Pause Movie and Play song file, sound is scratchy and hear movie sound

When I play a movie then pause and go to a music file the sound is very scratchy and I can hear stuff from the movie playing. Once it was a sound that just kept repeating, the other time i could the voices but they were in super slow motion. Any help would be appreciated in understanding this issue.

That is what is happening, I hope that they resolve this issue as it seems to be something I do quite often as everyone wants to see the video playback then on my drive home I kick off an audiobook for the drive.
Thanks

Similar Messages

  • ITunes no longer plays song files in 5.1 - only in Stereo

    Greetings!
    Unfortunately, since a few days ago, iTunes has stopped playing my songs in surround sound and is instead only using my front speakers currently, while I can play the very same songs in surround sound using a different audio player. I've tried the following to no avail (in no particular order):
    rebooted
    completely reinstalled iTunes
    used a System Restore Point from before the problem occured
    reinstalled the driver for my Sound card (Asus Xonar DSX)
    set Speakers to 5.1 in in both the Xonar DSX Audio Center and under Windows/Playback/Speakers/Configure
    disabled my Realtek HD Audio device in my BIOS
    installed Quicktime and set Audio to 5.1 under Preferences
    switched between Direct Sound/Windows Audio Session in iTunes' Preferences/Playback
    removed and reinstalled my Audio devices in the Device Manager
    plugged in/out my USB Headset (which I think might've been the cause of the problem, since it usually causes iTunes to go into Stereo mode until I restart the program)
    My specs are:
    Windows 7 64-bit
    iTunes 11.0.2.26
    Asus Xonar DSX 7.1 Surround, latest driver
    Teufel 5.1 Surround system (all speakers still work perfectly)
    Sadly, nothing helped. And I'm sure iTunes can play the songs in surround, since it has been doing so ever since I first started using it (and it has been my go-to program to test my audio for troubleshooting up until now).
    Thanks for any replies!

    Solved it on my own. The solution was to set my main Playback device in the Windows configuration to Stereo instead of 5.1 - which also set my Channels to 2 in my Asus Xonar DSX Audio Center, which I had set to 6 previously.

  • Ipod fastforward, pause, skip while playing songs

    Hi guys,
    As the title suggested. My Ipod gets naughty and fastforward, pause, skip itself while i'm playing some songs. Has anyone got the same problem??

    No
    Try the solutions mentioned in the iPod Nano 5th Gen. User Manual.

  • Play WAV files into the .jar

    Hello,
    I'm doing small application Java with Netbeans.
    I need is to play .wav file sounds are incorporated into the jar.
    I do not want to use external libraries or external sound files, etc.. I want to go with my .JAR to the office, home, etc ... just need the JAR to hear the sounds.
    I've created a folder "Sounds" in "src" and in that place I have my sounds. (Project / src / sounds). It's a way to incorporate a JAR file, or am I wrong?? Run independently of the sound files.
    At the time of reproducing the sound I do the following:
    Clip sonido = AudioSystem.getClip();
    File f = new File(getClass().getResource(/Sonidos/alarma.wav).toURI());
    sonido.open(AudioSystem.getAudioInputStream(f));
    sonido.start();
    If I run the program with netbeans, I play sounds, but which only transfer my .JAR to another computer, does not play ...
    Any ideas?
    Thank's.

    I don't understand, before I had done as you have written me, but did not work, but now it works.
    Problem solved. Thank's.
    Posting the code here:
    InputStream path = getClass().getResourceAsStream("/Sonidos/alarma.wav");
    try
    sonido = AudioSystem.getClip();
    sonido.open(AudioSystem.getAudioInputStream(path));
    sonido.start();
    }catch(Exception fail)
    System.out.println(fail);
    Edited by: 892291 on 19-oct-2011 10:37

  • I have moved my file from my old computer.  Now that I am trying to play songs and movies iTunes says the original file could not be found.  How do I reverse this problem?

    I have moved my file from my old computer.  Now that I am trying to play songs and movies iTunes says the original file could not be found.  How do I reverse this problem?

    Put the files back where iTunes expects them to be.

  • When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and th

    When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?

    Randy Ruttger
    Thanks for the follow up.
    Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
    The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
    You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
    On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
    So the remedy to the problem that you presented in this thread could have been...
    1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
    2. Move to another version of Premiere Elements (which you did)
    I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
    Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
    Best wishes,
    ATR

  • I recently restored my laptop and also iTunes from an external hard drive, but when I play songs, it says the original file could not be found. How do I locate and fix this?

    I recently restored my laptop with Windows 7 and imported my iTunes library from my external hard drive. When I try to play songs, it says it cannot and that the original file could not be located. How do I fix this?

    Put the files back where iTunes expects them to be.

  • I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?

    I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?

    The "restore disk" is built into the Mac. See About Recovery.
    Need more specifics about what error messages you got while installing Adobe Flash.
    However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
    Click the Try something new! link at the bottom of the YouTube page.
    I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

  • TS1717 I can play audio files in iTunes but I can't play downloaded tv shows or movies.  Everytime I attempt to play them, iTunes stops working and closes.

    I can play audio files in iTunes but I can't play downloaded tv shows or movies.  Everytime I try to play them, iTunes stops working and closes.  Any information will help.

    Is QuickTime installed? If not it might help to install it.
    If so is Direct3D Video Acceleration enabled? If so it might help to disable.
    tt2

  • The sound doesn't work.  It's set appropriately in settings, the volume is turned up all the way with the side buttons, but no volume.  When we try to play songs, it acts like it's going to play and then goes back to the play list.  Restored and still no

    It's set appropriately in settings, the volume is turned up all the way with the side buttons, but no volume.  When we try to play songs, it acts like it's going to play and then goes back to the play list.  Restored the device and still no sound.

    Try A and B
    (A) Restart iPad
    1. Hold down the Sleep/Wake button until the red slider appears.
    2. Drag the slider to turn off iPad.
    3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
    (B) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • TS1424 my recent downloaded songs play for about 1 min then they stop sound file continues to play with no sound

    song plays but the sound stops on recent downloaded songs, i did delete and redownload with no luck

    Try again. If the problem persists contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
    tt2

  • TS1584 I had my iTunes libray on my old PC, just transferred to my new PC, downloaded iTunes, and my library is there, but can't play songs, says can't locate original files?

    I had my iTunes library on my old Dell Inspiron, transferred all info to my new HP Pavilion PC, downloaded iTunes and my library is there, but when I try to play songs, it says can't play because can't locate the original files...how can I activate the songs to play?  The iTunes library is also in my Windows media file, and the songs will play in there, but I set iTunes as my default music manager and want the songs activated in my iTunes library so I can play them and sync my iPod.  Help?  Thanks.

    This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    See also Getting iTunes & Windows Media Player to play nicely
    tt2

  • Netflix and Youtube will not play on Firefox but I can still hear sound and can pause with the space bar. Works fine on Internet Explorer.

    All of a sudden last night after Firefox restarted after an update I am no longer able to play Netflix or Youtube. I can hear the sounds from whatever I select to play but the browser is black and I can even pause using the space bar but no interaction with the cursor. Both Netflix and Youtube work fine on Internet Explorer... I tried updating plug ins, I tried uninstalling and reinstalling plug ins and I even uninstalled and reinstalled Firefox itself but nothing has helped. Not sure what steps to take next...

    Hello,
    Some problems with Flash video playback can be resolved by disabling hardware acceleration in your Flash Player settings. (See [[Flash Plugin - Keep it up to date and troubleshoot problems|this article]] for more information on using the Flash plugin in Firefox).
    To disable hardware acceleration in Flash Player:
    #Go to this [http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues Adobe Flash Player Help page].
    #Right-click on the Flash Player logo on that page.
    #Click on '''Settings''' in the context menu. The Adobe Flash Player Settings screen will open.
    # Click on the icon at the bottom-left of the Adobe Flash Player Settings window to open the Display panel. <br/> <br/>[[Image:fpSettings1.PNG]] <br/>
    # Remove the check mark from '''Enable hardware acceleration'''.
    # Click '''Close''' to close the Adobe Flash Player Settings Window.
    # Restart Firefox.
    This [http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html Flash Player Help - Display Settings page] has more information on Flash Player hardware acceleration, if you're interested.
    Does this solve the problem? Let us know.

  • I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

    I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

    I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?
    Both the AVI and the MOV file extensions refer to the file container and not the compressed data the file contains. Both are generic file containers in that each may contain any valid combination of audio and/or video data that is compatible with the codec component configuration of the system on which the file was created. On the other hand, whether a file is playback compatible, conversion compatible, and/or edit compatible depends on the data actually contained in the file container. So, you are basically dealing with two separate issues here—the container and what is inside it.
    Basically, if you want to make your files ediit compatible with iMovie, you must change your file container to one that is acceptable to iMovie and convert the data to edit compatible audio and/or video compression formats as may be necessary. The best approach is to determine what codecs were actually used to create the original AVI files and add them to your system if possible. In most cases a codec package like Perian can be added to your system's codec component configuration to may the AVI file playable. Once they are playable, in the QT 7 app then they can be chnged or converted to file types and compression formats that can be edited in iMovie. (While Perian handles most codecs commonly used to create AVI files, it does not handle all possibilities and, while the Perian codec package still works under cureent Mac OS versions, its development group has decided to drop further development/support of the package.)
    Background: AVI is a file container originally developed by Microsoft back in 1992 but for which official support was discontinued about 11 years. Despite its limitations, Windows users still tend to use this file based on its open source ease of use and generic nature, thus, making its use so popular that most users are unwilling to switch to more modern but less generic file types. Since some AVI legacy compression formats have never been transcoded for the Mac or use beyond OS 9 or OS X PPC platforms, it is often important to know what specific compression formats are contained in the AVI file to know which codecs to add to your system and which not to add in order to avoid possible codec conflicts.
    You can use many different converters to convert AVI files to iMovie edit compatible files. Most third-party apps contain their own buit-in codecs which do not relay on the Mac codec component configuration. Free ones, like HandBrake, usually have limited conversion capabilities while those that have more varied outputs are usually commercial in nature and will cost you additional cash. QT 7 Pro or the free MPEG Streamclip app allow you to access you own system's component configuration and use any available codec component like DV, AIC, MPEG-4, H.264, Photo JPEG, etc.—all of which are iMovie compatible for editing purposes—but only after making the AVI file QT 7 player compatible.
    In order to determine what compression formats wewre used in your AVI files you can
    1) Try checking the Finder "Info" window,
    2) Use the "Inspector", "Media Info", or "Properties" window of any player app that will open the file, or
    3) Use a general media utility app like "MediaInfo" to read the file characteristics.

  • Can anyone explain why on my iPhone 4S, whenever I play music, it won't hold my place in the song? I pause it, and then when I go back later, it's all the way back at the beginning? A google search was not very helpful, any tips would be great!

    Can anyone explain why on my iPhone 4S, whenever I play music, it won't hold my place in the song? I pause it, and then when I go back later, it's all the way back at the beginning? A google search was not very helpful, any tips would be great!

    Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

Maybe you are looking for