Patitioning My Harddrive after Windows
I partitioned my hard drive through BootCamp to install Windows OS. But I put it on the wrong partition. So once I installed Windows on my MAC OS hard drive, I just reinstalled MAC OS on the 30gb partition. I now have a 30 gb partition and a 40gb of free space and 1200mb for Windows. My hard drive access space has run out. On my Mac OS I can't access the other 40gb on the MAC OS. When I use disk utilty to change it. It won't allow me to partition or do anything to my hard drive. I erased everything on the 1200mb hard drive but I still can't partition my hard drive. What can I do? I tried going back through BOOTCAMP but it only says "The setup disk cannot be partitioned or restored to a single partition." and will not allow me to use it. Please help, I just got my MAC Book as a graduation present and I am afriad I have already messed it up! Please help! Thanks!
Are you using disk utility from the original disk that came with your MacBook?
Try booting from the osx disk and looking under utilities. You can then partition the drive from there. Be sure to use the GUID choice for the main partition so it will be bootable for OSX.
Mort
Similar Messages
-
Black screen after windows auto update
New laptop in use for 3 weeks. After Windows auto update restart I get to splash screen and am able to enter Windows password to log onto desktop. After successfully entering password I am not able to view my desktop; I get the black screen with cursor function; cursor disappears when moved within an inch of left or right of screen (seems to go behind something). I believe I am at the desktop but just not able to view it, because I receive app popups on the black screen (need to update McAfee, etc).
In safe mode I restored to pre auto update date; manually installed all Windows updates; worked fine until NEXT auto update, same problem.
Graphics Card: Stock Intel HD Graphics
Monitor: Generic PnP
Why would it be fine with the manual update and not after auto update?
I do not have an external monitor to attach this laptop for diagnosis. I have run windows partition checks and hard drive partition checks with no issues to resolve.
I did get an error message once when running a diagnosis (can't remember which) : Windows Update Error 0x80070490
No real luck finding anyway for me (the average Joe) to resolve this issue.
If this is a harddrive issue I don't want to keep pussyfooting around while my warranty window shrinks.
I have downloaded driver updates from HP, but cannot get the Synaptics Touchpad driver to download. I don't think this is my issue though.
I am going to manually update all my drivers then manually update Windows. We will see what happens on the next auto update.
Please advise if this is an issue I need to just give up on and return this laptop for replacement. It seems like this is not a completely unheard of issue, but I'm shocked at what we are asked to do to attempt to resolve it. Out of my depth.Hi @Justanothermom
Welcome to the HP Support Forums!
I understand that you are having troubles with a black screen after an update. I am happy to help you with this.
Firstly, there is nothing wrong with modifiying your update settings. I was going to suggest it myself as I read through your post, and then saw you ask the question. Sometimes updates can have unintended results by the creator. With all the different combinations of hardware, and the fact that updates come from different sources, it is one of those things that is hard to completely control.
Please see the following for how to make adjustments to your update settings.
Turn automatic updating on or off - windows.microsoft.com
Or if you know which update seems to be causing the issue you can take a look at this page:
win 8.1 August 12 updates - black screen after 2nd reboot - answers.microsoft.com
Let me know if this helps at all.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping! -
XE service lost after windows server 2003 restart - must start repair
I have a problem with Oracle XE 10g on Windows 2003 SP2.
Installation went fine, I could use database, go to home page, add tables, views, functions etc.., link database to sql server and query tables from several sql several sql servers on the network etc.
In general everything was fine, but...
After windows 2003 restart XE service does not start, db home page is not accessible and
lsnrctl stat
is giving me:
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 25-RUJ-2009 22:46
:26
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(OVO NE RADI) (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR
_XE))(ADDRESS=(PROTOCOL=TCP)(HOST=sql-server-test.ie.local)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 25-RUJ-2009 22:45:56
Uptime 0 days 0 hr. 0 min. 30 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\l
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sql-server-test.ie.local)(PORT=1521)
)(OVO NE RADI) (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
There is no sign of XE, XEXBD nor XE_XPT service.
I restarted installation and performed repair and everything went back to normal.
After repair
lsnrctl stat
is giving
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 25-RUJ-2009 23:11
:40
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(OVO NE RADI) (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR
_XE))(ADDRESS=(PROTOCOL=TCP)(HOST=sql-server-test.ie.local)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 25-RUJ-2009 22:45:56
Uptime 0 days 0 hr. 25 min. 44 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\l
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sql-server-test.ie.local)(PORT=1521)
)(OVO NE RADI) (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=
HTTP)(Session=RAW))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "xe" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
The command completed successfully
After repair all is good but I must not restart server.
If I do this the story repeats itself.
No XE, XEXBD etc services, no access to database nor to homepage.
Starting install/repair - everything works. After restart same story again....
I could not find the way to aviod constant repair after restart.
Is there any way out of this?Thank you for the response.
But the problem persist.
The lsnrctl dont recognise the XE service. The OracleServiceXE is up and running.
D:\oraclexe>lsnrctl services
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 12-OCT-2009 12:55
:48
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully
listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = D:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST =localhost)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
tnsnames.ora
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
XE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST =localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = XE)
(SRVR = DEDICATED)
) -
Satellite A300D-15B - Webcam won't work after Windows 7 upgrade
My webcam doesnt work after Windows 7 upgrade. I have installed the drivers but still having no luck
Hi
The webcam is listed in device manager under the Imaging devices
There you should see USB Video Device.
If its not listed there, then I think that the device malfunctions or its disconnected.
The webcam is an usb device and its connected to USB controller.
I read in different threads that in some cases the cable could be loose and therefore the webcam would not be listed in device manager.
I such case the display lid needs to be disassembled and the cables should be checked.
In my opinion its a job for an technician. -
Dell Latitude E6520 fails to boot after Windows Updates
Hello,
I have a Dell Latitude E6520 that is not starting up after Windows updates. It installs updates and requests a reboot, after which it blue screens at the splash logo and reboots again. This goes on indefinitely. The only way to repair it is to boot from
a recovery disk and run:
dism /image:D:\ /cleanup-image /revertpendingactions
This is after running dism /image:D:\ /get-packages and noticing that several updates are still in an "Install_Pending" state. These are the kb's that are pending:
kb2982378
kb2978742
kb2977629
kb2976897
kb2973112
kb2972211
There were other updates, but those showed as installed. I would post the WindowsUpdate.Log, but I do not see a button to attach a file and the log is very long. Here is what I think is relevant towards the end of the log:
2014-09-18 10:52:04:214
496 540
AU Install complete for all calls, reboot needed
2014-09-18 10:52:04:216
496 540
AU Successfully wrote event for AU health state:0
2014-09-18 10:52:04:623
496 8a4
AU UpdateDownloadProperties: 0 download(s) are still in progress.
2014-09-18 10:52:04:623
496 8a4
AU Triggering Offline detection (non-interactive)
2014-09-18 10:52:04:623
496 8a4
AU AU setting pending client directive to 'Reboot Pending'
2014-09-18 10:52:04:623
496 8a4
AU Changing existing AU client directive from 'Progress Ux' to 'Reboot Pending', session id = 0x1
2014-09-18 10:52:04:625
496 8a4
AU Successfully wrote event for AU health state:0
2014-09-18 10:52:04:625
496 1668
AU #############
2014-09-18 10:52:04:625
496 1668
AU ## START ## AU: Search for updates
2014-09-18 10:52:04:625
496 1668
AU #########
2014-09-18 10:52:04:626
496 1668
AU <<## SUBMITTED ## AU: Search for updates [CallId = {7C1069F1-2D57-421E-A378-38DE401BF9F1}]
2014-09-18 10:52:04:626
496 166c
Agent *************
2014-09-18 10:52:04:626
496 166c
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-09-18 10:52:04:626
496 166c
Agent *********
2014-09-18 10:52:04:626
496 166c
Agent * Online = No; Ignore download priority = No
2014-09-18 10:52:04:626
496 166c
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-09-18 10:52:04:626
496 166c
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-09-18 10:52:04:626
496 166c
Agent * Search Scope = {Machine}
2014-09-18 10:52:05:210
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:07:170
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:09:475
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:09:569
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:11:590
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:14:999
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:16:887
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:18:753
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:19:623
496 1668
Misc WARNING: IsSessionNonstandardUI: session 65536 is an unknown session type 0; treating it as a standard session
2014-09-18 10:52:20:673
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:22:573
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:22:773
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:24:464
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:24:651
496 1668
AU AU received handle event
2014-09-18 10:52:26:366
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:27:520
496 1668
Shutdwn user declined update at shutdown
2014-09-18 10:52:27:520
496 1668
AU Successfully wrote event for AU health state:0
2014-09-18 10:52:27:520
496 1668
AU AU initiates service shutdown
2014-09-18 10:52:27:520
496 1668
AU ########### AU: Uninitializing Automatic Updates ###########
2014-09-18 10:52:28:206
496 166c
Agent * WARNING: Exit code = 0x8024000B
2014-09-18 10:52:28:206
496 166c
Agent *********
2014-09-18 10:52:28:206
496 166c
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-09-18 10:52:28:206
496 166c
Agent *************
2014-09-18 10:52:28:206
496 166c
Agent WARNING: WU client failed Searching for update with error 0x8024000b
2014-09-18 10:52:28:253
496 1668
Report REPORT EVENT: {62FF14E3-DDBE-4DDC-BE90-12B98EC74605}
2014-09-18 10:52:04:216-0600 1
193 102
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Content Install
Restart Required: To complete the installation of the following updates, the computer must be restarted. Until this computer has been restarted, Windows cannot search for or download new updates: - Security Update for Windows 7 for x64-based Systems
(KB2982378) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2973112) - Security Update for Windows 7 for x64-based Systems (KB2976897) - Security Update for Windows 7 for x64-based Systems
(KB2918614) - Cumulative Security Update for Internet Explorer 9 for Windows 7 for x64-based Systems (KB2977629) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2972211) - Security Update
for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2937610) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2894844) - Security Update
for Windows 7 for x64-based Systems (KB2978742)
2014-09-18 10:52:28:253
496 1668
Report CWERReporter finishing event handling. (00000000)
2014-09-18 10:52:28:253
496 1668
Report CWERReporter finishing event handling. (00000000)
2014-09-18 10:52:28:425
496 1668
Service *********
2014-09-18 10:52:28:425
496 1668
Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-09-18 10:52:28:425
496 1668
Service *************
Please let me know if there is a better way of attaching the log to this post and thank you in advance for any help.Hi ChristianBoman,
We could use the OneDrive to upload the log and then paste the shared link here. For more information, please refer to the following article.
http://windows.microsoft.com/en-us/onedrive/share-file-folder
for the update error 0x8024000b, please refer to the following article.
http://windows.microsoft.com/en-us/windows/windows-update-error-8024000b#1TC=windows-7
Please take the following steps:
1. Run the Windows Update Troubleshooter.
2. Click the Start button , type Run in the search box, and then, in the results list, click Run.
3. Copy the following text, and then paste it into the Run text box:
Cmd /c ren %systemroot%\System32\Spupdsvc.exe Spupdsvc.old
4. Click OK.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support -
Hi,
I am new to SP 2010. I have installed Share point 2010 server (trial version) on my Windows 7 Home Premium Laptop by following the below link.
http://msdn.microsoft.com/en-us/library/ee554869%28office.14%29.aspx
Everything went fine and was able to see the new sharepoint site after completing configuration wizard. SP2010 Central Admin also worked fine.
However, after windows update, sharepoint site is not working. I was able to see the site working for more than a day before windows update. SP2010 Central Admin is still working. Executed "PSCONFIG" after
update but still no good.
I saw a warning "The Security Token Service is not available" in Central Admin and did some research to fix the issue but nothing worked.
Hotfix
I believe I have all hotfixes mentioned in the forums. Here is the list.
Windows6.1-KB976462-v2-x64
Windows6.1-KB982307-x64
Synchronization
Windows6.1-KB974405-x64
MSChart
SQLSERVER2008_ASADOMD10
381569_intl_x64_zip
Windows6.1-KB976462-v2-x64
Event Viewer
I can see following log in Event Viewer when accessing site home page.
Event ID: 8306
Task Category: Claims Authentication
Level: Error
Website response
http://localhost:32843/ - "HTTP Error 503. The service is unavailable."
http://localhost:32843/Topology/Topology.svc - Works fine
http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc - Returns following error. I am unable to see windows authentication in both Windows Features (under IIS -> WWW services -> Security) and IIS website (SharePoint Web Services
-> IIS -> Authentication).
HTTP Error 500.0 - Internal Server Error
Module "WindowsAuthenticationModule" could not be found
I even tried to uninstall Sharepoint and re-install the same. It worked even second time until it went thro' windows update. App pools are running and Websites are up and running in IIS.
Can anyone please help me to fix this issue?
ThanksHi Henrik,
Here is the log info.
<EventID>8306</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>47</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<Execution ProcessID="8436" ThreadID="8812" />
<Channel>Application</Channel>
<Security UserID="S-1-5-20" />
The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024
bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>IIS 7.5 Detailed Error - 500.0 - Internal
Server Error</title> <style type="text/css"> <!-- body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;} code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;} .config_source code{font-size:.8em;color:#000000;}
pre{margin:0;font-size:1.4em;word-wrap:break-word;} ul,ol{margin:10px 0 10px 40px;} ul.first,ol.first{margin-top:5px;} fieldset{padding:0 15px 10px 15px;} .summary-container fieldset{padding-bottom:5px;margin-top:4px;} legend.no-expand-all{padding:2px 15px
4px 10px;margin:0 0 0 -12px;} legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px; border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696; border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;f'.
I would like to let you know that I am getting following message when accessing the below link. I am unable to see windows authentication in both Windows Features (under IIS -> WWW services -> Security)
and IIS website (SharePoint Web Services -> IIS -> Authentication).
http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc
HTTP Error 500.0 - Internal Server Error
Module "WindowsAuthenticationModule" could not be found
Regards -
Ipod touch 5th gen will not sync after windows 8.1 update
ipod touch 5th gen will not sync after windows 8.1 update. Computer see's Itouch as mass storage and charges. Worked with Window's 8 fine, as soon as update was done and restarted computer Itouch doesn't show up. Itouch seen on two other computers.
See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem? -
My iPod will not connect to itunes after windows 8.1 download
My iPOD will not connect to itunes after windows 8.1 download
I already uninstall itunes and made sure there were no file left before I installed again (it didn't appear to be any files left but music I had on it before was still there when I reinstall it)
My ipod does work on my old computer and it was working on windows 8 before I update to 8.1
I don't want to installed again because I just did that and didn't work!
I want to use my iPod on this computer and system. Can this be fix?Hey TheBurntApple,
Thanks for the question. I understand that you are experiencing issues with your iPhone connecting to iTunes for Windows. While you may have already attempted most of the steps in this article, I wished to provide it to you just in case something was omitted.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M. -
My laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade,
my laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade, driver on your website fails to setup at 83 % with an error message
Welcome to the HP Forums MillaMagia,
I see by your post that the USB isn't being recognized.
I can help you with this issue.
Are you using the same USB cable? (known good USB cable)
You want to use the normal USB slot 2.0 cable and not the latest USB 3.0.
USB 3.0 are supposed to be backwards compatible.
Try another USB port on the Laptop, some of the USB ports are more powered then others.
I have provided a document to see if the printer is partially recognized in the device manager, which is causing the printer not to be recognized again. (the uninstall from the CD should have removed the entry and the printer from the registry)
Leave the printer turned on and the USB cable connected directly to the computer and the printer's power cord directly into a wall outlet.
How do I get into Windows Device Manager?
Here is a document for Identifying problems in Windows Device Manager.
Check to see if there are any hardware driver conflicts, you might see a ! mark or a red x beside a device with a conflict or unknown device, look under universal serial bus controllers, look for USB printing support or mass storage device, delete the entry by right clicking and select uninstall, OK.
Let me know how it was listed. (screen shots welcome)
If this is a Laptop then check the power management settings.
Access the device manager. Windows 8-How do I access the Device Manager.
Select universal serial bus controllers from the list, for each USB root hub, right click and left click on properties, for power management remove the check mark for "Allow the computer to turn off this device to save power". It allows the computer to limit or turn off power for this device.
Disconnect the USB, run the full uninstall and reinstall the printer software again.
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Problems with Twist Before and after Windows 8.1 Upgrade
I'm not sure if this is a problem on Windows' end or Lenovo's, but here it goes. Problems AFTER Windows 8.1 update:
1.) When I close the computer, even though the power management settings are set to put the computer to sleep, it only goes to sleep about 50% of the time. If I don't catch it, that means the battery will drain completely while I'm under the impression it's sleeping. The kicker is, even if I do catch it, I can't get the computer to turn back on. The screen stays black until I hold the power button down and force the computer to turn off and restart it.
2.) iTunes will not open. I don't get any numbered error message, just a message that it failed. I've tried running iTunes in compatibility mode, and I've uninstalled and reinstalled it, to no avail.
Problems BEFORE:
1.) When I first got the computer, it was super quiet. Now the fan is pretty loud and buzzy. It seems that it may even be brushing something, because if I push the bottom up ever so gently, the sound goes down by half. Not a huge issue, but especially noticeable when I'm in tablet mode.
I know that at least the last one isn't a unique problem. I can kind of live with that, but the first two are really driving me nuts.I made the mistake of loading W8.1 on my Twist without realizing how raw and bug prone the preview really could be. The backout would require reloading a lot of applications, and this is not my primary PC, so I am toughing it out. Saw updates load. Current build is 9431.
I am currently uninstalling software and updates until I get a stable environment again. Here is some general feedback...
I have not had an issue with the Lenovo System Update running. I suggest you do ONE update at a time.
50% of the shutdown/reboots fail and I need to hard power off with the power button
Manually loading the latest Intel video driver software caused MAJOR problems. Many programs simply did not run and everything was locking up. Backing that out motivated me to remove other stuff. The Lenovo System Update is offering to install a driver which I will attempt after all other firmware and drivers are updated.
I use the Classic Shell v3.6.8 on the desktop. I thought the 8.1 would return the start button, but I assume that Classic Shell is overriding that.
Like others, I have had trouble getting the Juniper VPN software to load and work. Trying to back everything out, but the virtual juniper nic is still showing up in the device manager.
I am usually a reader of discussion forums and not a poster. I will do my best to post my resolutions as well as issues. -
Hi
Anyone knows whether Windows 2008 R2 domain controllers with Windows 2003 forest functional level will still be Supported after Windows 2003 support ends in July 2015 ?
ThanksWhen Windows Server 2003 support ends, you should not have a Windows Server 2003 Domain Controller running if you would like to be supported by Microsoft. This means that there will be no reason to have a DFL or FFL that is lower than Windows Server 2008.
So, if you are keeping Windows Server 2003 FFL to keep DCs running Windows Server 2003 then this is not supported.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
EFI Problem after windows 8.1 installation
Hello,
I already made thread about this issue to macrumors, but yet I haven't found a solution. So after windows installation I have now two windows entries at EFI.
My computer is 15" late 2013 rMBP.
In this thread I have been described the problem:
http://forums.macrumors.com/showthread.php?t=1669664Re-installing windows solved the problem. Now I am good to go
-
My laptop become blue screen after windows logo, after i update the graphic ati and intel driver
I have constant blue screen after windows logo and i have updated all drivers. i was upset the blue screen didn't go away and i did the factory reset. For my suprise, it didn't solve the problem and then i repair it at the comp shop. it was installed with windows 7 home premium 64 (pavilion g4 1006tx) bit as the pre installed windows and activated with the key back on sticker. I updated all drivers and i noticed every time i update the ati and intel driver it will go blue screen after windows logo. after i uninstall it at in safe mode it can load normally. My question is there any solution for my graphic card or is it already damaged? or any other hardware problem? please because i have to use high graphic as i use photoshop
hii
make sure you download and update correct driver version of graphic
and know spec
more:
http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g4-Notebook-PC-series/5046252/model/5068...
try to instal "AMD High-Definition Graphics Driver" only
and uninstal "Intel High-Definition (HD) Graphics Driver"
Wisnu Suryandi -
After Windows 7 Kernel crash, I cannot start Photoshop CC any longer.
After Windows 7 Kernel crash and Windows Reboot, I cannot start Photoshop CC any longer. After Photoshop start, Photoshop terminates itsself with a general error messages. I tried to reinstall CC, without deleting the application settings, but didn't help. I thing the application settings must be changed or reset ?
Thanks in advance
Best regards.Still searching for any Launch log on my PC that give me some more details about the launch error....any idea where ?
-
I just upgraded my macbook pro to mountain lion. Now I want to install windows, but during installation using bootcamp, it says windows can't install on FAT partition. I couldn't change it to NTFS. Also how can I partition my hard disk after windows installation. Coz before windows installation, if I partition hard disk, it won't allow me to install windows saying startup disk can't be partitioned.......help would be appreciated.
Thanksbkchoo wrote:
Now, I wish to upgrade from Mountain Lion 10.8.5 to latest version of OS X Yosemite, but I am in doubt and worry if after upgraded to Yosemite, can I still using my Windows XP where I installed now in Mountain Lion 10.8.5 BootCamp?
Yosemite does not allow a new installation of XP, but an existing XP installation is self-contained and will continue to work. Does your XP installation use a FAT partition? You may be better off using NTFS and then upgrading to Yosemite.
Will the Yosemite upgrade process delete my Windows XP partition or crash my current BootCamp? Can I still have an option to load OS X or Windows XP (press 'alt/option' key during boot up) after upgraded to Yosemite?
If you have made any re-sizing attempts to WXP partition Yosemite will cause problems, otherwise the Yosemite upgrade leaves XP untouched.
Are there any specific reasons to upgrade to Yosemite?
Maybe you are looking for
-
How can I remove a cough from the audio?
I have a .MOV source file that I'm editing in PrE10. At one point there is a cough that happens over what the speaker is saying. Is there any way to remove just the cough sound? If not with PrE, then what program could I use? Guessing this will be di
-
I purchased and own photoshop elements 11 and have a serial number how can I download it provide me with steps
-
How do I get iTunes to show the file path for music
I am trying to get iTunes to show me where songs are located on my computer, Hoiw do I get this to show up in iTunes? Thank you
-
Options for reading dynamic NTFS drive in OS 10.5
Hi, Long story short, I have a dynamic NTFS formatted drive which I need to read with a Macbook. I am studying abroad and have no access to the computer which I pulled the drive from. I am open to any option which would allow me to access the content
-
I tried to create a calendar entry today for a John Smith. But siri refused until I told her which of the 25 "johns" I have in my address book is the right one. Trouble is John Smith isn't in my address book and never will be! Its a one off appointme