Pausing Problem with Epson R1800

After searching this as well as many other forums, I have yet to come up with a fix for this problem.
I am running Leopard (10.5.6) on my iMac. I am connected to the office printer (Epson R1800) via Bonjour. I had a problem with printing a couple months back and fixed the issue by installing the update for Ambrosia Software. Everything since then has been working fine, until now that is.
Every time I try to print something it connects to the printer then pauses. I hit "Resume Printer" yet it just keeps pausing. I've uninstalled the printer drivers, repaired the disk permissions, and reinstalled the drivers using the most updated version. Even after the fresh install I am still getting the pausing problem. Thinking that it was just my computer, I went to use a co-workers computer (iMac w/ 10.5.6) to try and print the document. The co-worker's computer is directly connected to the R1800 via USB yet when trying to print I still get the pausing problem. I've tried printing with Photoshop CS4 as well as Preview and get the same problem.
Has anyone experienced this problem? If so, have you found a fix for it? I've been racking my brain and just cannot come up with a solution.
-binaryskies

I have two xerox CP245s doing exactly the same thing. I can print to our color HP and our color xerox, just not the black & white ones. They have worked fine for two years and just started this pausing business yesterday.

Similar Messages

Major printing problem with Epson R1800 and 1.5

I have an Epson R1800 and Aperture 1.5
Any page that I try to print borderless has a quarter inch border around 2 edges. I've tried to calibrate but the two borders are way outside what the calibrate option can deal with.
This happens on all paper sizes. There is no option that I can find anywhere to fix this.
Every other app prints just fine, including iPhoto. It seems limited to Aperture.
Thanks, Bill

Behold the power of asking a question.
It fixed itself.
I have no idea how or why. But after 3 hours of working, it fixed itself in less than 5 minutes.
Thanks, Bill

Problems with Epson Stylus 3000 IP Ethernet

Problems with Epson Stylus 3000 IP Ethernet
The printer stops processing after reaching 1,72% of printing.
The Ethernet Cards led is on and blinking green.
I am running
Powerbook G4
OSX 10.4.5
Epson Stylus Color 3000 + Cups Gimp Print v4.2.7
I can se the printer in Epson MacAssist for OSX Ver 4.0.aE IP 10.0.0.6
I can se it as well in Safari under the ip adress 10.0.0.6
I have tried to test the printer in the Common Unix Printing System
I can see the printer there as well.
A test print here results in
"ipp" stopped unexpectedly with status 1
All my other printers work well and prints test sheets.
The printer has not worked since Tiger.

Can you please help me....
I can't seem to get the Print Set up utility to find the Epson Stylus 3000 Gimp.
I installed the GimpPrint Drivers that were on the Tiger 10.4.3 install DVD after I installed 10.4.3, and then updated 10.4.3 to 10.4.5.
When I first installed 10.4.3, I didn't install the GimpPrint Drivers. I went back to the DVD after updating to 10.4.5, and then installed the GimpPrint Drivers.
Can you please help me out in what I'm doing wrong. Everytime I try to find the Epson Drivers an "error:-50" comes up in the Printer Browser under IP Printer section.
Here's what I'm doing:
- I go into Printer Setup Utility
- I choose Add Printer
- I choose IP Printer
- I choose Line Printer Daemon - LPD
- I pop up the "Print using" and select the "EPSON".
- Then I choose "EPSON Stylus Color 3000 - Gimp-Print v5.0.0-beta2
- THEN I GET AN ERROR MESSAGE POP-UP! "An error occurrd while trying to add the selected printer. Error:-50"
Where did you find the:
Epson Stylus Color 3000 + Cups Gimp Print v4.2.7
Thank you for you help in advance!
Micdim
G4 Dual 1.42 gig Mac OS X (10.4.5) 1G Ram, FCStudio, Logic Pro 7.1, Adobe CS2, After Effects 7, MSOffice 2004...

Printing Problem with EPSON LX 300+

Dear all,
I have met a problem with Epson LX 300+. After I set up printing on PLD, the result printing is bad. Font and setting are not the same as preview in SBO. How to solve this matter..? I used SBO 2005A PL 43.
Thanks for your help....
Regards,
agung
Edited by: Agung Adrianto on Aug 28, 2008 8:17 AM

Hi Agung,
Here is a way out for the issue you have submitted. I can't guarantee that this wayout work perfectly:
Question:
As we know that the dos matrix printer supports dos prompt and thus printing speed and
life of the printing head is comparatively more than what we print the same in graphical format.
So when I tried to print from SAP Bone in dot matrix printer, the printing speed is very slow and quality of printout is not good enough.
Any clarifications on this regard would prove very helpful to me.
Regards,
xxxxx
Consultant Business solutions.
Solution:
Do you use one of this printer types:
Dot Matrix, Printer, Needle Printer, Citizen ProDot 300 , Oki Microline, Epson FX880, Epson FX890 ?
Here the stepwise I have tried :
In order to print using Dot Matrix printers, follow the below
instructions:
1. Run SAP Business One.
2. Click the upper menu 'File' and select 'Page Setup'.
3. The Print Setup window opens. Under 'Paper', in the field 'Size', select 'Letter' from the drop down menu.
4. Click OK to confirm your selection.
5. On your desktop, click Start => Settings => Printers.
6. Right click on the required Dot Matrix printer and select 'Printing Preferences...'.
7. Click the 'Paper/Quality' tab page and click the 'Advanced' pushbutton.
8. Under'Paper/Output'=> 'Paper Size', click on the underlined paper size(e.g. A4) and select 'Letter' from the drop down menu.
Note that if you leave the value 'A4', each page will be spreaded over 2 pages when printing using Dot Matrix printers.
9. Under 'Graphic'=> 'Print Quality', click on the underlined value (e.g. 230X250 dots per inch) and select '120X144 dots per inch' from thedrop down menu.
Note that in case the value '120X144' is not available you should select a similar value from the list.
I did not test it yet and I am not so sure about the result but you could test it.
Rgds,

Color Settings with Epson R1800

Hi
I am using an Epson R1800 with Photoshop CS5 and Lion. When trying to print I do not have the color management option and under Print Settings Color: and Color Settings: both are greyed out. This problem does not occur with my Epson D68 or when using Numbers and TextEdit.
Any advice would be much apreciated.
Peter

Every printer has different drivers and different functionality. You can either continue looking through the printers print dialogue to see if it supports the feature you're looking for or you will need to put in a feature request to Epson and hope on later revisions they include it. Because the print drivers are supplied to Apple from the printer manufacturer Apple has little control over the drivers.

Printing problem with Epson R290

I am running CS2 on Leopard and have recently purchased an Epson R290. The first time I used it with Illustrator and InDesign it worked fine but now whenever I print anything it prints a tiny version (about a sixth of the real size) of the design in the top left corner of the page. It does this both with new documents and old ones that used to print ok.

Since I posted the message about this problem I have discovered that it can be worked around by choosing a higher quality print. ie if you choose plain paper when printing from Illustrator or InDesign the printer prints a reduced size image but if you choose Ink jet mat or glossy the print comes out fine. I don't have this problem with Photoshop but that may be that I always print high quality from that application. I don't use Appleworks Draw so don't know whether this solves the problem for that application but iWork documents print ok.

Printing problem with Epson R290 Illustrator and inDesign

I am running CS2 on Leopard and have recently purchased an Epson R290. The first time I used it with Illustrator and InDesign it worked fine but now whenever I print anything it prints a tiny version (about a sixth of the real size) of the design in the top left corner of the page. It does this both with new documents and old ones that used to print ok.

Since I posted the message about this problem I have discovered that it can be worked around by choosing a higher quality print. ie if you choose plain paper when printing from Illustrator or InDesign the printer prints a reduced size image but if you choose Ink jet mat or glossy the print comes out fine. I don't have this problem with Photoshop but that may be that I always print high quality from that application. I don't use Appleworks Draw so don't know whether this solves the problem for that application but iWork documents print ok.

Printing problem with Epson photo 2200

I have a Powerbook G4 running the most recent version of OSX. I can no longer print to my Epson Photo 2200. When I try and print the Printer window pops up, and the job automatically stops without printing.
I have tried uninstalling and reinstalling the 2200 driver, I have hooked up a Canon printer to the powerbook (and this printer works fine with the powerbook), I have printed a test sheet on the 2200 (which is done without a connection to the Powerbook and it printed fine). The problem lies in the computer printer connection (I am using USB for the link).
Any help you can provide would be greatly appreciated.

I had a similar problem with a Epson Stylus Photo R800. The printer would not print Word docs or DVD media using the most updated software from Epson. After going through two printers I paid a consultant to come in on a Saturday night who told me that communication errors between Epson printers and current versions of the MacOS are encountered every day in his business. And neither Apple or Epson address the issue directly.
To get the Stylus Photo R800 to work we had to reconfigure the driver to deal with Manual Feeding of documents and DVDs. It took about an hour of experimentation but once done...with no help from Apple or Epson...the printer did work very well. However, the Epson Print CD software is a total bust. We found a third party solution called DiscLabel that allowed us to print DVDs with the reconfigured driver. I'm disgusted with both Apple and Epson because Epson sells printer with the promise that it will work with the MacOS when three hours of struggle with useless software proved otherwise.
If others have a better experience or know of simple solutions to the Epson Print CD problem please post them.
Thanks in advance for tolerating my rant.
Powerbook 167 GHz PowerPC G4 Mac OS X (10.4.6)

Playback after pause problems with ipod

I have noticed a common problem with my iPod Classic when dealing with long audio tracks such as podcasts. when I pause well into a podcast and then click again to resume, I often find that the track resumes from the beginning, not where it was paused. Is this a known or fixable problem?

You could try resetting the Firmware... Plug it into your computer, and open iTunes 7.0, when your iPod shows up, click on it and click Restore, this will restore your iPod to the original settings and firmware.
If you cannot get the iPod to plugin and sync with iTunes, you might want to call AppleCare for more information.

G5 with Epson R1800

Hi,
I have 10.4 OS with a Epson R1800 connected via USB. However when I try to print from illustrator an error comes up with Media Out or not loaded correctly.
I also have a ibook connected via printer sharing and when I print the ibook using Illustrator it works ok.
ANy ideas?

When you connect your Mac to another Mac that is sharing a printer (be it local or networked) you are connecting to the spool queue provided by the other Mac, or in other words 'the path to the shared network resource'. This is computer term - nothing to do with Windows...
If you see the options when you connect directly (I think it would be USB - never heard of a printer connecting via FireWire) then as you say the driver is correctly installed locally. If they fail to appear after connecting to the share via the Printer Browser/Default Browser window, then it will have something to do with your local setup.
Basically what you want to do is use your local driver to print via the shared connection. So you have to override the default setup. First of all you have to ensure your local install of the driver is called the same as the shared printer? This will have an impact if it isn't as your Mac doesn't think it has the correct driver installed. Also, if you added the shared printer before you installed the local driver, then OS X will have configured the driver and assume these 'defaults' when you try to create a new printer connection. So try deleting both the shared and local R1800 printer from the Printer List, restart your Mac, and then add the local printer first. Once this has been setup then try adding the shared printer. If this doesn't work, you would have to 'Reset the Printing System' and install the printer again. However note that this will delete all printers from the Mac so only do it as a last resort and if you are prepared to add all the printers again.
Also, do you have the Mac's communicating via TCP/IP or is only AppleTalk enabled? If it's the latter, then I have seen this impact the availability of the extra driver options.

HT1338 Problems with Epson Perfection 1260 Scanner following latest update

I am having problems with my Epson Perfection 1260 Scanner since the latest update from Apple.

Not sure this will help, but sometimes resetting the printing system helps. All your printers will be deleted and need to be addeda again:
http://support.apple.com/kb/HT1341

Elements 9 printing problems with epson 3880

HI All:
Elements was working fine with epson 3880.
Problems developed:
1. Would print color pics in black and white only while in Editor; color pics printed ok in Organizer
2. Now Print Preview does not work in either Editor or Organizer
3. Now cannot print in either Editor or Organizer
I purchased Elements online. I do not have a CD for reinstall.
Any help would be appreciated.

I am having a similar problem that seems the reverse of yours in a way, though it may be related. Mine occurred only with the disk-installed version, not the downloaded trial version, and it was present from the start on my iMac. Everything worked fine with the 3880 and 2400 printing from the trial version of PSE9 (downloaded), just as it had with PSE8. CS5 and Apple Aperture are also installed and had been working normally. Then I received the install disk for PSE9 and installed it. After that, Preview did not produce a preview, PDF did not produce a PDF, and Print did not produce a print. CS5 also would not preview or print after that. Aperture, however, was unaffected. Some experimentation revealed that the problem occurred only with "Photoshop Elements Manages Color" selected and printer color management turned off. With "Printer Manages Color" selected, it printed.
I uninstalled both CS5 and PSE9 and reinstalled 8, which once again worked properly. Hoping there had been an install error as the cause of the problem with the original installation of 9, I then uninstalled 8 and reinstalled 9, and the problem recurred. So it's back to PSE8, and try to figure out how to call the problem to Adobe's attention without paying for a tech support session. Interesting that a glitch that causes a problem with PSE's printing can also affect PS's printing.
I suspect your problem is related to mine. Do you use a Mac? I think the reason the problem didn't occur at first with my system is that the trial installation is not the same as the paid one, if only because the trial version doesn't have the user sign up with Photoshop.com or whatever it is, which I had never done until I installed 9 from the disk. So it seems that something in the full, purchased version is causing the glitch. I have no idea why your version should have worked at first, then crumped.
Two more things I'm going to do now: reinstall CS5 on the iMac (should be OK, as it was before I got 9), and install 9 on my laptop to see what happens.
My advice for now is to download the trial version of 9, uninstall the current installation of 9, install the downloaded trial version, and (without entering the serial # from your downloaded version) see if it works properly. Then contact tech support. Especially if you have a Mac, tell them you have heard from others who have related the same problem to you.
—howard

Problems with EPSON L355 Series in Yosemite

Hi! everyone!!
After install Yosemite in my Macbook Air Mid 2013, I have some problems with the printer EPSON L355 using Wi-Fi, the Mac show the printer in standby (yellow) and I can't send files to print, I try shutdown the wi-fi and when turn on again, the printer appears in green (on), but after the print the indicator in System Preferences turn yellow again, and I need to repeat the same thing every time that i need print another document, I have other computers (PC) in my network and they can print in any moment and I have a MacbookPro 17" mid 2010, with Mavericks and print very well, my Macbook Air had Mavericks too, but I made the upgrade to Yosemite the same day that has been released.
What I can do for fix the problem in Yosemite? or I need wait for more updates?
Thanks very much.

Thanks a lot uk2704
I was trying many things, original cd, download drivers, etc, but I did try this download and my print L355 goes awsome.
Good luck for every one!!!!!

Problems with Epson R2400 printer and Mac

I'm a photographer and I switched to an imac a while ago. When I tried out my Epson R2400 printer, it worked really awful, comparing to when I used it with PC. I still haven't managed to fix these prolems. The printer menu is diminished (less options, many inaccessible in grey), there are problems with print density, with color adjustment, what I see on my screen is not what I get on my print (a black and white photo in grayscale mode can appear almost light blue when printed), there are even alignment problems (centred photos appear closer to the left edge of the paper). And I don't have a clue why all this is happening. The printer driver I installed is apparently the latest one. So I don't know where to go from here. I have installed and I use the profiles of the specific papers I'm using, but the results are NASTY. Please help.

By the way, I have read the links under "More like this", but those threads don't seem to clarify my question. Originally I had installed my Epson driver from the original (old) Epson CD. When that didn't work I uninstalled and installed the newer Epson driver from the Epson's site. Doesn't work and the problems I'm having are the ones I mentioned above.

Dark prints with Epson R1800

Having upgraded to Snow Leopard, when I print to my Epson R1800 from Lightroom or Photoshop, the prints are extremely dark, and a bit oversaturated. I am printing by choosing a paper profile, and turning off color management in the driver. This worked perfectly before Snow Leopard. If I tell Lightroom to let the printer manage color, then use Epson Vivid with Gamma 1.8, the print is reasonably good. But if I can not choose a profile, I will be limited to only Epson papers.
The latest Apple update for Epson print drivers only contains the Gutenprint driver for the R1800, so I downloaded the latest Snow Leopard drivers directly from Epson. I believe I thoroughly removed the existing drivers before installing.
I am seeing some discussion about this here and other places online, but no solutions that work so far.

Wait a second, I just realized something very important. If you go to the Epson Drivers page for the R1800...
http://tinyurl.com/2gp4g9
The first link there is a Drivers and Utilities Combo Package for MacOS 10.6 (i.e. Snow Leopard). But the driver that this combo package actually contains is version 6.12, which as listed further down the page, is from 12/18/2007.
So in other words, there really is no Snow Leopard support for the R1800.
Also, the R1800 is not in the product list on the Epson Snow Leopard page...
http://www.epson.com/cgi-bin/Store/support/SupportSnowLeopard.jsp

Pausing Problem with Epson R1800

Similar Messages

Maybe you are looking for