Pause Time on Live and Recorded TV

Can anyone please tell me how long the pause live tv and the pause VOD times are? No one at Verizon support seems to know this answer and I have been told to contact Motorola for the answer.
If I was a car mechanic and someone asked me which way the tires rolled I wouldn't tell them to call Goodyear. Why doesn't anyone know this answer?

If I remember correctly DTV only held 30 minutes in their buffer. Don't remember if it would return to live TV at that point, or just drop the beginning of the buffer storage. Would be a nice feature for FIOS if it did work that way. Techman28 found the answer and it was not that difficult to time it out with a watch. I for one have paused something and had the TV restart before I was ready to go back and view it. Never know how long that call will take. Or pause the program to answer a posting only to have the program restart. These forums are a good place to find answers and get help. It may be that the people asked never actually looked into it, or had not been asked.
Message Edited by prisaz on 05-24-2009 09:37 AM

Similar Messages

Streaming Live and Recording at the same time

Currently I allow users to stream live Audio and Video and I would like to begin recording the Audio/Video at the same time.
The only way I can figure out streaming Live and Recording is to create two NetStreams and connect with the same NetConnection and have one netstream publish "live" and the other netstream publish "record". This just doesn't seem very efficient because it would be streaming the same thing twice to the FMS.
Is this the only way to go about this? or am I going the wrong way with this?

What you want to do is record to FMS. Then use NetStream.Play(filename, -1) to only play live.

[svn:osmf:] 14521: ChromeLibrary: moving live and recording buttons to the left hand side of the control bar , and making the button backdrops a little bigger.

Revision: 14521
Revision: 14521
Author:   [email protected]
Date:     2010-03-02 12:47:27 -0800 (Tue, 02 Mar 2010)
Log Message:
ChromeLibrary: moving live and recording buttons to the left hand side of the control bar, and making the button backdrops a little bigger.
Modified Paths:
    osmf/trunk/libs/ChromeLibrary/assets/control bar.ai
    osmf/trunk/libs/ChromeLibrary/assets/images/eject_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/fullScreenEnter_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/fullScreenLeave_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/live_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/live_down.png
    osmf/trunk/libs/ChromeLibrary/assets/images/live_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/minus_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/minus_down.png
    osmf/trunk/libs/ChromeLibrary/assets/images/minus_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/pause_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/play_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/plus_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/plus_down.png
    osmf/trunk/libs/ChromeLibrary/assets/images/plus_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_down.png
    osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/qualityManual_down.png
    osmf/trunk/libs/ChromeLibrary/assets/images/qualityManual_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/record_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/record_down.png
    osmf/trunk/libs/ChromeLibrary/assets/images/record_up.png
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/ControlBar.as

Revision: 14521
Revision: 14521
Author:   [email protected]
Date:     2010-03-02 12:47:27 -0800 (Tue, 02 Mar 2010)
Log Message:
ChromeLibrary: moving live and recording buttons to the left hand side of the control bar, and making the button backdrops a little bigger.
Modified Paths:
    osmf/trunk/libs/ChromeLibrary/assets/control bar.ai
    osmf/trunk/libs/ChromeLibrary/assets/images/eject_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/fullScreenEnter_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/fullScreenLeave_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/live_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/live_down.png
    osmf/trunk/libs/ChromeLibrary/assets/images/live_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/minus_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/minus_down.png
    osmf/trunk/libs/ChromeLibrary/assets/images/minus_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/pause_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/play_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/plus_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/plus_down.png
    osmf/trunk/libs/ChromeLibrary/assets/images/plus_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_down.png
    osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/qualityManual_down.png
    osmf/trunk/libs/ChromeLibrary/assets/images/qualityManual_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/record_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/record_down.png
    osmf/trunk/libs/ChromeLibrary/assets/images/record_up.png
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/ControlBar.as

Pixelation problems with Live and Recorded Viewing

I'm having massive pixelation when viewing live HD channels or viewing recorded HD shows. When watching live TV the problem is active when I turn on a 2nd TV. We had tech support out and the trouble shooting did not resolve the problem. They thought it was related to bandwith. I'm not well versed on the technology, and don't feel as if I need to understand why their product is not working as it should. I'm paying for a product that is not functioning. What do I need to do as a consumer to obtain the customer service that is expected from AT&T?

Call and schedule another tech visit...Or download the Hyatt app, login with your att email account/password, run the troubleshoot test. This runs 5 tests, any problems found with these will help create a service ticket, if receive a green check mark, no problem found within tests ran. As you report increased issue with two TVs on, I suspect your on coax with cable issue. Inside wiring issues are billable, minimum $99 labor plus $55 for each cable run.If coax cable, looking at ends (compressed not screw or from), cable itself should be RG 6 not RG59, old wall plates, splitter (should only be one, Holland brand). If replacing the physical connections do not work, actually cable bad (store bought, RG59) best to either install up to two wireless receivers (one time charge $49 each) or have tech replace coax with cat5 ($55 per line) Are other issues possible, yes... But coax best describe your issue....Other possibilities include flaky receiver (replace receiver), failing port on RG (replace RG), or other wiring issues outside or inside... Test at nid for errors, no errors at nid is inside wiring issue. Foreign voltage from TV (especially newer TV with amplifier) needing TV grounded requiring you to have grounded outlets (electrician job if not grounded), bad ac power, many use power strip that goes flaky replace the power strip or plug direct into wall outlet. As problem is listed as recent, something changed, what is question and who is responsible for repair (paying to fix). If can rule out inside (electric/cable runs your issue) then equipment and outside is company issue. Request another service call, a fresh set of eyes main reveal something previous tech missed.

Time shifting and record live stream

Hellow everyone,
I would like to stream videos for my viewers and them have a abiliti to timeshifting live stream.
Can I use live application for timeshifting? Or I should use livepkgr to do that.
For archive and play on the VOD mode I like to stream live and record at same time. in the livepkgr I see in the stream folder create a stream file with the f4f extention automaticaly whoever in the live application I should call application.record on the FMS to save live stream on the server.
Please advise me the better solution to archive and time shifting.
Many Thanks.

livepkgr application for for HTTP streaming...
f youjust want to stream over rtmp use live application and code to record the stream...recording is pretty simple in AMS just call Stream.get() s.record(...) s.play() where s is the stream which you are recording...
application.onPublish = function(clientObj, streamObj) { trace("recording started..."); var strName = "recorded_" + streamObj.name; var s = Stream.get(strName); if (s == undefined ) return; s.onStatus = function(info) { trace(info.code); } if (!s.record("record")) { s.trace("record failed."); } s.play(streamObj.name, -1, -1, true); }

Triggering and Recording for specific duration

Enclosed is the VI which I am using to trigger a electrical circuit for generating a spark.
My system is very simple wherein I am generating spark in a vessel (by a triggred electrical pulse to HV generator) and measuring the pressure and temperature for a specified time of X and Y seconds after the spark.
Part A:
On a single Boolean input (TRUE) I would like to have following:
1. The Trigger pulse (USB 6009 device) should start and last for say 1.5 sec. which is input to my electrical circuit. Two DAQ max is used since current from one port is not sufficient to trigger the HV generator - electrical circuit.
2. At the same time the pressure inside the vessel should be recorded for X sec. only (writing to file)
3. Simultaneously the temperature should also be recorded for Y sec. only (writing to file)
In the present VI, I have to keep the “Auto fire and record” button pressed to write the data to file. I have set up preset time for the trigger pulse.
After triggering and recording for specific time 1.5, X and Y sec. the Boolean should go to FALSE position since long duration pulse to electrical circuit can be damaging.
*** REQUEST SOME-ONE HELP ON THIS MATTER ASAP. ****
Part B:
Later I have to record the values of current and voltage measured at three locations by Tektronix TDS 3034B Scope (channel 1, 2 and 3) for a duration of 300 nano-seconds after the spark has occurred (i.e. say P sec. after trigger pulse and recording till P + 300 duration)
This simple logic seems to be more difficult than, I expected, can some one please help
/ suggest in the right direction. (**VI attached**)
Sorry for the language – New to Labview and not an electrical engineer. So pl. explain.
THANKS
Email: [email protected]

Hi xseadog,
Sincere apologies for inordinate delay in reply.
Was blocked up with actually setting up the experiment in physical sense. Keeping all the bits and pieces in right place.
The pressure sensor / transducer is Omega PX219 with output 0 – 5 V. Recording pressure reading every 0.001sec. immediately after the spark trigger (USB 6009 signal) is switched ON. (through labview)
The temperature is K type thermocouple. Recording temp every 1/12 sec.(0.0833 sec) after spark.
I have made a provision to trigger the spark manually – through push button. But this mode requires me to start recording press and temp., before pushing the button to generate spark. Hence keen on using the trigger initiated through Labview.
Regarding relay controlled by the 6009, I understand that circuit is similar to that. The HV is generated through an EHT pulse generator, which is ready now, the only thing is it requires a trigger of 5 V and more than 10 mA.
Manually when we generate spark, we do not require the USB 6009, so we get spark every time when button is pushed, it was only during the Labview trigging we diagnose this prob. And hence clubbed the two channels of 6009.
As of now the loop time “Auto fire and record” which is the key for firing –spark generation –runs every 1.011 sec. can you suggest, how to reduce the loop time ?.
Does the DAQ’s consumes time or which step consumes more time. I would request your comments.
Thanks for the continuous help / replies.
nnnsh

I just bought a docking station for my iPad so I could plug into a mixing board and record a live show. I was disappointed at the time limitation for the recordings. What is the maximum amount you can record a song into GB for the iPad?

I purchased a docking station for my iPad so that I could record a live recording of my band directly from a mixing board this weekend using GarageBand. Unfortunately, I was unaware of the song length limitations of the iPad version of this program. Basically, was unable to capture more than 15 minutes of the gig. I've read other conversations on this forum and can't really determine the maximum amount of time this application can record. Can anyone tell me how long GarageBand for ipad can record at one single time and how to adjust the settings to achieve this? Also, is anyone aware of any other apps than could be used to record a longer please share. Thanks.
CP

I received an email reply from George, the Founder and CEO of Studiomini, he indicated to me that their app does not have any time limitations in regards to recording like GB does, you are only limited by the amount of free space on your iPad. Fo what it's worth, I think the Alesis IO Dock is an amazing piece of equipment. I would highly recommend purchasing the IO Dock and plugging your mixing board into the dock to capture your rehearsal. Hopefully the feedback I received from Studiomini is accurate and I can capture my entire rehearsal at one time. I hope this feedback helps. One last note, apparently their will be a update soon to view Studiomni in the landscape view on the iPad instead of just the portrait view.

How do you watch and record a live h.264 stream at the same time using fmis and FMLE?

I've read all the similar post but could not find a solution that actually works, and please no "just use the dvr or record on the FMLE suggestions" as neither will work for me.
Some posts I've read suggest naming the stream in the FMLE to something like mp4:mystream.mp4 or mp4:mystream.f4v but then you can no longer view the stream, and according my the admin console the stream will not even publish using this syntax.
I can view the published stream if I name the FMLE stream to something like mystream.mp4 or just mystream, but then it doesn't record at all or records as a FLV file depending on how I code the main.asc file.
Here's one version of my main.asc, this one correctly publishes the live stream after the client triggers the joinStreams function but will not record it.
application.onConnect = function (client, userType)
    trace("userType is " + userType);
    this.acceptConnection(client);
    //this.clientCount++;
    client.joinStreams = function (channel)
        trace("joinStreams on channel " + channel);
        liveVid = Stream.get("livevideo/" + channel + ".mp4");
        liveVid.play("hdvideo/" + channel, -1, -1);
        liveVid.record("append");
    client.clearStream = function (channel)
        trace("clearStream on channel " + channel);
        liveVid = Stream.get("livevideo/" + channel + ".mp4");
        liveVid.play(false);
        delete liveVid;
I've been working on this for 48 hours straight, please advise.

I think lets keep it simple, will explain what you have for watching live streams and recorded streams
Live Publish and Play:
     FMLE Settings:
Video Codec: H.264
Audio Codec:<any of your choice>
Server URI : Please put your server uri with application name here , for example i will use "rtmp://myServer/myApp"
Stream name: livestream
    Subscriber Settings:
          Server URI : "rtmp://myServer/myApp"          Stream name: livestream
          Mode: "live" ( i.e. ns.play("livestream",-1,-1,true)
Playing VOD H.264 file:
     Subscriber settings:
          Server URI : "rtmp://myServer/myApp"
          Stream name: if file name is "sample", use "mp4:sample", if file name is sample.f4v, use "mp4:sample.f4v"
          Mode: "record" ( i.e. ns.play("mp4:sample.f4v",0,-1,true)
For DVR (Record-in-progress stream)
If you are using FMLE and want to use "Record" option of FMLE then you need to have to dvrcast_origin application and subscrier needs to FLVPlayback 2.5 component
If you want to use that option, do let me know i will give details later.
For now we will use simple server-side code and FMLE as publisher.
main.asc of "myApp"
application.onPublish = function(myclient,mystream){
     mystream.record();
application.onUnpublish = function(myclient,mystream){
     mystream.record(false);
FMLE Settings:
Video Codec: H.264
Audio Codec:<any of your choice>
Server URI : Please put your server uri with application name here , for example i will use "rtmp://myServer/myApp"
Stream name: mp4:mydvrstream.f4v
    Subscriber Settings:
          Server URI : "rtmp://myServer/myApp"          Stream name: mp4:mydvrstream.f4v
          Mode: "live" ( i.e. ns.play(" mp4:mydvrstream.f4v",0,-1,true)
Try out above and let me know if that works or does not work for you.

Can I capture and record live feed on "Final Cut Pro X"?

I am an intern at my church and we are wanting to finish upgrading everything to mac at the church but we are needing a program that can capture live feed and later edit it so that I can create TV programs; hence, why I am needing to know can Final Cut Pro X capture live feed and record it? Along with that I need to know can I import avi. video files into Final Cut Pro X and it still allow me to edit them for our TV program? Thank you ahead of time for all of your help. Right now we are capturing in SD and I need to make sure it will also not be a problem capturing in SD and will make a smooth transition when we go to HD.

See here:
Re: import live video hvr v1e
The above discusses HDV over firewire which is high def, DV will be the same deal.
So it depends on what type of camera you are going to use.
If you jump to an AVCHD USB cam the game changes.
So far I'm not aware of a direct import method.
There are workarounds with additional equipment at present.
Al

Can Express 9 play and record multiple instruments at the same time?

I have logic express 9 and was told with my interface that I can play and record different instruments at the same time on Express 9. Is this true because I have spent a long time trying to figure out how.

Hi,
to record multiple Inputs at a time, open up the appropriate number of audio tracks. Now for each track, select the correct Input in the Channelstrip.
Now, ARM all these tracks for recording by clicking the little red R in the track header or channelstrip. Now if you hit record, all these tracks should record simultaneously their respective inputs.
All other existing tracks should playback while recording.
Fox

I can't seem to get GB to recognize my Behringer X1222 USB Mixer. It will record, but shouldn't I be able to see and/or select which input channel(s) that I will record from? Can I record more than one channel at a time, and record multi tracks?

I can't seem to get GarageBand to recognize my Behringer X1222 USB Mixer. It will record, but only on the generic "USB Input, without seeing or letting me select the input channel from the mixer. Can't find any drivers from Behringer. How do I getGB to "see" the mixer? Thanks, I'm a newbie to Macs in genreal, and recording...

viiram wrote:
It will record, but only on the generic "USB Input, without seeing or letting me select the input channel from the mixer.
the x1222 includes a 2 channel audio interface, 2 channels are all you can get from it.
the most you can do is record to 2 tracks at a time; skim this tute to see how:
http://www.bulletsandbones.com/GB/Tutorials.html#allaboutrecording2tracks
(Let the page FULLY load. The link to your answer is at the top of your screen)

How can i use in the same time input line and mic to recorder in several track whit SONAR

I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
Thank you. Sorry for my english

LIMACAR wrote:
How can i use in the same time input line and mic to recorder in several track whit SONAR 4. I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
Thank you. Sorry for my english
Depending on which soundcard you have there, but if your card is capable for
ASIO -> activate I/O drivers on Sonar/Options/Audio/Drivers -tab (mic/line sources should be listed there --> activate) and select the mic or/and Line sources on tracks "I" - dialog
WDM/KS -> use the Surround Mixer or windows recording controls for recording source selection (mic should be listed there)
MME32 - > same w/ WDM/KS
If you use Asio4All --> same w/ WDM/KS & MME32
No mic and line source simultaenously w/ WDM/KS and MME32.
You perhaps be able to do this w/ kX drivers.
jutapa
ADDED:
You can also install modded version of Audigy 2 drivers/software but I have never done this w/ Li've! 5. so I can't be sure if you get ASIO support for your card.
Here are the instruction --> http://www.tech-pc.co.uk/audigy-2.php
jutapaMessage Edited by jutapa on 05-25-2006 02:48 PM

Start recording video at a set time of day and off at a set time of day, and or can start rec video when motion detected, till no motion detected for a set period

is there an app for iphone which can be set to start recording video at a set time of day and off at a set time of day, and or can start rec video when motion detected, till no motion detected for a set period. basically someone is vandalising my vehicle and i really really want to catch the mongrel
thanks for any suggestions

Nope.

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. How do I get it to stop?

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. What is causing it and how do I get it to stop? My sound is running through the Saffire Pro 40 Interface (Focusrite) into external speakers with powered amps.
Also, When I record I am hearing little pops in the system. I have checked all of my meters and they are not clipping. What is causing it and how do I get it to stop?
Ken

MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter-

Can't watch a programme and record at the same time.

I rang Sky who say it's nothing to do with them. Gave me Lovedigital number. Rang them they said contact my landlord. Rang Bristol City Council, they say it's nothing to do with them.

What I meant is the number of cables going into your Sky box. If there is only one cable going to your Sky box, that answers the question of why you can't watch one thing and record another at the same time - your Sky + box would require two inputs to do that. From what you've said it sounds like a communal dish set up. If that is right then whoever looks after that are the people you need to contact to see about the possibility of getting a double feed into your home.

Pause Time on Live and Recorded TV

Similar Messages

Maybe you are looking for