Patterns-how to browse them easily already filling in an area?

What's an easily way of browsing the patterns I currently have, but in a sense that they are already filled out on a large area so I can see the effect. So what I'm after is a way to ideally step through (single click) one pattern to the next, and see the effect it has as a pattern for a filled in area.
At the moment I see to have to keep going back to the Fill with Pattern for a given area and manally applying and then viewing. The only place I can find to see patterns is in the fill with pattern type dialog however (a) they are very small and (b) they are not tiled across an area so you can get a feel for what it will look like.
Thanks

Try using a Pattern fill layer and changing the presets in the properties panel.

Similar Messages

Maximum number of phone numbers in a contact, and how to add them easily...

1. Does anybody know what the maximum number of phonenumbers you can have in a single contact (iPhone 3G)?
I have a database of telemarketers numbers that I would like to add under a singel contact, put that contact on a silent ringtone, and that way not hear when these folks try to call me. The database contains over 5000 numbers, so I'm not sure if I can have that many numbers under a single contact...
2. What's the easiest way to add several numbers to a contact? Is there a program that allows you to add a lot of phone numbers to on contact easily?
I have tried with Windows Contacts and Outlook, but they seam not to be able to handle more than a few (4-6) numbers per contact, even though manualy adding numbers I have 9 numbers under a "Do nt answer" contact. But adding 5000+ numbers manualy in the iPhone is not an option...

I don't think you can do it any way but manually as your right outlook has a limit on number of Phone numbers. Does Norway have a do not call register? this would be a simpler way of getting rid of tele-marketers.
Sorry can't be of more help

My children are currently sharing an account with my ex husband, how can create them their own account so they are not dependent on him, will they lose all their music they have bought on his account?

As far as I can tell, they don't have their own libraries or store accounts

Thank you this helps, also once they create their own id, will their purchased songs be theirs?
Yes.
Can they share a library together somehow??
They can either share an Apple ID, or, if they create two seperate accounts, they can authorize the same computer with two different apple IDs so purchases across both accounts are accessible on the same machine.
An additional option for sharing an iTunes library across machines on the same network exists:
iTunes: How to share music and video - Support - Apple

How to migrate Themes, HTML templates, MIME objects to ECC6.0

Hi Friends
How to migrate Themes, HTML templates, MIME objects which are developed in SAP Web@Studio.
or How to use program SIAC_UPLOAD ??
regards
siddharth

Hello Murray,
Your steps sound correct. I would add that you generally need the following:
1. publish the IAC, SYSTEM, and WEBGUI Internet Services (also from SE80)
2. make sure the Integrated ITS is working. Meaning you should activate the ITS in the profile parameter, this can be seen in transaction SITSPMON. Some services in transaction SICF also need to be activated, like the default_host/sap/public/bc/its
From your error message though it looks like the URL you have used is either incorrect or you have used the External Alias feature in SICF? The URL for the ITS is usually http://host:port/sap/bc/gui/sap/its/service. Second, the error is about a language resource file (.htrc), you have not specified if you created one or not. To create one in the language you are logged in with just go to SE80, open your Internet Service and double click on the "Topic xx". Don't forget to publish after creating and saving it.
Edgar

All photos in portrait format are displayed blurred in the preview mode "fill" of the library. In all other modes e.g. "fit"or "1:2" the photos are sharp. How can I change this, so that the photos are still sharp when displaying them in the mode "fill"?

All photos in portrait format are displayed blurred in the preview mode "fill" of the library. In all other modes e.g. "fit"or "1:2" the photos are sharp. How can I change this, so that the photos are still sharp when displaying them in the mode "fill"? My Lightroom release is 5.7.1.
Thanking you in anticipation!

I'd like to get all these '-1 suffix' files together with their associated Develop adjustments into one folder (if they aren't already) so I can see them in Grid view in the Library module, which I use as my basic starting point for everything else at this early stage of my Lightroom 'career'.
To see what folder these are stored in, right-click on a photo and select "Go to Folder in Library".
Advice: if you are going to use Lightroom effectively, you probably want to stop using folders as your method to create a grouping of photos that are already in Lightroom; there are plenty of built-in tools, such as keywords, collections, color labels, etc.
I don't understand why the search on the entire catalog picked up apparently the same two file versions but also got the Develop adjustments when going to the relevant Folder didn't show the adjustment black squares against each image in Grid view nor were they there when the images were opened in the Develop module. Perhaps if I understood this, I'd be a bit more confident of moving forward myself.
These are most likely different versions of the same photo, in different folders. Lightroom stores the edits in its own catalog, and so it knows that one folder's photos have edits, and the other folder's photos do not have edits. Please understand that Lightroom is a database, it knows where the photos are at the time you import them (or add them to the catalog by synchronize), and then if you move things around in your operating system, Lightroom does not know anything about that and problems begin. Thus the advice to organize using Lightroom tools and methods and not operating system tools and methods.

How to add fields to already loaded cube or dso and how to fill records in

how to add fields to already loaded cube or dso and how to fill it.can any one tell me the critical issues in data loading process..?

This is sensitive task with regards to large volumes of data in infoproviders.
The issue is to reload of data in case of adjusted structures of infoproviders.
Indeed there are some tricks. See following:
http://weblogs.sdn.sap.com/cs/blank/view/wlg/19300
https://service.sap.com/sap/support/notes/1287382

My computer was hacked I had to install an earlier version of the disc provided for my mac and I have lost all of my applications already existing on my mac including iPhoto, and all other application. I am wondering how to get them back? I am in Japan

My computer was hacked using a softbank pocket wifi, I had to install an earlier version of the disc provided for my mac reset my user password and I still need to recover my administrator password that was altered. I have lost all of my applications already existing on my mac including iPhoto, and all other applications. I am wondering how to get them back? I am in Japan and I have proof of purchase in my iTunes, but on my computer all the allplications are blocked. I have no idea what to do to get them back. It is very annoying.
Thank you for your help.
Erika K.

Reinstall from the original source - the restore disks that came with the computer or from the App store if the computer did not come with disks
LN

I recently thought I was updating my Safari browser. When completed, I put all those little files that were on the desktop into the trash. Now my trash is saying it can't be emptied because there are locked files and I don't know how to unlock them

I recently thought I was updating my Safari browser. When completed, I put all those little files that were on the desktop into the trash. Now my trash is saying it can't be emptied because there are locked files and I don't know how to unlock them or get them out of my trash and they keep multiplying. And to make matters worse, I tried renaming them as pdf files thinking that might do the trick.

oh boy ! I'd ask you if you knew what kind of files they were or where they came from, but I don't think you could help me a bunch. Try going to the Utilities folder and running Disk Utilities. If you want to empty the Trash and it won't empty, go to the finder and choose "secure Empty trash". Worse case scenario-you may have to reinstall Snow Leopard, but I don't know what else to suggest. If you have a DVD of Snow Leopard, boot up from that, and reinstall the OS. This will not touch the stuff you have on your Hard Drive, then you can update from 10.6 to 10.6.8, otherwise Onyx? Maybe those files are part of the OS which needs them to keep running. if you hold down the Shift key on reboot, you can reboot in Safe mode and maybe you can take the files out of the trash that way
good luck
John B

I'm trying to make a slideshow in iMovie, but when I upload photos from my Aperture Library into the iMovie Photo Browser some photos (305 out of 427) are missing. How do I get iMovie to upload all of them?

I'm trying to make a slideshow in iMovie, but when I upload photos from my Aperture Library into the iMovie Photo Browser, some photos (305 out of 427) are missing. How do I get iMovie to upload all of them?

I have same problem. I could only see a fraction of my project photos if I browse the Aperture lbrary. It is the same problem when I sync the aperture photos to my iPhone or iPad. I still cannot solve it but I know a way to go around it for your iMovie to see the pictures so that you can work on your iMovie.
Here is the work around:
Export the photos from your album to your hard disk and re-import into your iPhoto. Now you should be able to see those photos that you want to work on in iMovie when you browse your iPhot library.

How do I make my already existing check boxes "checkable" [so I can check and uncheck them on PDF Expert]

How do I make my already existing check boxes on a (PDF Document) checkable - So I can check and uncheck them on PDF Expert or Annotate 101.
I am using ADOBE Acrobat PRO with millions of options, but no easy "here is how to do the one thing you want to do" anywhere within reason.
Please help me.
Thank You

Can you check and uncheck the boxes in Acrobat?

HT201272 My Windows PC has lost some music files I purchased in iTunes. If I try to use iTunes to restore them it just shows that they are already downloaded. How do I reclaim them?

My Windows PC has lost some music files I purchased in iTunes. If I try to use iTunes to restore them it just shows that they are already downloaded. How do I reclaim them?

iTunes: Finding lost media and downloads
Hope this helps.

I need to know how to expand the browser window so it fills my laptop screen

i need to know how to expand the browser window so it fills my laptop screen this isnt about the + or - tabs

have a look at the top left of your browser window that looks like two arrows pointing up and down in a slant, click it and it will put your browser in full screen mode...

How to record using OpenScript 9.0.1 in a browser which is already open?

I am actually trying to record in a browser which is already open. I suppose OpenScript opens a new browser when we try to record. I have unchecked the option "Always launch a new browser when recording a different script". But still i can see that new browser is always opened when trying to record. Also can i insert a object test for an object which is present in a browser already opened as i am facing the same issue of new browser opens as soon as i clcik "Capture Object" option from the "Object Test" dialog. Please help me.
Edited by: user12482051 on Jan 20, 2010 12:27 PM

Rao
Under View -> OpenScript Preferences -> Recording -> HTTP there is a URL Filters tab try removing all the filters.
Also make sure you don't have anything under the do not user proxy settings for this urls in IE:
Tools -> Options -> Connections -> LAN Settings -> check the user proxy server ...... -> advance and clear everything that you may have in the exceptions box#
Regards
Alex

Master-Detail: create detail-row(s) with id already filled in

I have two tables with an one-to-many relationship (connected by 'id'). If you select a row from the master-table, you'll see the detail-table (with the various row's belonging to the master-record). Now I made a button which users can use to add additional rows to the detail-table. They get a form which they can fill in and submit, the only problem is... I don't want them to manualy fill in the id, this should be the only field that should already be filled in (or better should be invisible, but filled in). So they should select a master-row first and then click 'add' to add a detail-row(s) to it. But I have absolutely no clue how I can do this... I tried creating custom create methods in the view-object or entity-object... but the problem I keep running into is where to get the row-iterator... I have know idea if this is the right direction to look for, maybe somebody can give me some advice.
Thanks in advance...!

Steven, hope you can help me out once more...
I have the same problem with a different view object, I'll explain...
First of all I set jbo.locking.mode to 'optimistic', now the problem...
I have two entity objects (Mbrships and Mbrshiphistory) which are connected by a foreign key (created in the database) on MbrshipID. Mbrshipshistory is also connected to the Aff entity object by a foreign key on AffID. The idea is simple... there are affiliates and a couple of memberships. An affiliate has/had a membership, that's where the membershiphistory-table comes in, which stores AffID, MbrshipID, DateFrom, DateTo and some other values.
Now, what I created... JDeveloper created entity-objects of all the tables and made associations of the foreign keys. I created the following view objects: http://213.93.142.238/oracle/datamodel.jpg and application module: http://213.93.142.238/oracle/applicationmodule.jpg The (MemberToMembershipHistory) view link between Members and MembershipHostory is based upon the association between the two tables.
The following is a screenshot of my struts-config.xml: http://213.93.142.238/oracle/struts-config.jpg
Editing mbrshiphistories works fine, but I get the following error when I try to add one: oracle.jbo.InvalidOwnerException: JBO-25030: Failed to find or invalidate owning entity. I also don't see the AffID already filled in in the add/edit-screen (same problem as in the opening-post) when I try to add one. I double-checked everything, but I can't find the problem. Do you know what I do wrong...?

How to see themes on full page of firefox like chrome and not only on the top bar

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/876505]]</blockquote>
how to see themes on full page of firefox like chrome and not only on the top bar

Personas or Lightweight Themes are the ones that just put a background on the toolbars.
You can look for the real (original style) themes here:
: https://addons.mozilla.org/en-US/firefox/themes/
:and you should be able to easily identify them by their pictures. I would suggest that you pick a theme that is identified under the version information to also run in Firefox 8, so you will be able to continue when you upgrade to 6.0.2 and above.
I am on 6.0.2 and I would be shown 450 themes.
Another method is to install a style using the "Stylish" extension, specifically a global style is what you are interested in. There are 3,697 global styles which is one [http://userstyles.org/categories category] of styles. Styles are not programs but you can put up a background picture of your choosing or color areas. But instead of hundreds to choose from you have thousands and they are mostly variations of another style. One advantage of a style is that you can modify a style to suit yourself with little or no programming experience.
: http://userstyles.org/styles/browse/global

Patterns-how to browse them easily already filling in an area?

Similar Messages

Maybe you are looking for