dynamically change java.library.path to include WEB-INF\jni, but alas I ran into the same problem you did, it doesn't work.
Is is possible for this to be fixed, ever? I think it would take longer to say no and make up a reason why not then it would to actually make the fix... seems a good enough arguement to do it to me.
And alternately, can we come up with a standard place to put JNI stuff for web applications in the next Servlet standards?
Thanks in advance!
-J.C.
[email protected]

ConfigFile Read Key (Path).vi BUG?

I want to Read a UNC Path from my Configuration File.
[Path]
UNC_Path=\\Hssvr01\5_Test_Data\17_Labview\2009
For this I use the LV2009 VI Read Key (Path).vi and as result I get:
H:\ssvr01\5_Test_Data_Labview\2009
When I set in the Configfile the UNC Path to:
UNC_Path=\\\\\Hssvr01\\5_Test_Data\\17_Labview\\2009
The result is:
\\Hssvr01\5_Test_Data\17_Labview\2009
This looks OK but I updatated from LV8.2.1 to LV2009 and in LV8.2.1 the variant with "UNC_Path=\\Hssvr01\5_Test_Data\17_Labview\2009" gives me as result "UNC_Path=\\\\\Hssvr01\\5_Test_Data\\17_Labview\\2009"
Why this have in LV2009 changed? Is this a Bug?
In the LV2009 help I found this:
http://zone.ni.com/reference/en-XX/help/371361F-01/glang/unc_filename_support_of_io/
Isn't this valid for Read Key (Path).vi?
Attachments:
UNC_Path_LV2009.vi ‏13 KB
Config.ini ‏1 KB

Check towards the bottom of this help page (also available from within LabVIEW)
Quote:
"The Configuration File VIs can read and write raw or escaped string data. The VIs read and write raw data byte-for-byte, without converting the data to ASCII. In converted, or escaped, strings LabVIEW stores any non-displayable text characters in the configuration settings file with the equivalent hexadecimal escape codes, such as \0D for a carriage return. In addition, LabVIEW stores backslash characters in the configuration settings file as double backslashes, such as \\ for \. Set the read raw string? or write raw string? inputs of the Configuration File VIs to TRUE for raw data and to FALSE for escaped data."
All clear?
LabVIEW Champion . Do more with less code and in less time .

Image path sets ( servername) instead of \\servername

Due to a hardware meltdown I have had to rip the NW server out of the tree
and install a new one.
I have re-installed the server NW65sp8 and reinstalled ZENworks for Desktops
7
Now, When I set an imaging job on a workstation I browse to the server etc
and set the file path.
When I click apply or ok leave the object and go back in the path has
changed;
eg
(ZFDSRVSR) USER\zenimg\ws_master.zmg
instead of
\\ZFDSRVSR\USER\zenimg\ws_master.zmg
Any ideas on how I fix this?
Manual imaging works ok. I have deleted the ws object and re imported into
eDir
Tom

I have resolved this.
>>> On 21/07/2010 at 12:54 p.m., in message
<[email protected]>,
Tom Cummings<[email protected]> wrote:
> This is turning out to be serious ant not server related. I installed a
> new
> ZFD7 server into a new container. Setting an image path on using that
> server reproduces the same problem.
>
> Help! :‑(
>
>
>
>>>> On 20/07/2010 at 9:07 AM, in message
> <[email protected]>,
> Tom Cummings<[email protected]> wrote:
>> Due to a hardware meltdown I have had to rip the NW server out of the
>> tree
>> and install a new one.
>>
>> I have re‑installed the server NW65sp8 and reinstalled ZENworks for
>> Desktops
>> 7
>>
>> Now, When I set an imaging job on a workstation I browse to the server
>> etc
>> and set the file path.
>>
>> When I click apply or ok leave the object and go back in the path has
>> changed;
>>
>> eg
>>
>> (ZFDSRVSR) USER\zenimg\ws_master.zmg
>>
>> instead of
>>
>> \\ZFDSRVSR\USER\zenimg\ws_master.zmg
>>
>> Any ideas on how I fix this?
>>
>> Manual imaging works ok. I have deleted the ws object and re imported
>> into
>> eDir
>>
>> Tom

How is system PATH set in Solaris 10?

When I issue "echo $PATH" after starting bash shell, default system paths are displayed. I noticed there is no *.bashrc* file anywhere on the system. Then from which script(s) and in what order are these paths get set?

bobthesungeek76036 wrote:
Probably a combination of /etc/default/login and /etc/profile.Today I confirmed. /etc/profile does not set the PATH. /etc/default/login sets only /usr/bin for all users and /usr/sbin for root. But my initial PATH variable contains other paths, too. It essentially means there is some other startup script(s) which influences PATH variable. Moreover, if I create /.bashrc and set the PATH, it overrides the system default path.

Path setting

Hi everyone,
Can anybody helps to answer my question?
1. I put my class file (test.class) in the folder webapps\examples\WEB-INF\classes and it works fine for the url http://localhost:8080/examples/servlet/test. However, if I put the class file in the folder webapps\examples\WEB-INF\classes\folder, it doesn't work for the url http://localhost:8080/examples/servlet/folder/test. Do I need to set something in the conf folder or I typed the wrong url?
2. For the jsp files, it works at the folder webapps\examples\jsp\*. If I put the jsp files in the webapps\examples\WEB-INF\jsp\*, the jsp files won't work. What's wrong also.
Thanks.

Hy,
Hi everyone,
Can anybody helps to answer my question?
1. I put my class file (test.class) in the folder
webapps\examples\WEB-INF\classes and it works fine for
the url http://localhost:8080/examples/servlet/test.
However, if I put the class file in the folder
webapps\examples\WEB-INF\classes\folder, it doesn't
work for the url
http://localhost:8080/examples/servlet/folder/test. Do
I need to set something in the conf folder or I typed
the wrong url?For each package part in your Servlet Class, a Folder must exist.
eg. If your Servlet has package mywork.test,
the Path is : examples\WEB-INF\classes\mywork\test
Your second Url assumes your Servlet has a package folder.
Currently it seams, you haven't set one.
If you add a package statement in your test.class, it should work.
2. For the jsp files, it works at the folder
webapps\examples\jsp\*. If I put the jsp files in the
webapps\examples\WEB-INF\jsp\*, the jsp files won't
work. What's wrong also.
Thanks.All Content under WEB-INF is protected from calling outside of the
Server. Files under WEB-INF are allowed to be called, eg. with
a RequestDispatcher, but not directly with a Browser Request.
Hope, that helps you a bit.
Best regards
jherunter

Offset path dimension bug

Using Illustrator CC (18.1.1 64bit)
When I create any object the object size is indicated in two editable boxes in the "Shape" section along the top bar (if you stretch out the Illustrator program window it will appear alongside the alignment buttons and the X/Y position boxes). The size of the object is for example, 200 x 100mm.
If you then use Object > Path > Offset Path and do say 5mm, the boxes should read as 190mm then 90mm. However it says 90mm then 190mm. It has now switched the dimensions around. When you edit them by say changing the 90 to 80mm (which is shown in the with dimension box), it changes the height of the object but remains written in the width dimension box.
There is clearly a bug here, however in the W: and H: boxes (to the right of the X: and Y: boxes, it is shown correctly.
So this problem is only apparent with the Shape section of the top command bar. It only seems to occur with the offset path command.

My plotter won't be happy with that solution when he starts cutting vinyl...
But for designing no problem.
In response to this I think the answer is to update Doug gave the answer to the problem. This is not the first time this has been posted and the answer I gave originally way back when CS 3 was release was to make an action or write a script.
But since CS4 fixes the problem the better solution is to upgrade and there are other benefits by upgrading to CS 4 as well.
So as far as i can see Doug still has the answer and they should mark it answered ok they don't like that answer then let them make your answer as the right way to go but it has been answered. One way or the other.
But I do think you guys will be happier with CS 4. Even though you have to pay for the upgrade.
Glad to be a hoot!

Volume setting bug

On a 17" i5 2010 MBP (4GB/1,5 TB SSD) I've noticed that the audio volume setting fails when the audio output switches between the built-in speaker and the headphones (ear pods) and vice-versa. If I startup the mac with the headphones connected, the volume control works until I disconnect the phones and the audio output switches to the internal speaker.
Any idea?

I have done some testing in the last 20 minutes and am convinced there is a conflict caused by Final Cut Express 3.0.
I opened and closed Audacity, Sound Studio and iMovie three times each with no problem.
I did the same with FCE and each time the Line In Volume control had reverted to the 50% setting.
So it appears there is a bug (at least with my setup).
Is there a cure - other than resetting System Preferences every time?
Ian.

Workaround for keyword button sets bug

Thought I'd post this in case anyone else is beating their head against a wall trying to use custom keyword button sets.
BUG: Control bar sometimes displays the wrong captions for the keyword buttons. Cause: Deselecting a keyword button set in the "Edit buttons" dialog will cause any active button sets after it to appear corrupted in the control bar. For example, with the default set of "Photo Descriptors, People, Stock Categories, Snapshots, ..." try unchecking the Stock Categories button set. When you return to the control bar, use the popup button set selector (just under "Add Keyword") to select Snapshots. Instead of the Snapshot keyword buttons, you will instead see the button captions from Photo Descriptors, though if you click one of those buttons, it will apply the appropriate keyword from the Snapshots set.
Workaround: Rearrange the order of the button sets list in the Edit Buttons dialog to make all checked button sets appear before all unchecked button sets. In other words, don't have any gaps where you have an unchecked button set followed by a checked button set.
Cheers,
Paul

You are my hero!!!! This is exactly what I was looking on here for. Thanks again.

ITunes 9.2 - Genre Setting Bug

Has anyone worked a way to stop iTunes automatically choosing Genres for songs - when the chosen Genre contains a number in it's name ?
e.g. Rock 90's will set itself to Folk or Avantgarde .... ?
Only seems to be a bug with Genre's that contain numbers. VERY VERY Annoying when you use Genres extensively.....

Looks like iTunes 9.2 is reading the first few characters of the Genre and intrepreting it as one of the pre-defined genres used in the ID3v1 specification.
If you re-apply the desired genre it may stick. If not, then the problem might be that the file in question has both an ID3v1.x & ID3v2.x tag, which is allowed by the specfification, but not well supported by iTunes. I think that in some circumstances iTunes may update the v2.x tag, but then re-read the unedited v1.x information.
The workaround will be to Convert ID3-Tags > None two or three times, then Convert ID3-Tags > v2.3. Don't use v2.4, as as fara as I'm aware, this too seems to not be properly supported by iTunes.
tt2

Keyword Set Bug?

When switching between keyword sets using "command 0" the keywords of the new set having the same position (keypad number) of keywords selected in the previous set are highlighted and must be chosen twice (once to remove highlighting and once to select). Is this a bug or something I am doing incorrectly? Using MacPro.

Canon EOS 400D (aka. XTi) • 20" iMac Intel • 12" PowerBook G4 • OS X 10.4 • LR 1 • PSE 4

% opatch apply $PATH set question

# % cd 5496862
# Ensure that the directory containing the opatch script appears in
# your $PATH;
% opatch apply
How i can setup this $PATH? what's the command, ORACLE_HOME & PATH are already set as
export ORACLE_HOME=/oracle/product/9.2.0.8
export PATH=$ORACLE_HOME/bin:$PATH

Put the script somewhere in the existing path. For example at $HOME.

Regarding class path setting

Hi,
I am new to java How can i Set a class path in my sytem to run java programs and tomcat and ant .
I declated like below in Environment varialble.
JAVA_HOME
c:\javasdk\jdk\jre\ext;C;\javasdk\bin;
ANT_HOME
c:\ant\bin;
CATALINA_HOME
C:\tomcat\bin;c:\tomcat\common\bin;
when I am running the startup.bat in commandprompt the it showedd me aan error like this.
CATALINA_HOME environment variable is not deffined correctly, this environment variable is needed to run thhis proram.
when I am running the ANT then it showed me an error like this.
build.xml file does not found. But i Wrote the build.xml file in ant\bin.
Please let me know the where is sthe mistake. It is very urgent to me.

I love all these questions that go "I'm really new to Java, so new I don't even know how to set or use a classpath. How do I get my application server to work?"
Like a first-week med student trying a heart transplant

Precomposed layer does not recognise opacity setting (bug)

Hi
I have a very simple precomposed layer comprising a single text layer with a drop shadow (layer style). However, it does not recognise the opacity setting in the main layer, even when set to 0% and the playhead is not even on the layer. If I change the opacity in the precomposed layer I can see it coming through to the main layer, but changing the opacity in the main layer does nothing.
I have reported this to Adobe as a bug, anyone have any other ideas?
Thanks
Antony

There is a fix. Apply a layer style to your pre-comp, then turn off the any styles. CR will now evaluate layer styles in your source comp and render them in the proper order.
Why does that work? You have to understand how CR works. When you turn on Continuous Rasterization the layer type is identified before any effects or transformations take place. This is why you can scale a vector layer without problems if CR is turned on. This explains why a 3D pre-comp that contains a 2D layer will be rendered as a 2D layer.
When you apply a Layer Style you are changing the layer type in the same way you change a layer type from 2D to 3D. If you want to have transformations applied to the layer style in the source file you need to change the layer type of the pre-comp layer to Layer Styles.

PATH setting bug?

Similar Messages

Maybe you are looking for