Pavilion 22bw monitor - problem with Windows 7

Hello all, I have lately been having a problem with my HP Pavilion Slimline Windows 7 PC recognizing my HP Pavilion 22bw monitor (purchased separately from the PC). This problem was, for a while, sporadically popping up after the computer/monitor went to sleep and "reawoke", but is now basically happening every time I reboot.
The basic problem is: The monitor display is always at a low resolution and is often weirdly offset to the right, and the desktop extends beyond the screen. The display settings under Windows (Windows 7 Home Premium,  6.1.7601 Service Pack) only recognize the monitor as "Generic Non P&P Monitor". This is new and concurrent with the problem, as I have used this monitor and its HP driver with no issues for months.
I have tried re-installing the display drivers, fiddling with the power management settings, and plugging/unplugging the monitor, all to no avail. I tried manually setting resolution through the software and the display hardware as well.
Any ideas? Could it be a conflict with the graphic driver (onboard Intel)?
The strange thing is this started happening with no other computer changes, like new hardware/software, occurring, to my memory.
Thanks much to any who might have some insight.
tcoreyb

Hi tcoreyb,
What version of Win 7 (32 bit or 64 bit) and what is the product number of your Slimline PC?
Try setting the monitor back to factory settings using the monitor's On Screen Display. If the symptom persists, then navigate to Control Panel - Device Manager - Monitors and uninstall the current monitor display driver.
Reboot your system. If the symptom persists, try installing the HP monitor display driver and utility tools found here  if your operating system, (OS), is 64 bit or here  if your OS is 32 bit.
If this does not correct, then try reinstalling your Slimline, factory installed, Intel graphics driver via HP's  Recovery Manager driver reinstallation instructions.
Can you test the monitor on a different computer? That may help to isolate the problem to either the monitor or a graphics driver problem.
Jaco
****I am not an HP employee****
Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
+++++++++++++++++++++++++++++++++++++++++++++++++++++
H8 1380t CTO, Intel i7 3820
16 GB DDR3
Pegatron Motherboard- IPIWB-PB (Pittsburgh), Radeon HD 7570 1GB. Win 7 Home Premium upgraded to Windows 8.1 Pro.
Envy Phoenix 810-150se, Intel i7 4820k
12 GB DDR3
Pittsburgh2 Mainboard, NVIDIA GTX 645- 2GB GDDR5. Win 8.1 Pro.
HP 560z CTO AMD Phenom II X6 1090T
16 GB DDR3.
Radeon HD 6570
Win 7 Home Premium upgraded to Win 7 Pro.
HP ENVY 17t-j000 CTO Quad Edition Notebook. I7 4702mq
12 GB DDR3
Nvidia Graphics
Win 8 Pro
Errare humanum est.

Similar Messages

  • If HP Pavilion 20xi monitor compatible with Windows 8 64-bit?

    I Have a Hp monitor, Pavilion 20xi, and I am planning to plan a new MB, but it will have the operating system Windows 8 64-bit.  Is this current monitor that i have compatible with Windows 8 64-bit?  I currently have Windows XP.?

    Hi justme27, welcome to the HP Forums. Yes, this monitor is compatible with Windows 8 64bit. Here are the monitor drivers:  HP Pavilion 20xi IPS LED Backlit Monitor Driver.
    I hope this helps.
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Pavilion 23xi monitor - problem with screen going blank

    Hello there, Recently, the screen on my 23xi monitor started to go blank after some usage (the time varies).  When this happens, the power light on the right corner of the monitor remains lit, however the power button doesn't do anything when pressed.  I don't think it's my computer putting it to sleep, since I've already checked my power settings for that, as well as the ones on the monitor's OSD.  The only way I can get a video image back is by unplugging and replugging the power connector located on the back.  I've had the monitor for only a year and a half.  Any ideas? Thanks!

    Is there any fix for this please as the exact same thing is happening to me. I've had the monitor 1 and a half years, and for the last week, on either VGA/HDMI/DVI, and connected to either my PC or games consoles the screen will effectively freeze after a given period of time (always after around 20 mins or 30 mins of use). The power light stays lit and can't be switched off, the only way is to unplug from the wall, which is very annoying. According to HP website the 1 year warantee expired in June 2014 so I am not sure what I can do to get this resolved, but a monitor should last more the a year and half, all my other monitors are 3-4 years old and still working.

  • Problem with windows and my monitor in after effects

    HI . before any thing excuse me for speeking english.
    i have a problem with windows in after effect in my monitor
    my monitor is 15.6 and resolution is 1366*768
    for example when i open interpret footage window i can't see that complete and amount of size window dont visible.
    Thanks.

    Your system doesn't meet the requirements and that is that. AE has required 900 pixel height ever since CS4. Other than changing your screen res or shuffling around windows there is nothing you can do.
    Mylenium

  • HP 250 G3 - problems with Windows 10 boot

    I have problems with Windows 10 boot on my HP 250 G3. It often shutdown during boot. But boot is ok with Windows 8.1. Please release upgrade that solve this problem.

    SomeoneWithAnHP wrote:
    Guys this might be solution: Turn off your laptop. Disconnect all devices connected to the PC. Remove battery and disconnect from wall. Press the power button at least 20 seconds. Connect back battery and turn on your PC. It should be fixed by now, I did with my Pavilion 14, and both sleep and turning off problems were fixed.re:  Black Screen and Dead keyboard after locking computer. I tried this with my Envy 17t-3200 3D CTO.  Didn't help.  for this computer this means removing the back cover and unplugging the battery wiring harness form the Motherboard. I currently have sleep mode disabled when on AC and am still getting the black screen, dead keyboard lockup.  I really know I'm hosed since even the caps-lock is non-functional. I see this problem more when I'm at work were I tend to Win-L lock the screen when I walk away from my desk.  Seems like locking the computer then letting the screen blank is doing something evil. After I force a reboot, by keyboard backlight forgets it's setitngs and returns to full brightness. If I lock the screen then bring back the computer before the screen is blanked, it seems fine. I don't think there's any way to adjust the screen blanking when the lock screen is up (even my desktop power-saves the monitors after a few minutes on the Lock screen). I'm not sure it's HP or MS that should be looking into this.  My computer is about 3 years old so I can't pester HP with warranty requests. I'm not sure how prevelant this problem is. Are all Pavellions and Envy's having the problem?  Mine has Radeon graphics which was a bit unusual at the time.  I have to install the HP Display driver before any AMD updates or the screen dimming doesn't work (at least with win 7 and 8). Dave.  

  • Dual Monitor Problems with Vista

    I have a Lenovo T61 laptop running Vista ultimate 32 bit, SP1. I schlep this back and forth from home to work and put it in docking stations at each location. The docking stations have external monitors attached. At work I have a Viewsonic VX2035wm 20" Wide screen, (16:10) monitor with optimum resolution of 1680x1050. At home I have a Viewsonic VA912b 19" standard aspect ratio monitor with a suggested resolution of 1280x1024.
    I typically run in dual monitor mode using my laptop display and the external monitor and extend the display across both monitors. Sometimes I run with the laptop display as the primary monitor, sometimes the external is the primary.
    When I take my system from one location to another, generally upon boot or resume it recognizes the different monitor configurations and adjusts the display properties accordingly. However, about once a week I have a problem. For example, I shutdown at home, came into work and attempted to boot the system. Upon boot my external monitor displayed a frequency out of range error and did not display anything else. I suspect that the external port was configured to a setting that was not supported by the monitor. It appears that this was the primary display because my laptop only showed the background and the desktop did not display. Since nothing was displayed, I couldn't click the start menu, any icons, etc. I tried to adjust the monitor configuration by right clicking the laptop screen and selecting personalize, but the personalization dialog would not show up and I suspect that it went to the blanked out external monitor.
    Please advise on how I can handle this situation. Is there any way to move the display from the external to the notebook when this happens? I noticed that Viewsonic has Vista drivers listed on their web site. Would it help to download and install these? Is there anything else you can suggest?

    The main point of posting this topic was to point out the appalling service offered by Adobe but, of course resolving this issue would be nice also.
    So here goes;
    Dual monitor issue (Applies to CS4 applications; Photoshop, Illustrator, InDesign etc. but not Flash or Dreamweaver or any other manufacturers software).
    I have 2 monitors installed with Windows Vista 64bit, using Nvidia Quadro FX 1700:
    -1280 x 1024 (primary display on the left) &
    -1440 x 900 (on the right)
    With a CS4 application maximised in the larger monitor, all the drop down menus display fine, if the chosen drop-down menu is taller than the height of the monitor (fonts, for instance), an arrow appears at the bottom of the menu so that I can scroll down the rest of the menu. If I then reduce the size of the CS4 application window, move it to the smaller monitor and maximised it again, the drop-down menu (which displayed and functioned fine in the primary monitor) is cropped off so I can't access the rest of the menu.
    This might seem a minor irritation, but for batch-processing of merged files (the main purpose for having 2 monitors) CS4 makes the 2nd monitor redundant.
    Another, less irritating issue (again, only with the applications named above) is that the window when maximised in the secondary monitor 'hangs over' into the primary monitor.

  • Hi anyone having a problem with windows 7 and itunes

    Hi has anyone had a problem with windows 7n and Itunes...My Itunes was working now wont open says files missing reinstall...which I have done several times also other programs that were working now have error message your side by side configuration isnt correct any ideas!!!

    Yes, I am also having trouble with my windows 7n.  I tried to install the download but it didn't have 32 bit for my computer and I don't think it will help me see my phone on my external devices. I can't transfer my photos. Any help would be appreciated.

  • Problems with Windows XP SP3 in Boot Camp

    Hi,
    I have recently received a 21.5" iMac; it is the higher-end of the 21.5" standard configurations. The problems I am having, I believe, specifically relate to drivers.
    Firstly, I get no sound whatsoever in Windows XP SP3 (boot camp); I have tried removing and reinstalling the drivers from the Snow Leopard install disc, but no success. I have no yellow question marks in the device manager window, but the absence of audio still persists.
    Secondly, I cannot gain access to the special functions of the Apple wireless keyboard in Windows XP SP3 via Boot Camp. Again, I have tried reinstalling the drivers, but no success. I have read an Apple support document which states that the keys are only supported on late 2009 Macs; I own one of these Macs, so that cannot be the problem.

    Problems with Windows XP SP3 in Boot Camp
    Boot Camp forums are here: http://discussions.apple.com/category.jspa?categoryID=237

  • I am having a problem with Windows Fusion installed on a MacBook.

    I am having a problem with Windows Fusion installed on a MacBook OS 10.  When attempting to use a Browser, (either IE, or Chrome), under Windows Fusion, I cannot browse to ANY page except Gmail.com.
    I checked all security settings, and found no problem. Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!
    I am not sure if I have some virus on my Windows side, because Google and Safari both work perfectly on my Apple side, just not when running Windows Fusion.
    Is there some setting I am missing, or do you think I have malware/virus issues?? My Internet connection is DEFINITELY working fine - I can send, receive, open, and close all my email on Gmail only, and can navigate freely on Gmail, but cannot get to any other site even hyperlinked to Gmail.
    Any help would be greatly appreciated.
    Thank you very much.

    HartEJ wrote:
    ...Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!...
    If you've already tried my previous suggestions, it may be that something has tampered with the DNS settings in your Windows VM, which might bypass the settings your Mac uses. Assuming you're using Windows 8, these instructions explain how to check and change the DNS settings. There's also a link in those instructions listing a variety of suggested DNS settings. If you do try changing the settings, record what the settings currently are in case you want to return to them.

  • Looking for a site that shows problems with windows patches or updates.

    Looking for a site that shows problems with windows patches or updates...so I know what not to install.
    Plenty of sites list and summarize individual patches, I want one that consolidates problems and complaints so I can better assess the risk. Currently I'm waiting to install patches several days and doing google searches. That works, but I'd rather find a place
    that does it with expertise.
    Which forums would be best to look for such problems.
    Thanks in and advance for suggestions

    Hi,
    I agreed with Cyber and Rick.
    Windows update helps to keep your PC safer—and your software current—by fetching the latest security and feature updates from Microsoft via the Internet.
    Although there might be some problems when installing it, Windows update is not the one to blame.
    For troubleshooting Windows updates, if needed:
    Fix Microsoft Windows Update Issues
    http://support2.microsoft.com/gp/windows-update-issues
    Best regards
    Michael Shao
    TechNet Community Support

  • Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

    Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

    Go to "control panel" then "add or remove programs".  Highlight "Apple software update"  Choose "change" click "Repair"  This should do the trick.  Then download and install iTunes 10.5 again.

  • Tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

    I tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

    Firstly, are you installing iTunes for the first time or are you updating your current version of iTunes?
    If you're installing iTunes for the first time have you tried redownloading the installer package? Perhaps the file you downloaded originally is corrupted...
    http://www.apple.com/itunes/
    If you've tried that, then try installing iTunes as your computer's administrator. To do this right-click the install package and choose "Run as administrator".
    If you're updating iTunes to the most recent version try repairing the Apple Software Update program on your computer. It's under the add/remove programs.
    1. Open the control panel
    2. Open Add/Remove programs (called "Programs and Features" in Windows 7)
    3. Navigate to "Apple Software Update" in the list and click on it
    4. Click on "Change" then select "Repair" (or just select the repair option in Windows 7)
    Once you repair this, try running iTunes and the update again.
    Fingers crossed!

  • Problem with Windows Media Player since installing Firefox 4.0

    Problems with Window Media Player. When I am using Windows Media Player to view a video from another source I am having problems. When I hit pause and then go back to hit play it does not have any sound. The player is not on mute and it keeps going from pause to play with no sound most times. Please help. Thank-you. I have Windows Vista programs.

    What can I do to get the Windows Media Player to work properly?

  • Problems with Windows VISTA and WPA-2

    Hi Guys,
    I am using a Linksys router supporting draft-N; it seems that after some time of usage; Windows Vista stop being able to connect to Linksys using a WPA-2 PSK.
    Everytime you search for the SSID and attempt to connect, the ''network is taking too long to connect''' and Windows always informs the user that ''limited or no connectivity'' even though the signal strength is excellent.
    Is that a common problem in Windows Visa (I am using Home Edition)?

    Yes thats the basica command problem with Windows Vista while connecting to the Wireless Network.... In this you can need to update your Windows Vista OS with all the Latest Patches and the Service Pack to improve more stability on your Vista Computer to get connected to the Wireless Network..

  • Photo sync problem with Windows Vista?

    I did some searching and was wondering if there is a solution to the photo sync problem with Windows Vista. I have gone the route of changing some of my photos to bitmap files but this is was way too much work just to view on ipod. I like to email Apple but could not find a link to do so. As far as I know I have all updates but still the iPod does not sync photos. Is there an update to this that I am missing or am I stuck changing all my photos to .bmp files?
    Thanks,
    Dean.

    I checked out the article and not much help, thanks anyway.
    Would it make a difference if I purchased Adobe Photo Album or would I still be stuck with changing and saving files to .bmp extensions? I have Adobe Photoshop album starter but still have to change file extensions.
    If someone has a solution to this problem I would really be greatfull. I did contact Dell as this is a brand new computer and that was a wash. They did give me a number for Apple but of course I bought the iPod off of ebay and has no warranty on it so unless I pay a fee I'm not calling. It just blows my mind that Microsoft and Apple can't or won't come up with a fix. But I guess when Microsoft wants you to buy the Zune or Apple wants you to buy the overpriced Macintosh why would they waste time on having there products compatible with each other.
    Thanks.

Maybe you are looking for