Path to download dbadashoplib.dll and R3loadada.pdb
When i start the sap kernel after upgrading the Kernal . it is giving me the message in sapcpe.log file that it could not find the following files
Please let me know the path to download the same
R3loadada.pdb
dbadashoplib.dll
Could you please tell me About your software details.
Is it SQL, 32BIT non-unicode?
The instancedb.LST file in the 175 Kernel is incomplete in 32BIT non-unicode.
155 is ok
--Sreejesh
Similar Messages
-
When I open iTunes I get an error message "MSVCR80.DLL missing". I downloaded this .dll and installed in C:\Windows|System32. I then scanned my computer to fix registry errors.I uninstalled iTunes and reinstalled and got the following error message "Apple Mobile Device failed to start".
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I'm trying to export a list to Excel and I'm getting this error: "unable to download owssvr.dll"
Hi,
Help, please.
I’m trying to export a list to Excel and I’m getting this error: "unable to download owssvr.dll"
Thanks in advanced.Hi,
According to your post, my understanding is that you got the error "unable to download owssvr.dll" when exporting a list to Excel.
owssvr.dll is the module given by Microsoft to read the data from SharePoint Lists using remote procedure call.
You can find the OWSSVR.DLL in SharePoint 2010 Server Physical Path: C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\ISAPI.
Please check whether it exists in SharePoint 2010 Server Physical Path.
Please check whether you export a list to Excel correctly.
Generally, the issue is caused by the brower. Please reset the IE to check whether it works.
In addition, you can repair the Office to check whether it works.
Here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/5f471d53-e980-4acc-a6cb-7c8722571ec0/problem-with-export-to-spreadsheet?forum=sharepointgenerallegacy
More information:
SharePoint RPC Protocols Examples Using OWSSVR.DLL
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
HT1926 can not download itunes due to not having msvcr80.dll and secerity reasons
can not download itunes due to not having msvcr80.dll and security reasons
Go to unintstall on computer remove these files in this order.
Remove itunes
applesoftware
apple mobile device support
bonjour and apple applied support
Re-install itunes
unclick "open in compatability mode"
It will work fine. Everything has worked for me after I learned this!! -
I hve lost my MSVCR80.dll and am not able to download itunes again
I have lost my MSVCR80.dll and am not able to open or download itunes. What are my options? I removed itunes thinking that i would start over and i am still encountering the same error message.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
when trying to correct itunes error it said to download it again,
and now it says my apple mobile privileges are not sufficient
i can't sync my phone or ipad
can you help correct all this?
i don't know what my phone is,Hello Patti
To fix your issue, follow the troubleshooting steps in the article below. It will walk you through removing iTunes and associated software and then reinstalling iTunes.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Regards,
-Norm G. -
I am unable to download iTunes on my second Windows 8 computer (64 bit). I got it fine on my first one and have used it quite a bit. After downloading the program and installing it on the second computer, I keep getting this error message: "Apple Mobile Device Failed to Start." This happens when when my IPhone 5c is connected via Wi-Fi and I have clicked on "Trust This Computer." (I have tried to install several times-- It gets hung up when it reaches"Starting Services.")
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2 -
Mozilla Unable to Locate verify.dll and crashes
I'm running Mozilla 1.7.11 on Windows NT. In the last few days, Mozilla will crash any time I visit a site that uses certain types of javascript. The error message that pops up before crashing has the title "mozilla.exe - Unable to Locate DLL" and reads " The dynamic link library verify.dll could not be found in the specified path", and then it proceeds to list several paths, including system folders, mozilla folders.
I haven't modified my computer's settings, and it seems to be free of spyware. Is there a particular Java download on this site that I should simply install and re-run to replace or update the verify.dll file? Or should I manually try to find the file online and upload it somewhere to my PC?Beats me. However, here is some ideas:
I suggest upgrading Mozilla to the latest version. It might automatically download the verify.dll file. If not, delete Mozilla and reinstall the lastest Mozilla version from scratch. If you reciently installed Microsoft Vista, it appears that the verify.dll may have been left out, therefore download verify.dll off the web and install it where it says, dont have to reinstall Mozilla. Good luck! -
How do I stop Win7 from breaking my software? Ole32.dll and "Power" service suspected culprits.
Hello and thanks for any help with this.
I built a new computer for my aunt and her one major request is that she still be able to use her card maker software Creatacard (yes misspelled just like that) by American Greetings. I thought this would be no issue, I could give her a much faster machine
and get her off (the no longer supported) WindowsXP all at the same time by moving her to Windows7 and copying all her files over from the old PC to the new one.
I tested the software first on a test PC of mine and found it would not install in a 64bit environment (error message saying use 32bit during install) which I solved by using Windows7 32bit. It worked perfectly so I proceeded to build her machine thinking
that issue resolved. Problem is after the new rig was built and SP1 plus all windows updates were installed the Creatacard software would not load. I get an instant popup message saying "Creatacard Application File has stopped working" with the options
to "Check online for a solution..." and "Close the Program."
Checking online does nothing noticeable and close program doesn't help as every time you reload it fails immediately with the same message. Clicking on the "view problem details" drop menu reveals that this is an APPCRASH with the following clues
Fault Module Name ole32.dll
Fault Module Version 6.1.7601.17514
I have researched and tried everything I could find online about this crash and none of it (up to and including completely re-installing Windows, systematically loading a few Win-updates and trying the app after each batch, editing the registry multiple
times, trying alt versions of ole32.dll, and using a Linux live CD to alter windows settings) has fixed the problem. I have learned the following though:
When windows is first installed the card maker software (CMS from here on) works fine.
After windows updates itself and a few device drivers auto load (like when you first plug in a USB mouse or Flash drive) CMS breaks.
Loading windows normally after it is up to date always causes CMS to crash and give the above message.
When I perform a "clean boot" CMS works fine once again.
When I boot into safe mode CMS works fine.
Someone online suggested a service could be the actual problem and there being 140 of them I used the 50% method to quickly narrow the list and found that yes indeed windows services do appear to be related because if I don't allow the "Power"
service to run the CMS works perfectly. With a bit of testing to see what it does I found that it controlled wake/sleep settings, delay until your monitor goes dark etc and that if the Power service is disabled it remembers the last settings entered and I
thought GREAT! Finally after many days of frustration and being balked by nonsense I have a solution. My aunt will never use/miss the power settings I will set them up for her once and then kill that service and all is well for a Happy Holiday... (from my
research online some may already guess where this is headed) until I went to play a video............ and there was no sound.
A little red X had appeared next to the speaker icon down in the system tray next to the clock and hovering over it gave a popup with "The Audio Service is not running." This is where the BS gets deep. I had of course NOT disabled the sound (Windows
Audio) service and a quick check showed it and all the services it depended on were in fact on and running. The Windows trouble shooter offered to fix the issue and so I let it run but it comes back with "one or more Audio service is not running"
and attempting to restart the service on its own came back with a "Not fixed" result. Now if I go to check dependencies for the "Power" it claims that no other services depend on it and it depends on nothing but that is an outright lie.
Further digging shows me the Power service's "path to executable" as... C:\Windows\system32\svchost.exe -k DcomLauncher and many other services show they depend on DcomLauncher to run.
Long extra trouble shooting session short here is where I am at. I can have the sound working or the CMS but not both.
Uninstalling and re-installing the sound card drivers didn't help (since sound is being stopped at the windows OS level) either.
As soon as I turn on the Power service and reboot the CMS breaks. As soon as I disable the Power service and reboot the CMS works perfectly but all audio breaks. Both of these are a deal breaker as she will not leave her old slow XP machine without her CMS
and I cannot give her a new machine that has no sound. Reboots take 30 seconds on this new PC so were it mine I could just live with it as the CMS has no sound and I don't need music playing when I am designing a Christmas card. Use the sound/power on 99%
of the time and disable them and reboot whenever I make a card and then enable and reboot when I am done. This would be over her head though I fear as she is a senior and not very tech savvy. My question then is...
Is there any way to have the CMS work while still keeping the Windows Audio service (and all the other not listed but still existing dependent services) running? Or alternatively is there something else I can do to the ole32.dll to make it stop the crash/error?
To be clear I would happily accept a system without the Power service running if (like it actually says under dependencies) nothing else other than the "Power Options" in Control Panel ceased to function.Thanks Michael. Apologies for the slow reply I was away for a bit (holiday blitz at work and visiting family madness etc.etc.) back now, I set both options you requested to "never " and retried the CMS software with no change.
I do have progress of a sort though, as a test I took a separate test PC and put a clean install of Win7 on and loaded up the CMS software (it worked perfectly) and then took the version of ole32.dll off that machine and put it onto the computer I had built
for her (using Linux) and...
got a new error code. Darn I was so sure I had found a clever solution this time lol.
Anyway now when the CMS fails it gives me a similar error but the offending module is "ntdll.dll" sooo... I tried taking the "working" version of ntdll.dll from the test box and moving it over (making sure to back up the existing ones
first so I could put them back if needed) to her new PC and the PC would not boot.
It seems to want the original versions of a few Dynamic Link Libraries and if I could somehow give it those while not breaking Win7 it should theoretically work seeing as it no longer errors with ole32.dll.
ntdll.dll however seems necessary for Win7 to boot.
So what I am wondering now is:
Is there some way to have both versions of the DLL file in the system32 folder (bypassing the "cannot have two files with the exact same name in the same folder" thing) or rename the original DLL's something else and somehow make the CMS look for
the new named versions so the system has the updated DLL's it needs to boot/run and the CMS has the old ones it wants to run or is there someway to have a self contained install of the CMS, say on a USB flash drive and give it it's own E:/windows/system32/needed
dll's path to the files it needs?
Willing to try any other options or settings you may have come up with as well.
Thanks again for your reply and my apologies for not answering sooner. -
Hi all,
I have several problems here, I tried to google but still I could not solve the problem.
Here are my questions:
1. I tried to download an example program of EPOS which require to download a DLL file into the RT, but it failed, here's the error (I attached the picture) 01/02/2008 13:29:50.511 [error] LabVIEW:
Failed to load shared library EposCmd.dll:_VCS_GetProtocolStackName@16:C on RT target device.
From the NI.com forum,
I found a similar problem and it said by installing Network Variable Engine and Variable Client Support into the LV-RT, and I did, but still failed. Any one can help me about this?
2. I posted a question also in lavag, I think this section is more appropriate. "I
am trying to use the digital IO of the motion controller of 7358, but then I realized the delay is more that 1 ms (I checked using the oscilloscope), I attached the code (MOMO = Must On Must Off). Is this real, I mean the hardware delay between on-off is as big as this? Anyone knows the solution for this?"
Note: I am using LV-RT 8.5, PXI-7358 Motion Controller, EPOS 70/10
Thank you for any help
Message Edited by bono02 on 01-02-2008 05:47 AM
Attachments:
maxon-rt3.JPG 120 KB
momo1.JPG 55 KBHello bono,
1. From what I have seen, this error is usually caused by one of two things. The first is the Shared Variable software components not being installed, which is covered in this Knowledgebase. The other is due to a corruption of the ni-rt.ini file on the Real-Time controller. You can follow the steps layed out in this Knowledgebase, which gives three possible remedies. You could also try reinstalling the software (firmware) or create a PXI Uninstall disk from Measurement & Automation Explorer by selecting Tools»Remote Systems»RT PXI Disk Utilities»Create PXI Uninstall Disk. Boot the PXI Controller from the PXI Uninstall Disk, which will erase the ni-rt.ini and ph_exec.exe on the target. However, you will need to reconfigure the controller after doing this.
2. Due to the nature of the digital I/O on motion controllers, it is not surprising that you are seeing around a 1ms delay. It deals with the fact that it must update the motion controller with the new value on each control loop. This Knowledgebase gives a little more clarification regarding the 7350 specs.
Carlton
CLD -
I was recently prompted to update my Itunes player to the latest version. I'm using Windows Vista. I was left with an error message MSVCR80.dll and consequently no new update. I uninstalled the old version and have tried to reinstall manually several times. No luck. Consequently I have no player.
Any ideas for a fix?Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Is there anyone who has used Freescale's SimpleSUB.dll and DEMOJM board?
Hello,
I am trying to connect Frescale DEMOJM board over USB connection. I am adding SimpleUSB.dll to my visual instrument thorough .NET constructor node and giving an mscorlib class GUID to the GUID property, than calling OpenConnection method from an invoke node referencing the SimpleUSB reference. But there is no valid connection to the device as DeviceConnected parameter return "False".
I am using LabVIEW 8.6 trial, .NET Framework 3.5. So they are up to date I guess. Is there a limitation of these for using .NET dll? And also I can use the dll in Visual C# successfully.
At first there was another problem using the .NET constructor node in LabVIEW because of Vista OS. The vi was blocking when i added the node to the vi. I changed the "language & regional settings" to English(USA). The problem seemed to be solved. Can Vista's bug be still a problem?
Is there anyone who has used Freescale's SimpleUSB.dll and DEMOJM board with LabVIEW?
I will be thankfull for your helps.
EmreHello Anna,
Here is one of my poor vi trials. I have also tried putting some conditionals in some other files but it didn't helped.
http://rapidshare.com/files/176194859/EXTDLL1.rar.html
Here is a link for the Freescale's DEMOJM board. It shows how to make a GUI for the board using SimpleUSB.dll & C#. You can also download the dll from that web page and there is helpfull documentation for the dll.
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=USBJM_TRAINING&nodeId=016246fNrgVJ4Cx...
I am trying to make the same thing with Labview instead of C#. But I am not familiar with the SW issues so am in trouble.
Thanks,
Emre -
A collection of FLV downloader, FLV player, and FLV converter for Mac
[http://www.pavtube.com/christmas2009/]
A collection of FLV downloader, FLV player, and FLV converter for Mac
Are you prepared to download FLV videos from YouTube, Google Video, metacafe, Yahoo! Video, Reuters.com, and many other video websites to play on your Mac or portable players, or do some further editing with certain editors? In my experience, assuming you have this idea, you must take advantage of three kinds of tools, including FLV downloader, FLV player, and FLV converter to achieve the goal.
Of course, I am not speaking this to depress you, but to share my collections of these tools to show my kindness. Sure, just for people who have these needs.
At first, I’ll introduce you several FLV downloaders for Mac, I have tried all of them, and basically they can achieve my goal of downloading FLV videos online.
Free FLV downloaders for Mac:
Web Video Downloader for Firefox
Free Video Downloader for Mac
Free YouTube Downloader for Mac
I also know some free FLV players, and recommend them to you here, hope they can assist you to play FLV videos on your Mac smoothly.
Free FLV player, Mac OS X:
Adobe Media Player
Wimpy FLV Player
QuickTime, after installation of the Perian video plugin
SWF & FLV Player
CorePlayer
(Tip: the above pieces of software can easily be searched in Google, so I do not give you the links here. I’m sure you can get them with ease.)
Well, we have gone through the FLV downloaders and FLV players in the above passages, now it’s time to introduce you a FLV converter for Mac. This program I recommend is Pavtube FLV Converter for Mac, which can perfectly convert FLV videos to a wide range of video formats, so that you can do whatever you like with the resulted videos, such as playing on your iPod, iPhone, BlackBerry, PSP, Apple TV, etc. or exporting to iMovie, Final Cut Pro and Final Cut Express to do further editing, or doing something else as you like. But how to use it? You may ask me. Take it easy, a step-by-step instruction is involved in the following part.
1. Download, install and run this program
A sky-blue interface will be shown to you as follow:
2. Add files, set output format and destination folder
Input FLV files to it by clicking button “Add”, and select a format as the output format in the drop-down list of “Format”, meanwhile, you can press “Browse” to specify the destination folder or just use the path set by default.
3. Set advanced settings
Click button[b] “Settings”, the following interface will pop up. You can change the parameters like screen size, bit rate, frame rate, sample rate, etc. to optimize the output videos.
4. Convert
This FLV Converter for mac can definitely complete the conversion at a swift speed with excellent quality, also it do not have the problem of audio-video out of sync. Therefore you need not worry about these issues. Moreover, if you want to add watermark as your own logo or reserve your copyright, you can totally do it with this program.
Ok, the introduction to the three kinds of tools which you may need while dealing with FLV videos is over, sincerely hope they can deliver you useful information, because you know, it’s my original intention.Hi Greg,
So if I understand correctly, your findings are:
Flash Player 10.1.85.3 + Flash Media Interactive Server = Jerky Video
Flash Player 10.0.x.x + Flash Media Interactive Server = Smooth Video
Flash Player 10.1.85.3 + Wowza = Smooth Video
And what about Flash Player 10.0.x.x + Wowza?
Also, if you could check the network traffic to confirm if it's Flash Player causing the issue or it is receiving it like that from FMIS.
Cheers
--Vikas -
How to set default file path while downloading alv output
Hi,
Can anyone tell me that how to set default file path while downloading the ALV output to system using Local file button on tool bar.
Please look below screenshots:
Kindly help me resolve it.
Thanks in advance.
Regards,
Ashutosh KataraThis information initial value is (maybe) stored in Windows Register (register.exe) at Software\SAP\SAPGUI Front\SAP Frontend Server\Filetransfer -> PathDownload, you can read it thru class CL_GUI_FRONTEND_SERVICES method GET_UPLOAD_DOWNLOAD_PATH and update it thru method REGISTRY_SET_VALUE. (Else there may be some parameter ID to force data, but I'm no longer sure)
Regards,
Raymond -
Illustrator CS6 64-bit dvaui.dll and msvcr100.dll crashing problem, any solution?
First things first, trying to find a tech support Email address or phone number has been infuriating. The "3-step support wizard" which results in "go to the forums" is also infuriating and insulting.
I have a Windows 7 64-bit PC running CS6 64-bit (updated/current), and it's crashing at random (2-3 times per day). I see events recorded in the event log showing dvaui.dll and msvcr100.dll as the source. Other people have raised this as an issue, and all I see are guesses. Does Adobe have a credible solution for this yet?
I've tried running as a domain admin, which did not help.
Illustrator CS6 32-bit seems to be working perfectly (4 days straight, no crashing).
It seems to currently affect only one computer (5 others are fine). It's not repeatable, and has no discernible cause.
Also, format and reinstall is neither a solution nor an option.
To be honest, I'm looking for Adobe to address this directly: do you know why this is happening, and how long until it is solved? If an Adobe tech support will open a case, I have a file that the designer (I'm not the designer) was using during one of the crashes. I don't know if the crashing will be related (to the file), but I have the file just in case.
David.Hi Larry,
Thank you for responding.
> CS6 is current in that it is still available for purchase and in the CC but it is now two versions behind.
I'm not quite sure what you are trying to say. Can you be explicit, please?
> As to your problem have you tried downloading the .dll files from Microsoft and reinstalling them?
I have copied and re-registered the DLL files from a known-good machine (that is to say that the machine doesn't exhibit any of the symptoms as the above machine), which did not help.
I'm really interested in having Adobe respond directly to this issue. I know they are aware of it.
It's clear that Adobe doesn't actually want to support this program, but people rely on it for their economic success. Both my client and his employees need this program to function properly and reliably, and I think anyone would agree that it's reasonable to expect that a problem like this (that affects more than just us) be, at a minimum, addressed. Adobe has my client's money, they had no problem accepting it. With that acceptance comes a duty to be responsive.
Thanks,
David.
Maybe you are looking for
-
How to connect video output from laptop to a TV
Hi All, We are in a major quandry. My wife purchased a Mac Book and we are supposed to do the slide show for my sister's wedding which is tomorrow (July 13th). We just got home and the "genius's" at the Apple store gave her the wrong cables. We need
-
Why can't i use my i tunes gift card for apps on my mac
i redeemd my itunes gift card and in the app store it says i have the money available but when i go to download an app it keeps asking me for credit card info
-
Now and then I can't open my windows in Photoshop at the right since yesterday
Since a short time I can't use my windows layers at the right of my screen like Layers etc. it's a kind of frozen, they won't open and they can't be moved?
-
Hi, I used to be able to publish an iPhoto album to my .Mac homepage with one click. Now, instead of setting up a page on my account, it will only publish my album to a web.mac.com page. How can I change this back?
-
Can we please hear from Management on the HTC EVO 4G LTE Status
I am starting this post as a hope to actually get some sort of status update on the HTC EVO 4G LTE release. I think I speak for the techno philes out there that are waiting for and pre ordered the device. Back on the 17th we were disappointed with