Pattern not working in Blending Options!!

I am trying to complete this tutorial and I am stuck on "Step 9 - Style the metal bars". I have triple checked my work following the given steps, and still can not get the pattern to blend onto the bars! Here's a screen shot showing that I have the gradient matched to that of the tutorial. Any help would be greatly appreciated!!

Oh...I was looking at the Step 9 screenshot of the faded 9 "Style the metal bars". Never mind.
Other than that, I'm not really familiar with layered compositions and hope someone better trained can see what's happening.
Btw, you can upload your screenshots directly to the forum. Click on the Camera icon in the toolbar.
Gene

Similar Messages

Iphone 5 - Not working and usual options are not correcting the issue

My iPhone 5 will not start. I have tried many options listed on this site, however I have been unsuccesful in resolving the issue myself.
This is an issue that I had last May, which resolved itself after 2 or 3 weeks. I was discussing this with Apple support but got no answer on how to fix it. As it 'self fixed' (i.e. I did not do anything new that I was not trying for 2-3 weeks already and the phone just began operating normally) I guessed it was fixed so I stopped looking for a solution to a problem that did not exist any more.
However, the problem started again last week.
That is to say, the iphone powered down and could not be restarted immediately. I used the 'hard start' option which worked a couple of times, but now it will not restart. During an 'up' period, I upgraded the software to the lastest public release thinking that this might help. However, it has not.
Now, I only get a visual of the USB cord and a message to connect to itunes. When I connect to itunes it does not recognize the phone but does recognize that there is a software error. When I try to restore, it does not work as it brings me back to the error message.
Anyone any ideas? I am trying to organise the final pieces of my wedding in 6 weeks and I really need the phone to work right now! I will be contacting apple directly in the mean time, but if anyone has any ideas I would be very grateful.
Thanks.

Still I can't do anything ... the phone still same when i tried to re do the steps again given that itunes can't restore the phone " unkown error "
What to do ?/??

SAP BS 7.0 SR1 : sapinst not working with '-nogui' option

Hello all,
I'm installing SAP BW (BS 7.0 SR1)
I have a big problem with the new sapinst
When i try to lunch ./sapinst -nogui i have an error.. and sapinst exit
If i try to lunch ./sapinst without option, it work great !
System Os: RHEL5.2 x86_64
RDBMS : Oracle
Variable environment **
export PATH=/opt/IBMJava2-amd64-142/bin:$PATH
export JAVA_HOME=/opt/IBMJava2-amd64-142
export JCE_POLICY_ZIP=path_to/jce.zip
Error with sapinst -nogui execution ***
root@luqn2 IM_LINUX_X86_64# ./sapinst -nogui SAPINST_USE_HOSTNAME=ciBWQ-vip
[==============================] \ extracting... done!
inflated: US_export_policy.jar
inflated: local_policy.jar
inflated: Readme.txt
ERROR 2009-11-13 13:18:10.662 syxxcfsmgt.cpp:206
CSyFileSystemMgtImpl::getNode(const CSyPath &/tmp/sapinst_exe.2332.1258114688/jre/bin/../jce) const
FSL-02015 Node /tmp/sapinst_exe.2332.1258114688/jre/bin/../jce does not exist.
Opened sylib701_1.so
exe dir is /tmp/sapinst_exe.2332.1258114688
MessageLib initialized successfully.
Working directory changed to /tmp/sapinst_exe.2332.1258114688.
Opened /tmp/sapinst_exe.2332.1258114688/iaguieng701_1.so
Working directory changed to /mnt/SAPCD/SP_BW/InstMst_7.01_SR1__NW_ERP_CRM_SRM_ SCM/IM_LINUX_X86_64.
getspnam() returned NULL.
checking existence of account user="root" uid="0" succeeded with true.
inserted account (root, 0, USER) into the accountcache.
receiving and sending on port 21200
Environment variable SAPINST_JRE_HOME set to value '/tmp/sapinst_exe.2332.1258114688/jre'.
We need to support remote functionality .
The needed policy files are not present in the used JVM (/tmp/sapinst_exe.2332.1258114688/jre/bin)
JCE_POLICY_ZIP points to a file, assumeing that we have a jar archive.
Try to extract it with a jar call ....
A child process has been started. Pid = 2343
Node /tmp/sapinst_exe.2332.1258114688/jre/bin/../jce does not exist.
Unable to init; unknown execption was thrown .... SAPInst will terminate now...
Very strange error, and nothing on the web explain that problem
I had read a lot of sapnote but nothing to help me
Thank a lot for your answer
Best regards
Benoit.
Edited by: SYLVAIN DUSSART on Nov 14, 2009 12:56 PM
Edited by: SYLVAIN DUSSART on Nov 14, 2009 12:59 PM

Hi,
Here the solution:
Be careful, is very important to have a good policy zip file from Sun's web site
If the zip do not contain exactly
1 folder jce
All other files in the folder jce
That will not work !
For example, if you zip contain all file directly in the zip, without the jce folder, you sapinst will not start.
In fact, my jce zip folder was not like jce the zip folder on Sun's web site..
Best regards,
Benoît.

"Could not complete the Blending Options Command because of a program error"

I'm using CS5, PhotoShop 12.04 x64. I received this error message this morning when I tried to use the blending options. My software is in another state, so reloading is not an option right now. Can anyone suggest another way to address this problem?

Trash your preferences...

NAM and "unprotected identity pattern" not working as expected

Hi,
I'm trying to test such 802.1x wired environment:
windows xp sp3 as supplicant
windows NPS as radius server
2960 as authenticator
latest anyconnect (3.1.01065) + nam and standalone profile editor
I have a question:
Could someone explain me the difference between protected identity pattern and unprotected identity pattern (set in nam profile editor)? As I understand documentation PEAP-MSCHAPv2 is a tunneled method and it uses unprotected identity pattern to protect user's identity during phase 0. But if I use any fake identity here (anonymous, anonymous@[domain], etc) access is rejected (Access-Reject in switch debugs). I have to use exacly the same pattern in
unprotected identity pattern as in protected identity pattern ([username] or [username]@[domain]) to gain access, regardless of authenticaton mode (same in machine only, user only authentication)
I would be grateful for any clues
Best regards
Lukasz

Ok I've solved it... NAM works fine, problem was with NPS config. If you want unprotected identity pattern to work, just configure authentication methods under "connection request policies" not "network policies".

Multiple IDOCs pattern not working

Hello, When I tried Multiple IDOC to single file pattern, it is not working as expected. Everytime when a idoc reaches XI, it is going to a seperate BPM queue and not collecting the IDOCs, any idea??

Yes, I have refered. I have done exaclty the same thing as in SAP Pattern for collecting multiple idocs to single file. Everything is working fine in BPM too. But the problem is whenever the idoc hits XI, it is going to a seperate BPM queue instead of a same queue. So single message for each BPM and BPM waits for 3 minutes (mentioned in BPM) and times out. But my need is all the IDOCs should come to a single BPM queue and BPM needs to collect all the IDOCs and send it as a single file.

Install question- blur tool not working and guided option doesn't show a menu

I bought and dowloaded PSE11. However, I don't think I disabled my virusware. It took an especially long time to download and I don't know if it downloaded correctly. My blur tool does not work and my "guided" options are not there. What is the easiest fix- unistall and remove the serial number then reistall using same serial number? My question with this is- how many times can I do this, and or is there an easier fix? I have PSE11 and LR4 and I am going back and forth between which one to use. I really need all the options to work from PSE11. I am not a great IT person so I need the answer in basic easy language to understand please:-)
Thanks

The blur tool doesn't do much under the best of circumstances, so it may be working and just not making enough of a difference to see. However, for the problem with guided edit, reinstalling is probably the easiest solution at this point. Activation is tied to your hardware so you don't need to deactivate PSE if you don't want to, but it won't hurt to deactivate it. There is a limit, but for reinstalls on the same machine it's unlikely you'd ever get there, and if by some chance you did, you just contact activation support to reset things.

Sound system is not working. Stand option no more available.

I have HP pavillion dv 1000. After formatting the laptop, sound system is not working. I can't hear any video sound; stand by and hibernate options are no more available. Please help me.
This question was solved.
View Solution.

Nazia2011 wrote:
I have HP pavillion dv 1000. After formatting the laptop, sound system is not working. I can't hear any video sound; stand by and hibernate options are no more available. Please help me.
Well actually, if you really performed the impossible as you stated "formatted the laptop" how could anything work?
One can format and partition a hard disk which is a component of a laptop. Without reinstallation of an OS how can anything work?
Please restate in clearer terms what you did to which component to achieve nothing working.
Identify your notebook in more concise terms than just the series number from the front. Turn your notebook over and look at the tag. Post all but the serial number from the barcoded tag.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Patterns not working in adobe reader 9?

Hi all
I have a numeric field which is limited to 2 decimals.
When they enter 1000 it's displayed as 1,000 in Adobe 9 and 1000 in Adobe 8.
My pattern looks like this.
z9.99
I want it to be displayed as 1000 in all versions, any ideas why the patterns are working differently and how can I make it only display numbers and . as seperator and 2 decimals.
ex: 12345.67
10.50
Thanks!

I know this sounds crazy but try changing it to text instead of numeric, worked once for me

How can i navigate system preferences if trackpad is not working somehow the option were unchecked

How can i navigate system preferences if trackpad is not working?
Somehow the first couple of trackpad functions were unchecked and since they are not operational I can't click or tap to turn them back on.
I've tried shutting down and restarting and holding my hand on the trackpad for 3-4 sec. then sliding it off (another post had this suggestions).
I don't use the function keys at all to navigate the computer so I am at a total loss if the trackpad does not work.

Thanks for the response.
Unfortunately this did not work - the tap to click is still not checked - and the tap function does not work.
I did try it twice - and even used a stopwatch to be sure I got the time right.
I noticed there is also an instruction to reset PRAM (was with the SMC reset instructions). Is that something that may help?

Halftone Pattern not working

When I select a layer that has an image (I am going along with a tutorial on the Kelby Training site) and I am using all the same settings as they are in the video, when i get to the Filter Gallery > Sketch > Halftone pattern the view goes all white. Nothing. I can shoose others and they work but I do notice that many do not. What is going on here?
Many thanks,
Houston

Both of your color chips in your tool box are set to white. Press D to set them to default black and white.

LiveCycle Designer 7, Display Pattern not working

With Adobe LiveCycle Designer version 7.1.2295.1.242059:
I have a Form that has fields that the user fills out and an "Email Submit Button" where when the user clicks it, it submits the form via email that attaches a .xml file. When I receive the email, I noticed that all the "Date" fields data does not have the slashes in them unless the user specifically uses the pop-up calendar form to set the date value for each of these fields. If the user just types in the date as "02192007", the data does not get converted to "02/19/2007".
I tried modifying the various Pattern properties of the date fields on the form, but that does not seem to fix the problem.
Also, if I set the following "date{MM/DD/YYYY}|date{M/D/YYYY}" as my "Validation Pattern:" for my Date fields, and everytime I enter "2/19/2007", I keep getting my "Validation Pattern Message", indicating that the format is wrong. However, if I enter "02" as the month, it works fine; only single digit months fail.
The other settings for this field that I have are:
(Field Tab): Display Pattern: MM/DD/YYYY
(Field Tab): Edit Pattern: MM/DD/YYYY
What am I doing wrong and how can I insure that slashes will come across on the XML file when it is submitted even though I have set the pattern properties?

Designer 8 doesn't help either.
I have the same settings Shweta proposes - but the exported date format is still different.
You can fill the date field via script (like the following) then the date format is allright. To me it looks like the designer's "date format" is simply a string and the designer doesn't care a bit about the display patterns.
var today = new Date();
var dayOfWeek = today.getDay();
var month = today.getMonth()+1;
var year = today.getFullYear();
var day = today.getDate();
this.rawValue = day + "." + month + "." + year;

Display pattern not working - add $ for a numeric/decimal field

I've designed a form which has fields where I need to display currency(US) values.
I've made the fields as numeric type. I've added the display pattern as num.currency{} and also tried with num{($z,zzz,zzz9.99)}. But nothing seems to be working.
The amount value passed in the xml input is 7,002.978.
The result that I'm getting now is $0.00
When I changed the field to decimal type and added the same display pattern as above, the result that I get is BLANK: $
I need to format it such a way that it displays $7,002.99 in the form. There's no limit for the leading digits and the digits after decimal point should be 2. Is there a way to get this by changing the "PATTERNS" properties?
Please let me know how I can get the pattern right.
I'm using LC Designer ES2.

Hi,
By default it is not going to like the comma in your xml input, so you will need to change the data pattern. Try using num{z,zz9.999}, which works for your example value. With the comma it will treat the value as text and just display what it gets.
If your display pattern is num.currency{} then you will get two decimal places, but that makes the value $7.002,98. I'm not sure how you get $7.002,99 ... is that just a type-o?
Regards
Bruce

Unique DOB Pattern Not Working

I have a unique pattern for a DOB field. If the user doesn't enter the correct pattern, a message pops up and the focus is set to the field - see script below. This works perfect for me, but not my users. I'm using Adobe LiveCycle ES with Adobe Acrobat 7.0 and they are using Adobe Reader 9.0. Why would this make a difference?
form1.#subform[0].DOB::exit - (JavaScript, client)
var
r = new RegExp("^[0-9]+\\/[a-zA-Z]{2}+\\/[0-9]");
var
result = r.test(this.rawValue);
if
(result == true) {
true}
else
app.alert("Please enter a valid Date of Birth: DD/Mo. Code/YY; e.g. 26/JA/67");
xfa.host.setFocus("DOB");

Hi,
the regular expression seems to be invalid.
The console throws an error with the one you use.
Try this one:
var r = new RegExp(/^\d{1,2}\/[a-zA-Z]{2}\/\d{2}$/);
var result = r.test(this.rawValue);
if (result !== true)
xfa.host.messageBox("Please enter a valid Date of Birth: DD/Mo. Code/YY; e.g. 26/JA/67");
xfa.host.setFocus(this);

SCCM 2012 R2 PXE not working because DHCP Option 43 is configured to AVAYA

Hello!
We are having some issues with PXE and OS Deployment with some computers.
We tested computers DELL, PXE and DHCP works without any issues. But we tested some HP computers and we received the error PXE-E77 Bad or missing discovery server list
We investigate that error and found that is related with the Option 43 Vendor Specific Info is enable on the DHCP Server, the solution that we tested and works as expected is create a new scope on the DHCP and without enable the Option 43.
That was a temporary solution for the issue, nevertheless we need to use PXE over our network, and we cannot remove the Option 43 on the DHCP configured for AVAYA, so we need a solution that can coexist with PXE and Option 43 on the DHCP.
We will apreciate any advice on this issue.
Thank in advance.
Manuel
Manuel´s Microsoft Forums Threads

The easiest way to deal with this problem is not to use DHCP scope options. Implement IP Helpers instead. It is straightforward to configure and is the only MS supported way anyway.
http://www.gerryhampsoncm.blogspot.ie/2013/02/sccm-2012-sp1-step-by-step-guide-part_9487.html
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Pattern not working in Blending Options!!

Similar Messages

Maybe you are looking for