PAUSES

Out of nowhere, my computer seems to pause, wheel spins. For example, I am now using my safari and listening to itunes. No other programs running in the background. It pauses for a couple of seconds. This also happened a number of other times. Any suggestions.
Thx.

Another thing you could do would be to try running S.M.A.R.T. Utility to check out the health of your hard drive, as freezing can sometimes indicate a hard drive that is beginning to go south:
http://www.versiontracker.com/dyn/moreinfo/macosx/32454
You can download the demo and run it several times for free. It will give you a more comprehensive insight into the physical condition of your hard drive other than just S.M.A.R.T. status "verified" or "not verified".
It also wouldn't hurt to run the extended version of the Apple Hardware Test just to rule out any other possible hardware factors.
Good luck!

Similar Messages

  • My animated gif keeps pausing in captivate and flash

    Hi guys, thanks for your help.
    I made an animated gif in Photoshop CS4 and inserted it as an animation into captivate 6. The animation works (I played it several times by opening it with internet explorer and safari). But when I open it in Captivate the animation goes black for a split second-several times, before it reappears-several times. It gives it almost a "reloading" or pause look when I play it. The same in flash, but in Adobe Flash CS4 Professional the timeline shows black dots once in a while, as you can see in the screen shot below.
    See those black dots? I will insert a picture of what happens, when the player lands on one of those black dots:
    It's the same animation, but only shows a little. Like I said, it plays fine when I open it with an internet browser, it plays fine when I play it in photoshop, but it just won't work with flash or captivate.
    Any thoughts? Thanks so much!! I really appreciate your help guys!
    Nat

    No problem. Building a simple animation in Flash isn't that bad. You could save each "frame" as an image from PhotoShop and then import these into Flash and place one frame at the time on a keyframe in the flash timeline (press F6 to insert a keyframe).
    If you want your animation to loop then you don't have to do anything as this is the default behavior. If you want it to stop at the last frame you insert a command in ActionScript to stop it. Select the last keyframe and hit F9 and type stop() in the ActionScript window.
    Good luck!
    www.cpguru.com - Adobe Captivate Widgets, Tutorials, Tips and Tricks and much more..

  • At a Genius Bar appointment yesterday, we determined that I needed to go to Mountain Lion from Lion.  I purchased Mountain Lion at the Bar, and paused the install so that I could resume from home.  Now I can't find it to resume. Not in Downloads. ?????

    When I upgraded to Lion, my Parallels stopped working and I got a Bootcamp error message.  It had worked fine for the prior year.  I upgraded to Parallels 7.  No luck. At the Genius Bar, the Genius uninstalled Bootcamp.  No luck.  I still get "The Boot Camp partition /dev/diskOs4 used by Hard Drive 1 is missing."
    Another Genius suggested upgrading to Mountain Lion.  While at the Bar, I purchased Mountain Lion and then we paused the install so that I could resume it at home.  Once I got home, I can't find the Mountain Lion installer to resume.  It's not in the Downloads file.  Any clue?
    My business programs all run on Windows, so I have to get it operating.  The Genius Bar isn't much help.  Does anyone know how to get Mountain Lion installed?  How to get Parallels working?

    The "Geniuses" (and I use that word in sarcasm) at the Bar are lying to you. Upgrading from Lion to Mt Lion will not fix whatever problems you are having. In fact it will most likely make them worse.
    If you want to try installing Mt Lion to fix the problems you are having you will need to open the Mac App Store link in your Dock, Login to your Apple ID account for the MAS and go to your Purchases area. Mt Lion should be in there and you will be able to do a proper download. Once you either set your Mac into sleep or shut down and then left the internet connection at the Bar all record of that download was lost. So you will need to restart it again from the beginning, like described above.
    Good Luck

  • TS1362 Everything works except the **** thing won't play. I push the play arrow or instruct it to play and it stays eternally paused. No problem buying things from these dogs,just can't play the when everthing pops up on screen.Any ideas for a hopeless ol

    Everything works on ITunes except play function.I can select as song I want but cannot get it off "pause."I tried going to controls and instructing it to play(no go) and clicking again and again on play arrow(which flips it to pause...).Any ideas for a very old,very frustrated non-tech guy???
    Please!! Thnaks!!!

    Replying to myself. Kept trying different areas of the ipod this evening, clicking various buttons, including some I'd never used before. All of a sudden I could see my Nano in iTunes. I quickly clicked on Restore before iTunes changed its mind about recognizing the iPod. Moved some songs onto it and it appears to be back to normal.  Keeping my fingers crossed. 

  • Unable to print. HP printer keeps pausing!

    My printer suddenly refuses to print, job goes into queue, says it is printing, then printer pauses.
    I have powered down, deleted and re-added the printer.
    Printer is HP CM1312. Using OS X 10.6.8
    Any help aprreciated! thanks
    Steve
    Error log (gobbledygook to me) is:
    W [05/Feb/2015:18:26:09 -0500] No limit for Validate-Job defined in policy authenticated - using Print-Job's policy
    W [05/Feb/2015:18:26:09 -0500] No limit for Validate-Job defined in policy kerberos - using Print-Job's policy
    E [05/Feb/2015:18:27:05 -0500] [cups-deviced] Bad line from "HPLaserJetMFPFax": HPLaserJetMFPFax HPLaserJetMFPFax://usb://localhost?vendorId=0x03F0&productId=0x4F17&usbProduct= HP%20Color%20LaserJet%20CM1312nfi%20MFP&serial=00CNC891G5N0
    E [05/Feb/2015:18:28:39 -0500] [Job 2521] Unable to send print data
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] The following messages were recorded from 18:28:26 to 18:28:39
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Adding start banner page "none".
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Queued on "HP_Color_LaserJet_CM1312nfi_MFP" by "stevecohen".
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] File of type application/pdf queued by "stevecohen".
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Setting job-hold-until to no-hold
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Adding end banner page "none".
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Job released by user.
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] job-sheets=none,none
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] argv[0]="HP_Color_LaserJet_CM1312nfi_MFP"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] argv[1]="2521"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] argv[2]="stevecohen"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] argv[3]="Order "
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] argv[4]="1"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] argv[5]="AP_ColorMatchingMode=AP_ApplicationColorMatching AP_D_InputSlot= nocollate com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMApplicationName=Safari com.apple.print.JobInfo.PMJobName=Order\  com.apple.print.JobInfo.PMJobOwner=Steve\ Cohen com.apple.print.PageToPaperMappingMediaName=Letter com.apple.print.PageToPaperMappingType..n.=1 com.apple.print.PrinterInfo.PMColorDeviceID..n.=42057 com.apple.print.PrintSettings.PMColorMatchingMode..n.=0 com.apple.print.PrintSettings.PMColorSpaceModel..n.=3 com.apple.print.PrintSettings.PMColorSyncProfileID..n.=1294 com.apple.print.PrintSettings.PMCopies..n.=1 com.apple.print.PrintSettings.PMCopyCollate..b. com.apple.print.PrintSettings.PMDestinationType..n.=1 com.apple.print.PrintSettings.PMFirstPage..n.=1 com.apple.print.PrintSettings.PMLastPage..n.=2147483647 com.apple.print.PrintSettings.PMPageRange..a.0..n.=1 com.apple.print.PrintSettings.PMPageRange..a.1..n.=2147483647 DestinationPrinterID=HP_Color_LaserJet_CM1312nfi_MFP HPApplicationFilename=Safari.app HPApplicationFilename_Encoded=U2FmYXJpLmFwcA== HPApplicationName=Safari HPApplicationName_Encoded=U2FmYXJp HPComputerName=Steve\ Cohen’s\ iMac\ (10) HPComputerName_Encoded=U3RldmUgQ29oZW7igJlzIGlNYWMgKDEwKQ== HPDomainName=Steve-Cohens-iMac-10.local HPDomainName_Encoded=U3RldmUtQ29oZW5zLWlNYWMtMTAubG9jYWw= HPOriginalJobName=Order\  HPRealUserName=stevecohen HPRealUserName_Encoded=c3RldmVjb2hlbg== HPUUID=7279EB6B-B226-4B29-89C8-05D4F4340D07 HPwmCustomText= media=Letter PaperInfoIsSuggested..b. noPDFIsProtected..b. pserrorhandler-requested=standard job-uuid=urn:uuid:5e909959-1e13-3f8e-5c88-45390d1f72fe job-originating-host-name=localhost time-at-creation=1423178906 time-at-processing=1423178906 job-impressions=1 com.apple.print.PrintSettings.PMTotalSidesImaged..n.=1 com.apple.print.PrintSettings.PMTotalBeginPages..n.=1 PageSize=Letter"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] argv[6]="/private/var/spool/cups/d02521-001"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[0]="<CFProcessPath>"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[2]="CUPS_DATADIR=/usr/share/cups"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[8]="CUPS_STATEDIR=/private/etc/cups"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[9]="HOME=/private/var/spool/cups/tmp"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[11]="[email protected]"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[12]="SOFTWARE=CUPS/1.4.7"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[14]="USER=root"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[15]="CUPS_SERVER=/private/var/run/cupsd"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[16]="CUPS_ENCRYPTION=IfRequested"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[17]="IPP_PORT=631"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[18]="CHARSET=utf-8"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[19]="LANG=en_US.UTF-8"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[20]="APPLE_LANGUAGE=en-US"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[21]="PPD=/private/etc/cups/ppd/HP_Color_LaserJet_CM1312nfi_MFP.ppd"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[22]="RIP_MAX_CACHE=8m"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[23]="CONTENT_TYPE=application/pdf"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[24]="DEVICE_URI=usb://Hewlett-Packard/HP%20Color%20LaserJet%20CM1312nfi%20 MFP?serial=00CNC891G5N0"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[25]="PRINTER_INFO=HP Color LaserJet CM1312nfi MFP"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[26]="PRINTER_LOCATION=Steve Cohen’s iMac (10)"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[27]="PRINTER=HP_Color_LaserJet_CM1312nfi_MFP"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[28]="CUPS_FILETYPE=document"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] envp[29]="FINAL_CONTENT_TYPE=printer/HP_Color_LaserJet_CM1312nfi_MFP"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Started filter /usr/libexec/cups/filter/cgpdftops (PID 235)
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Started filter /usr/libexec/cups/filter/pstops (PID 236)
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Started filter /Library/Printers/hp/filter/hpPostProcessing.bundle/Contents/MacOS/hpPostProces sing (PID 237)
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Started backend /usr/libexec/cups/backend/usb (PID 238)
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] usb: AppleLanguages="en-US"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] STATE: +connecting-to-device
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Looking for 'Hewlett-Packard HP Color LaserJet CM1312nfi MFP'
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] load_classdriver(/System/Library/Printers/Libraries/USBGenericTOPrintingClass.p lugin) (kr:0x00000000)
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Opening connection
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] load_classdriver(/System/Library/Printers/Libraries/USBGenericTOPrintingClass.p lugin) (kr:0x00000000)
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] STATE: -connecting-to-device
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Sending print data...
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Set job-printer-state-message to "Sending print data...", current level=INFO
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] cgpdftops - using PPD file "/private/etc/cups/ppd/HP_Color_LaserJet_CM1312nfi_MFP.ppd"...
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] PS Matching Mode = AP_ApplicationColorMatching
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] cgpdftops - languageLevel = 3, mediaBox.size.width = 612, mediaBox.size.height = 792
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] cgpdftops - documentMediaBox.size.width = 612, documentMediaBox.size.height = 792
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] hpPostProcessing launched
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Final document orientation - 0
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] EWU support is absent for device.
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Pages per sheet - 1
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Orientation - portrait
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Allowing document iterator to handle job termination...
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] ------------------------------------------------------
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Pre-processing tasks:
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Line - %%EndComments Processor - DriverVersion "Insert driver info" (pre, , substr)
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Post-processing tasks:
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Page = 612x792; 12,12 to 600,780
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Line - %%BeginProlog Processor - Accounting "Insert LaserJet accounting information" (post, , substr)
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] slow_collate=0, slow_duplex=0, slow_order=0
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Line - %%Page: Processor - PageAccounting "Log page for accounting" (post, , substr)DEBUG: Before copy_comments - %!PS-Adobe-3.0
    D [05/Feb/2015:18:28:39 -0500] [Job 2521]
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] %!PS-Adobe-3.0
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] %APL_DSC_Encoding: UTF8
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] %APLProducer: (Version 10.6.8 (Build 10K549) Quartz PS Context)
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] %%Title: (Order )
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] %%Creator: (Safari: cgpdftops CUPS filter)
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] %%CreationDate: (Thursday, February 05 2015 18:28:26 EST)
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] %%For: (Steve Cohen)
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] %%DocumentData: Clean7Bit
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] %%LanguageLevel: 3
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] %%Pages: 1
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] %%BoundingBox: (atend)
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] %%PageOrder: Ascend
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] %%EndComments
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Before copy_prolog - userdict/dscInfo 5 dict dup begin
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Before copy_setup - %%BeginSetup
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] ------------------------------------------------------
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Calling processor DriverVersion before line %%EndComments
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Task "Insert driver info" complete. Processor - DriverVersion. Line - %%EndComments
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Calling processor Accounting after line %%BeginProlog
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Task "Insert LaserJet accounting information" complete. Processor - Accounting. Line - %%BeginProlog
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Before page loop - %%Page: 1 1
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Copying page 1...
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] pagew = 587.9, pagel = 767.8
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] bboxx = 0, bboxy = 0, bboxw = 612, bboxl = 792
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] PageLeft = 12.0, PageRight = 599.9
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] PageTop = 779.9, PageBottom = 12.1
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] PageWidth = 612.0, PageLength = 792.0
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Current page number is 0
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Calling processor PageAccounting after line %%Page: 1 1
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] PAGE: 1 1
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Wrote 1 pages...
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Read 8192 bytes of print data...
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Wrote 8192 bytes of print data...
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Read 8192 bytes of print data...
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Wrote 8192 bytes of print data...
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Read 8192 bytes of print data...
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Wrote 8192 bytes of print data...
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Read 8192 bytes of print data...
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Wrote 8192 bytes of print data...
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Read 8192 bytes of print data...
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Wrote 8192 bytes of print data...
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Read 8192 bytes of print data...
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Wrote 8192 bytes of print data...
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Read 8192 bytes of print data...
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Wrote 8192 bytes of print data...
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Read 8192 bytes of print data...
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Wrote 8192 bytes of print data...
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Read 8192 bytes of print data...
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Wrote 8192 bytes of print data...
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Read 8192 bytes of print data...
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Wrote 8192 bytes of print data...
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Read 8192 bytes of print data...
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Set job-printer-state-message to "Unable to send print data", current level=ERROR
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] USB class driver WritePipe returned e00002ed
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] USB class driver Abort returned e00002c0
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Sent 81920 bytes...
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Backend returned status 1 (failed)
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] Printer stopped due to backend errors; please consult the error_log file for details.
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] End of messages
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] printer-state=5(stopped)
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] printer-state-message="Unable to send print data"
    D [05/Feb/2015:18:28:39 -0500] [Job 2521] printer-state-reasons=offline-report,paused
    E [05/Feb/2015:18:29:31 -0500] [Job 2521] Unable to send print data
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] The following messages were recorded from 18:29:13 to 18:29:31
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] job-sheets=none,none
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] argv[0]="HP_Color_LaserJet_CM1312nfi_MFP"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] argv[1]="2521"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] argv[2]="stevecohen"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] argv[3]="Order "
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] argv[4]="1"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] argv[5]="AP_ColorMatchingMode=AP_ApplicationColorMatching AP_D_InputSlot= nocollate com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMApplicationName=Safari com.apple.print.JobInfo.PMJobName=Order\  com.apple.print.JobInfo.PMJobOwner=Steve\ Cohen com.apple.print.PageToPaperMappingMediaName=Letter com.apple.print.PageToPaperMappingType..n.=1 com.apple.print.PrinterInfo.PMColorDeviceID..n.=42057 com.apple.print.PrintSettings.PMColorMatchingMode..n.=0 com.apple.print.PrintSettings.PMColorSpaceModel..n.=3 com.apple.print.PrintSettings.PMColorSyncProfileID..n.=1294 com.apple.print.PrintSettings.PMCopies..n.=1 com.apple.print.PrintSettings.PMCopyCollate..b. com.apple.print.PrintSettings.PMDestinationType..n.=1 com.apple.print.PrintSettings.PMFirstPage..n.=1 com.apple.print.PrintSettings.PMLastPage..n.=2147483647 com.apple.print.PrintSettings.PMPageRange..a.0..n.=1 com.apple.print.PrintSettings.PMPageRange..a.1..n.=2147483647 DestinationPrinterID=HP_Color_LaserJet_CM1312nfi_MFP HPApplicationFilename=Safari.app HPApplicationFilename_Encoded=U2FmYXJpLmFwcA== HPApplicationName=Safari HPApplicationName_Encoded=U2FmYXJp HPComputerName=Steve\ Cohen’s\ iMac\ (10) HPComputerName_Encoded=U3RldmUgQ29oZW7igJlzIGlNYWMgKDEwKQ== HPDomainName=Steve-Cohens-iMac-10.local HPDomainName_Encoded=U3RldmUtQ29oZW5zLWlNYWMtMTAubG9jYWw= HPOriginalJobName=Order\  HPRealUserName=stevecohen HPRealUserName_Encoded=c3RldmVjb2hlbg== HPUUID=7279EB6B-B226-4B29-89C8-05D4F4340D07 HPwmCustomText= media=Letter PaperInfoIsSuggested..b. noPDFIsProtected..b. pserrorhandler-requested=standard job-uuid=urn:uuid:5e909959-1e13-3f8e-5c88-45390d1f72fe job-originating-host-name=localhost time-at-creation=1423178906 time-at-processing=1423178953 job-impressions=1 com.apple.print.PrintSettings.PMTotalSidesImaged..n.=1 com.apple.print.PrintSettings.PMTotalBeginPages..n.=1 PageSize=Letter"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] argv[6]="/private/var/spool/cups/d02521-001"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[0]="<CFProcessPath>"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[2]="CUPS_DATADIR=/usr/share/cups"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[8]="CUPS_STATEDIR=/private/etc/cups"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[9]="HOME=/private/var/spool/cups/tmp"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[11]="[email protected]"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[12]="SOFTWARE=CUPS/1.4.7"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[14]="USER=root"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[15]="CUPS_SERVER=/private/var/run/cupsd"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[16]="CUPS_ENCRYPTION=IfRequested"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[17]="IPP_PORT=631"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[18]="CHARSET=utf-8"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[19]="LANG=en_US.UTF-8"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[20]="APPLE_LANGUAGE=en-US"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[21]="PPD=/private/etc/cups/ppd/HP_Color_LaserJet_CM1312nfi_MFP.ppd"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[22]="RIP_MAX_CACHE=8m"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[23]="CONTENT_TYPE=application/pdf"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[24]="DEVICE_URI=usb://Hewlett-Packard/HP%20Color%20LaserJet%20CM1312nfi%20 MFP?serial=00CNC891G5N0"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[25]="PRINTER_INFO=HP Color LaserJet CM1312nfi MFP"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[26]="PRINTER_LOCATION=Steve Cohen’s iMac (10)"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[27]="PRINTER=HP_Color_LaserJet_CM1312nfi_MFP"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[28]="CUPS_FILETYPE=document"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] envp[29]="FINAL_CONTENT_TYPE=printer/HP_Color_LaserJet_CM1312nfi_MFP"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Started filter /usr/libexec/cups/filter/cgpdftops (PID 247)
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Started filter /usr/libexec/cups/filter/pstops (PID 248)
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Started filter /Library/Printers/hp/filter/hpPostProcessing.bundle/Contents/MacOS/hpPostProces sing (PID 249)
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Started backend /usr/libexec/cups/backend/usb (PID 250)
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] usb: AppleLanguages="en-US"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] STATE: +connecting-to-device
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Looking for 'Hewlett-Packard HP Color LaserJet CM1312nfi MFP'
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] cgpdftops - using PPD file "/private/etc/cups/ppd/HP_Color_LaserJet_CM1312nfi_MFP.ppd"...
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] PS Matching Mode = AP_ApplicationColorMatching
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] cgpdftops - languageLevel = 3, mediaBox.size.width = 612, mediaBox.size.height = 792
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] cgpdftops - documentMediaBox.size.width = 612, documentMediaBox.size.height = 792
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] hpPostProcessing launched
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Page = 612x792; 12,12 to 600,780
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] slow_collate=0, slow_duplex=0, slow_order=0
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Before copy_comments - %!PS-Adobe-3.0
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] %!PS-Adobe-3.0
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] %APL_DSC_Encoding: UTF8
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] %APLProducer: (Version 10.6.8 (Build 10K549) Quartz PS Context)
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] %%Title: (Order )
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] %%Creator: (Safari: cgpdftops CUPS filter)
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] %%CreationDate: (Thursday, February 05 2015 18:29:14 EST)
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] %%For: (Steve Cohen)
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] %%DocumentData: Clean7Bit
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] %%LanguageLevel: 3
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] %%Pages: 1
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] %%BoundingBox: (atend)
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] %%PageOrder: Ascend
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] %%EndComments
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Before copy_prolog - userdict/dscInfo 5 dict dup begin
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Before copy_setup - %%BeginSetup
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Before page loop - %%Page: 1 1
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Copying page 1...
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] pagew = 587.9, pagel = 767.8
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] bboxx = 0, bboxy = 0, bboxw = 612, bboxl = 792
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] PageLeft = 12.0, PageRight = 599.9
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] PageTop = 779.9, PageBottom = 12.1
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] PageWidth = 612.0, PageLength = 792.0
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Final document orientation - 0
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] EWU support is absent for device.
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Pages per sheet - 1
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Orientation - portrait
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Allowing document iterator to handle job termination...
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] ------------------------------------------------------
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Pre-processing tasks:
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Line - %%EndComments Processor - DriverVersion "Insert driver info" (pre, , substr)
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Post-processing tasks:
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Line - %%BeginProlog Processor - Accounting "Insert LaserJet accounting information" (post, , substr)
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Line - %%Page: Processor - PageAccounting "Log page for accounting" (post, , substr)
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] ------------------------------------------------------
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Calling processor DriverVersion before line %%EndComments
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Task "Insert driver info" complete. Processor - DriverVersion. Line - %%EndComments
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Calling processor Accounting after line %%BeginProlog
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Task "Insert LaserJet accounting information" complete. Processor - Accounting. Line - %%BeginProlog
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Current page number is 0
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Calling processor PageAccounting after line %%Page: 1 1
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] PAGE: 1 1
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Wrote 1 pages...
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] STATE: +offline-report
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Printer is offline.
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Set job-printer-state-message to "Printer is offline.", current level=INFO
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] load_classdriver(/System/Library/Printers/Libraries/USBGenericTOPrintingClass.p lugin) (kr:0x00000000)
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] STATE: -offline-report
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Printer is now online.
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Set job-printer-state-message to "Printer is now online.", current level=INFO
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Opening connection
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] load_classdriver(/System/Library/Printers/Libraries/USBGenericTOPrintingClass.p lugin) (kr:0x00000000)
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] STATE: -connecting-to-device
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Sending print data...
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Set job-printer-state-message to "Sending print data...", current level=INFO
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Read 8192 bytes of print data...
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Wrote 8192 bytes of print data...
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Read 8192 bytes of print data...
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Wrote 8192 bytes of print data...
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Read 8192 bytes of print data...
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Wrote 8192 bytes of print data...
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Read 8192 bytes of print data...
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Wrote 8192 bytes of print data...
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Read 8192 bytes of print data...
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Wrote 8192 bytes of print data...
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Read 8192 bytes of print data...
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Wrote 8192 bytes of print data...
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Read 8192 bytes of print data...
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Wrote 8192 bytes of print data...
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Read 8192 bytes of print data...
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Wrote 8192 bytes of print data...
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Read 8192 bytes of print data...
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Wrote 8192 bytes of print data...
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Read 8192 bytes of print data...
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Wrote 8192 bytes of print data...
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Read 8192 bytes of print data...
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Set job-printer-state-message to "Unable to send print data", current level=ERROR
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] USB class driver WritePipe returned e00002ed
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] USB class driver Abort returned e00002ed
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Sent 81920 bytes...
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Backend returned status 1 (failed)
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] Printer stopped due to backend errors; please consult the error_log file for details.
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] End of messages
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] printer-state=5(stopped)
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] printer-state-message="Unable to send print data"
    D [05/Feb/2015:18:29:31 -0500] [Job 2521] printer-state-reasons=paused
    E [05/Feb/2015:18:34:32 -0500] [Job 2521] Stopping unresponsive job!

    If you haven't done so already, try resetting the printing system.
    Reset Printing System

  • When I listen to music on my iPhone and pause it, if I come back to it later, the playlist has started over. I have a 4S running on iOS 7.0.4. Is there any way to keep this from happening so that my playlist will start off where I last was?

    When I listen to music on my iPhone and pause it, if I come back to it later, the playlist has started over. I have a 4S running on iOS 7.0.4. Is there any way to keep this from happening so that my playlist will start off where I last was?

    Dear Jody..jone5
    Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
    Goodluck
    Atousa

  • Media encoder cc pauses  while I edit in premiere cc!

    If I try editing in premiere cc while encoding in media encoder cc, the encode pauses. what gives?

    If you'll notice your encoding in AME, it normally maxes out all your CPU cores.  It does mine.  This is awesome!
    But, if you want to edit, you need those cores, especially with Long-GOP footage that relies on CPU for real-time decompression.  So, in effect, you're telling your computer to let Pr take over the CPU when you start editing in Pr.
    It's a pretty smart way that Adobe enabled this behavior, if you ask me.

  • Adobe Media Encoder pausing rendering while working in Premiere Pro

    Hello everyone,
    So I am redering a video in Adobe Media Encoder and at the same time I am editing a new one in Premiere Pro.
    I noticed that AME is constantly pausing the rendering and did not know why. It turns out that while I'm editing a video in Premiere Pro, I am constantly pressing the space bar to start/pause the video I'm editing. While I do that, AME keeps pausing/unpausing the rendering. Somehow, pressing the space bar in PP has an effect in AME.
    I have no clue why it does that because the Premiere Pro window has the focus, not the AME one.
    Has anyone ever seen that?
    I use Windows 8 and Adobe CC.

    Hi Rallymax,
    Yes I do queue footage by having an Autowatch set up on the directories where the video is written to.  I rarely do a direct export unless testing new settings.
    Don't take this as gospel but I too had a feeling that GPU acceleration didn't happen with AME, only direct export.  Not sure where that came from, I did watch some of the recent Adobe TV Web Seminar's about new features of CC products etc, so maybe on one of those?
    I found this while trying to find out where I had seen it but it is from AMD site not Adobe so whether it's fully 100% correct I dunno:
    Adobe Media Encoder
    The Adobe Media Encoder (AME), with support for OpenCL™ and GPU acceleration, automates the production of multiple encoded versions of source files, sequences, and compositions in Premiere Pro CC. With the GPU-accelerated AME and AMD graphics technology, editors can quickly encode projects and output files for virtually any destination. AMD GPUs handle the heavy lifting, freeing the system’s CPU to perform other functions.
    I will try the same test as Jason, if I can find any AVHCD video and see what the results are.  Will be interesting.

  • Can't pause iTunes in Mini Mode

    Upgraded to the latest OS and noticed that I can't pause a song playing in iTunes till I fully expand the window and hit the pause button. This happens each time I start iTunes and reduce the window size. Has anyone encountered this issue?
    Also noticed that when iTunes is in shuffle mode and I manually fast forward to the next song the GUI gives the appearance of skipping severals songs before the next one begins playing - not a problem - merely an observation.
    peace

    It appears after an error in downloading a video that I purchased last night, and getting the dreaded 42031 error, http://discussions.apple.com/message.jspa?messageID=7448373#7448373 *My problem with pausing the mini player has returned.* Restarting iTunes doesn't help, and now I'm out a video that was "album only"... Still waiting on an email response from a human.

  • IDE1 Pausing

    Ok, I have a k7t turbo limited edition board, with 256 mb ram and an Athlon 1600.
    I have my HD plugged up to IDE1 and whenever I do something large (like copy a big file) or do anything that uses the hard drive a lot, my hard drive either runs really slow, or pauses for a few seconds.
    I dont know wether this is because of the way my cables are set up on the board, or a board fault.
    I have a Maxtor 7200 40 gig HD and if I plug my CD roms drives up to IDE1, it does the same thing when doing things with them.... What can I do?
    I am using an 80 conductor cable with the HD and a burner on IDE1 and a 40 conductor cable with a DVD drive on IDE2.
    Does it matter if I use an 80 CC on IDE2 or is it only limited to the blue slots
    Thank you.

    I have the same problem..
    When I try and copy large files the machine either goes slow (and I mean slow... I could probably copy the files faster) or hangs..
    I've tried the dma settings.. different cables.. nothing seems to work so if anyone can help that would be great.
    My specs are..
    KT3 Ultra
    Amd XP2000
    Ibm 80gb 7200 hd
    512mb pc2700 ram
    Help please !

  • How to pause stage/swf with audio when a new tab is opened/ out of focus in browser

    I have created a container in Flash Professional CS5 for my project’s CBT.  I’ve been able to script many of the features we require using AS3, but there are a couple of things I’m still trying to work out.
    I would like the swf presently playing in one tab to pause and go silent when another swf is opened in a new tab (the sound is inside this externally loaded swf which is loaded inside a movie clip from buttons nested a movie clip down).  I’ve tried :
    var originalFrameRate:uint = stage.frameRate;
    var standbyFrameRate:uint = 0;
    addEventListener(Event.ACTIVATE, onActivate);
    addEventListener(Event.DEACTIVATE, onDeactivate);
    function onActivate(e:Event):void
           stage.frameRate = originalFrameRate;
           trace("in focus");
    function onDeactivate(e:Event):void
           stage.frameRate = standbyFrameRate;
           SoundMixer.stopAll();
           trace("out of focus");
    And
          I’ve looked into the HTML tag “has Priority”
    and coded buttons to:
    function fl_ClickToGoToWebPage(event:MouseEvent):void
           navigateToURL(new URLRequest("http://www.ansaldo-sts.com/AnsaldoSTS/EN/index.sdo"), "_blank");
           MovieClip(this.stage).stop();
    With variations of:
    MovieClip(this.parent.parent)stop();
    MovieClip(this.parent.parent.parent.parent)stop(); because the button is 3 movie clips deep.
    MovieClip(this.root)stop();      MovieClip(root)stop();MovieClip(this.currentTarget.root)stop();
    Could someone please provide me with the code?
    This function is present when I publish the CBT with Captivate, so obviously there must be code available. You can set the Captivate button to open url in new window and pause movie.
    Is there something I can add to the html file that is similar to the “has Priority” for mobile devices or is there javascript that can be added to the flash itself?

    You would send a command to Flash from JavaScript when window.onblur event occurs.

  • Pause statement in java?

    I was wondering if there is code in java to "pause" a program, just like C has getch() or system(pause) etc. ?
    Because in my program I need to prompt user if he/she wants to continue.
    -thanks

    System.out.print("Do you wish to continue (y/n)?");
    char c = (char) System.in.read();
    System.out.println("\nContinuing on...");

  • Need help in controlling a video (play/pause) with the main play bar in Cp7.

    In a presentation, I'm doing an online ordering demo - my slide(s) have a video object, audio clip and may have various text and/or shapes that will transition from time to time. The problem being, if Pause is clicked in the main/TOC play bar, the presentation pauses but the video continues to play, until the end of that video. My video is an .f4v (I've also tried it as an .flv).
    What can i do to allow the main play bar to control the video?

    Insert as Slide video, not as Event video.  Then the playbar will also control the video.

  • How do i make an image pause in a flash movie clip

    Please can someone help me. I am trying to find out how to pause or stop an image in a basic flash movie clip,  after it has entered from one side and before it exits the other side.
    I have been trying to work it out myself for three days but no joy. I am practicing  for a test with a training agency which gave me a disk to use but nowhere in it does it say how this is done. I am also having a lot of difficulty making stop start buttons work with this movie clip. I am using a trial cs5.5 version of Flash which expires in 7 days so i need to know this soon. I am up to speed on most of the features, its just this one thing that has me stumped. A lot of the tutorials or examples  i have found on the net are very long winded and hard to follow exactly. Could someone let me know, step by step the sequence i should follow after i have created an object  and made it go from one side of the stage to the other.

    Hi
    Thank you for getting back to me. Yes i am using a timeline tween. I have an image on my stage which moves in from one side and out the other side. I am trying to stop or pause the image. The effect i will be asked to reproduce in my exam will be something very much like the banner on the website http://www,iactweb.com. If you go to this website you will see images arrive on the banner and pause before exiting the other side. I am fairly up to speed on all the aspects of getting this effect but i have forgotten what i learned during the course on how stop or pause the images. I am using the trial cs5.5 version of flash . Thanks again for getting back to me.

  • How can I grant users the ability to pause/resume printing without a "print operators group" password.

    Greetings,
    We are running 10.8.5 on 30 machines in an active directory environment (graphics lab). The clients are experiencing a persistant error when pausing or resuming print jobs. Each time something is paused, it requires an administrator password to resume the job. Administrators are not always present so designers are locked out of all of the printers until we come in (or remote in) to authenticate.
    I spoke with Apple today and they said they would not support active directory accounts and that the account must be edited by the department that created the account because the restrictions come from the Active Directory account preferences.
    On the other hand, I ALSO read that I can edit this in the CUPS interface or modify it with the terminal command below, locally.
    dseditgroup -o edit -u admin_name -p -a user_name -t user _lpadmin
    "dseditgroup" adds the user_name to a group (in this case, _lpadmin).
    And admin_name is the name of your administrator's account.
    a) Must this be modified on the Active directory account or CAN I modify this on the local machine via CUPS or terminal?
    b) If so, how would I grant users the ability to resume printing without an admin password?
    c) If not, exactly what must be modified in the active Directory account to allow pause/resume without an admin password.
    I have seen a terminal command that adds users to the print operatiors group (Ipadmin) and I have seen some info on editing the CUPS interface, If i must edit the CUPS interface to allow this, can anyone point to detailed instructions on how to make this change.
    I also saw info on editing the CUPS interface but the suggestion lacked details as to how and how to return to default if it does not work.
    I also saw a post with these suggestions below but without detail as to how one would carry this out.
    /etc/cups/cupsd.conf
    # All administration operations require an administrator to authenticate...
    <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
    AuthType Default
    *#Require user @SYSTEM*
    *Require valid-user*
    Order deny,allow
    </Limit>
    # All printer operations require a printer operator to authenticate...
    <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
    AuthType Default
    *#Require user @AUTHKEY(system.print.operator) @admin @lpadmin*
    *Require valid-user*
    Order deny,allow
    </Limit>
    /etc/authorization
    +The system.print.operator key is new to Snow Leopard and seems to control resuming and pausing a printer queue among other things.+
    <key>system.print.admin</key>
    <dict>
    <key>allow-root</key>
    <true/>
    <key>class</key>
    <string>user</string>
    <key>group</key>
    <string>staff</string>
    <key>shared</key>
    <true/>
    </dict>
    <key>system.print.operator</key>
    <dict>
    <key>allow-root</key>
    <true/>
    <key>class</key>
    <string>user</string>
    <key>group</key>
    <string>staff</string>
    <key>shared</key>
    <true/>
    </dict>
    I have read all posts on this subject and I still am not clear on how to proceed, please assist.
    Thanks in advance,
    V

    Hello again.  For AD environments you can run the following command on each workstation:
    sudo dseditgroup -o edit -n /Local/Default -u localadmin -p -a "Domain Users" -t group _lpadmin
    This command assumes you are typing this interactively on the machine.  Obviously change localadmin to the Mac's local admin's name.  When running you will be prompted for password twice.  Once to elevate permissions (sudo) and once to validate you are localadmin.
    If you are using Apple Remote Desktop (or JAMF or other management suite), you can push this command out while embedding the localadmin's password. 
    sudo dseditgroup -o edit -n /Local/Default -u localadmin -P yourpass -a "Domain Users" -t group _lpadmin
    Please note, if your password uses special characters (/-\) this may fail over ARD.
    In Mavericks, AD groups are cached once they are referenced.  If you are dealing with a lot mobile users (laptops) you might want to replace Domain Users with everyone
    R-
    Apple Consultants Network
    Apple Professional Services
    Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store

  • Pause for user click missing after Seamless Tabbing fix.

    I am upgrading a project from Captivate 5.0 to 5.5. Two of the lessons that worked fine in 5.0 have problems in 5.5. Both lessons use the Tab key to move from field to field in a data row and then the Enter key to calculate at the end of the row. This worked fine in 5.0. In 5.5, pressing Tab caused jump to browser address window. I searched blog and found following solution to add:    so.addParam(seamlessTabbing:, :false:);        to the htm file generated when publishing the file. This is not a desirable solution for long term course maintenance, but it did work. Unfortunately a new problem then appeared. The project moved ahead without waiting for user input in the simulation exercises.
    For slides with click boxes using Tab shortcut key and no other interactive objects, the movie just skipped ahead without waiting for user click. I would like the project to pause until the user presses the Tab key and then move to the next slide.  The properties for the click boxes are:
    Action:
    On success: Go to the next slide
    Attempts: Infinite
    Allow mouse click - yes
    Shortcut: Tab
    Options:
    Captions: Failure only
    Others: Pause for Success/Failure Captions and Pause project until user clicks
    Timing:
    Display for: Rest of slide
    Appear after 0 seconds   (I have played around with this setting, but it does not seem to make a difference.)
    For slides with Text Entry, the failure captions display before the user has a chance to input anything. Sometimes the captions flash several times at random. I would like the failure captions to only display when the user  enters an answer that does not match the stored answers.  The properties for the text entry boxes are:
    General:
    Default text: blank
    Retain Text - checked
    Validate User Input - checked
    Var Associated: Text Entry Box ## (## changes from slide to slide)
    On Focus Lost: No action
    Action:
    On Success: Go to the next slide
    Attempts: Infinite
    Shortcut: Tab
    Options:
    Captions: Failure only
    Others: Pause for Success/Failure Captions
    Timing:
    Display For: Rest of slide
    Appear after: 0.5 sec.
    Pause After: 1 sec
    Transition: No Transition
    To test whether it was something I was doing in the editing, I went back to the original 5.0 version of the lesson and imported into 5.5 again and published without doing any editing. The lessons that worked fine in 5.0 did not work in 5.5. Then I tried replacing all the click boxes with new ones created in 5.5. That did not work. I tried adjusting the timing. That did not work. For the text entry boxes, I tried using Show Button, creating transparent button with Tab shortcut. That did not work. Several of these suggestions were ones that I found elsewhere in the Blog with similar but not identical problems. I never found a problem that combined the seamlessTabbing with the missed pauses.
    I am puzzled and frustrated that these lessons that worked fine in 5.0 don't work in 5.5. Our primary edit is only to update the screen images and add a few new fields. I would often reposition an object on the slide, but not change its properties. Since most of the lessons are working fine in 5.5 and only these two that heavily use the Tab key are not working in 5.5. I don't really have the option of going back to 5.0. I need to put them in an aggregator and they all need to be the same version.
    Is there a patch or a quick fix? Also, can the patch to the htm file be built in or is that what is causing the problem? For future course maintenance, it will be complicated to have to treat these two lessons specially. Also, we usually link to the swf file and not the htm file. Our users often use browsers other than Internet Explorer.
    Any suggestions?   Thanks in advance.

    It would seem Intego Virus Barrier X6 has an intermittent habit of putting the IP address of Apple TV into the Blocked Addresses list despite having checked the 'Trust Apple TV' box and inputting the address into the Trusted Addresses list. Over the course of less than a year this has occurred approximately 4 times to me. My last variation on getting to the root of the problem was to lock the settings with the padlock. I will monitor the situation and should it happen one more time will notify Intego of this 'bug'.

Maybe you are looking for