Paused programmes going to live tv when unpaused

I was one of the many who was having the problems with recording programmes (only the first couple of minutes recording). However, the recent fix has sorted that but I'm still having problems with live tv. If I'm watching a programme and want to pause it, when I return and press play, the programme skips to live tv instead of continuing to play from the point it was paused. I can "rewind" it to the point it was paused so the data is still there but the skipping is irritating.
Any thoughts?
UPDATE - It's not always going keeping the paused part of the programme. I've just paused a prog for about 30 mins and when I pressed play again, it played about 3 mins of the paused programme and the jumped to live. EVEN MORE IRRITATING!

Look at this link:
https://community.youview.com/youview/topics/automatic-software-update-for-february-2015
If my post has been useful, please click on the Ratings star on the left-hand side of the post.

Similar Messages

  • HT2729 I have limited space on my new ipad. How can I limit the number of songs from my itunes on my imac from going to my ipad when I connect the two?

    I have limited space on my new ipad. How can I limit the number of songs from my itunes on my imac from going to my ipad when I connect the two?

    you can do this by keeping the external hard drive connected and doing the following
    -hold shift key down on computer while opening iTunes and a prompt will appear to choose a library
    -select choose library, iTunes should bring up your explorer windows where you can search for the external HD
    -after you find the external HD find the iTunes folder you just copied to it
    -after opening the iTunes folder look for the file that says iTunes library.itl or if you can't see that extenstion just look for a document looking thing in the iTunes folder that shows up as a database file
    -double click the database file and boom iTunes should load your library without having to copy it to the computer
    PS: do make sure that if you are going to do it this way, make sure that the external HD is connected at all times, because if you don't then you will get exclamation marks next to your iTunes songs
    double PS: if you are unsure how to find out if the iTunes library file is a database file just right click it and choose properties and under the type it should say database file
    hope this helps:)

  • Is there a way to create a printable version of my iWeb built website before it goes offline in June when apple stops supporting mobileme?

    Is there a way to create a printable version of my iWeb built website before it goes offline in June when Apple stops supporting mobileme?

    Why not move your site to a new host and publish using one the two alternative methods...
    http://www.iwebformusicians.com/iWeb/Publish-Website.html
    http://www.iwebformusicians.com/iWeb/Website-Hosting.html

  • Server goes out of memory when annotating TIFF File. Help with Tiled Images

    I am new to JAI and have a problem with the system going out of memory
    Objective:
    1)Load up a TIFF file (each approx 5- 8 MB when compressed with CCITT.6 compression)
    2)Annotate image (consider it as a simple drawString with the Graphics2D object of the RenderedImage)
    3)Send it to the servlet outputStream
    Problem:
    Server goes out of memory when 5 threads try to access it concurrently
    Runtime conditions:
    VM param set to -Xmx1024m
    Observation
    Writing the files takes a lot of time when compared to reading the files
    Some more information
    1)I need to do the annotating at a pre-defined specific positions on the images(ex: in the first quadrant, or may be in the second quadrant).
    2)I know that using the TiledImage class its possible to load up a portion of the image and process it.
    Things I need help with:
    I do not know how to send the whole file back to servlet output stream after annotating a tile of the image.
    If write the tiled image back to a file, or to the outputstream, it gives me only the portion of the tile I read in and watermarked, not the whole image file
    I have attached the code I use when I load up the whole image
    Could somebody please help with the TiledImage solution?
    Thx
    public void annotateFile(File file, String wText, OutputStream out, AnnotationParameter param) throws Throwable {
    ImageReader imgReader = null;
    ImageWriter imgWriter = null;
    TiledImage in_image = null, out_image = null;
    IIOMetadata metadata = null;
    ImageOutputStream ios = null;
    try {
    Iterator readIter = ImageIO.getImageReadersBySuffix("tif");
    imgReader = (ImageReader) readIter.next();
    imgReader.setInput(ImageIO.createImageInputStream(file));
    metadata = imgReader.getImageMetadata(0);
    in_image = new TiledImage(JAI.create("fileload", file.getPath()), true);
    System.out.println("Image Read!");
    Annotater annotater = new Annotater(in_image);
    out_image = annotater.annotate(wText, param);
    Iterator writeIter = ImageIO.getImageWritersBySuffix("tif");
    if (writeIter.hasNext()) {
    imgWriter = (ImageWriter) writeIter.next();
    ios = ImageIO.createImageOutputStream(out);
    imgWriter.setOutput(ios);
    ImageWriteParam iwparam = imgWriter.getDefaultWriteParam();
    if (iwparam instanceof TIFFImageWriteParam) {
    iwparam.setCompressionMode(ImageWriteParam.MODE_EXPLICIT);
    TIFFDirectory dir = (TIFFDirectory) out_image.getProperty("tiff_directory");
    double compressionParam = dir.getFieldAsDouble(BaselineTIFFTagSet.TAG_COMPRESSION);
    setTIFFCompression(iwparam, (int) compressionParam);
    else {
    iwparam.setCompressionMode(ImageWriteParam.MODE_COPY_FROM_METADATA);
    System.out.println("Trying to write Image ....");
    imgWriter.write(null, new IIOImage(out_image, null, metadata), iwparam);
    System.out.println("Image written....");
    finally {
    if (imgWriter != null)
    imgWriter.dispose();
    if (imgReader != null)
    imgReader.dispose();
    if (ios != null) {
    ios.flush();
    ios.close();
    }

    user8684061 wrote:
    U are right, SGA is too large for my server.
    I guess oracle set SGA automaticlly while i choose default installion , but ,why SGA would be so big? Is oracle not smart enough ?Default database configuration is going to reserve 40% of physical memory for SGA for an instance, which you as a user can always change. I don't see anything wrong with that to say Oracle is not smart.
    If i don't disincrease SGA, but increase max-shm-memory, would it work?This needs support from the CPU architecture (32 bit or 64 bit) and the kernel as well. Read more about the huge pages.

  • Hellow my i pod is not working.actually bettry was too low then i puted on charging.it starting charging but not going to power on.when it tried to starting on sunndly after the apple logo it showd the 5 % bettry and went back off and this proses is carry

    hellow
    my i pod is not working.actually bettry was too low then i puted on charging.it starting charging but not going to power on.when it tried to starting on sunndly after the apple logo it showd the 5 % bettry and went back off and this proses is carry on.plz help me how it witt work starting.i urgently need to on my i pod.plz help me plzzzzzzzzzzzzzzzz

    Hi there shehla sattar,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iPad: Basic troubleshooting
    http://support.apple.com/kb/ts3274
    -Griff W.

  • My new Mac Air continues to disconnect from WiFi after going to sleep.  When waking it up I have to manually re-connect.  How do I keep it connected?

    My new Mac Air continues to disconnect from WiFi after going to sleep.  When waking it up I have to manually re-connect.  How do I keep it connected?

    I had this problem too and solved it by doing a clean install. After that it was gone.
    This is a drastic method since it takes quite some time to reinstall lion and all your software.
    Thoughts I had why it started working after a clean install are the following:
    It looked like the airport wasn't able to reconnect fast enough before the connection timed out. So what could have prevented my mac from being able to connect fast enough?
    Apps that consume processor cycles. I love what I would call 'System Enhancers', little apps that enhance my workflow (Moom, Alfred, Dropbox, Default Folder etc). I'm not saying that these are the problem, they might be programmed processor friendly, but check if you have apps that consume processor cylcles. It might prevent airport from being able to reconnect quickly enough before it times out.
    Mobile Config profiles. Another thought I had was that I had a mobile config 802.1X profile installed for the company were I worked. It used TTLS to connect to the corporate network. This profile might have gotten in the way.
    And a sidenote...
    Routers with hardware acceleration might also be a problem. My router is a Wireless Gigabit Router 300N WL-351 and has hardware acceleration. As soon as I activate that my wifi connection keeps dropping. It is as if a Macbook Air can't handle that amount of optimisation.
    That's it, hope it helps those who are still having the problem.
    Best, Jan

  • TS1591 My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.

    My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.Help please!

    Hello chindeepchow,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694#3000
    Resolve communication issues
    Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
    Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
    Have a nice day,
    Mario

  • I enlarge text size and it goes back to small when I change page,how doI make it permanent?

    windows 7: when I enlarge text or font size to my preference it goes back to original when I change a page, I want to set it and forget it thanks.

    You can use one of these extensions to set a default font size and page zoom on web pages:
    *Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
    *http://kb.mozillazine.org/Zoom_text_of_web_pages

  • (early 2014) rMBP abruptly goes black (sleep mode) when computer is tilted at certain angles or lifted.

    My (early 2014) rMBP abruptly goes black (sleep mode) when computer is tilted at certain angles or lifted. Ive reset Energy saver mode to factory defaults and the problem still occurs.

    Please make a Genius Appointment and take it in for service.

  • Post an LIV invoice when it is out of tolerance

    I need to understand how to post an LIV invoice when it is out of tolerance e.g. BD Small difference or PP. Once the clark parks the invoice and passes the invoice to supervisor, how does the supervisor posts the document? Where does the additional (amount higher than tolerance) amount go?
    PO $100/ BD tolerance $10 but the invoice is for $115- where does the amount $5 get posted?
    Need help.
    Thanks in advance
    Raj

    Hello, Raj,
    ad BD "Form small differences automatically"
    -- if the the document ballance is within the limit, the difference is posted to transaction key DIF;
    -- if the the document ballance out of the limit, you cannot post the invoice;
    ad PP "Price variance"
    -- if is is for stock material, wit avr. price and quantity on stocks, it revaluates the actual stocks, i.e. transaction key BSX;
    -- if the material is with standard price, or there is no or not enough quantity on stocks, the difference is posted to transaction key PRD;
    Hope you'll find it helpfull.
    Kind Regards
    TomT

  • Why may mac starts all programmes (word, excel..etc), when I turn my mac on?

    why may mac starts all programmes (word, excel..etc), when I turn my mac on?

    Make sure that Open at Login is not selected?
    ... and that you have not checked the box "Reopen windows when logging back in"?
    ...  and Word, Excel etc are not included in the items listed in System Preferences > Users & Groups > Login Items?

  • HT1212 I need to unlock my iPod. I tried restoring it but a pop up box says that I need to turn off Find my iPod in my iCloud setting, but how am I going to do that when I don't know my password?

    I need to unlock my iPod. I tried restoring it but a pop up box says that I need to turn off Find my iPod in iCloud settings,  but how am i going to do that when I don't know my password?

    http://apple.stackexchange.com/questions/105166/find-my-ipad-setting-prevents-re store/105192#105192

  • My Photoshop CS3 goes very slow/choppy when I have a selection made.

    Hello,
    My Photoshop CS3 goes very slow/choppy when I have a selection made, with those little moving lines indicating the selection (the lines that look like walking ants). When I'm adding to the selection, it's fine again, because the "ants" aren't moving, same with when I hit Q to enter Quick Mask Mode--as long as the "ants" aren't moving, my Photoshop isn't slow. Is there any way to fix this? To either speed up Photoshop or to stop the "ants" from moving, and simply allow selections to be indicated by broken lines, but not moving broken lines?
    Thanks

    Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
               Language: English (Regional Setting: English)
    System Manufacturer: Tyan Computer Corporation
           System Model: S2668 Tiger i7505              
                   BIOS: PhoenixBIOS 4.0 Release 6.0    
              Processor: Intel(R) Xeon(TM) CPU 3.06GHz (4 CPUs), ~3.1GHz
                 Memory: 4096MB RAM
    Available OS Memory: 3072MB RAM
              Page File: 2548MB used, 3589MB available
    49.9 GB of 465 GB free.

  • TS4185 Just downloaded FACETIME on my 4yr. olf Imac running Snow Leopard. When making a call to my friend's Imac all works correctly going both ways. When my wife calls me via Facetime from her Ipad, I cannot click on "accept"- not there?

    Just downloaded FACETIME on my 4yr. olf Imac running Snow Leopard. When making a call to my friend's Imac all works correctly going both ways. When my wife calls me via Facetime from her Ipad, I cannot click on "accept"- not there? When called by the Imac (newest), the "accept" or "reject" radio button appears for me to click and connect. On my wife's Ipad the two radio buttons always appear when a call actiivates Facetime and comes on?
    There is nothing I can find in "Preferences" in Facetime to turn that on or off. I suspect it has to do with having a more current operating system; that the "controls" are in the operating system? [I'm guessing] It's frustrating getting Facebook calls from several friends on Ipads! Any ideas...VFP

    I suspect it has to do with not having a more current operating system
    Exactly, what Apple is doing is leveraging new features only on newer OS X versions to force you to upgrade OS X to 10.7 or later.
    What they don't tell you is 10.7 or later will NOT run your PowerPC based software, some of it you can't get Intel versions like for perfectly working printers, scanners and games etc. So it can be a very expensive OS X upgrade to 10.7 or later with third party software.
    http://roaringapps.com/apps:table
    Also they don't tell you is the risk in bricking your machine if the update goes badly, so you have to have AppleCare in case that occurs so it's on them to fix it. Else your paying money to replace the logicboard or buying a new machine prematurely.
    A four year old machine can't have AppleCare, it's only good for 3 years from date of purchase new.
    Your machine came with a boot hard drive, it's usually got about 4-5 years of life on it, then it needs to be replaced.
    Also they don't tell you the newer OS X version has more abilities and features that causes your machine to slow down in performance, especially on older machines.
    Also they implement new, idotic and extremely fustrating new user interface features in a arbitrary "you take it or leave it" manner with little or no fall back method.
    So upgrading OS X is a gamble on older machines that otherwise would likely work perfectly fine for the next 5 years if one didn't need to have to mess with it.
    Since Snow Leopard has slightly over 25% OS X version market share, your still good for security updates etc for the next few years if you just want to stay where your at and be happy.
    OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
    The Lions are, well, not so welcome due to Scott Forstall retard UI issues, OS X Mavericks 10.9 is likely going to fix things a bit better.
    But basically what is occuring is Apple is trying to force a faster hardware upgrade cycle with the more expensive products by leveraging features on the smaller devices that expire sooner.
    Apple is a hardware company that leverages whatever it can to get you to buy more hardware, it's why they are as rich as they are.

  • I have a new MacBook Pro Mid 2012 and it goes into deep sleep when I disconnect if from AC power.

    I have a new 13" MacBook Pro mid 2012 and it goes into deep sleep when it is disconnected from AC power.  I have to press the power button to wake it up.  Is this a known issue or is there something wrong with the MacBook Pro?

    There are a few threads about this around. Its a known issue for 2012 non retina users, not sure about Apple. It should not work this way and Apple has not put out an update to fix it yet. Check out these threads for some workarounds. I think I saw if you reinstall and don't update one of the updates you get normal functionality back. Otherwise there are some terminal changes you can make to make it operate mostly normally. I made some changes in terminal.
    https://discussions.apple.com/thread/4512384
    https://discussions.apple.com/message/20436126#20436126#20436126

Maybe you are looking for