Pause/Play functionality not working with publish to HTML5

Hi experts,
I am creating a Captivate course to be deployed on iOS and publishing to HTML5. We are using custom buttons (not playback controls) for navigation to advance through the slides. My client would also like Play/Pause functionality for some of our embedded (MP4) videos. I used the following tutorial to create these buttons to toggle the Play & Pause functionality:
http://www.youtube.com/watch?v=0v2F0NyEAfs
This worked PERFECTLY when previewed in a browser from Captivate, but does not work when published and launched in HTML5 format, from the same browser. I didn't use any Flash content, rollover functionalities, or anything noted in the limitations list for HTML5 output. The conditional functions I have set for my buttons are:
PAUSE:
Hide > SPI_Pause
Show > SPI_Play
Assign > cpCmndResume with 0
Assign > cpCmndPause with 1
PLAY:
Assign > cpCmndPause with 0
Assign > cpCmndRsume with 1
Hide > SPI_Play
Show > SPI_Pause
The issue I am encountering is that the video completely pauses itself the moment the pause button displays on the stage (no matter where I place it in the timeline). I'm not pressing it or anything, it just initiates the cpCmndPause function and disregards all the others I have set. From there the conditional sequences are rendered useless as the video is already paused even though I didn't press the button. I've verified this happens anywhere I try to use the cpCmndPause function.
I am running Captivate 6.1.0.309 on Mac OSX 10.8.2. I've tested the HTML5 output in Chrome and Safari with the same results. I did see a thread regarding a patch install (for 6.0.1xxx) that resolved some issues, but this appears to be an earlier version of what I have installed so this should have been resolved with my install?
Please HELP!

So, was this issue NOT resolved with the patch, or is this an entirely new/different issue?
It seems as though this functionality is pretty basic, so I don't understand why this is a restriction with HTML5 output? Please advise, if there are restrictions with advanced actions that are not noted in the HTML5 limitations documentation, then they should be.
Thank you, I too have a client deadline and have purchased this subscription based on the documentation Adobe has provided about the application's ability to publish to this new format.

Similar Messages

Send & Recieve functionality not working with WebDav after installing Acrobat XI

Send & Recieve functionality not working with WebDav after installing Acrobat XI for PDF. Acrobat XI is complete installations(Trial Version).

Hi Kiro ,
Did you try opening that file in any other browser ?If not ,please try doing that once and see if that works for you.
Try Repairing Acrobat once and see if that helps.
Launch Acrobat>Navigate to Help>Repair Acrobat Installation.
Regards
Sukrit Dhingra

Evaluate_Analytic function not working with VPD enabled

Experts,
One of the column formula has evaluate_analytic function in the report. The report works fine with no errors when Virtual Private Database is not checked in the Physical Layer's datasource object, but the same report fails with the below error message when VPD is checked.
Please share your thoughts on how to resolve the error. Your response is greatly appreciated.
This is the error message in the answers:
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 42015] Cannot function ship the following expression: Evaluate_Analytic( MIN(%1) OVER(PARTITION BY %2),([ D901.c3, D901.c4] )).Please have your System Administrator look at the log for more details on this error. (HY000)
This is in OBIEE 11.1.1.6 version. I haven't tested in old versions.
Regards,
Tom
Edited by: Tom Lype on Oct 1, 2012 2:17 PM

I found the solution myself. Hopefully it should help others.
If your fact table is within a data source object which has VPD enabled in the physical layer, all other tables(dimensions) mapped to it should be from a data source object which has VPD checked. I might be wrong but at least in my case after I copied over two tables from a data source (no VPD checked) into the new data source (VPD checked), my evaluate_analytic function is working with no errors. The parameters for the evaluate_analytic function are from those two tables.
Regards,
Tom

Close window not working when publishing as HTML5 on Adobe Connect using CP8

Hi all,
I'm trying to get a button that closes the project/window at the end of a video. I am using CP8.
I can get it to work when publishing as SWF to Adobe Captivate.
It also works when publishing as HTML5 but not on an LMS (Adobe Connect).
I have tried various methods including
- On success execute a Javascript = window.close()
- On success - exit
- On success execute advanced action = Assign cpCmdExit with 1
I also tried adjusting the slide settings On Exit: exit and the publishing settings Project End Options: Action: Close project.
Nothing works.
Any ideas?
Many thanks,
Aimee

Hi Aimee,
Can you test this to close the course window:
Insert 2 buttons or smart shape used as buttons (as Finish course buttons).
On the first button apply an action to execute javascript and in the script window, use this script: parent.close()
On the second button apply an action to execute javascript and in the script window, use this script: top.window.close()
Upload the published project on your LMS and check if any of these works for you.
Thanks
Himanshu

G505s - Touchpad hot key function not working with lenovo driver

I'm using windows 8.1, Lenovo G505s laptop. Recently I got replacement from Lenovo regarding touchpad after that this Fn(F7) touchpad enable/disable not working. This is happening only when I installied touchpad driver provided by lenovo and works well with standard microsoft driver (Ofcourse, no multigesture support with that driver).
We perfomed following operations:
1. HotKey mode enable/disable in BIOS
2.Reinstallation of OS
3. Reinstallation of driver(manually)
All cases with microsoft driver this function working but with touchpad driver it is not working. It's almost 90days (88thday) daily contacting both Lenovo customer support and service center people but no use.
If anybody having this problem and have a solution please share! (My machine under warranty!)

hi phani_kumar,
It's likely that you have a Synaptics driver (you can verify this by its hardware ID or use a utility software like AIDA 64 Extreme Edition).
- Link to picture (Synaptics)
- Link to picture (ELAN
If you're unable to install the driver below, can you follow this guide on how to disable driver signature enforcement then try to reinstall the driver again and observe if you can now toggle the Fn+F6.
Windows 8/7/XP/Vista 64/32-bit Edition v17.0.19
All Languages
118.1 MB zip
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Extract function not working with tag attributes

Hi all,
I have an xml document stored in the db as an xmlType. I am trying to use the extract function to retrieve values. The extract will work fine on tags without attributes. Any tags with attributes or tags beyond the tags with attributes will not be accessible.
<tag1>
<tag2>hi</tag2>
<tag3 att="hello">bye</tag3>
<tag4> hi again </tag4>
</tag1>
In the example above I can extract tag2 values but not tag3 or tag4 values.
here is my select statement
works
select e.xmlval.extract('/tag1/tag2').getStringval()
from test_xml e;
does not work
select e.xmlval.extract('/tag1/tag2/tag3').getStringval()
from test_xml e;
does not work
select e.xmlval.extract('/tag1/tag2/tag3/tag4').getStringval()
from test_xml e;
Any ideas?

Hi all,
Found the issue. The problem was that I was not specifying the second argument to the extract function.
The tag attribute that I was not handling was xmlns="".
I used this atttribute as the second argument in the extract function and now I am off and running.
Hope this helps someone.
Cheers

Netflix Instant Play will not work with Firefox but works fine with Internet Explorer

When I log in to Netflix, I cannot play instant movies from my Queue. I called Netflix and they said to reset my router. I did this and now Netflix Instant play works with Internet Explorer but not Firefox.

I am able to type a search word in but on clicking it, nothing changes. No results. the word just stays there.
I also downloaded the https://addons.mozilla.org/firefox/addon/live-http-headers/ -- at first I wondered if it was not letting me install. So I allowed it in exceptions. But I'm not clear on what it does or what I do to use it.

AS3 sound pause/play buttons not working

I have three buttons:play_btn, pause_btn; and stop_btn within a movie clip labeled controller.
I can't make the play button start where the pause button is left. Everytime, the sounds starts from the beginning.
Please help!
var mySoundReq65:URLRequest = new URLRequest("sounds/pronouns.mp3");
var mySound65:Sound = new Sound();
var mySoundChannel65:SoundChannel = new SoundChannel();
var lastPosition:uint= 0;
var isPlaying:Boolean = new Boolean();
var isPaused:Boolean= new Boolean();
mySound65.load(mySoundReq65);
controller.play_btn.addEventListener(MouseEvent. CLICK, playSound);
controller.pause_btn.addEventListener(MouseEvent. CLICK, pauseSound);
controller.stop_btn.addEventListener(MouseEvent. CLICK, stopSound);
// play sound
function playSound(event:MouseEvent): void{
if(!isPlaying){
mySoundChannel65 = mySound65.play();
if(isPaused) {
lastPosition=Math.floor(mySoundChannel65.position);
mySoundChannel65 = mySound65.play(lastPosition);
isPlaying=true;
// pause sound
function pauseSound(event:MouseEvent): void{
if(isPlaying)
lastPosition=Math.floor(mySoundChannel65.position);
mySoundChannel65.stop();
isPlaying=false;
isPaused=false;
else if (isPaused){
mySoundChannel65=mySound65.play();
isPlaying=true;
isPaused=false;
// stop sound
function stopSound(event:MouseEvent): void{
SoundMixer.stopAll();
lastPosition=0;
mySoundChannel65.stop();
isPlaying=false;
Thanks in advance for any help.

Kglad:
Thanks for replying again. I fixed my script and it's working fine now. The final script is as follows:
var mySound65:Sound = new Sound();
var mySoundChannel65:SoundChannel = new SoundChannel();
var lastPosition:Number= 0;
mySound65.load(new URLRequest("sounds/pronouns.mp3"));
var isPlaying:Boolean = new Boolean();
controller.play_btn.addEventListener(MouseEvent. CLICK, playSound);
controller.pause_btn.addEventListener(MouseEvent. CLICK, pauseSound);
controller.stop_btn.addEventListener(MouseEvent. CLICK, stopSound);
// play sound
function playSound(event:MouseEvent): void{
if(!isPlaying){
mySoundChannel65 = mySound65.play();
isPlaying=true;
if(lastPosition>0) {
mySoundChannel65 = mySound65.play(lastPosition);
controller.play_btn.visible=false;
controller.pause_btn.visible=true;
// pause sound
function pauseSound(event:MouseEvent): void{
lastPosition = mySoundChannel65.position;
mySoundChannel65.stop();
controller.play_btn.visible=true;
controller.pause_btn.visible=false;
// stop sound
function stopSound(event:MouseEvent): void{
SoundMixer.stopAll();
lastPosition=0;
mySoundChannel65.stop();
isPlaying=false;
controller.play_btn.visible=true;
I added a couple of things:
a) To avoid clicking the same button more than once, I made either pause or play button invisible.
b) The solution was to include the following conditional in the play button:
if(lastPosition>0) {
mySoundChannel65 = mySound65.play(lastPosition);
Thanks again!

Keyboard dictation function not working with wifi

very curious thing happening. the 'mic' icon activated dictation function
is not working in wifi mode on my iphone at home. you get the dancing
balls and no text ever appears. in 4g mode dictation works fine. wifi seems to be working
ok. dictation on my wifi only ipad is ok. only tried this at home but since
wifi seems to work ok i have no reason to believe
that wifi is the issue.

I tried rebooting mine twice and it didn't work. I disabled Siri, then enabled Siri and it worked temporarily. I had to repeat disable/enable of Siri serval times over the course of the day, seemingly at least an hour apart before it seemed to work. Even now there seems to be a bit of a lag between when I speak and when it types, but it does work finally.

Allowing the Pause / Play buttons to work with VLC player

I would like to use my pause / play buttons when I am using VLC player. I use VLC player to watch many movies, but I still use iTunes to play music, so I was wondering if there was a way to switch which application my play / pause button controls. Right now, even if VLC player is open it will only control iTunes.
Thanks,
Travis

Under VLC preferences look for the options "Control with media keys" and "...when VLC is in background".

Drag and drop interactivity- do it for me button not working when published to HTML5

I've made a drag & drop interactivity, I am adding a button where the user can get the correct answers for that interactivity.
using advance actions / Standard action / and apply custom effect (right to left ease) in captivate 7.
The problem I'm experiencing is that the button works fine when reviewing as SWF but when I publish as HTML5, it is not running.
I am attaching screen shots for it.
Thanks,

Sorry advance actions screen as below:
The idea when user click on "do it for me" button, drag source move to drop target automatically.
Thanks

WEBUTIL_HOST Function not works with Batchfiles

Hi
I try to call the WEBUTIL_HOST.host('c:\test.bat')
Function from Forms9i.
she’s don't work.
The DosBox hanging on without error
can help me somewhere?
Thanks Alfred

sorry, sorry it works ;-)
Forms has write the result of the DIR command to the server
the right code is
dir > c:\text.txt
with the next step i have a Problem
when i use the command PAUSE in the betchfile
test.bat:
echo on
pause
dir > c:\test.txt
webutil_host.host('cmd /c c:\test.bat');
The CMD-Box hangs on
reg. Alfred

Complete on Exit not working with publish to SCORM

I am trying to launch a captivate project straight through
our LMS, I have published it as a SCORM compliant file, and used
the manifest file as well. I am able to launch the project, and the
resume on exit works, however I cannot get the last page to exit
and complete the project... so in my LMS it still states "in
progress" when I have completed the education.
Help?!?

I had that problem once or twice before when using Captivate
to build the scorm manifest.
What I did to correct it was put the appropriate JavaScipt
command into the project end options.
If you go to Preferences - Project - Start and End - Project
End options you can define an "Execute JavaScript" when the project
end. There I would put my JavaScript command to send the completed
information to the LMS.
I used this in my project and that worked fine:
doSetValue("cmi.completion_status"',"completed")
Good luck,
Michael

Air play is not working with new OS X Mavericks

no airplay box in tool bar I just loaded new OS X Mavericks so cant connect to apple tv

Does your MacBook Pro meet the requirements:
AirPlay Mirroring
Requires a second-generation Apple TV or later. Supported by the following Mac models:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
Mac Pro (late 2013)

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

Pause/Play functionality not working with publish to HTML5

Similar Messages

Maybe you are looking for