Pause Video on Page Load

I am not able to pause video on page load in Oracle webcenter.I used HTML markup to embed a video.Any Help?
Urgent.

Try checking the html ebed code for your flash flv and look
in the flash vars line and make sure it reads something like
autoPlay=false. Check the entire code and change all of the
autoPlays to false... See if that works for you.

Similar Messages

  • Pause videos on page load

    Hello,
    I have 3 videos I need to put on one HTML page (and I am
    completely new to Flash). Therefore, they need to be paused on
    start. I am using a Flash CS2 Pro and I have checked the box that
    allows "paused at start" in the HTML tab for publish settings, but
    it is not working for me. Any ideas on how I can make this work?
    Thank you so much!
    Fiona

    Try checking the html ebed code for your flash flv and look
    in the flash vars line and make sure it reads something like
    autoPlay=false. Check the entire code and change all of the
    autoPlays to false... See if that works for you.

  • Delay in playing embedded video on page load – DPS

    Hi
    I've created some DPS pages with embedded video content that plays on page load but there is a slight delay causing the page below to be exposed which in turn creates a jump between the underlying page and the loading video.
    The video should load, play then disappear revealing the native InDesign page which also is a crisp version of the last frame of the video that has ended.
    I don't use a poster image because it renders at a low resolution and is not as crisp as the vector based text below in the native InDesign page.
    The page below is what is shown once the video has finished and closed down.
    This delay causes a glitch which ruins the fluidity of an otherwise nice looking page.
    I'm trying to re-create something along the same lines as the "Martha Stewart Living magazine" video front cover which is seamless and very slick.
    Do you know how I can achieve this without the slow loading vid and help make the effect smoother.
    Thank you in advance, I look forward to your reply.

    From your description it sounds like you are trying to trigger auto-play using Media panel. For DPS you need to set the behaviour in the Folio Overlays panel. Click on the video, open the Folio Overlay panel, and check the Auto-play setting. If you are doing this as a cover you probably also want to enable "do not allow pause".
    Neil

  • Video won't pause on html page load

    Hi, can anyone help me out? I placed an flv file in blank
    flash file. then I went to publish it, but when it loads (the html
    page its published) it auto plays the flash video. even though I
    select "paused at start" tick box in the HTML publish settings box.
    any ideas why?

    Hi murphy14,
    Was the video purchased from the iTunes Store?
    If it was contact the iTunes Store support from here: http://www.apple.com/support/itunes/store/browser/
    If it was not, make sure the video is in a supported format or convert it.
    The iPod touch supports the following video formats:
    +"H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; H.264 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Baseline Profile up to Level 3.0 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats"+
    from http://www.apple.com/ipodtouch/specs.html
    This article: http://support.apple.com/kb/HT1211 will walk you through converting a video file in iTunes. iTunes will convert many video formats but the video may have to be converted with a 3rd-party utility.
    -Jason

  • Safari "Pauses" During Web Page Load

    This is a tough one. I'm having a problem where Safari will partially load a page, any page, then pause for up to 30 seconds, and either load the rest of the page or show "?" in a bunch of places and load the page incorrectly. I can't find anything wrong with my internet connection, router, or anything. ISP insists it's a software issue. This issue does not manifest in Camino or Firefox. Installed Safari 4 Beta and it did not fix the issue. Uninstalled Safari 4 and it did not fix the issue. Any ideas?

    I have some more information.
    I did a trace on my network to see if there are any problems. I traced to http://www.msnbc.com. Everything seems normal until hop 15 or 16. That is where I get the following:
    15 ten3-4.cpk-76c-1b.ntwk.msn.net (207.46.34.118) 116.777 ms 150.908 ms 200.162 ms
    16 10.22.0.6 (10.22.0.6) 109.696 ms 109.311 ms 109.635 ms
    17 * * *
    18 * * *
    19 * * *
    20 * * *
    21 * * *
    22 * * *
    23 * * *
    24 * * *
    25 * * *
    26 * * *
    27 * * *
    28 * * *
    29 * * 10.22.0.6 (10.22.0.6) 110.254 ms !X
    30 * * *
    31 * * *
    32 10.22.0.6 (10.22.0.6) 110.023 ms !X * *
    33 * 10.22.0.6 (10.22.0.6) 110.237 ms !X *
    34 * * *
    35 * * *
    36 * * *
    37 * * *
    38 * * *
    39 * * *
    40 * * *
    41 * * *
    42 * * *
    43 * * *
    44 * * *
    45 * * *
    46 * 10.22.0.2 (10.22.0.2) 110.650 ms !X *
    47 * * 10.22.0.2 (10.22.0.2) 113.808 ms !X
    48 * * *
    49 * * *
    50 * * *
    51 * * 10.22.0.2 (10.22.0.2) 110.234 ms !X
    52 * * *
    53 * * *
    54 * * *
    55 * * *
    56 * * *
    57 * * *
    58 * 10.22.0.6 (10.22.0.6) 109.707 ms !X *
    59 * * *
    60 * * 10.22.0.6 (10.22.0.6) 109.721 ms !X
    61 * * *
    62 * * *
    63 10.22.0.2 (10.22.0.2) 110.117 ms !X *
    Can anyone decipher this for me?

  • Still pausing and slow to load pages

    I've upgraded to Safari 3.1.1, but I still get long (many second) pauses as pages load. It can take 20-40 seconds to load up the home page for a site like www.imdb.com, 20 seconds for CNN, etc. The blue progress bar will just pause for long periods before finally finishing.
    My system is a Mac Pro on a cable modem. I've reset Safari completely with little or no affect to the loading time. And I don't have any problems with the speed of downloading files, interacting with iTunes, or any other network applications.
    I also have a Windows laptop, and I have no problem loading web pages in IE. It's only Safari on the Mac that is slow.
    Is there any way to somehow monitor what the program is doing during the apparent pauses?
    Any other ideas?
    Thanks!

    Here's another post from the guy who had the DNS server code solution. This is for 10.4 (Tiger)
    Network panel in Tiger is different than Leopard.
    Follow these directions:
    -Location - set up a personal location by clicking on the location drop down menu and selecting "add a location". Use a name familiar to you. Once established, select "apply".
    -Next, click on the "Show" drop down menu and select Network Port Configurations. Depending on whether you use Ethernet or Airport (wireless) for your setup: Only Ethernet or Airport ought to be checked. Move it to the top of the list (you can drag it). Select "apply". Everything else ought to be unchecked unless you use a Bluetooth device.
    -Back to the "Show" menu, select either "Ethernet" or "Airport" (whichever applies to you). Click on the TCP panel. There, if you live outside the US enter 208.67.222.220 and 208.67.220.222 (separate lines) in the DNS servers box - these are Opensource DNS codes. and select "apply". If you live in the US use Verizon's 4.2.2.1 and 4.2.2.2 public codes instead of the OpenDNS codes.

  • How can I get a video clup to load last on my page?

    Since the entire page is trying to load at once, the quicktime file slows up everything else. If I set it to autoplay it will start playing before the page finishes loading...
    Is there a way I can go into the html file and change the order of how things load and make the video clip load last? thanks
    you can check out my site at:
    http://PrimitiveGroove.com
    thank you!
    Hunter S.

    well, it finishes loading last... b/c it is the biggest file. On some of my other pages the video is 8meg-12meg big and really slows up the load time.
    I have no problem with the length of time that it take the video to load, I just want it to load last so that the rest of the page loads first... As the large quicktime file slows up the loading of the entire page..
    What happens is that on autoplay it starts to play before the rest of the page is finished loading and looks crummy with all the lame iweb graphic squares on the page as it plays.
    So once again is there a way to get it to load last?

  • W550s: slow web page loading - video problem?

    My system:Thinkpad W550s with the 2880x1620 px Display.CPU:      i7 - 5500URAM: 8 GBSystem: Win 7 64 bitDrives:  system 256GB m.2 SSD This problem seems to be Lenovo video display, not the web browser or the internet connection: I see the same slugish page loading with Chrome and Firefox; I see the same problem with WiFi or wired ethernet. No other computers at my house have this problem. Specifically, I display Zillow in web browser. Choose a search option that displays hundreds of homes within the map. Zoom in or zoom out. Zillow redraws the entire map, and it is very slow on my W550s (sometimes 2 seconds or more). Other computers will refresh in a few blinks of the eye. I have not used the computer enough to say if I'm also seeing video display problems. There is a slow video on W550s topic in the forum, too.. I haven't yet tried some of the (unsuccssful) steps recommended there. 

    Occasionally I see it reach 100% when doing nothing but browsing! So what does that mean to you? The observed sluggishness seems very real, but I have a hard time quantifying it. My desktop system (older AMD CPU, 8 GB RAM, HD, not SSD) is definitely snappier. The graphics card on the desktop system is nothing special - some nVidia $50 card. Again, in the not quantifiable category, a friend recently brought an older Dell XPS laptop to my home that I had gifted to her. It is from 2007, runs Windows Vista (yikes!) and only has 4 GB RAM, yet it definitely felt faster with Firefox. It even seemed to load Firefox and IE quicker! This is really disheartening. I should load Adobe Lightroom on it and see how that runs.

  • Embedding video in a dinamic page loaded using ajax

    I've been trying to do this for some days now, and still couldnt find a solution.. this is the story:
    I need to embed a movie (.mov, mp4, m4v) in a dynamic page loaded by an ajax call, i followed the recommendations specified in apple's page so i can monitor progress, and listen DOM events:
    QuickTime and JavaScript
    on Firefox, everything works very well, i can monitor progress, listen events, etc.. etc... (this app is intended to be multi browser)
    On the contrary, IE is driving me crazy, it does not do anything.
    So to debug this i did the following (for IE):
    i tried then, creating a simple STATIC page in my computer, that loads the movie, and listens to its events, it worked good.
    Then i put that html file in a web server, and every "first time" that i open the page, it wont work at all. After a reload, it will work good.
    Then i created a simple page with an ajax call that will insert the html embedding the movie, and again it wont work in IE.
    I want to be able to listen DOM events in IE in a dynamic page
    Please help me with this.
    <Edited by Moderator>

    I've been fighting this last couple days as well.
    Somehow the dom events are not fired
    –in win explorer that is– when the movie is
    inserted after the document loaded.
    I've been trying many variation to get it to
    work and just found a hackish way:
    After you have added the movie via javascript
    use the movie.SetURL('/movie.mov') function
    and then the RegisterListener() function.
    This enabled the Dom event for me.
    Additionally you can use
    movie.SetResetPropertiesOnReload(false) to
    keep the movie properties.
    function insertMov() {
    var embtxt = QTGenerateOBJECTTextXHTML("../movies/main.mov",
    477,
    268,
    'obj#id', 'mainobjId12',
    'emb#id', 'mainembId12',
    'emb#name', 'mainembName12',
    'EnableJavaScript', 'True',
    'postdomevents', 'True',
    'autoplay', 'False',
    'controller', 'False'
    var mov_container = document.getElementById('mov_container');
    mov_container.innerHTML= embtxt;
    setTimeout('reg()',100);
    function reg(){
    document.getElementById('mainobjId12').SetResetPropertiesOnReload(false)
    document.getElementById('mainobjId12').SetURL("../movies/main.mov");
    RegisterListener('qt_canplaythrough', 'mainobjId12', 'mainembId12', aallrrtt);
    function aallrrtt(){
    alert('qt_canplaythrough');
    }

  • My video won't load, and I keep refreshing the page but it still shows the loading sign

    my screen won't play my video it just loads i tried turning off my computer and turning it back on bus still nothing happened

    Hello,
    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Click the menu button [[Image:New Fx Menu]], choose History, and then Clear Recent History....
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • Since Thunderbird attempted to load the newest version, nothing loads. Video won't load, pages take forever. How do I fix this?

    A pop up asked if I wanted to install the latest version of Thunderbird. I clicked yes, and nothing has worked since. Videos won't load, sites take forever to load if they do at all. I clicked on Thunderbird 'about' and it showed it was attempting to load verision 12.1. My last version was 3.1. I deleted the Thunderbird application and installed a 3.1 version I had backed up. Everything is still not working right.
    How do I fix this?

    Thanks Zenos. I have an iMac OS10.6.8 When Thunderbird was installing the latest version is when this problem started. And the problem IS with my browser. I realized the problem started when I said 'yes' to installing the latest version. When I checked preferences I noticed Thunderbird was attempting to load version 12.1 It had been running for days and only 159 kbs had loaded . I didn't know how to stop it, so I just trashed the Thunderbird app, but that didn't help. I'm not very techy to say the least, but it seems like there might still be something running in the background that is slowing up everything else on my computer. Anyone have any ideas?
    Thanks for the reply.

  • FireFox isn't working right on my Mac. Sometimes it won't load at all( says server not found) and sometimes pics and video won't load. If I switch to IE or safari it works fine.

    I just got a Mac ( I have always had a pc) and I loaded the most update version of Firefox on it. Many times during the day I will go to a website and it will get a "Server not found" message. I can't refresh the page and fix it, but if I go to IE or Safari the webpage shows up fine. It's not just the webpage cause it is never the same one and it can happen to any site. Also when using Firefox there are many times when I go to a page and not all the pics load or if there is a video on the page the video doesn't load. Again if I then go to IE or safari everything is there and works fine. I have uninstalled and reinstalled FireFox and nothing changed. I cleared my cache, cookie, history and still nothing. I love firefox so this is really frustrating. Any help please.

    Did you ever fix this, because I am having the same problem

  • I have now purchased easy a twice which has cost me 14 pounds both times the video has not loaded i has come up with "!" its asking e to locate the file and i have tried to i typed in easy a on finder and spotlight and it hasn't come please help

    i have now purchased easy a twice which has cost me 14 pounds both times the video has not loaded i has come up with "!" its asking e to locate the file and i have tried to i typed in easy a on finder and spotlight and it hasn't come please help

    Janieburmy,
    You can always deauthorize all your machines from your store account page — just log in and view your account settings and there's a button to deauth all your machines. Which just means for the other machines, it will ask you for your store ID / password the next time you play a purchased song.
    So, let's try the filter experiment.
    On the start menu, click on "run". in the space it provides enter "regedit" without the quotes. This will open the registry editor.
    Find the heading HKEYLOCALMACHINE. Click on it.
    Find the heading SYSTEM inside it. Click on it.
    Find the heading CurrentControlSet. Click
    Find the heading Control. Click
    Find the heading Class. Click
    Find the heading that begins {4D36E965- Click
    Go up to the Registry menu and select "Export Registry File... command. Make sure the "Selected Branch" radio button is checked and save that off somewhere that you can find it.
    Delete the key named LowerFilter.
    Select the key named UpperFilter, right click, select "modify". Then edit the text in the dialog to just say "GEARAspiWDM" followed by hitting the return key, the return after the word is important.
    Then reboot, and see what iTunes does.
    To get the system back to its previous state. Run Regedit again and use the Registry menu -> Import Registry File... command and select the file that you saved off in the first section.
    I'm particularly interested in getting rid of the "AFS2K" driver in the chain — that's a old driver from a company that hasn't existed in years.
    To answer your last question, why am I doing this?... I'm paying off a karmic debt. And someday we'll start that Tequila for Toonz paypal account and then I'll be set.

  • How to do a video gallery page

    Hi everyone
    when you create a new page iWeb lets you choose from some preset pages like the homepage, the blog, the video and the photo gallery.
    But the video page lets you put one or more videos in just one page.
    If you have many videos and you want to divide them in different categories like the photo gallery page do for photos, how can you do it?
    If you select the photo gallery and if you put videos instead of photos from your iTunes inside of it, it seems to do the job, but I can't use this trick cause I have not enough hosting space to store the videos, and infact I uploaded them in youtube and with the youtube widget the photo gallery doesn't work and shows nothing...
    Did someone know how to create a video gallery page (or something like that) with videos from youtube?
    Thanks
    Message was edited by: PaoloPhino

    This is one way you could do it: PhotoPresenter Animated Slideshow Themes. The thumbnails can be as small as you'd like. This way none of the video files have to load before they play button is selected. Otherwise the page would take forever to load.
    How the button is created is described in this demo page: Opening Item in a New, Precisely Sized Window
    OR you could use a video jutebox like the one on this page: http://www.holyredeemernorthbend.org/HRWeb/Our_Videos.html.
    His tutorial on how to implement it is here: http://www.holyredeemernorthbend.org/HRWeb/jukebox.html.
    OT

  • Is there a reason why this video won't load/play ?

    I use a Macbook OSX 10.4.11 and Safari 3.1.2 All apple updates installed.
    I want to watch this short football video but when the page loads all the vid screen shows is a black square for a second and then just white. There is no picture or sound at all. Now is it that the vid is not compatible with Safari/Mac or am I missing a plug-in ?
    Have Flash, Quicktime, realplayer andWin4Mac installed, do I need something else ?
    This is the vid link.
    http://www.football.virginmedia.com/page/leaguetwovideo/0,,12555~1386640,00.html
    Cheers and Thanks
    4jbl7

    Sorry, I got the name wrong in the original message, I have Flip4mac installed.
    I think that there must be some sort of conflict between the settings/preferences for the different players. I will have to swop and change and see what happens.
    Cheers and thanks
    4jbl7

Maybe you are looking for