Paths panel Display text

I recently noticed a behavior difference between CS6 and CC that I don't really care for. I just want to point it out and see if may be there could be another option in the panel preferences to bring back the old behavior.
In CS6 when you designated a clipping path it would outline the path name in the panel for easy visibility. With a quick glance you could confirm that the path was active.
In CC it is just bolding the name and while it's still a visible difference it's not near as stark of a difference. And if it's the only path it's harder to confirm that the path is active.
Is it possible to put a preference option in the panel options to change this behavior? I deal with clipping paths on almost every image I do and quick confirmation of path activation makes my life a whole lot less chaotic.

no the path is highlighted in blue because i happened to have it actively selected. ie I clicked on it before I took the screen shot. That is not its default state when you open a file, the path would be grey background. I will update the screenshot if able.
I can not edit my original post...
And yes you are missing the subject of my question. I don't want to know which path is selected i want to be able to see if any path is an active clipping path.

Similar Messages

  • Af:commandImageLink not processing the aboulite path for displaying image

    All,
    We are required to display an image in the UI. The image is not stored in the deployed ear file. It is stored in the "*<DOMAIN_HOME>\Inventory\images*".
    Where DOMAIN_HOME=D:\JUPITER_CORONA\system11.1.1.3.37.56.60\DefaultDomain\inventory
    I would process an image absolute path in the af:commandImageLink tag as follows,
    *<af:commandImageLink "icon=file://D:/JUPITER_CORONA/system11.1.1.3.37.56.60/DefaultDomain/inventory/images/equipment.png" text"equipment" shotdesc="icon" />*
    The problem is that the above tag is not processing the above mentioned absolute path and displaying text "icon" instead of actual icon image. As per the ADF documentation the tag processes absolute path as well.
    Can someone suggest as to where I am going missing.
    regards,
    Chandra

    I was not able to get what you want very well, the situation is a little bit un-usual,
    but for solution I suggest the below way.
    write a servlet/JSP that return the image (it is like copying the file, read the image from absolute path and send it to the OUTPUTSTREAM of the response aslo remember the MIME and the write filter for the jsp/servlet that end with .jpg or any extension for the image.)
    then in the jsf page write the below code.
    <af:commandImageLink icon="/jspOrservlerpath/servlet/filename.jpg" text"equipment" shotdesc="icon" />
    your servlet (get the filename.jpg and then find the file and return it)
    this solution is very common for cases that the file is not available physically such as when you want to read it from another place(your case) or database.
    I hope this help you.
    I can send you the source for the servlet/jsp if you want.

  • Displaying text in GUI

    hey can someone please explain to me how I can display text in a GUI panel? I have a method which, when run, displays some values. How can I run this method in the panel?
    Thanks

    I want to be able to display the text so that the user cannot change the text.....is it possible to use JTextArea to display the text and make it so that the user cannot change the text thats displayed

  • Can a Multistate display text in lieu of a graphic

    I'm connecting to a N register in an Allen Bradley PLC through a symbolic link (Client-Server setup). I need to display different text messages based on the values 0, 1, 2, 4 of the N register (N7:5_0, N7:5_1, N7:5_2, N7:5_3 respectively) A Multistate would probably work but I need text and not graphics. What can I do other than make text graphics or how to write a text choose expression using values 0,1,2,4
    Thanks

    If you don't want to use an IF statement, you can just create several logical expressions, and use the text option.
    So, let's start off with creting a logical expression that displays text. I am sure we all can create an expression that will display the text.
    Go to menu item Insert/Expression, put in your address in the yellow box. Set the Display Type pulldown selector to Logical. We now get the Display Logical Signal dialog box. Select the bottom radio button next to Text. Here we can put text in our "on" state, and in our "off" state.
    However this is where the trick comes in. Select 'Background Style' Transparent. And only type in the text you want in the 'On' value. Click OK, you now have your object on the panel, however you might not be able to see it (it will be selected though). Make it the size you want, and position it where you want it. Now Shift Click and drag off the object, and put it right back on top. You now have 2 objects on top of each other, and they are the same, Change one of them to the new address, and change it's 'On' text value to be what you want it to say. You can keep doing this to build up your text messages on top of each other, and only the object that is 'On' will have it's text displayed. You need to be sure that only 1(one) of your addresses can be on at a time, or 2 messages will be showing up on top of each other. If you want to have a text plate around this object, to make it look better, create a blank text object, and set this down first, and then create your objects on top of it, Or you could create it last, and move it to the back. I would suggest that after you get it looking the way you want, you 'Group' it so it 'holds' together for easy movement.
    Hope this helps,
    Rich Anderson
    Green Bay, WI

  • Adobe Reader displays text incorrectly as a thin grainy font

    Adobe Reader displays text incorrectly as a thin grainy font. How do I fix it?

    I think I counted three tabbed panels in the markup, each with an ID of TabbedPanels1
    You have only one constructor that makes one instance of the tabeed panels with an ID of TabbedPanels1
    There are a couple of things that create the problem.
    There can only be one ID with the same name in a document, thus the ID's of the TabbedPanels will need to change from TabbedPanels1 for the second and third instances to TabbedPanels2 and TabbedPanels3 (or similar) respectively.
    There needs to be a constructor for each tabbed panels like
    var TabbedPanels1 = new Spry.Widget.TabbedPanels("TabbedPanels1");
    var TabbedPanels2 = new Spry.Widget.TabbedPanels("TabbedPanels2");
    var TabbedPanels3 = new Spry.Widget.TabbedPanels("TabbedPanels3");
    Gramps

  • Displaying text

    How can I display text directly on screen, so making no use of JPane, Panels, Windows...?
    thx in advance

    One way would be to use graphics:
    g.setFont(font);
    g.setColor(Color.blue);
    g.drawString("Text message", 100, 230);

  • HP LaserJet Enterprise 500 color MFP M575 control panel display

    HP LaserJet 500 color MFP M575  have no Display. and is not anymore possible access any function. What is the problem behind that ?How can we solve this issue ? is it the problem with the control panel display or the logic board ? there is no dim memmory instaled in the system . 

    Good day,
    To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums.
    Enjoy your day!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Mac Mini to G4 iMac Flat Panel display ???

    Just scanned some pages back in this forum and couldn't see this as a topic-so I'll ask.
    I was wondering, if I had a 17" Flat Panel imac (even the 800Ghz version, or the 1Ghz or the !.25Ghz - or event the 20" [yummmmy] ) could I drive the mac mini via the iMacG4's highly versatile flat panel display ???
    [ideally I'd love to be able to re-engineer the Flat Panel's guts with smaller but faster CPU etc - and as machine innards get smaller maybe this will be possible - because the screen tilt and swivel is so versatile; eh!)]
    gregg

    Hmm - why did myinnermostthoughts sudenly become a hyperlink - or is it a hyperjump into the final frontier of cyber-computing???
    Anyway, but I had hoped to just plug a keyboard into 2005 'Twiggy" , use a VGA adaptor/er between the two machines, and use the 1.42 Ghz speed of the 'Twiggy' to display stuff (CS2 etc) on the Flat Panel's display (oxymoronic word usage here - I suppose). The Flat Panels do have an vga port - so why cant the cable go from the mac mini to the VGA port of the iMac ??? Are you saying ti's almost impossible - or are you refering to re-engineering???
    Gregg

  • Is it possible to use old Apple Flat Panel Display (62 watt power adapter) with MacBookPro 13" Mid-2012 running 10.8.4? Tried mini display to VGA cable

    Is it possible to use old Apple Flat Panel Display (62 watt power adapter) with a MacBookPro 13" Mid-2012 laptop?  Would like to use larger screen when working at home.  I have a mini display port to VGA cable and have tried to hook up the old display but it seems not to work.  When I try to activate the screen on the old display-- a window comes up in the MacBookPro and asks me if I want to shut down the computer.  What little I have read it that the MacBookPro had Thunderbolt and the old display may not be compatible?  Any assistance would be appreciated.

    quax88 wrote:
    11.09.12 22:16:06,148 ClamXavSentry[286]: scan email files
    11.09.12 22:16:06,148 ClamXavSentry[286]: I will quarantine infected files
    This doesn't have anything to do with your problem, but it will likely cause other issues with your e-mail.
    Here's my standard recommendation concerting the use of A-V software to deal with potentially infected messages:
    Never use ClamXav (or any other A-V software) to move (quarantine) or delete e-mail. It will corrupt the mailbox index which could cause loss of other e-mail and other issues with functions such as searching. It may also leave the original e-mail on your ISP's e-mail server and will be re-downloaded to your hard drive the next time you check for new mail.
    So, if you choose to "Scan e-mail content for malware and phishing" in the General Preferences, make sure you do not elect to either Quarantine or Delete infected files.
    When possibly infected e-mail files are found:
    Right-click/Control-click on either the infection or file name in the ClamXav window.
    Select "Reveal In Finder" from the pop-up menu.
    When the window opens, double-click on the file to open the message in your e-mail client application.
    Read the message and if you agree that it is junk/spam/phishing then use the e-mail client's delete button to delete it (this is especially important when the word "Heuristics" appears in the infection name).
    If you disagree and choose to retain the message, return to ClamXav and choose "Exclude From Future Scans" from the pop-up menu.
    If this is a g-mail account and those messages continue to show up after you have deleted them in the above manner, you may need to log in to webmail using your browser, go to the "All Mail" folder, find the message(s) and use the delete button there to permanently delete them from the server.
    To fix the corrupted mailbox index(es), highlight each one that was corrupted and choose Rebuild from the appropriate menu.

  • I am trying to use motion tracking to have text follow a section of the background.The text box follows the motion path, but the text just sits there.  What am I doing wrong?

    I am trying to use motion tracking to have text follow a section of the background.The text box follows the motion path, but the text just sits there.  What am I doing wrong?

    Motion basically looks at the the source footage and it's timing (in the timing section of the Inspector) when analyzing for tracking.  Filters are basically ignored by the tracker.  Retiming actions, like time re-mapping, or retiming behaviors that are applied before the tracker should be used by the tracker.  Did you change the timing after doing the tracking?  If so this would also require you to re-track the shot.  Understanding that you found a workaround, describing the effects you applied would help to explain why you ran into problems.
    Cheers!

  • Displaying text more than 256 in ALV report

    Hi experts,
                     I have problem while displaying text field in ALV report which has more than 256 characters.
    I'm using CL_SALV_TABLE for displaying alv.while concatenating my internal table holding all the text.but at the time of displying the report it's only displaying 256 characters.
               Can anyone guide me how to display more than 256 characters in ALV output using CL_SALV_TABLE.

    Hi,
    Please find the below code.
    TRY.
          gr_column ?= gr_columns->get_column( columnname = 'MATNR' ).
          gr_column->set_output_length( '300' ).
        CATCH cx_salv_not_found.
        Message : Column definition problem
          MESSAGE e075().
      ENDTRY.
    Edited by: Archana.T on Jun 16, 2010 1:24 PM

  • How to display text on last but one page in SAPSCRIPTS

    how to display text on last but one page in SAPSCRIPTS

    u have create one Foooter window , this has to be called in  only One Page.So hardcode /assign this window to only one PAGE number.
    regards
    Prabhu

  • When I click on - View - Page Source, I want to edit with NotePad - note just display text in fancy colors

    I like to edit my web pages easily,
    - click to see html, edit it, (file name already there), save it
    - hit restore on browser - see what I did -
    Just changed from IE
    which gave me NotePad, which is just fine for me
    Just changed to FireFox
    and it displays text in a non-editor,
    can't edit and save easily
    What to do??
    Even worst - after installing FireFox
    IE no longer clicks to NotePad
    but that fancy non-editor :-(((

    ViewSourceWith: https://addons.mozilla.org/firefox/addon/394
    See also:
    http://kb.mozillazine.org/view_source.editor.external
    http://kb.mozillazine.org/view_source.editor.path

  • Display Text in a query as a symbol

    Hi everyone,
    I have a query (BI 7) that displays runtimes of BI applications (generated from technical content -0TCT_MC01 multiprovider).
    In the rows there is 0TCTBIOTYPE (type of BI application) which usually displays texts as below:
    query
    Web Template
    I would like to show in the report the symbol (image) instead of the key/text of this infoobject.
    Any idea?

    Hi Reuvel,
    Nice requirement.
    Not sure 100% but from my memory i guess we can display the image for characteristic, instead of text or key by using Analysis web item Using parameter modification in WAD .
    Kindly check for Modifcation parameter Display image Module (com.sap.ip.bi.*.Documentcontent) in WAD, it might solve your purpose.
    Regards,
    Ashish

  • HP LaserJet M1120n Multifunction Printer, control panel display

    Hi,
    Yesterday here was an electrisity cut. After that all devices worked normally, except the printer. Control panel display of the printer was out of function and control panel buttons  didn't work.
    I turned  the printer off and waited some time. After that I tried to restart the printer. I heard that the printer started, but the display didn't work though, even I waited couple of hours . How could I solve this problem and can you help me?
    BR Vesa

    Hi @Vesa57 ,
    I see that the display isn't working on the printer since you had a power outage. I will certainly do my best to help you.
    Can you still print to the printer?
    Make sure there is no damage on the power cord and that it is connected directly to a wall outlet.
    The printer shouldn't be exposed to any electric or magnetic field.
    Try another power cord, you can use a monitor power cord to test it. Just to rule that out.
    I would do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 30-60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    Try another wall outlet in another room, on another breaker. Just to make sure that isn't causing the issue.
    Please call our technical support at 800-474-6836 if the issue continues. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

Maybe you are looking for