Pause and Resuming Iteration in MTM with video.

Hi Everyone,
Im investigating about how to pause a iteration (Pause Button and Button Save-Close) and save the video, when I resume iteration in MTM I need to continue saving the video.
My steps are
Iteration 01:
1.Check some steps like "Passed" and press Pause button.
2.Press Save and Close button (Test case status is "Pause")
3. When I check the "Paused" Test case, I can see the video of the "Passed" steps.
4.So, I press "Resume" to Resume test run, and Test Runner show "Resume" Button.
5.I press "Resume" Button and I start to check next steps for complete the Test case in iteration 01.
6. I press End Test and Save and Close button.
But the problem is that TFS only save video from the firsts "Passed" steps(Before pause) and others was not saved If I see Steps with video (video is attached only)
Is possible to continue saving video after resume the test?
Thanks.

Hi kurapica,
Base on my test in MTM 2013, it creates the new video file for the resuming test.
I think you don’t change the iteration in test result, please change the Iteration and check the files in the attachments section.
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Can we Pause and Resume Copy/Paste in Mac Systems ?

Hello,
We all know that we can pause and resume copy/pase function in windows system using various tools, so my concern is, can we do the same in Mac systems????

Ahhh you mean something like tera copy that is available for windows system....??
Well i dont thing so there is any application that offers pause and resume a copy process on mac, however looking for a solution I found an application that actually provides similar functionality and a few more features for mac copying process.
The tools name is turbo copy pro and you can find it here: http://www.turbocopypro.com/
But unfortunately, as for all the mac applications, this one is a paid tool. I had a trial run with this application and it seemed to work fine.

Audiobooks skip backwards multiple chapters often when pausing and resuming

As the title states I am having an issue where if I pause and resume sometimes the book will skip back multiple hours.
This issue is very inconsistent sometimes it happens sometimes not. It is something I will experience on almost every book multiple times at some point.
I am having an issue that spans: OS 5-7 or more, iPhone 4, 4s, 5s, iPad 2 and other. I believe Ive had the issue show itself on iTunes but I rarely use iTunes but fairly certain it has happened.
I make most of my audiobooks from CDs that I purchase but I have had the problem on others as well. I also sometime download audiobooks that are in MP3 format and convert them.
I have used different programs with the same outcome but at the moment I am using chapter and verse to create my audiobooks. I usually break them into 2 or 3 files because of how horrible the reliability is to begin with.
The M4B format seems to be plagued with issues and I am hoping I can put my finger on this one because it is by far the most annoying.
If it matters I typically use voice setting, high efficiency setting, VBR setting, 64kbits if stereo setting but set it to mono so it is 32kbits, and I have the sample rate set to auto. It results in files around 160MB/10HRs and sound no worse than what audible publishes them as.
I doubt that matters though since I have experienced this issues with different settings.
I also am currently setting my chapters to every 10 minutes to make skipping easier because of how common this issue is. If they are longer finding my spot is very difficult using the slider on an iPhone. I might even go smaller on the next book and make smaller files as well.
Any insight would be great. I am most certainly NOT the only person with this issue since I have been able to recreate it hundreds of times with CD source, mp3 source, on my MacBook, on my PC, with several different programs, without using any special program at all (iTunes only)
Apple most def will not be resolving an issue that is several years old so I'd like to know how to format my books in a way to avoid this.

One thing you can look at is if in iTunes, you right click on the audiobook track, choose get info, and go to the options tab, remember playback position should be checked.

How exactly do firefox download pause and resume features work?

Could I get technical information on how exactly these functionalities work? If you could provide enough details to enable writing a stand-alone program to download stuff from internet with pause and resume functionalities, it would be of great help.

Open the download window''' <Control> J.''' Right click on the file in question
and select pause. '''Warning ! !''' Sometimes the resume does not work on
some web sites.

"Pause" and "Resume" No Longer Work...HELP PLEASE!!!

Whenever I download podcasts, the "pause" and "resume" feature does not work!!! If I "pause" any of my downloads in mid-download..and then hit "resume"...I lose everything that has downloaded to that point and it goes back to the very beginning...this is aggravating since I have dial-up internet and it takes hours to download some podcasts. Do you know if this is a problem with iTunes for Mac or with the podcasts, all of which are from NPR websites? Personally I think it's iTunes...Has anyone else complained of this problem?? It only started to happen, I believe, after I updated my iTunes to version 7.5(19). Thanks so much for your help. ~spinniken

It's not just podcasts! I have had the same problem off and on, but it's just happened again. My internet access is only 64K (not much faster than the old 56K dial-up!) and I was 60MB into the new iPhone software when I paused. That's three hours gone!

App Store Download pause and resume problem in MAC OS lion

Hello,
I am facing a problem in App Store Download pause and resume problem in MAC OS lion. My internet connection has a problem of disconnecting frequently
because of this App store can not complete a download as its resuming download from the beginning again please help me
Thanks in advance
-Ashok Athukuri

Dear Ashok, I also facing the same problem....It shows keep on waiting state.I will share you if have a solution for it...

How are firefox download pause and resume features implemented? A high-level logic/algorithm would be greatly appreciated.

''dupe of https://support.mozilla.org/en-US/questions/1000658''
I would write a stand-alone program (supporting the pause and resume features) to download stuff from internet. Can someone provide info how this can be done?

Sorry that is beyond the scope of this Firefox user support forum. <br />
https://developer.mozilla.org/en-US/

My 5th generation Ipod locks up when I try to play a video? I did the factory reset (ugh) and still, total lock up with video. Any suggestions?

My 5th generation Ipod locks up when I try to play a video? I did the factory reset (ugh) and still, total lock up with video. Any suggestions?

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

TS3623 I rented a movie and can watch preview perfectly with video and audio feed as signal strength is at top when I checked. However, when I purchased rental video is fine , but I get scratched sound for audio. Any thoughts to fix?

I rented a movie and can watch preview perfectly with video and audio feed as signal strength is at highest when I checked. However, when I purchased rental video is fine , but I get scratched sound for audio. Any thoughts to fix? I rented movie within week and it worked. All previews of movies and show also works.

I have a suspicion that the problem is not in the recording device itelf, but rather in the playback-software, which is struggling with an unfamiliar audio format/codec/whatever-it's-called... I opened the file in QuickTime Player 7 (7.6.6) and selected "Show Movie Properties" and it says:
"Video Track: H.264
Sound Track: Integer (Little Endian)"
All current Mac systems support Integer (both Big and Little Endian) audio natively. The fact you can hear anything at all proves that the audio is playing back. The most likely problem would be a malfunction associated with the mic pickup.

Download speed will slow to nothing. Must continually manually pause and resume to force the connection to the download to complete. How to fix?

Have recently tried to download multiple files from multiple locations. These files will show up as downloading in the download manager. After 5-10 seconds, the download will slow to a crawl. In the window for the download manager, it will state that the download still has a download speed. When reviewing the time and progress, as well as monitoring my actual inbound/outbound internet traffic, I can conclude the download does not have any actual download speed remaining (that is, 0 kilobytes/sec).
To complete the download, I must manually click on the file being downloaded, force it to pause and then force it to resume. This will cause the download to actually download again for about 5-10 seconds before the download manager states that the download speed is slowing down (when in fact it goes back to 0 kilobytes/sec). This process must be repeated until the file is fully downloaded.
Also observed is that there will suddenly be more of a connection, downloading just a bit of the file, before going back to 0 kbps. This will happen every so often and is much slower than manually pausing/resuming. If left to its own devices for long, it also has a chance that it will decide that the file is complete and report that it has the full file size of the download. Review of the actual downloaded file shows that the file is incomplete for the supposed size of the download.
This should not be an issue with internet usage. There is no inbound/outbound traffic for my connection when the download speeds hit 0kbps. Loading webpages during this time load fine, only the download is unstable.

Problem Solved!!! :) No need Of Any AntiVirus !
Got back into '''Firefox 5.0.1''' !!
Its Working Great!

VoD - Pausing and Resuming all streams

Hi All
I hope you can help with this simple question.
In cenario where I have 20 (or more) people connected to my streaming server, these people might be watching the same content or not; is it possible to pause all this streams for a short moment like 20 to 30 seconds and resume the streams from where the people were just before it was paused please?
Many thanks
LG

One thing you can look at is if in iTunes, you right click on the audiobook track, choose get info, and go to the options tab, remember playback position should be checked.

Next and Previous don't work with video in Playlists

In iTunes for Windows 10.1.2.17, when playing video from a playlist, the video will end and the video window will close, and playback stops. No new video will play. The same thing occurs when clicking on the Next or Previous buttons (both on the video window and in the playback controls at the top of iTunes. Shouldn't the next video in the playlist (or the next random video) play once the first has completed?
This is a new behavior. It did not occur with earlier versions of iTunes.
The Next and Previous buttons work as they are supposed to when playing video from the library, but then there is no way to select specific videos or to randomize playback as is possible under a playlist (which is the whole point of the playlist.)
The Next and Previous buttons still work as they are supposed to when playing music from a playlist. This new odd behavior occurs only with video playback.
Is this a known issue, or is there something I'm missing in the operation of iTunes? Are other people experiencing this behavior?
Message was edited by: BTarver

This happened to me as well with Windows 7 32 bit (which I did as as upgrade from Vista Home Premium - if that might foul things up a bit) and affects Firefox 34.1 and IE. I did a system restore which took me back to Firefox 33 and Flash was fine. Later in the day Firefox updated back to 34.1 and I lost Flash again.

Can we pause and resume download from the mac store?

Is it possible to pause and continue the download later?
For example, the Internet stops to work then still can I resume the download?
please answer my questions.
thanks in advance!

Yes you can :-D

Less than two week old iPad Air crashes with youtube/netflix and Safari when loading pages with video (i.e. Buzzfeed with links to youtube and vine). What's up with iPad Air's bugs with videos??

Week and a half old iPad Air crashes with light usage of youtube, netflix and safari pages with video links to youtube and vine. The consistency of problems with videos has led me to determine that it must be bugs with iPad Air. Anyone else having this problem?
Details: iPad Air 16gb wifi, have only used about 25% of space and always close all apps before opening another. I also have only had a max of two tabs open on safari of basic internet surfing (i.e. A google search page, or imdb for example). These crashes are annoying as sh......

em74 wrote:
These crashes are annoying as sh......
I can well imagine that they are.
I would backup, restore to factory settings, restore from the backup and then try again. If that fails, restore again but do not use the backup - restore as new. If the iPad functions OK as new, then slowly rebuild the iPad adding your apps, music etc, methodically to see if you can pin down what might be causing the problem.
if all of that fails, it's time to schedule an appointment at an Apple a Store (must be done online) and have them take a look, or of it is lees than two weeks old, just return it for a refund and buy another one.

Pausing and resuming a PL/SQL proc from oracle PL/SQL DEVELOPER tool

I need to test a PL/SQL on how it reacts to an exception. I need to PAUSE it, do something outside of the proc and then resume the proc. Is there a PROMPT command in PL/SQL where it would wait for user input? Can I use DBMS_OUTPUT.GET_LINE to do this? Where does the GET_LINE raed its input from?

Perhaps the following demo will help. It uses straight SQL, since the PRIMARY KEY stuff does not require any sort of PL/SQL.
I set up 2 sessions in SQLPlus.
Session 1 - create a table with a primary key, insert and do not commit:
session 1:
C:\Users\Hans>sqlplus test/test
SQL*Plus: Release 10.2.0.1.0 - Production on Sat Oct 10 15:40:13 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
SQL> create table abc ( a number primary key enable);
Table created.
SQL> insert into abc values (1);
1 row created.Go to session 2 and insert:
C:\Users\Hans>sqlplus test/test
SQL*Plus: Release 10.2.0.1.0 - Production on Sat Oct 10 15:36:45 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
SQL> insert into abc values (1);it hangs here.
Switch back to session 1 and commit;
SQL> commit;
Commit complete.
SQL>and in session 2 I see
insert into abc values (1)
ERROR at line 1:
ORA-00001: unique constraint (TEST.SYS_C006468) violated
SQL>Trying this for different test cases: session 1 insert value (2) and session s, insert value (3)
Session 1
SQL> insert into abc values (2);
1 row created.
SQL>Session 2
SQL> insert into abc values (3);
1 row created.
SQL>Back to session 1
SQL> commit;
Commit complete.
SQL>Back to session 2
SQL> insert into abc values (3);
1 row created.
SQL>So I conclude that dups will block during insert.
For your original question - SQL and PL/SQL are run in separate engines. PL/SQL sends the SQL command to the SQL engine, which runs that and returns any return info (rowset, error, ...).
So any questions about SQL and SQL transaction control may be handled in a purely SQLPlus (or TOAD or SQLDeveloper) test case.
OTOH, questions about PL/SQL can be answered using a debug environment such as SQLDeveloper - see http://www.oracle.com/technology/obe/sqldev/plsql_debug/plsql_debug.htm

Pause and Resuming Iteration in MTM with video.

Similar Messages

Maybe you are looking for