Pause key not working whilst recording a video demo.

Hello,
The title says it all really. I've set the pause key to various different keys and have then pressed them whilst recording a video demo with narration.
On video playback, it is clear that the video recording was not paused at any point. What is the issue here? Is there a particular solution?
It isn't project specific as I have tried setting up various projects. The key is definitely set up in preferences and I always run Captivate with admin rights.
Is this a bug or am I missing something?
Thanks,
Jordan

Hi Vocusjordan,
Thank you for contacting Adobe Support.
The pause feature functionality in case of video demo is not available in Adobe Captivate.
However we appreciate for providing us the feedback and so you can use the below mentioned link to ask for a feature request:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Thanks
Loveesh

Similar Messages

When recording a Video demo slide in Captivate 8, pressing the [END] key takes more than a minute to stop the recording. Why is there such a lag?

When recording a Video demo slide in Captivate 8, pressing the [END] key takes more than a minute to stop the recording. Why is there such a lag? Additionally, the software I record experiences terrible lag times. For instance, It may take 15 seconds to display a 2-digit number I typed into a blank field. the same software has no lag issues when I'm not recording it.

Yes and no. The CPTX file is on my PC. Our software that I'm making the demo of is on the network. but I'm not the "IT Guy" so I can't provide specifics; however, I work at a computer software company and we probably have more servers than employees. The network hardware is kept current. I've been making similar tutorials for 10 years and haven't run into this issue until switching to the subscription Captivate.

Some keybaord keys not working after suspect virus on Tecra A

Apostrophe, delete, semicolon and end keys not working after a suspected virus attack. I found record of the same problem on the net but apparently this guy fixed his problem after he found scroll lock or num lock on.
This is not the case here but there is something going on with numlock - register shows 2 and not 0. change to 0 but when reboot back to 2 again.
Suspect changed back by bios. I thought i couldnt get to bios because DEL key not working but found ESC works.
Tried to reset default values for bios but then cannot save and exit as this required the END key to work.
I was running XP at the time of the (suspected) attack and could not rectify the problem so put the computer back to the OEM status which i hoped would help - it did not, same problem so rather than install all the software on the computer again with XP i upgraded to Windows7 - fresh install.
Still keys do not work - it was a real pain to start with as my computer was set up to ctl+alt+del to log in and i had to do this with on screen keyboard - XP - this also showed that numlock was on before and after windows boot.
The reason i suspect a virus - my wife was watching one of her tv shows on line from home country (another toshiba laptop) and i needed to use that laptop for something else so i asked her to use mine - later on we turned the laptops off and in the morning turned tham back on again, the other laptop with AVG virus protection flagged several hits and this one with (FAMOUS and completely up to date) Norton flagged nothing - once i got into it using on screen keyboard.
Problems with this computer was found after scanning with a different antivirus.
Anyway - i am left with 4 keys that do not work on my keyboard (actually they did work after i logged into the computer for the first time but i had to hold them in for a long time - and then next time i rebooted, not work at all and havent ever since)
Any assistance here would be greatly appreciated, i have been working on this all weekend with no joy at all.
Thanks in advance.

Thanks Xardas,
I have essentially done both - tried Toshiba OEM status found on a small partition of the toshi hard drive - no good - then did a fresh install of Windows 7 - still no good
You know - as cunning as it sounds - i cannot reload the default settings in BIOS as it requires the END key to work so i can Save & Exit - all i can do is Exit Without Save - i sort of feel snookered at the moment.
Toshiba got back to me today and said that i have tried everything they would have (yeah for sure) and to take my machine into a service centre for a hardware check - yeah right on boys!
Check out this guys post below found on Kioskea.net - getting close to a year ago...
ms ml - Nov 10, 2009 12:52am GMT
Hi there, I was hoping that you might be able to help me with the problem that I seem to be having with my Toshiba Satellite Laptop Keyboard too. For a few days now I havent been able to use a few of the keys on my keyboard, including (1) delete (the backspace key is still working though), (2) colon/semicolon, (3) apostrophe/quotation marks and (4) end (the home and PgUp and PgDn keys are still working though). Any suggestions?
Identical to my problem....obviously this guy had the same problem as well...see below - same thread.
yab - Feb 9, 2010 4:47am GMT
hi did you ever figure this out? i have the same exact problem...
However, i was not able to solve my problem the way this guy did - my scroll lock is not activated - it seems to work ok (on and off) i tested it using Excel to move around the cells.
yab ms ml - Feb 9, 2010 7:57am GMT
Nevermind. For me it was scroll lock. My apostrophe, semicolon, and delete keys are alive and working again. I hope you have the same easy fix.
Incidently - never hear from the first guy again - probably ended up being his scroll lock.
all sugestions welcome - sorry my smily face has no eyes -) guess why!

A s d f g keys not working on a wireless Apple keyboard for Imac

a s d f g keys not working on a wireless Apple keyboard for Imac.
When I type they on't work.
*Exmple o complete entence.
Plee help! Thi i very rutrtin. I on't wnt to ue cut n pte or ome letter.
Thnk you in vnce.

Make a Service appointment for the keyboard at your local AASP.
Apple - Find Locations
I'm not sure how old it is, but it is covered for 1 full year as long as it didn't take that 19 story dive.

Volume and brightness keys not working with new keyboard on imac

I just purchased a new wired keyboard for imac and brightness and volume control keys not working . i have tried adjusting keyboard settings. I have software version 10.5.8. Do I need to upgrade software. Thank you for any help.

Do you have "Automatically Adjust Brightness" check box ticked in System Preferences > Displays > Display ? If so, you can't manually adjust brightness.

Is there any way to PAUSE/RESUME the actual recording while recording a Video Demo slide in Captivate 8?

If I have to take an "off-screen" action while recording a video demo slide in Captivate I am forced to END and start a separate video demo to continue.
This fragments my demo and seems an unnecessary set of steps.
Is there a way to pause the recording for long enough, say to clear my throat, and then resume?
Thanks.

Hi kjjr54,
Please refer to the link below:
Create Mobile Learning & Elearning Content. Screen Capture, Screen Recorder | Adobe Captivate 8
Hope this helps!
Regards,
Sheena

Esc key not working in windows 7

Hi,
I have a HP Pavilion dv6-4XXX series. It's almost been 2 years I bought this notebook.
Recently I faced an issue. The "ESC KEY" has stopped working. However I could find that it's working fine in BIOS but not when I am logged in to windows. I have windows-7 installed.
Please let me know what could be the issue and the solution for the same.

Hello siddharthmishra,
You’re having a problem with the ESC key not working.
Go to device manager and uninstall the keyboard and restart the computer. This should uninstall and reinstall the driver for the keyboard.
Here is a link to device manager.
If the problem has not been happening for very long, you might try a System Restore. This will take the system back to before the problem started happening without affecting any of your files.
Here is a link to a System Restore.
Let me know how everything goes.

Command, option, ctrl, fn keys not working

thanks to a visiting dog who got tangled up the power adapter my laptop ended up on the floor, wide open with the keyboard popped out. I have inspected the connector cable and it looks OK to the naked eye. I disconnected the keyboard cable and re-connected.
When using an external USB keyboard all keys function normally. When using the built-in keyboard the only keys not working are the command, option, ctrl and fn keys. I have restored modifier keys to default (I had never changed them) but this did not help. I also toggled the "use F1-F12 to control..." option in the keyboard preferences to no avail and have restored keyboard shortcuts to no avail.
Is my keyboard shot? Is the a pref file I might delete?

Hi, Mel. If the external keyboard works properly, I'm afraid you have to figure your built-in KB has been dogged to death. I hope the pet owner will do the right thing by you. I also hope the KB is all that was damaged. How are your adapter cord, plug, and DC-In port? Does your battery still charge OK?
Whenever anything visits my house that's active, inattentive, and built low to the ground, my Powerbook runs on battery power only. I haven't seen one yet, but the new magnetically-connected, easily- and harmlessly-detached MacBook Pro AC adapters sound like a superb idea to me. Too bad our PBs can't use 'em.

N95 SHORT CUT KEY NOT WORKING

Anyone had any problems with there N95 top left shortcut key not working,mine won't do anything when pressed then suddenly has a mind of it's own and keep pressing it's self and sending blank text messages to my first contact in my address book...
Tried software load,no cure is it back to the shops..

my daughters as just started doing the same i have updated the software and had buttons changed but still the same

Keyboard: some keys not working

Some keys not working. Need help/suggestions. Not great with computers so PLEASE give details/steps re: how to do what you suggest - thanks!
Details: intel based iMac running snow leopard 10.6.8. Apple wireless/bluetooth keyboard (came with the iMac).
Some keys suddenly stopped working: space, tab, capLock, option key to the right of space bar (one on the left works), down arrow
The problem happens in various programs (safari, pages, etc)
The keyboard is fine on another iMac
A different keyboard is fine on this/the involved iMac
(nutshell: keyboard works fine - computer works fine, unless they're together)
Here's what's been tried/checked:
-checked the settings for universal access ("mouse keys" are off) and checked for any bluetooth keyboard shortcuts.
-in system preferences "speech" is not set for "speak selected text when the key is pressed" - this is not checked/selected
-tried creating a new user but had the same issue so it's computer-wide rather than just a user account
-removed the keyboard and reconnected (using the +/- signs and "disconnect" and putting in a new code of numbers to pair keyboard)
-language/text is set for english
-did the keyboard viewer and the keys in question did NOT highlight when pressed (but don't forget the entire keyboard is fine on a different computer so thekeys aren't the issue)
-"slow keys" is turned off re: keyboard in system preferences.
Any help is welcomed. It's frustrating knowing the keyboard works, just not with this computer. Please help. Many thanks!

yes - not sure how this works...if you can see my original post there are a lot of details in there. If you can't...
nutshell: the keyboard works on a different iMac
             a different keyboard works on this/the involved iMac
             I tried to create a different user and the keyboard still does not work so it is computer-wide
             I also removed the keyboard from the computer (using the +/- symbols and disconnecting and then repairing it. The problem remained
Thanks for any help. It's crazy that the keyboard is fine and the computer is fine but together, there's the problem.
Thank you!!!

Sound key not working

volume key not working ofter last update

Hello Amandodsouza,
It sounds like you are experiencing some unexpected behaviour with the on screen keyboard after updating to iOS 7.1.1. I would start by closing all the running apps on the phone:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that and restart the phone and test the issue again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Thank you for using Apple Support Communities.
All the best,
Sterling

E545 and Function key not working

Any help here is apprecited. My function (Fn) key is refusing to work at all. None of the special features are able to be used. I've checked all my drivers, and followed the instructions in the User Guide, but some of the options described in the guide are even showing on my computer.
I'd love for some help on this issue, as the computer is pretty worthless right now.

Hi Jamesbjenkins,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with keyboard function keys not working on your ThinkPad E545.
Is the system updated with all the latest drivers and application? To confirm with I request you to run ThinkVantage system update tool. This will search for all the required drivers and application for your system and will update.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

2.1 History Shorcut Keys not working

Hi,
When I try to retrieve statements stored SQL-history using shortcut keys nothing happens.
I tried Ctrl-Shift-Down, Ctrl-Shift-Up, Ctrl-Down and Ctrl-Up but in SQL-worksheet but nothing happens.
I even defined new shortcuts also to no avail.
Does anybody else face this problem?
Regards
Ernst

Logged
Bug 9238928 - otn: sql history shorcut keys not working
-Raghu

Return & shift keys not working

My keyboard is unresponsive. problms started w/ "L" and "9" and "Enter/Return" keys. Did a s/w update and reboot but still no success. Now only "Shift" and "Enter/Return" keys are unresponsive.

I tried the troubleshooting steps listed in the article linked above but ran into the following problems:
a) the View menu doesn't have a "Speech" item listed (I'm running 10.9.2)
b) My MacBook Air doesn't have a disk drive; impossible to start up from an Install disk as recommended in step 10.
None of the other steps helped (sticky keys off, slow keys off, mouse keys off, etc)
Looking at the forums, looks like several other people have the issue of just the right-side shift and return keys not working, like me. Could we please have some advice that is specific to that particular issue?
In the meantime I'm using only the left-side shift and have downloaded and installed KeyRemap4MacBook and remapped my backslash key so it issues the "return" command. A clunky work around but it seems to do the trick, at least.

My backlit keyboard keys not working?

How come my backlit keyboard keys not working? When I try to use them I get a circle with a line running through it?

cpickrell wrote:
Jax, the backlight is currently usinig a sensor to turn the light on and off for you. This uses the least amount of battery. If you want to test or control the lighting yourself, go to the Apple Menu, select System Preferences, click on the Keyboard icon. Here you can turn the automatic setting on and off. If it is off, you can use they keyboard keys to turn the keyboard lighting on and off.
Exactly!

Pause key not working whilst recording a video demo.

Similar Messages

Maybe you are looking for