Paused Slide continues when I click anywhere on the slide -- why? (CP5)

Hi -- at the end of the CBT I am creating I present some challenge questions. I am not using the Quiz feature as I do not need to capture the students answers.
I added a blank slide with an image with roll-over captions. I added a "Continue" button so they can go to the next page after they are done reviewing the image.
Everything works fine, the slide pauses so they have time to mouse-over the image, and the continue button takes them to the next page when clicked.
The weird thing is that it also goes to the next page when I click anywhere on the screen. This only happens on these three slides, the rest of my movie does not progress when you click on the background.
For the slide, I have it set to On Enter=Continue and On Exit=No Action, Display Time=3 seconds
For the Continue button, I have it set On Success=Go to the next slide, Attempts=1, Last Attempt=Go to the next slide, Pause After=1.1 sec
Does anyone know why when I click on the slide it goes to the next slide? I want the slide to pause until only the Button is clicked.
Thanks!

Your Continue button is currently set up so that if the learner does not click the button a Last Attempt action will be used. By default this will be Continue. So although you only wanted the user to go to the next slide if they clicked the button, by setting attempts to only 1, you've told Captivate that any click outside the button should invoke the failure action for that button, which will be to Continue to the next slide.
Try setting your button to infinite attempts. This disables the failure action.

Similar Messages

When I open a link in gmail the website opens as a completely black page and when I click anywhere in the page the whole thing turns white and there is nothing showing. This does not happen when I open the same link in IE

When I click on a link in gmail it will open the website as a black page. When I click anywhere on the page it turns completely white with nothing there. This does not happen when I open the same link in IE
== URL of affected sites ==
http://all

Do you have that problem when running in the Firefox SafeMode? ''A troubleshooting mode.'' 
1.You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. 
2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
If not, see this: 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Trying to edit photos, when I click anywhere on the lightroom display the screen surrounding the photo goes black

I've been using lightroom for a year or so now. Today I imported some photos and all of a sudden I can no longer to anything in the program. Whenever I click anywhere the screen goes black or white with whatever photo i'm looking at big in the center. I can't edit anything. Please help!!!!!!!!!

Hello Dave,
Congratulations on your new Apple TV. Also, thank you for the details about the issue you are experiencing when using AirPlay on your Apple TV.
I recommend reviewing the steps in the section titled "Troubleshooting performance issues with AirPlay or AirPlay Mirroring" in the following article (you can skip the steps that refer to a Mac since you are experiencing it on your iPad). I suggest reviewing the full section, but this step specifically stands out to me for the issue you described:
Use the Wi-Fi network troubleshooting guide to resolve interference and other issues.
Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Thank you for using Apple Support Communities.
Best,
Sheila M.

IDVD Crashes when I click anywhere in the App

I have iDVD 6. I have shared from iMovie to iDVD.
Using the Road Trip Theme. Inserted clips into the drop zones by dragging clips from the iMovie window and into the drop zones. This could be my problem. When I click on anything in iDVD it closes/crashes. What else could it be? I repaired permission, restarted.
Anyone have a resolution for this?
PowerMac G5 - Dual 1.8s Mac OS X (10.4.5) 1gb RAM, 106gb available on HD, second HD has 85gb available

This frequently helps solve some problems. Quit iDVD. Search for the file named com.apple.iDVD.plist and trash it. (A new one will be created next launch of iDVD.) Or look in: User/Library/Preferences. This may solve project loading errors too. Restart and use Disk Utility to Repair Permissions.

Typing cursor when I click anywhere on the page (this issue is not in the other, probably something I changed in about: config)

There is an screenshot: http://img35.imageshack.us/img35/73/problemfirefox1.png

hello, please press F7 in order to leave caret browsing mode - then the behaviour should be back to normal...

Firefox closes right after I click anywhere on the page.

I uninstalled and reinstalled firefox for couple of times to solve out my problem. Earlier it was saying that some .ddl is not a valid image. So, I changed the location of installation. Now its opening but when I click anywhere on the firefox window it closes without throwing any erro.
== Crash ID(s) ==
Its not giving any ID.
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

Maybe you have viruses or spyware on your computer. Scan it with antivirus program.

I inserted a HTML5 video in page, when I test it in a Browser, I see the poster image and controls, But when I click play button the video goes white, slider moves like its playing, but just white picture. There was no audio included in video. Please help

I inserted a HTML5 video in page, when I test it in a Browser, I see the poster image and controls, But when I click play button the video goes white, slider moves like its playing, but just white picture. There was no audio included in video. Please help

Without a link, it's anybody's guess.
It could be a problem the video rendering itself. Which software did you use?
Did you export to the 3 file types -- MP4, OGG and WEBM to support all browsers?
Does your web server support those 3 MIME file types?
Nancy O.

I click the "Tools" tab, then click the "Add-ons" tab. If I then click anywhere on the "Add-ons" dialog box, the dialog box immediately closes. I can't install plug-ins or add-ons. However, this happens only with my account. Other users have no such p

I click the "Tools" tab, then click the "Add-ons" tab. If I then click anywhere on the "Add-ons" dialog box, the dialog box immediately closes. I can't install plug-ins or add-ons. However, this happens only with my account. Other users have no such problem. I have also tried going to the "Add-ons" dialogue box through "Tools" then "Options." I still cannot get into the "Add-ons" tab; the dialog box closes. I have tried using the keyboard instead of the mouse; same problem.
== This happened ==
Every time Firefox opened
== I am unsure what caused it. I have tried re-installing firefox.

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Computer restarts when I click to play the slideshow

Hi, I compiled a powerpoint that is 4.9mb and 12 slides in length and sometimes when I click to play the slideshow the computer reboots. The other applications that are usually running are Safari and itunes. Does anyone know what's causing this?

I presume by powerpoint you mean this in the generic form as this is the keynote forum.
That's a pretty severe reaction- normally the worst thing that would happen on a fault is that the application would quit.
I would suspect that you have a hardware issue with your computer. You can test this by starting up from the original install ox disk (disk 1 if more than one came with it) and holding down d before the grey screen. Run the hardware test and see what it reports.

When I open iTunes, I receive an error that reads "iTunes has encountered a problem and needs to close. Sorry for the convenience." When I click to see the error, it reads "AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll" Why ?

When I open iTunes, I receive an error that reads "iTunes has encountered a problem and needs to close. Sorry for the convenience." When I click to see the error, it reads "AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll" Why ? I am overly frustrated. Please help. Not exactly sure which operating system I have. It is a dell laptop with xp.
AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll
ModVer: 8.0.50727.6195 Offset: 00026b72
AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll
ModVer: 8.0.50727.6195 Offset: 00026b72

Well I was able to successfully revert back to iTunes8. Here's my steps:
1. In Add/Remove Programs I deleted all Apple products (iTunes, QuickTime, Safari, Bonjour, etc.)
2. I then check C:\Program Files\ and made sure all folders were deleted (QuickTime, etc.)
3. I then ran a Registry Cleaner program to make sure all entries from Apple products were removed.
4. I then rebooted my PC
5. I then downloaded iTunes8.0.2 from here: http://www.apple.com/downloads/macosx/apple/ipod_itunes/itunes802forwindows.html
6. After it installed it said it could use my iTunes library file because it was created with a newer version. So I re-created my library by following these steps: http://support.apple.com/kb/HT1451
It took some time but iTunes is now back up and running. And I have all my playlists, etc. I haven't tried to sync anything yet. I'm just thrilled to have my iTunes back!

I bought songs on my laptop which synced to my iphone and iPad. But I can't find them on itunes library on my home computer. However, when I click download for the same song it says it has already been purchased. How do I find it on home computer?

I bought songs on my laptop which synced to my iphone and iPad. But I can't find them on itunes library on my home computer. However, when I click download for the same song it says it has already been purchased. How do I find it on home computer?

Is your "home computer" the same as your laptop or are these two different machines?

I can see my thumbnails for my events in iphoto, but when I click to open the folder, no photos show up. However, when I hover over the thumbnail, it shows the flicker of images that should be inside the folder, as well as

I can see my thumbnails for my events in iphoto, but when I click to open the folder, no photos show up. However, when I hover over the thumbnail, it shows the flicker of images
that should be inside the folder, as well as # of images in each folder. It also occasionally says the following when I try to even open iphoto: "Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete." So, I am scared to hit "upgrade" for fear I will never recover any of the images as the wording in this quote seems odd. The photos are not in the trash. Did I lose them all? Do you know if/how I can retrieve them?

iPhoto 08?
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

HT1351 I would like to sync ITUNES to my IPOD. When I click on devices the sync is greyed out. can anyone help

I would like to sync ITUNES to my IPOD. When I click on devices the sync is greyed out. can anyone help. I am running Windows 8

You need to select your iPod in iTunes. The command (from the menu bar?) is disabled because you have not selected a device for which the command is applicable.
The latest iTunes may hide the sidebar. To show the sidebar, from the menu bar, under View, select Show Sidebar. In the sidebar, find and select the iPod under DEVICES.
Once the iPod is selected, you can select the Sync command under File -> Devices in the menu bar. You can also just click the Sync button at the bottom left corner of the iTunes window (when the iPod is selected).

My ipod nano 5th gen wont play movies or videos on my ipod but plays them on itunes when i click on it the screen flashes black i have tried taking the movie off my ipod and putting it back on but it still won't work what should i do?

My ipod nano 5th gen. won't play movies or tv shows but it plays them on itunes. When I click on it the screen flashes black. I have tried taking the videos off my ipod and then putting them back on but it still won't work. what should i do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How is it I have 550 songs on my nano but only 269 show up in itunes...how do I get all 550songs and playlists back into itunes? Also when I click on 'computer' the nano iconn is up for about 5 secs then dissapears and I can't find it...what is going on?

How it it I have 550 songs on my nano but only 269 show up in itunes without playlists? How do I get all 550 songs and playlists back into itunes?
Also when i click on "computer" the nano icon is up for about 5s then goes away and I can't find it...what is going on?

spea105 wrote:
How it it I have 550 songs on my nano but only 269 show up in itunes without playlists? How do I get all 550 songs and playlists back into itunes?
How do you manage your iPod? Do you Sync your entire music library, or only selected playlists?

Paused Slide continues when I click anywhere on the slide -- why? (CP5)

Similar Messages

Maybe you are looking for