Pause during simulation recording

In Captivate 8, can you pause while recording a simulation, then start recording again.

Are you talking about a software simulation (a normal cptx-project) or about a HD Video Demo (cpvc-project)? For the first just stop, and you can add more simulation slides later on.

Similar Messages

Can we pause during a video recording?

I had wonder that if that's possible for any apple device that we could pause during our recording usually like how the samsung devices, is there gonna be an update for Apple for that?

Some FTP clients will allow you to do this with files you are uploading to the internet, and some have ways to copy files to and from your local hard drive, so in theory, I guess it's possible this could be done, assuming you want to start a file copy, stop or suspend it, then re-start it again later.
Try using Forklift.
http://www.binarynights.com/forklift

Camcorder pauses during playback.

Both my canon video camcorders ( XH G1 and XL H1 ) pauses during playback or capture. Both are a few years old. The tapes I am using are new professtional Quality. Any Ideas?
While recording everything is fine.

Mike,
It will pause after only a few frames. It will then play for a couple of seconds then pauses, this keeps repeating.
I just noticed this accelerated play then pause a few days ago.
Months ago it did this but not nearly as frequently. I blamed this early pausing on the tapes I bought, since I was in need of fresh tapes on a job (my pro tapes took a hit and were broken) so I had to buy local Wal Mart tapes to finish the job.
Luckily I was able to pull enough footage off these to finish the job.
Since my first post I researched some and read that people were hitting the bottom of their camcorders during play back and this would resolve the pausing. I am not a fan of this solution. I also read in there that someone thought that the rollers or wheels in the camcorder are lose or worn.
Does the record and playback use the same drive system? If so this should not be the problem since when recording the time code keeps advancing without pausing.
Bill

Stimilus profile, CSV import to modify parameter during simulation

Hello,
I need to do the following :
- import a CSV file in the stimulus profile edtior
- Assign some of the variables to channels which are model parameters. These must be modified / updated during simulation.
- The channels are typically "starter, accelerator pedal". These are "parameters" of the models, not "in ports".
I'm having this situation because of the way the simulink model is compiled. There are no / few "in ports" but mostly "parameters" which can be modified.
It works fine with the workspace, the "car" can be started and controlled through the usual veristand workspace GUI.
But the stimulus profile editor fails to modify these "parameters". I've tried the demos, I could see how the inports can be modified but when I try to do the same with parameters, the "parameters" channels are not modified as expected by the CSV from stimulus editor.
Anybody have faced similar problems ?
Is it a bug/limitation in Veristand stimulus profiled editor ? Only inports can be updated during simulation (parameters of model cannot be updated during sim ?)
I've tried Veristand 2011 and 2012, with the same results.

This is a limitation of how VeriStand treats parameters. VeriStand is designed to optimize setting parameters around the use-case of setting it from the host, not from the control loop directly.
Do you have control over the model? In some circumstances you can replace Constant blocks with VeriStand IO blocks to switch the parameters to inports.
If that is not an option, you have a few options to consider:
1. In VeriStand 2012 there is a Stimulus Profile step to apply a set of model parameters. This is not a replay-type step. You only apply one value per parameter in the file, rather than playing back a waveform of some sort.
2. You can use LabVIEW (or Python, C#, TestStand, etc.) and the VeriStand execution API to read a CSV file and call SetParameterValues in a loop to send values down to the target. Note, however, that this replay will not be deterministic, because you can't really control the timing of setting parameters very exactly. This would mimic what you are doing from the Workspace.
3. Similar to #2, you can record a Workspace Macro of the parameter manipulation you do in the Workspace and then play that back. Again, this won't have deterministic execution, but maybe it's good enough.
Jarrod S.
National Instruments

Front Row pauses during DVD play

I've played at least 5 (3 of which were brand new) different DVD's in Front Row that randomly pause during play. After a few seconds the movie continues to play. I took the computer into the store to have the optical drive replaced, but it keeps happening. I tried just using DVD player and the same thing happens. Since the drive has been replaced, now I get "skipping over damaged area" when it pauses (only in DVD player). These are BRAND NEW dvds, there's no way they can be damaged already. Any ideas, suggestions, anything???

That's interesting. Since it doesn't seem to be a hardware problem, you might use the Accounts System Preferences to create a brand new user. Log out and log in as the new user. Does the DVD Player application give you the same trouble when logged in as the new user? If not, then a preference or setting your original user has must be interfering. Or some kind of preference file corruption. If the new user does have the same trouble, it might be time to run the Disk Utility and make sure your permissions are repaired and the disk is repaired. If that still doesn't help, it may be time to do an "archive and install" of Mac OS X to get a good copy of the DVD Player application back...
-Doug

Unexpected reboot during simulation using multisim on AMD dual core processor

We are using NI-multisim 10 in a classroom environment and are experiencing sudden reboots during simulation without giving any error or warning. This happens on multiple machines, all being Dell Optiplex 740 with AMD DC 2Ghz as processor. Since these problems happen so frequently, making teaching quite impossible, we have shifted PC-room and are now using older machines. On these machines - Dell GX280 using intell P4HT-2,8 Ghz - we experience no more problems.
Is this reboot problem related to the article : Unexpected Errors with DAQ Device on AMD Dual Core Machine (http://digital.ni.com/public.nsf/allkb/9CE22FE099AFB8BF862572FF007A5D45) and what do we have to do to fix this problem?

Nic
Can you verify your driver versions? Make sure that you are running the latest versions of NI drivers to ensure proper compatibility. If possible, you might try upgrading to multisim 11. If this does not solve the issue, try the single processor workaround in outlined in the following KB:
http://digital.ni.com/public.nsf/allkb/D0FC3BE7D9F331398625731A005D76B8?OpenDocument
Altough it is surely decreasing the performance of the system, certain cases have shown that there is no other possible workaround unfortunately.
Best Regards
Michiel
Applications Engineer
NI Belgium
http://www.ni.com/ask

Error during result recording in QE71

Hi Gurus,
I am using inspection point (copy of 150) in my inpection plan. When i am trying to save my result recording in QE71 system giving below error message.
Insp. Lot Oper Charac. no Sample Message text MsgType Message ID Msg.No.
80000000196 0010 10 2 You must enter a text for the characteristic result E QE 462 C60
Though i have maintained the resuts.
Please help to resolve this issue.
Regards
Sandip

You need check the inspection characteristic's control indicator.
Transaction QP03 (display inspection plan)
If you set 'Docu. required' in control indicator of inspection characteristic, additional text must always be entered to document the inspection results during results recording for this characteristic.
Try to change the indicator to 'No documentation' then there will be no more that message in transaction QE71.
Regards
Luke

Is it possible to get images automatically into text captions while simulation recording?

Is it possible to get images automatically into text captions while simulation recording?

I want that will be like described below (as it works in another software for captioning):

Has anyone had this issue. I created my song from itunes to garage band, took my iphotos to create a slide show and when I burned to idvd there are several pauses during playback?

Has anyone had this issue. I created my song from itunes to garage band, took my iphotos to create a slide show and when I burned to idvd there are several pauses during playback?

Hi
SlideShow in iDVD has a 99 photo limit - more than this and all sorts of error occures.
One can have more than one SlideShow on a DVD = X times 99 photos.
or assemble SlideShows in a movie editor (no limit at least not under 650 photos)
(only limit is Time in iDVD (movie time + MENU time --- 60 min or 120 min on SL-DVD and about twice on DL.-DVD )
I use
• iMovie up to HD6 - or -
• FinalCut any version
As they will give a better quality than iMovie'08 or 09 or 11 can do.
Yours Bengt W

"Noise" during video recording, normal?

Is it normal to hear a hissing/"noise" sound for lack of a better word during video recording on the ipod touch 4? I could be in a perfectly quiet room and I can still hear it. Is this normal or should I return it to a Apple store for another one? I ordered it online but figure going to the local store would be faster.

It has nothing to do with low light at least not in my case. I'm returning it to Apple, I think it's a bad speaker as I ran the memo app in a quiet room (Didn't say anything) and on playback it still made the sound (A shhhhhhhh sound)
Guess I got a bad one

Iphone shutdown during video recording

Hi folks! i've got several times a very strange problem during video recording. my iphone 4s (but it happened also to my brother iphone) shutting down during video recording giving the message about low battery.
to restart the iphone i need to connect to the battery charger but after the boot the battery is not drained. Today for example happened and the battery after the boot while connected to the battery charger was 53%.
As it happens also to by brother iphone 4s i don't think that it's an hardware problem, and the funny thing is that it happens in a random way. Some tims i'm able to register 1h of video without problems, other times 3m/5m and the iphone shutdown.

This is happening with my Iphone 5 with latest iOS. I'll record video and it will rapidly discharge battery. If it shuts down and I plug it in two minutes later it will come back with over 50% battery.
I've drained it completely dead then charged it for at least 4 hours numerous times. I started a seperate discussion about this and my phone's horrible battery life in general.

During video recording the auto focus doesn't work automatically!i must have a tap on the display for to use the autofocus! Ihave an iphone 4s

during video recording the auto focus doesn't work automatically!i must have a tap on the display for to use the autofocus! Ihave an iphone 4s

I know. Same issue here. When I'm not recording but have the video camera on, the autofocus works fine. As soon as I tap the record button and recording starts, the focus is locked until I tap on the screen to focus. I haven't used the camera all that much because of this problem.

Turn off the vibration or message notification automatically during video recording.

Please add on mechanism to turn off the vibration or mute the message notification automatically during video recording, due to the motor vibration sound always reocrd into the video.

You could set your phone to silent http://talk.sonymobile.com/t5/Software-Updates/Lollipop-New-Features/m-p/955490#U955490 It's not ideal but it does the trick. I agree with you, I wish we had an option that if an app/game it's on immersive mode, like while using the camera, we had an option to deactivate the notifications popping and/or the notifications without having to set the phone to silent.

IPhone 4 - Which microphone is used during video recording?

I was wondering if anyone knew which of the iPhone 4's microphones are used during video recording. I'm not completely sure but it seems like only the noise canceling microphone is used, whereas voice memos use the bottom microphone only.

Exactly correct. Why is was made this way, I have no clue.
I think both should be using the top mic rather then the bottom as that is were your hand usually is. I think it should be made an option.

How to turn flash on during video recording N73 ME...

How to turn flash on during video recording N73 ME ?
Any hack sort of something ?
Thanks
krates

if your camera settings is on automatic then the flash will be on while recording. that is how mine is set and it stays on.
everything happens for a reason
check out my blog @ http://mycellife.blogspot.com/

Pause during simulation recording

Similar Messages

Maybe you are looking for