Pauses in video

When playing back video on imovie 9 (all of our videos are filmed on iphone 5), there are 1/2 second pauses about every 10 seconds during playback? Any suggestions or thoughts as to the cause of this?
Thanks!
Perry

To help troubleshoot we'll need the following system information:
Operating system
Browser
Flash Player version
When reporting issues with video or audio, it's also helpful to get your system hardware and driver details. Instructions for finding this information can be found here:
Windows
Mac
Finally, sometimes video and audio problems are caused at a lower level and not directly related to Flash Player. I recommend trying both of the links below to see how they perform. If the problem exists with both, then Flash Player is most likely not the culprit as the HTML5 video link does not use Flash Player when playing. You can verify the user of HTML5 by right clicking the HTML5 video and looking for the words "About HTML5" at the bottom of the context menu.
HTML5 video
Non-HTML5 video
Thanks,
Chris

Similar Messages

When I stream videos from my laptop onto my Apple TV via my iPad 2 using the Air Video app/server the video plays great however when I pause the video the Apple TV reverts back to the home screen within a few seconds and then when I want to restart watchi

When I stream videos from my laptop onto my Apple TV via my iPad 2 using the Air Video app/server the video plays great however when I pause the video the Apple TV reverts back to the home screen within a few seconds and then when I want to restart watching the video I have to re-buffer the video. Is there any way I can stop the Apple TV from reverting back to the home screen when I pause the video I’m watching?

Welcome to the Apple Community.
Contact the developer of the Air Video app.

E90 no pause on video capture

Why there isn't a pause for video capturing on E90? I would like to join several short scenes together, & is audio dubbing possible? What is a good software for editing video clips ?

I've got 'Pause' on mine.
Start recording and the option on the 'top/right' key is 'Pause'.

Is it possible to pause a video clip?

Hi,
Could anybody tell me if it possible to pause a video clip for a few frames and then resume playing later in the project?
I guess I could chop the video clip into several discrete shorter clips and create some static freezeframes, and then play them all one after the other to crate the same effect.
But that sounds clumsy so I wondered if there is a way to pause/resume a video clip within a project.
Thanks.
Meme.

Many thanks for the pointers. I excitedly booted-up Motion to explore further...
... but I couldn't find anything called Timing remap or re-timing etc. Then it dawned on me that I should have specified that I'm still using Motion 2, and I guess those features are only available in Motion 3?
However, armed with the new phrase 'Timing Remap', I dived back into Google and came up with this article:
http://www.kenstone.net/fcphomepage/speed_changesmotion.html
This explains how to use the Scrub filter (also available in Motion 2) to control the playback of video clips relative to the project.
Its a bit fiddly, but I'm comfortable with basic arithmetic, so I can certainly use it to achieve the effect I want (basicaly I need a video clip to pause and then resume a few times throughout a project).
So thanks again for the feedback. It really did help.

When i pause a video in FCPX the current frame becomes clear but when i press play they become blurry?

When i pause a video in FCPX the current frame becomes clear but when i press play they become blurry?

I had this SAME EXACT problem for WEEKS! >_<
It was so frustrating. I tried everything I could. I was even using uncompressed video files (+60GB in size!) to try to fix the problem, but nope. Nothing. Except this...
Go to:
Preferences -> Playback -> Playback Quality and select "High Quality"
By default, FCPX uses the lower quality setting to save resources.
"...Playback Quality pop-up menu to choose whether to always use the highest-quality video for playback or downsized video for better playback performance"
http://help.apple.com/finalcutpro/mac/10.0/#verb8e60ab7

Youtube plays dual audio in one tab and still plays one when i pause the video

Some Youtube videos I play plays the same audio twice with a little delay in between. If I pause the video one keeps playing. I don't know to fix this.

'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

How do I correct blurry pictures in iMovie? They are clear when I pause the video but blurry when playing the video.

How do I correct blurry pictures in iMovie? They are clear when I pause the video but blurry when playing the video.

Try sharing and see if the effect is still present when you play the shared movie. It can happen when playing within iMovie if there are insufficient resources to play a full resolution.
Geoff.

I pause my video and the audio continues...if I play again it causes a major headache. Help?

This might be an easy to answer question, but I am making my second video, so I'm not too knowledgeable. Anyway, I imported audio into my video and it plays back fine. So I play the video, and pause it to try and synchronize the audio. The video stops, but the audio keeps playing, and it will not stop until the whole thing has played. If I try to start from the beginning again and play the audio to sort of override it, it just overlaps with the original audio, and the resulting noise gives me a headache. I don't know if somehow I can stop the audio a portion of the way through, but if I can, that would be great. It would make syncing a whole lot easier. Thanks!

Ok, so I had a .m4a file on my computer, which I then turned into an mp3 using the adobe media encoder. I imported the mp3 using File-Import-Import to Library, and then I created a separate layer for the file and dragged the audio from the library onto the stage while I was on that layer. The layer now had a sound file on it, and I put a keyframe a ways ahead on the timeline so I could see the audio layer. I then played it back using the play button underneath the timeline to begin syncing my animation with the audio that I had imported. I stopped it, a little late as it turned out, but the music continued to play. It would not stop until it had gone through the whole song. While the song was playing I tried starting it from the beginning again, but the new sequence overlapped with the old one so they played together out of time, creating a very unpleasant noise. They both had to finish before I could play it back again to try and sync my animations more precisely. If I could pause the video (again, I'm using that little button at the bottom left of the timeline) and stop the audio, syncing would be so much easier, and I assumed there was a way to fix this. I am working with Flash Professional CS5.5. Thanks for your consideration!

Can Iphone 4 be hacked? Paused recorded video began to play another video after 30 minutes on pause

I recorded a video using my iphone camera today and had begun to replay it. I had paused the video to work on my computer and after about 30 minutes I noticed another picture I had taken today was now on the screen and a few minutes later, another video began to play that was recorded several months ago!? Can someone hack into my phone? WiFi was turned off.

I have the same EXACT problem. it won't play some of my videos, any youtube videos (says it cannot connect to server) and won't play a lot of other internet videos

How to pause while video recording on iphone6 ?

How to pause when video recording on iPhone 6?

Hello sbonasoro,
Welcome to the Apple Support Communities!
I understand that you would like to pause video while recording on your iPhone. You cannot pause a video recording and pick it back up where you left off, but you can stop the video and start a new one when you would like to continue filming. Please refer to the attached iPhone iOS 8 User Guide for further information (page 94).
Shoot some video. Choose Video, then tap the Record Video button or press either volume button to start and stop recording. Video records at 30 fps (frames per second). With iPhone 6 or iPhone 6 Plus, you can switch it to 60 fps in Settings > Photos & Camera.
Snap a still while recording: (iPhone 5 or later) Tap the white Take Picture button in the lower-left corner.
Have a great day,
Joe

My iPod automatically pauses the videos whenever I press play. How can I fix it?

My iPod automatically pauses the videos whenever I press play. How can I fix it?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all videos and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Regarding points see:
Apple Support Communities - Reputation, status levels and privileges

Please help me... music or play video, it pauses music/video for few seconds (2-7sec). kindly help what i need to do... will appreciate much...thank u my MBP specs: 13 inch early 2011 2.3 ghz intel

please help me... im having troubles using itunes, When i start listening music or play video, it pauses music/video for few seconds (2-7sec).
kindly help what i need to do... will appreciate much...thank u
my MBP specs:
13 inch early 2011
2.3 ghz intel core i5
4 gb 1333 mhz ddr3
mac os x lion 10.7.5 (11g63)
itunes 10.7 (21)

1. A 13" screen is awfully small to do any efficient editing. The 15" gives you significantly more on-screen real estate.
2. All of the MacBook Pros can run FCE. However the graphics processor in the 13" model will limit some functionality with effects. See Tom's earlier comment.
3. Not much difference. All these cpu's are fast. There will be more overall system performance gain from the quad core at the slower speed.
4. FCE cannot use more than 4GB RAM anyway, so the 4GB that comes with every MBP is more than adequate. If you expect to use Aperture or CS5 then go for more RAM, otherwise there's not much reason to add RAM. You will be better off spending your money upgrading to the 7200rpm hard drive.
5. Everything will be smaller on the high res screen; there are just more pixels (1680x1050) on the same 15.4" screen area. (I have a 15" MBP with the standard 1440x900 screen and it is beautiful.)

Pausing a video

I am totally lost and thought I would give the forums a shot.
But what I have set up is a picture with a link below it and when
you click the link the picture goes away and the flash player pops
up, connects then is ready for you to play. When I hit play, the
video starts no problem, but I have a link below the video that
says click here to close video, but i click it and the video still
can be heard, rightfully so. I want to be able to pause the video
when it is clicked on, is there someone out there who can help me
with this problem please. I am very new to flash and any expert
advice would be fantastic. Here is a link to a test page that show
what I am trying to do. Thanks very much in advance.
http://fbunet.com/testvideo.htm

No.

In vlc I hear sound ~500ms after I (pressed pause and video stopped)

Hi, In vlc sound plays ~500ms after I pressed pause and video stopped.
In mplayer it's the same. why can it be and how to fix it?
Thanks in advance.
Last edited by imm_yohan (2014-05-09 18:28:55)

clfarron4 wrote:I have this whilst playing videos with VLC, but only when I use VA API/VDPAU hardware acceleration. If I turn off all hardware acceleration in VLC, I get instant response.
It was disabled. I've tried to disable overlay as well, still the same.
It's laptop with Intel graphics 3000 as I can remember..
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
Last edited by imm_yohan (2014-05-09 19:00:06)

How Do I Pause A Video Recording?

How can I pause a video recording using the inbuilt camera on my iPod Touch 8GB? There don't seem to be a option to do this. Is there a way of combining videos to be as one instead?
Thanks

You can also check for problems caused by recent Flash updates and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in Flash 11.3 and later
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting
*http://helpx.adobe.com/flash-player/kb/flash-player-113-crash-mozilla.html

Unable to pause a video using Navigate and UpdateContext in Beta2

Hello,
In the Beta1, I had set the DefaultPause property of my VideoPlayer to "videoPause", and I set the OnSelect event of a navigation button to the following statement in order to navigate to the screen "scrHome".
UpdateContext({videoPause: true});Navigate(scrHome, ScreenTransition!Fade)
With Beta2, this is not working anymore: the video continues to play when I touch the navigation button.
I also tried with the following statement, but it does work either.
Navigate(scrDémos, ScreenTransition!Fade,{videoPause: true})
Thanks for your help !

Are you setting the videoPause property to true in the rule you're using to navigate to the video screen? For example, assume you're using a button to navigate to the VideoScreen, its OnSelect property should be: Navigate(VideoScreen, ScreenTransition!Fade,{videoPause:false}).
Basically, the value needs to change for the video to pause. If you don't have that set up, you could also do that within the rule you're using to navigate to scrHome as follows:
UpdateContext({videoPause: false});Navigate(scrHome, ScreenTransition!Fade,{videoPause: true})
Thanks
Robin

Pauses in video

Similar Messages

Maybe you are looking for