Path-through authentication on WAP321 access point

Dear colleagues!
There is a task to perform webauth without entering username/password on WAP321 AP (path-through authentication).
We need to eliminate captive portal page which requests username type-in. After connecting to the network user has to be redirected to company's website without any captive portal.
How to achieve this?
Thank you!
Yuriy

Hi Diane,
This is a very good question that comes up every once in a while. As you can see from the answers in the links below,there are alot of factors that come into play. The consensus from everything I have read and experienced would be 20-25 users per AP depending on actual applications etc.
Have a read for some great answers provided in this forum by some excellent "hands on" experts:
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=General&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.ee9a96d/2#selected_message
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=General&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1dd6c0a5/0#selected_message
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=Getting%20Started%20with%20Wireless&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1dd5f1ca/0#selected_message
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=WLAN%20Radio%20Standards&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.eeab5db/1#selected_message
Here is a Cisco doc that relates to this question;
Q. How many clients can associate to the AP?
A. The AP has the physical capacity to handle 2048 MAC addresses. However, because the AP is a shared medium and acts as a wireless hub, the performance of each user decreases as the number of users increases on an individual AP. Ideally, not more than 24 clients should associate with the AP because the throughput of the AP is reduced with each client that associates to the AP.
From this Q&A doc;
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_qanda_item09186a008009483e.shtml
Hope this helps!
Rob

Similar Messages

IOS 6.0.1 - Problems with certificate based authentication on wireless access point

Hi all
We are using iPad 2 as order terminals in our shops for about 5 months. Some of the iPads (the first who entered the field) started to cause problems now. These iPads are no longer able to keep long-term connection to the wireless access point in our stores. After selecting the SSID a successful authentication using the stored EAP-TLS certificate is performed (this can be seen in the log files of our wireless controller and by the IP adress that is given by DHCP). But within seconds the affected iPads opening up a captive portal page (empty, without contents) and separates the connection to the SSID after a short time again.
Affected are currently only iPads 2 with iOS 6.0.1, which were staged about 5 months ago. The newer devices with iOS 6.1+ connect without problems and open no captive portal page. The first cases occurred on the last Wednesday. Before that everything worked without difficulty. No modifications took place on the security structure. The numbers of affected devices increased until all iOS 6.0.1 were affected.
Access to other SSIDs (without use of certificates, by entering a key) for the devices is still possible (the devices does not open an captive portal page). The DHCP scope is not used up, so there are enough IP addresses available.
"Newer iPads" with an iOS of 6.1+ are are showing no problems on the same wireless access point, where the older devices are rejected. New and old devices use the same certificates and authentication mechanisms.
In the analysis of the issue, it turned out that the problem can be solved by an update to iOS 6.1.3. Subsequently, the iPads will be able to rebuild a connection with the access point, without a captive portal page.
Since the bandwidth is very narrow dimensioned in our stores, the communication of the iPads was severely restricted. Thus, the iPads are for exampleare accessible for the APNS but can not find iOS updates or check for their availability.
A comprehensive update to iOS 6.1.3 is currently excluded.
Does anyone knows this issue? What else can be done (except from updating)?

I will answer my own question in case it helps anyone else.
It would "seem" the ios 6 devices try the proxy and if that is not working they resort to the def gateway.
To Fix I did the following:
Brocade WIFI network has IPS and Advanced Firewall rules that seemed to be tthwarting some traffic, the iphones would then try the default gateway and be blocked at the FW.
I disabled the IPS and the Advanced Firewall Settings on the wifi as they are redundant to our main IPS and firewall that all traffic flows through anyway. I will tune it later, but when the CEO is demanding a fix "**** the security, full speed ahead"
Created some rues on the firewall to allow...
- IMAP-SSL (port993) outbound
- SMTPS (port 465) to yahoo servers outbound
- tcp port 587 to yahoo servers outbound
- https to akamai servers
Most http and https goes through the proxy as it should, BUT...
It seems that the akamai traffic allways ignores the wifi proxy settings and just heads straight for the default gateway. I suspect there is a bug in the icloud app?
Hope this helps someone else.
-Bo

Accessing a WRT160Nv2 through a Netgear WG602v4 access point?

I need some sort of extender to ensure the wireless signals reaches upstairs in my house. The only one that Best Buy was the Netgear WG602v4. Doing my best to follow directions, I got the WG602 configured as the WRT160N from an SSID and security/password perspective. However, none of the computers connected to the access point can access the Internet. I've tried the WG602 both in point to point and repeater modes.
A number of the forums talk about settings that I don't seem to have on the WRT as well as something called WDS.
Does anyone know if I can use the WG602 as an access point for the WRT160N and, if so, how I can make it happen?
Thanks.

Thanks for trying to help. I wonder if the two devices just aren't compatible -- one is Linksys and the other is Netgear.
I've also been reading about something called WDS, and the WRT160Nv2 doesn't seem to have WDS - or at least I can't find it.
I can still get other devices to connect to the WG602v4, but no Internet through it.
You said to give the WG602v4 the same default gateway as the Linksys router. According to my router that default gateway is 151.164.182.113. However, when I enter that into the Netgear device, it won't take.
Any more ideas from anyone?

IOS 4.2.1 breaks web-based authentication to wifi access points

Whenever I tried to access the *wifi access points* I use more often *whose authentication is web-based*, like the one at my public library or at my office, although I input my username and password correctly, I am always bounced back to the login form.
Before iOS 4.2.1 I know that there was a problem of this sort already, related to *some incompatibility between Safari's auto-fill features and the access points*, that could be solved by simply turning off auto-fill, and I did that. But know *it looks like the problem got to a new level of subtlety*.
Interestingly, *everything worked nicely while I was using the Gold Master version of iOS 4.2.0* that never made it to release, so the solution has to be found among the differences between 4.2.0 and 4.2.1, if you're an Apple engineer reading this.
Can you help? Any idea or trick to try that I didn't already? Thanks!
Giacecco

Hi Richard,
You mentioned that 'Apple put the AirPrint spec out there for all printer makers'. I've been looking around but I haven't found any spec. Where did you find it?
Do printer makers have to buy a license in order to be able to advertise that they've implemented the AirPrint protocol? Is there maybe an Apple review process in place?
TIA
Geert

No AirPlay when connected through access point

I have my wireless setup with a main router in one room and another router (a DIR615) in another room setup as an access point.
I have an Apple TV 2. gen which is hooked up by ethernet.
Everytime Im connected wirelessly through the main router, AirPlay works fine, by when Im connected through the DIR615 (the access point), theres no AirPlay.
When Im on the access point everything else seem to work fine - only thing thats missing is AirPlay. Oh and Remote has the same issue.
The DIR615 has an option called "Use as access point" which I turned on. Then I set it to broadcast the same SSID as the main router with the same password. Is that wrong set up?
I can access my other device like my NAS with no problems through both the main router and the access point.

I have noticed a similar issue.
Years ago, I extended my original wired network with an Airport Express (AE) acting as a bridged access point. When I got my iPod Touch, I noticed that the AE would go out to lunch occasionally if the WiFi on the Touch was on. But when the AE was functioning correctly, I could do AirPlay from the Touch to the AE.
With the addition of an iPhone and another Touch in the house, the AE was becoming more flaky, so I bought an access point product from Trendnet. This device bridges another wireless network to the same IP subnet (192.168.1.0/24) as the wired and AE wireless network, but it is a different wireless network (SSID) from the AE wireless. This allows me to configure the handheld devices to only connect to the Trendnet. Now the AE no longer crashes. (Pretty ironic that I need to buy a non-Apple device to get it to work...).
However, I do not get the AirPlay icon when a handheld is connected to the Trendnet network. I just tried connecting one of the Touches to the AE wireless and when I do, voila, I do get the AirPlay icon.
Theoretically, the path taken to the AE from the handheld shouldn't matter, but it looks like Apple engineered it so that it does. Maybe AirPlay doesn't run over IP?? It is disappointing and I hope it gets fixed.

Dynamic VLAN Assignment with RADIUS Server and Aironet Access Points

Hi Guys,
I would like to go for "Dynamic VLAN Assignment with RADIUS Server and Aironet Access Points 1300". I want the AP to broadcast only 1 SSID. The client find the SSID ->put in his user credential->Raudius athentication->assign him to an specific vlan based on his groupship.
The problem here is that I don't have a AP controller but only configurable Aironet Access Points 1300. I can connect to the radius server, but I am not sure how to confirgure the AP's port, radio port, vlan and SSID.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml#switch
I go through some references:
3.5 RADIUS-Based VLAN Access Control
As discussed earlier, each SSID is mapped to a default VLAN-ID on the wired side. The IT administrator may wish to impose back end (such as RADIUS)-based VLAN access control using 802.1X or MAC address authentication mechanisms. For example, if the WLAN is set up such that all VLANs use 802.1X and similar encryption mechanisms for WLAN user access, then a user can "hop" from one VLAN to another by simply changing the SSID and successfully authenticating to the access point (using 802.1X). This may not be preferred if the WLAN user is confined to a particular VLAN.
There are two different ways to implement RADIUS-based VLAN access control features:
1. RADIUS-based SSID access control: Upon successful 802.1X or MAC address authentication, the RADIUS server passes back the allowed SSID list for the WLAN user to the access point or bridge. If the user used an SSID on the allowed SSID list, then the user is allowed to associate to the WLAN. Otherwise, the user is disassociated from the access point or bridge.
2. RADIUS-based VLAN assignment: Upon successful 802.1X or MAC address authentication, the RADIUS server assigns the user to a predetermined VLAN-ID on the wired side. The SSID used for WLAN access doesn't matter because the user is always assigned to this predetermined VLAN-ID.
extract from: Wireless Virtual LAN Deployment Guide
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00801444a1.html
==============================================================
Dynamic VLAN Assignment with RADIUS Server and Wireless LAN Controller Configuration Example
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml#switch
==============================================================
Controller: Wireless Domain Services Configuration
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801c951f.shtml
Any help on this issue is appreicated.
Thanks.

I'm not sure if the Autonomous APs have the option for AAA Override. On the WLC, I can go into the BSSID, Security, Advanced, and there's a checkbox that I would check to allow a Radius server to send back the VLAN.
I did a little research and it looks like the 1300 may give this option but instead is defined as "VLAN Override". I've found the release notes for 12.3(7)JA5 (not sure what version you're running) that give mention and a link to configuring EAP on page 4: http://www.ciscosystems.ch/en/US/docs/wireless/access_point/1300/release/notes/o37ja5rn.pdf
Hope this helps

Airport Express and Range Extenders and Access points.

My setup is as follows
Main wireless router is a Dlink DIR-635, with SSID 'id1'
A Edimax range extender, with SSID 'id2'
A small network with a PC and a mediaplayer connected to a Jensen router acting as a switch. This network is connected to the wireless network with SSID 'id1'
through a TP-Link access point.
I want to stream music from my PCs and Ipad to the Express using Airplay.
The 'id2' network has the best signal in the room where I want the Express.
Connected the Express to this network, but it didn't show up as an available speaker neither on the Ipad nor on my PCs.
Connected the Express to the other network 'id1'. Now it shows up on my Ipad and a portabel PC. Both connected to network with SSID 'id2'.
But the PC connected to the wireless network through the TP-link, is still unable to find the Express.
Does this sound familiar to anyone?
What protocoll does Airplay use? Does the Express send any broadcast messages to inform other devices that is is in the network?
Seems to me that the Airplay protocoll is filtered by the extender and the access point.
Any hints will be appreciated.

If you are asking about "extending" or "repeating" the wireless signal, you will need both an Apple main router and an Apple extending device.
The AirPort Express (and other Apple routers) can only "extend" a wireless signal from another Apple router.

301 access point configuration

In Nokia manuals I found no information about access point configuration.
In my 301 I have two “path”.
1). at configuration/data communication/access point. There I see 10 access point configuration.
2). at configuration/personal configuration. There I can create detailed “personal” configurations and later can use it as active.
Question #1: what is the priority between 1 and 2? I mean 2 overwrite 1 or this two have coexistence?
Question #2: At personal configuration I can assign a flowing type of “subconfiguration”: “Web”, “Multimedia”, ” Continuous download”, “Access Point”. What is scope of each subconfiguration? I mean for example “Web” and “Access Point” is not a same?
Question #3: There is any useful manual about 301 access point configuration?
Thanks for any advice…

kzsolt wrote:
What is the priority between 1 and 2?
None. That first path you mentioned, that ‘active access point’ is just for computer tethering …
kzsolt wrote:
I mean for example “Web” and “Access Point” is not a same?
Can be. ‘Access Point’ is the preferred access point which your Nokia uses for all its built-in apps. With ‘Web’ you can override that for HTTP(S) based apps because some operators did have WAP proxies in the past. Nowadays, with modern contracts, you just create one Access Point account, there you specify the APN. And then you create a Web account and leave it at its defaults.
kzsolt wrote:
Is there any useful manual about 301 access point configuration?
Not aware of. This concept was introduced in 2004 and I never met anyone at Nokia who understood that concept. Therefore, Nokia has problems to explain it. Actually, the software engineer who created it in 2003/2004 did not understand it either because, from the user interface, it is not possible to create a WAP proxy for an ‘Access Point’ which left many users in the dark …
Therefore, if you have a question, just ask us, please. Did that help?

Access Point POP authentication

Here everyone,
I would like to know if is possible to authenticate Access Point users by using their GMAIL accounts?.
I guess Google could provide some kind of Radius authentication using POP3 service or maybe, some third party Radius server could support POP3 authentication through Gmail accounts.
Thanks a lot in advance

I don't think that is possible.. you would have to know the users google account. Anyway's... wireless is separate and if the students are on the domain, just use PEAP or machine authentication and allow the Chrome books to logon to the network first.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

How to use Axis to access a web service through Authentication proxy

Using axis access internat web service is success,but access a web service through Authentication proxy is failure.But other java classes connect through a proxy to the internet which works very well:
please help me ,thank you!!!
import org.apache.axis.client.Call;
import org.apache.axis.client.Service;
import javax.xml.namespace.QName;
//this is my access webservice faliure   codes
public class TestClient
   public static void main(String [] args) {
       try {
            System.getProperties().setProperty("http.proxySet", "true");
            System.getProperties().setProperty("http.proxyHost","proxy.com");
            System.getProperties().setProperty("http.proxyPort", "8080");
            System.getProperties().setProperty("http.proxyUser", "username");
            System.getProperties().setProperty("http.proxyPassword","password");
           String endpoint =
                    "http://nagoya.apache.org:5049/axis/services/echo";
           Service service = new Service();
           Call     call    = (Call) service.createCall();
           call.setTargetEndpointAddress( new java.net.URL(endpoint) );
           call.setOperationName(new QName("http://soapinterop.org/", "echoString") );
           String ret = (String) call.invoke( new Object[] { "Hello!" } );
           System.out.println("Sent 'Hello!', got '" + ret + "'");
       } catch (Exception e) {
           System.err.println(e.toString());
   }I get an "(407)Proxy authorization required" error?

I am also looking for a solution. Does any one know how to do through code instead of jvm settings?
Thanks in advance!

I can't get my macbook to access shared files on a windows computer when it's connected through a wireless access point.

I recently bought a Netgear Wireless Access Point to use in the office so we can have a wireless network. I configured the wireless network, and I am currently connected to the internet. However, I no longer can access the shared files on the Windows computers like I could when I was hardwired in with an ethernet cable. I've disabled all of the internal firewalls on all of the computers (and there's no firewall built into the WAP), all the computers are on the same workgroup, and I've tried accessing the computer with the shared files directly via the IP address using the instructions found here http://docs.info.apple.com/article.html?path=Mac/10.5/en/8849.html.
My computer sees that the other computers on the network are there. They show up in the network view from the finder. However, when I try to connect to them, it tells me the connection failed. When I click connect as, it says:
"Connection Failed
"The server “PC-ASSISTANT” may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
When I try to connect via the "connect to server" on the finder, I type in "smb://10.0.0.103/Word Processing" It tells me:
"There was an error connecting to the server “10.0.0.103”. Check the server name or IP address, and then try again.
If you are unable to resolve the problem contact your system administrator."
I have no clue what the problem is. I'm not really an IT person or a networking guru. Can someone please help?

You posted in the Older Hardware forum, which is for pre-year 2000 hardware. Suggest you post your question in the Airport forum at https://discussions.apple.com/community/wireless/airport
 Cheers, Tom

Wireless Client Authentication issues when roaming Access Points (Local)

I have a Cisco 5508 with Software version 7.4.121.0 and Field Recovery 7.6.101.1.
There are a handful of clients that when roaming between AP's with the same SSID that get an authentication issue and have to restart the wireless to get back on.
From Cisco ISE
Event
5400 Authentication failed
Failure Reason
11514 Unexpectedly received empty TLS message; treating as a rejection by the client
Resolution
Ensure that the client's supplicant does not have any known compatibility issues and that it is properly configured. Also ensure that the ISE server certificate is trusted by the client, by configuring the supplicant with the CA certificate that signed the ISE server certificate. It is strongly recommended to not disable the server certificate validation on the client!
Root cause
While trying to negotiate a TLS handshake with the client, ISE expected to receive a non-empty TLS message or TLS alert message, but instead received an empty TLS message. This could be due to an inconformity in the implementation of the protocol between ISE and the supplicant. For example, it is a known issue that the XP supplicant sends an empty TLS message instead of a non-empty TLS alert message. It might also involve the supplicant not trusting the ISE server certificate for some reason. ISE treated the unexpected message as a sign that the client rejected the tunnel establishment.
I am having a hard time figuring out what is causing this. My assumption is if there were a problem with the Controller or AP configurations then it would happen to everyone. My further assumption is if the client had a problem with their laptop (windows 7) then why does work at other times? So I have checked and the ISE certificate is trusted by client.
Is something happening that the previous access point is holding on to the mac and the return authentication traffic is going to the old AP instead of the new one or something like that which is corrupting the data?
I also had this from Splunk for the same client:
Mar 5 13:44:51 usstlz-piseps01 CISE_Failed_Attempts 0014809622 1 0 2015-03-05 13:44:51.952 +00:00 0865003824 5435 NOTICE RADIUS: NAS conducted several failed authentications of the same scenario
FailureReason="12929 NAS sends RADIUS accounting update messages too frequently"
Any help on this would be appreciated. These error messages give me an idea but doesn't give me the exact answer to why the problem occurred and what needs to be done to fix it.
Thanks

Further detail From ISE for the failure:
11001
Received RADIUS Access-Request
11017
RADIUS created a new session
15049
Evaluating Policy Group
15008
Evaluating Service Selection Policy
15048
Queried PIP
15048
Queried PIP
15004
Matched rule
15048
Queried PIP
15048
Queried PIP
15004
Matched rule
11507
Extracted EAP-Response/Identity
12500
Prepared EAP-Request proposing EAP-TLS with challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12301
Extracted EAP-Response/NAK requesting to use PEAP instead
12300
Prepared EAP-Request proposing PEAP with challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12302
Extracted EAP-Response containing PEAP challenge-response and accepting PEAP as negotiated
12318
Successfully negotiated PEAP version 0
12800
Extracted first TLS record; TLS handshake started
12805
Extracted TLS ClientHello message
12806
Prepared TLS ServerHello message
12807
Prepared TLS Certificate message
12810
Prepared TLS ServerDone message
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
12305
Prepared EAP-Request with another PEAP challenge
11006
Returned RADIUS Access-Challenge
11001
Received RADIUS Access-Request
11018
RADIUS is re-using an existing session
12304
Extracted EAP-Response containing PEAP challenge-response
11514
Unexpectedly received empty TLS message; treating as a rejection by the client
12512
Treat the unexpected TLS acknowledge message as a rejection from the client
11504
Prepared EAP-Failure
11003
Returned RADIUS Access-Reject

Upgrading controllers and access points through NCS

I am currently trying to upgrade all of my controllers and access points to the newest version. I have downloaded the file and loaded it on the ftp server running on the Cisco NCS server. I tried to go to configure>controllers and Download Software(ftp) and go. I setup the schedule and it says failure. The details say %Error:Code file transfer failed - Connection Timeout. Sorry if this is a basic thing that I am missing. I have tried using an internal ftp server as well and it errors out also. Any help would be greatly appreciated.

It is setup with NCS Prime running 4 WiSM blades and 3 WiSM 2 blades in 6509 chassis. I am going in through NCS and doing configure controllers and download software(ftp) from the select a command dropdown. When I setup it up this way I have to select schedule unless I want it to automatically download and reboot the controllers, which I was trying to avoid so that I could do it during the day. It just keeps timing out on the download portion.

Automatic Email Retrieval through Access Point Gro...

Hi,
Has anyone else had problems with applications locking up while using 'Automatic Retirieval' through 'Access Point Groups' on a wireless network?
My phone works fine in every other respect but as soon as I schedule it to access my email account (not BB) I invariably get one of the following instabilities:
The email application will not collect at the set intervals or...
It'll collect emails at the set intervals for a while & then lock up either the:
• Email application,
• All internet applications,
• The 'Email key' (but the application is still accessible via the icons).
• or the Email Key loses its settings: ‘Item no longer available. Restoring default multimedia key’
I can manually collect email & use the web through the same ‘Access Point Group’ & I have two other computers running off this wireless network fine?
Nokia E61. Firmware: 1.0310.04.04Message Edited by infinitybeach on 13-Jun-2006
11:28 AM

This sounds like a reasonable request, is the v11 firmware just broken in this regard?

Intermittent problem with access point (WAP321)

We hane an intermittent problem with our Wifi access point WAP321. Suddenly, all clients are unable to access Internet, server and local network. The signal is 100%. The message is no internet connection or limited connection (on all device, Iphone, computer, etc.). When I check to Ip configuration, the ip adress have change for loca 169.x.x.x. The only way to resolve is to reboot the access point. (POE).
It seem that access point don't relay information to rest of network. Strange.
The access point is connected to a simple unmanaged switch. This switch is connect to router and server. The serveur (Win2008) is the DHCP Server and DNS Server.
Can you help me to find a solution. ?

This may be the problem;
Devices: WAP discovers devices with ASSOC method that don't have an IP
CSCtz20891
Description
Symptom:
The OnPlus topology will show nodes with no IP address. Devices associated to WAP121/321 VAP/SSID not on the management VLAN will display topology nodes with with no IP address.
Conditions:
This occurs when the client associated to the WAP121/321 but is on a VLAN other than the management VLAN. In this case the WAP client information can be collected on the management VLAN, but the clients cannot be ARP/ping to validate.
Workaround:
None

Path-through authentication on WAP321 access point

Similar Messages

Maybe you are looking for