Patriot Valkyrie 2-Bay drive to Macbook

I recently purchased a Patriot Valkyrie 2 bay NAS drive which says it's compatible with Mac. It's connected to a d-link switch and a WRT300N Linksys router.
On the network the Mac can see the NAS drive, however, it has trouble connecting to it. I am curious if this is a problem with the NAS drive or the switch or both! The NAS is intended for storage and I have formatted a one drive so far ext3.
Both a windows and linux machine could connect to the drive. But if I transfer files from one of those machines to the NAS drive the connection drops and fails. The result occurs via wifi and hard wire. Hopefully someone can help me. Thanks!

Have you had trouble with your router or switch (you have both?) prior to this?
10.6.3 included one of those famous Apple "improved support and compatibility" for Safari and Linksys, not sure why.
OS X Networking forum:
http://discussions.apple.com/forum.jspa?forumID=1343
The fact it has trouble with other operating system and platforms would tell me you have a hardware compatibility problem.
Did you check reviews online sites like Amazon, Newegg and others? 10.6 and 10.6.3 may not have been tested. For more, you could look at a linux server and NAS, or HP MediaServer NAS using WHS even. Or Netgear equipment (what I use end to end).
The most you can hope for is probably firmware update for Linksys and DLink.

Similar Messages

  • I opened my Mac to upgrade it and broke something near the optical bay drive. I don't have apple care, can I bring it to geek squad? Or will Apple fix it? How much?

    HELP! I broke something in my MacBook Pro by opening it up and trying to upgrade my optical bay drive to an SSD and my RAM and broke a cable near the optical bay drive. I bought it from best buy and my step dad was too stubborn when we first purchased it to buy best buy care or the apple care. Will Apple fix it? Will geek squad fix it? How much would it cost? Also my battery is starting to give out before this. I have taken the cable out that connects the battery to the motherboard and that worked, but how much would that cost to? I have a MacBook Pro mid 2012 13"

    Even had stubborn stepdad bought AppleCare, it would not have covered damages caused by your mucking about inside the unit.
    As we are all end-users like you and not professional computer repair peple, we can't estimate prices, especially if we don't know what broke.

  • Fusion Drive on Macbook Pro & Hibernation problem

    Hi,
    Two weeks ago I installed second SDD in my Optibay (Macbook Pro mid2010 13"). Now I have HDD (Seagate Momentus XT 750GB) + SSD (Kingston V300 60GB) in configuration like that:
    1) HDD in normal bay (because of SMS)
    2) SDD in optibay
    I configured this drives to work as Fusion Drive (it's really fast now!), but the main problem is hibernation (known as deep sleep also).
    When macbook goes sleep whole memory are written to disk (in my case - fusion drive), and when the battery die it should be resumed from disk. But I found, that people using OS X from optibay drive can't use hibernation. In this case the main HD is expanded on both drives (SDD + HDD), so this is a problem - memory image should be readed also from optibay/normal bay drives.
    Is there any workaround or any chance to get hibernation on fusion drive working in Macbook?
    The main reason I'm looking for solution is low battery problem - I can't sleep safely my computer on 2-3% of battery and I don't want to turn it off...
    Best regards,
    Dawid

    I have the same physical setup (though it's a MacBook 5,1, the first unibody 13"), but haven't tried Fusioning-it. (I have been holding off for 10.8.3 in the hope that it will have a properly fusion-aware Disk Utility when I get into trouble; my understanding is that all official Fusion Drive systems have a custom build of 10.8.2 with changes in Disk Utility and, I assume, diskutil.)
    As far as I know, and I'd love to be proved wrong, hibernation just can't work if the SSD is in the optibay (as mine is as well). It doesn't get power immediately on wake so it just doesn't work. The only thing you can do is disable hibernation support so that the system doesn't even try (saving you the hibernation-image space on the SSD); set OS X to restore your windows when you log back in; and then shut down when you're nearing zero battery. Alas.
    If this can't be made to work when the SSD is the boot volume alone, I can't imagine there's a way to make it work when it's in fusion drive.

  • How to upgrade my internal hard drive for macbook 5,2 from 160GB to 1TB?

    Hello,
    I wonder if you can please help me out.
    I wonder, is it possible to upgrade my internal hard drive for macbook 5,2 from 160GB to 1TB?
    Thanks,

    There's only one 9.5mm high 1tb drive around http://eshop.macsales.com/item/Samsung/HNM101MBB/
    With a video on replacing the hard drive http://eshop.macsales.com/installvideos/macbook_13_mem_hd/

  • Got a new external hard drive. Transferred all files from old hard drive to new hard drive. Connected hard drive to macbook. How do I get all my files to be recognized by iTunes and my already made playlists??

    Got a new external hard drive. Transferred all files from old hard drive to new hard drive. Connected hard drive to macbook. How do I get all my files to be recognized by iTunes and my already made playlists??

    Trying to download photos from IPHONE, IPAD to IPHOTO in IMAC after installing new hard drive.
    How did you import the photos to iPad and iPhone?
    If the photos have been synced to the iPhone and iPad using iTunes, you cannot sync them back.
    See this document:  http://support.apple.com/kb/HT4236
    You can't reimport pictures synced from your computer to your device back to your computer. You can only import pictures in the Camera Roll or Saved Photos from your device to your computer. If you need to retrieve synced photos from your device:
    If your photos are not in the Camera Roll on your devices, save them to the Camera Roll, share them to the Photo Stream, mail the photos, or, if you have iPhoto on the devices, use iTunes Photo Sharing.
    http://help.apple.com/iphoto/iphone/2.0/?handbuch#blnkee26bc1
    Save photos to your computer using iTunes
    Connect your iOS device to your computer.
    Tap a photo, album, event, web journal, or slideshow and tap Share> iTunes.
    Tap Selected, or change the photos you want to save (if you are saving a slideshow skip to step 4):
    Select different photos: Tap Choose Photos, tap one or more photos, and tap Next.
    Select a range of photos: Tap Choose Photos, tap Range, tap the first and last photos in the range, and tap Next.
    Select all the photos in an album or event: Tap All.
    In iTunes, click the button for your device and click Apps at the top of the window.
    Below File Sharing, select iPhoto (in Apps).
    Select the Shared Photos folder under iPhoto Documents.
    Click Save To and select the location on your computer where you want to save the items.
    To view your photos, go to the Finder and look in the location you selected above.

  • Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens

    Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens. I partitioned my hard drive and I tried installing Microsoft windows and that worked just fine.  But I do not understand why it wont install mac os x 10.5?????  PLEASE HELP ME.  Thanks  Hamid

    Try a new post in the 10.5 Installation forum.
    DALE

  • How to replace hard drive in macbook pro?

    How to replace hard drive in macbook pro?

    Hi S,
    If you have the newer unibody style, it's very easy. If it's one of the earlier models, it's considerably more difficult. Go to Apple Menu > About This Mac > More Info > Hardware and find your Model Identifier. Then go to ifixit.com, or powerbookmedic.com or macsales.com or youtube or others and there are illustrated, detailed directions. Good luck to you and post back if you have further questions.

  • What is the best external hard drive with MacBook Pro

    What is the best external hard drive with MacBook Pro?

    I agree with Allan, and that link is also called OWC, their hard drives are great.  Have three of their Mercury Pro Elite 2 TB quad interface drives.  They will connect eSATA, Firewire 800 & 400, USB2, so broad reange of options.  Drives seem to come Mac HFS formatted, but I always reformat and partition the drives.  Service and quarantees are top notch.
    They offer a wide range of drives/drive systems so like Allan said, spend some time seeing what the have.

  • Copy from thumb drive to macbook pro

    How to copy from thumb drive to macbook pro. Pictures

    Two additional comments:
    For pictures, Image Capture is another option.
    If you are running Mountain Lion, you may not see the thumb drive on your desktop or sidebar unless you activate that option in the Finder Preferences (General and Sidebar, respectively).

  • Possibility to share PS3 optical drive with Macbook Air (2012)

    Hello guys,
    Can anyone with solid experience on connecting PS3 and MBA tell me if it is possible to use PS3 optical drive with MacBook Air (2012)?
    Thanks in advance for the help,

    if you mean can the appletv connect to an optical drive remotely then the answer is no.

  • How to create dvd/cd image using super drive in MacBook Air

    I have MacBook Air and also Apple Supper drive for the same. can u help me to find dvd/cd burrning and copy software. and also guide me "how to create dvd/cd image using super drive in MacBook Air"

    First to create a video DVD you need to use DVD authoring software like iDVD.  You can purchase it from the online Apple Store while supplies last.
    For creating a disk image use Disk Utility.
    To burn items to a CD or data DVD just insert the disc in the optical drive and drag those items onto the disc icon on the Desktop.  Then drag the disc icon to the Trash icon in the Dock which changes to a Burn icon.
    OT

  • How to view windows Xp formatted hard drive with Macbook pro without losing data

    How to view Windows Xp programed Hard drive with Macbook pro with out losing data on hardrive

    Go to the First Aid tab in Disk Utility, select the external drive partition and read the format from the lower left, at the bottom.

  • *Internal Bay Drive or External Lacie?

    Hi All
    Need some advice, which one to get...
    Buying a macPro and was wondering about the pro's and cons of an extra bay drive. If i get an extra bay drive I cannot take just my drive and work else where unless they have a macPro. I just need advise should I get an extra bay for the macPro or get an external Lacie. I will be using the mac for editing media in FCP.
    Thanks in advance for your help.
    teeFX

    Why not both? You are going to want to use your drive bays, and you are going to want external drives for backup and storage and off-line. Only thing I question is whether to go with LaCie.
    Also, I prefer external SATA whenever possible. You can add a dual bay SATA case and PCI bracket for two unused SATA ports (hidden away). Pick up NewerTech kit $24.
    Or there are FW/SATA cases that use SATA drives.
    http://www.macsales.com/firewire
    I would plan to add three 500GB WD RE2 drives.

  • I have lost my software reinstall drive of MacBook Air. what is the solution, How can I get another one to replace?

    Hi, I have lost my software reinstall drive of MacBook Air. How can I get one for replacement? is there a solution?

    Call Apple Store.   1-800-692-7753
    Best.

  • Microsoft LifeCam VX-7000 driver for MacBook Pro with retina display

    Microsoft LifeCam VX-7000 driver for MacBook Pro with retina display

    I see a mention of Google Chrome and VirtualBox in your log. Stop using those and see if the situation changes? From what we know so far, the problem is a software one (Apple's fault), not a hardware problem. Mountain Lion is supposed to fix the issue, which should be out in about a week. So you could wait til then, upgrade to ML, and see if its still crashing or not.

Maybe you are looking for

  • Can't create new project or open a project - hangs & crashes every time

    I installed PRE8 last night. I can launch the app and get the welcome screen. When I click Create New Project, it initializes the application and opens the window/shell for the PRE8 app with the menu bar at the top, but never actually opens the new p

  • KEY MODE in forms

    Hello , I need to update "KEY MODE" in forms6i to "Non-Updateable" value.and then will have to compile the forms. Please let me know. how can I update this ?? I am new to forms. Thanks, Rajeev

  • Duplex Printing in Crystal Reports

    Post Author: Razzle00 CA Forum: General Where can I get some information or sample code on how to duplex print with crystal reports?  Thanks, Razzle

  • Two warehouse numbers in one plant

    Is it possible to have two warehouse numbers in one plant and how do i get this to work?Can the same users work in first and second warehouse?What are the things that i need to define searately in second warehouse number?What is the difference if i s

  • Two different languages in one report

    Hi All , I have a requirement , where i need to show content in Invoice in two language English and Arabic simulataneously.Its not like one invoice in English and other in Arabic.I am fine with numbers being shown in English. e.g : Name of the Comapn