Pausing play head for a while on a frame

Hello All:
I want to insert an action on a frame that stop the play head
about 20 second on that frame ,I appreciate you .
Mohsena

use:
stop();
setTimeout(playF,20000);
function playF(){
play();
}

Similar Messages

  • My iPod Video Plays video for a while the freezes

    Just got a question. I just bought an iPod 60gb 5th Gen. a week ago and I loaded up some videos in it. It seems that when I play the videos for about 5 mins it just goes to pause or freezes a while then when it starts playing again the sound does not come out, video still runs fine but no sound at all. Anyone has an idea of what is going on?

    I'm having the same problem and I use QuickTime setting that they provide specifically for converting movies to .m4v format for the iPod. I think we should all return them to the nearest Apple store for a new replacement.
    Papi625
    Hello everyone. I'm having the same problem. I
    called tech support and they told me that I'm
    probably not downloading the videos correctly. I
    told her that I didn't know there was a specific
    format for videos on iTunes. She said they are
    supposed to be in AAC. Is this true? I checked the
    properties of the video and they are in MPEG-4
    format. Any advice or should I just forget tech
    support and go to the Apple store and tell them that
    it's freezing?

  • Help! PC somehow shut down itself everytime i play game for a while.

    I just upgraded my pc yerterday and i've got this super annoying problem. I just upgraded to MSI P67A-GD65 + MSI N560 gtx TI Twin Frozr2 OC, intel I7 2600k, 16 gig of ram and 3 hd with total of 2.5 TB storage. I have this psu called AmacRoX SPEED POWER AX650-S it serves me well for more than a year before i upgraded my pc yesterday.
    So i have this problem, whenever i play a game in full screen, somehow a minute or two later my pc just died for no reason, and it start itself a couple seconds later. I've tried finding a solution on the net for a day and nothing works. I've tried not using newest driver, I've tried turning off that auto restart feature on the start up & recovery option thing but it still won't give me a blue screen. I don't know what else to do.
    Btw here's what it said on the sides of my psu :
    AC Input : 100-240Vac - 10-5A 50-60hz
    DC Output :               +3.3V +5V +12V1 +12V2 +12V3 +12V4 -12V +5Vsb
    Max Output Current :   35A    30A   18A     18A     18A      18A   0.5A    3.0A
    Max Combined Pwr  :        180W                           624W
    Total Power             :                        650W
    Is my psu really the problem? Cause as of now i don't have any more spare budget and just hoping that theres a button that i just have to push to fix this problem. I'm really desperate right now, Any help is appreciated! THANKS!!!

    To check your PSU look at the labeling/sticker on it. It will have the complete set of stats there and there should be a line that says 12v check those to make sure that it gets at least 30amps on the 12v rail.
    If it doesn't say 30a or more under the 12v then the PSU has been your issue the whole time. Also, don't simply buy a "more powerful" one. Get a more reliable, a tested, a known brand. One that is known to be decent. I Suggest a Corsair TX650v2 or higher.
    Moving from 450w to 1000w won't cure your problem, it needs to have the amount of amps on the 12v rail which is requested by all the components of your system. If it doesn't have enough power to support your rig under strain, it will shut off to protect your investment. You're lucky you didn't buy too cheaply and make a bomb out of your PC instead.
    I don't understand why people skimp out on the Heart of their rigs. The Power Supply is what pumps the much needed blood (electricity) to your organs (PC components). Without the proper amount, it doesn't work.
    Use this link to figure out what kind of PSU you need:
    http://c1.neweggimages.com/BizIntell/tool/psucalc/index.html?cm_sp=Cat32_PowerSupply_left-_-PowerSupplyFinder030510-_-http%3a%2f%2fpromotions.newegg.com%2fproductfinders%2fpowersupply.jpg

  • Global HotKey for Pause/Play,Next Song, etc.

    It would be nice to have an Global Hotkey so you can pause/play your music while browsing and not switching between screens. Or when you are gaming and you want another song but you don't want to alt tab and stay idle, a (customizable?)  Global Hotkey(i.g. ctrl+shift+right) would be such an great improvement in the usefulness of Spotify.

    Well, there is a simple solution to your inquiry if you use Mac OSX Lion. I suppose that you, just like me, don't want to cram your toolbar with extra icons and I also suppose that you use an external keyboard that lacks the playpause/next/previous buttons.
    Here's your 5-min solution :)
    Open up the Automator Application (Applications/Automator.app) 
    Create a new document (⌘N) and choose the "Service" type for your document.
    On the "Service receives selected" item in the top side of the window select "no input" from the dropdown.
    Search for "Run Applescript" from the searchbar on the left side of the window.
    Drag the "Run Applescript" item in the main window area.
    Delete the (* Your script goes here *) line and paste this instead:
    tell application "Spotify" to playpause
    Save your script (File > Save or ⌘S) and give it a meaningful name like Spotify PlayPause :D
    Go to System Preferences > Keyboard > Shortcuts and select Services from the left column.
    Scroll down to the General Section and find your Spotify PlayPause item.
    Click the add shortcut button and press the combination of keys that will be your shortcut. (eg. I gave it the ⌃⌘P shortcut).
    Test that it's working by clicking on System Preferences (next to the Apple Logo on top of your screen) > Services > Spotify Play Pause. (Actually this step is necessary for the shortcut to be registered to your system).
    You're done! Your shortcut is now available to you, in whichever program you have open.
    PS. In order to create a next or previous track shortcut, you should follow the above procedure, but on step 6 you input
    tell application "Spotify" to next track
    tell application "Spotify" to previous track
    respectively.
    If you have any questions feel free to ask :)

  • 'Music' displays but won't play. Settings appear correct and iPhone is selected for output.  Startup screen intermittently displays with the lower pause/play volume bar for no clear reason..... developed at the same time as play failure.  Ideas????

    'Music' displays but won't play. Settings appear correct and iPhone (3G)  is selected for output.  Startup screen intermittently displays with the lower pause/play volume bar for no clear reason..... developed at the same time as play failure.  Ideas????

    Thank you for the replies.
    Appearane of 'Music' functions (I>>   > II   <<I,   plus volume slider)  on the lock/log in screen (when first turning on the iPhone) thus far seems without pattern, i.e. regardless of which if any applications are up in the background, and indeed even when all have been quit.
    All visual aspects of 'Music' appear normal after launch including the title scroll across the top in vertical mode. However, while pressing play (>) converts the play (>) icon to pause (II), selected song does not play and the elapsed time bar (upper end between the track count and the repeat/shuffle icons) remains stationary at 0:00 or at any point to which it is dragged.  When using home sharing this same problem persists regardless of what output is selected.
    Hope that may prompt a thought somewhere.

  • HT204406 Hi, Although I had iunes downloaded on my pc & been using for a while now, today I've been prompted to download itunes again. This has been successfull except that 65 songs that I had previously in my library are now no longer able to play, the m

    Hi, Although I had itunes downloaded on my pc & been using for a while now, today I've been prompted to download itunes again. This has been successfull except that 65 songs that I had previously in my library are now no longer able to play, the message informes me that the original files could not be found. Yet these songs are still on my ipod after being syncronised and I can play them on my ipod. Please advise how I can find the original files on my pc.
    Thank you
    Carol

    I would copy over the entire thing if you have room.  With iTunes 10.4 though, you can download any previous iTunes purchases you have made in the past with your current iTunes account.  While in iTunes, look at the left hand side of your screen and select "Purchases" and look at the bottom right corner of the screen and select "Download Previous Purchases".  If you have an iPhone, iPod and/or iPad...you can do the same thing from each device.  Nice new feature...just remember that those ripped CDs need a back-up!!!  Enjoy...

  • My ipod classic 160gb will be playing fine then it sometimes freezes up or start shuffling through the songs not playing at all. After i reset it works ok for a while then same thing. Bought this so i could control through my steering wheel/radio.

    I sure hope someone can help me with these ipod classic 160gb issues.
    My ipod classic 160gb will be playing fine and then freeze up (unable to move around in it at all) and i have to reset it. This happens constantly whether in my car or when i listen at work. After i reset it works ok for a while then eventually requires another reset.
    Another problem is that it will be playing fine and then start shuffling through songs without playing them. The songs that get shuffled work fine in the itunes program but not on the device. A reset does not correct the problem with these particular songs.
    Also, sometimes when it is working and not freezing up or shuffling through, it will appear that a song is playing (in fact it says "now playing"), the song titlte is scrolling, but the song progression bar does not move. The count up in front of the bar stays at 0:00, and the count down at the end of the bar stays at the song length minutes not counting down. After I reset, it works fine and all the songs will play.
    The reason I got this thing was because i can control it through my steering wheel/radio while i'm driving. I previously had a Zune 80gb which i'm glad I held on to. I have over 6600 songs (so I'm obviously a serious music listener and obviously frustrated), but only about 10 songs were downloaded through itunes, the rest I either ripped or downloaded from other site. From what i've been reading it sounds like there's a lot of ipod owners out there experiencing similar problems. Does anyone have any suggestions to resolve these issues for me and everyone else? I got my first iphone 8 months ago, then the ipod and was considering an ipad. But in light of my ipod issues.....
    I hope someone can help me and convince me it wasn't a mistake to go Apple! Thanks!!

    I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
    After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

  • I was playing songs on Itunes while charging then my iphone 3 suddenly turned off. I pressed sleep and wake botton for 10 mins but no logo appeared.What happened?

    I was playing songs on Itunes while charging my iphone 3 then suddenly turned off. I pressed sleep and wake botton for 10 mins but no logo appeared.What happened?

    Sorry, but if you see the "connect to iTunes" screen on your phone, the only option is to restore, backing up the phone is not possible at this point, even importing the photos might not work anymore.
    Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support

  • HT4352 my aptv2 turns on homesharing when I launch a movie it plays for a while and then it stops and remove my libary

    my aptv2 turns on homesharing when I launch a movie it plays for a while and then it stops and remove my libary from where it should show my playlist any sugestion. it was wifif thoufgt it might be that so i tried ethernet wired and does the same any suggestions my connection is up when it shuts down

    Did you restore to factory defaults/new iPod and sync stuff to your iPod?  If you restore from backup there may be some corruption that is now in the backup.

  • Why my video stops for sometime while playing on vlc player

    Why my video stops for sometime while playing on vlc player?
    It started from last week. Whenever I play a video it stops for about 5-10 seconds and then continue playing. I have played mp4 and avi format.
    But unable to understand the reason behind it. If someone out here know the reason and also how to fix this issue, please lease let me know.

    Nope,
    But I just discovered that that it is actually not only the sound that stops working but rather the whole video that has a "hick-up" and then when it continues the sound is gone. If I fastforward/rewind then it seem like the player rocovers and play the stream correctly again.
    What are the Mp4 clip prefs you have used when converting?
    I am planning to try some other settings when converting to see if that makes any difference but I doubt it will help. I think we will have to wait for a "better" i.e. working Video Player for the iPod ...

  • Inserted a png PIP into my clip, can see it fine, can see it playing with the clip as expected when moving the play head manually, but cannot get it to play with the clip for preview, pleas help!

    I am sorry if my inquiry here seem dumb but I am a new iMovie user and cannot figure this out.  I inserted a png image into my video clip in the project as PIP, I can see it and move it and can also see it playing with the main clip if I move the play head manually, I can also see the PIP part only playing along with the undelying main clip if I use the Play button in the preview window when the PIP section is selected, however, for the life of me I cannot get it to play with the main clip all together for previewing the entire video via the video play button.  What happens is that the video plays normally and when the PIP section comes in, the video clip stop all motion during the duration of the PIP section and the PIP image itself is simply NOT showing.  Am I missing something really stupid here?  It seems as it the Picture On Picture is a separate clip that plays with the underlying main video clip if selected and played by itself but it is not part of the video clip and will not play with it.  What am I missing here, can anyone please help?
    Shony

    The easiest way to get up and running is to convert your MP3s to MP4s (obviously there won't be a video track). The following link links to a file that was an MP3 that I converted to an MP4 using QT Player Pro. When you go to export the files, make sure you click on "Options" and then check the box for "Enable Streaming" in the Streaming tab. It should stream flawlessly using QT Player. rtsp://rhsstreamit.rih.org/testmp4/Scorpion.mp4
    Make sure you place the media to be streamed in the proper folder. You should only get a "404" message if the physical file doesn't exist.
    Good luck!

  • When I press the play button for any music it switches back to pause immediately. Jim

    When I press the play button for any music or video it switches back to pause immidiately

    Have you tried giving your iPad a reset? HOld down the sleep and home keys until you see the silver apple. Let it reboot and try again. Sometimes when there's a glitch resetting can clear that up.

  • HT1725 I'm updating my OS and I paused it for a while then turned my PC off then when I opened it again the download was gone. How can I retrieve it?

    I'm updating my OS and I paused it for a while then turned my PC off then when I opened it again the download was gone. How can I retrieve it?

    "I'm updating my OS"
    Which OS?
    "and I paused it for a while then turned my PC off"
    Why?
    Just let it complete the download.
    "then when I opened it again the download was gone. How can I retrieve it?"
    If you mean iOS, select the iOS device in iTunes then click Update.

  • Please help me... music or play video, it pauses music/video for few seconds (2-7sec). kindly help what i need to do... will appreciate much...thank u  my MBP specs: 13 inch early 2011 2.3 ghz intel

    please help me... im having troubles using itunes, When i start listening music or play video, it pauses music/video for few seconds (2-7sec).
    kindly help what i need to do... will appreciate much...thank u
    my MBP specs:
    13 inch early 2011
    2.3 ghz intel core i5
    4 gb 1333 mhz ddr3
    mac os x lion 10.7.5 (11g63)
    itunes 10.7 (21)

    1. A 13" screen is awfully small to do any efficient editing. The 15" gives you significantly more on-screen real estate.
    2. All of the MacBook Pros can run FCE. However the graphics processor in the 13" model will limit some functionality with effects. See Tom's earlier comment.
    3. Not much difference. All these cpu's are fast. There will be more overall system performance gain from the quad core at the slower speed.
    4. FCE cannot use more than 4GB RAM anyway, so the 4GB that comes with every MBP is more than adequate. If you expect to use Aperture or CS5 then go for more RAM, otherwise there's not much reason to add RAM. You will be better off spending your money upgrading to the 7200rpm hard drive.
    5. Everything will be smaller on the high res screen; there are just more pixels (1680x1050) on the same 15.4" screen area. (I have a 15" MBP with the standard 1440x900 screen and it is beautiful.)

  • I made a drum track and it was fine for a while, when I went to play it again it only plays cymbals.

    I made a drum track and it was fine for a while, when I went to play it again it only plays cymbals.

    What is your output going to be for... DVD, BluRay... ???
    If DVD, you want DV AVI Type 2 with 16bit 48khz sound
    Also, The tutorial list in message #3 http://forums.adobe.com/message/2276578 may help

Maybe you are looking for