Pavilion 23 AIO touchsmart CDROM drive not reading disks

The CDROM drive on my computer is not working. Well, it is not reading discs. I have tried several cd's, uninstalled the drive, and made sure it was not gunked up.  I can hear the drive *trying* to read the disc, but opens and says to install a cd.  Any other suggestions? Will I just have to replace the drive? The computer is fairly new (under 1 year old).  

Hi, Please try     Run now     from the following link:
  http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
or:
  http://support.microsoft.com/kb/314060/en-us Regards.

Similar Messages

  • Drive not reading disks

    I've had my MacBook for approx. 3 months now. I went to burn a CD this morning with iTunes, insert the blank disk, and it makes a funny noise while it tries to read the disk then ejects the disk automatically. Does the same thing with all CD's and DVD's. What do I need to do? Anyway to fix this without sending off to Apple?

    You might want to try running a cleaning CD in your '12 PowerBook G4's optical drive. If dirt gets on the laser lens it can cause read errors to occur & ejecting of the disc due the Mac's inability to read the disc properly. The cleaning CDs have a special cleaning brush/fiber built into them that knocks the dirt/dust loose of the optical drive's laser lens.

  • CDROM not reading disk - A305-S6825

    Toshiba Forum Readers,
    My CDROM is not reading disk and when i put a cdrom disk in the reader it does not show up in my cpu directory. Please help.
    I have a Toshiba Satellite Laptop - A305-S6825
    Please email me back at My Personal GMAIL account by clicking here. Thanks for your time
    -Andy Cabaniss
     [email protected]

    Hi Michael!
    Congratulations!
    Perhaps you would like to mark your question as answered, and the relative posts accordingly!?
    What are question answers?
    When a community member posts a question as a topic starter, other members can post an answer in reply. Please note that not all replies actually answer the question.
    In some cases, an answer can be just some hints or helpful information to help the poster solve an issue. The originator of the topic can mark such a reply as a Helpful post. In other cases, a community member may post a specific answer that provides a solution to the original poster's issue. The originator can then mark this reply as a Solved post.
    The original topic poster has the choice to mark replies as either Helpful or Solved, or not mark a reply at all. In addition, the originator can end the discussion by marking the topic as Answered, which provides a visual cue—a green star—to the community members. This lets everyone know that the topic contains valid helpful information.
    Note: Only two replies may be classified as Helpful and only one reply may be classified as Solved in any question topic. Non-question topics do not offer these classifications.
    This info, and more, can be viewed by clicking on ? Help & Terms of Use, located under your login name, on all "Discussions" pages.
    Enjoy your Panther experience, and repost with any questions you may have!
    ali b

  • My DVD drive not reading DVDs, but can read some DVDs with data on it. Device manager shows no error

    My DVD drive not reading DVDs, but can read some DVDs with data on it. Device manager shows no errors.
    I tried to reinstall driver.
    I downloaded new codec
    I tried Microsoft FIX IT
     Nothing worked.
    Need some help.
    Thank you!!
    Paul

    Hi Albos, This is a known problem. These superdrives die after a while. See the various threads on this site and the internet. I have the same problem with my Imac 20" 2.16 ghz. Just wants to burn and read cd's. Its has to do with the laser. For DVD an CD are two different laser and the one for DVD's has probably died in yours (as it did in mine). I bought an external LG burner and problem solved. (And a lot cheaper than replacing the superdrive)
    Hope this helps you.
    Robert

  • CD drive  not reading Audio or Photos intel core 2 duo Mac - says there is nothing on disc / Blank  - Is there a fix ??

    CD drive  not reading Audio or Photos
    intel core 2 duo Mac -
    says there is nothing on disc / Blank  - When there is
    Is there a fix ??

    At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Disc Burning & report what it says, like ...
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW, +R DL
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.

  • EMac External LACIE DVD Drive not reading.

    eMac External LACIE DVD Drive not reading.
    eMac 700 MHz running OS X 4.4
    Came without DVD or modem internal
    Has 256mb memory
    Bought a used Lacie 1394 Firewire DVR External.
    Was able to burn DVD’s and CD’s with Toast 6 Light.
    Cannot find the “DVD Player” on the hard drive.
    It will read data DVD.
    eMac will not read any movies burnt or bought.
    I was told I probably need more memory?
    Thought running IDVD would fix the problem.
    No Soap.
    This machine was giving external modem problems before Tiger was installed.
    Before we spend more money or just get ride of the eMac.
    What is the DVD problem?
    This same Lacie burner reads and writes DVD and CD fine with our iMac 450 DV 320mb memory. Running 9.2 and X.3

    OS X 10.3.x / 10.4.x natively support data burning to external DVD drives but video payback requires software such as iDVD which isn't installed by default on models without an internal DVD drive (the installer sees no internal drive and thinks it's unnecessary). Try downloading VLC Player and see if that will let you play movies.

  • Equium A110-233 drive not reading any discs - error code 39

    Drive not reading any discs.
    Something to do with driver. As far as i can tell it says code 39 error.

    Hi
    Please try the first method:
    http://support.microsoft.com/default.aspx?scid=kb;en-us;320553
    There you will find a link to the MS website which provides a nice solution.

  • Hello ,my dvd rw driver (f:) in my hp pavilion dv7-3186cl entertainment notebook can not read cd's o

    Hello ,My DVD RW Driver (F, in my HP Pavilion dv7-3186cl Entertainment Notebook PC / Operating System 64-bit, after installing new hardware ( printer ) can not read CD’s or DVD’s is not working ,How can I fix it?

    Hi,
    First, try the automated fixit from Microsoft on the relevant link below.
    Windows 7
    Vista
    Check if the drive is now working.
    If it still doesn't work, click the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'.  In to the prompt type the following command and hit enter.
    sfc /scannow                 ( note that there is a space between sfc and the / )
    Let the process complete, then type exit and hit enter. 
    Next, click the Start Menu, open the Control Panel and click on Device Manager.  Next click to open DVD/CD-ROM Drives.  Right click the drive and select uninstall.  Do not delete drivers if asked.  When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ).  Let windows reinstall the drive and see if it now works.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Pavilion g6 not reading disk

    Hello, 
    My Notebook will not read any disks i put in. I can hear my laptop run for a few seconds after i insert it then nothing. It just wont register that a disk as been insterted. It is mostly DVDS that i wish to use.
    In this PC it comes up as "DVD RW Drive (E"
    HP Pavilion g6 Notebook PC, window 8.1
    Please help. Im not sure what other information you will need or what else i could tell you.

    For step 2, as a result it say Media in CD/DVD drive is not readable (hp DVD-RAM UJ8B1 SATA CdRom Device) not fixed. Eveything else listed was "fixed:
    Im a little unsure about steps 3 and 5 as i have never really understood what it means for me to run as an administrator, and what the password this is.
    Im sort of working on the first part of step 4, not entirly sure what i need to do.
    Im not very technical 

  • CD Rom drive not reading data or audio

    Hello -
    I'm using a Fujitsu N series LifeBook laptop. I'd started having problems with my cd rom drive about 6 or so months ago. It reads dvd discs just fine, but is very "selective" about the audio cds i load. I got a palm pda for christmas and when i tried to load the sync software from the cdrom - the drive wouldn't read it at all. I tested other audio cds and have since found that the drive will no longer read any audio discs. Oddly, it reads dvd movies just fine - launching Windows Media Player as a default. I got in contact with Fujitsu tech support, and after uninstalling/reinstalling the cdrom, found the problem was still there. I was told to contact iTunes support because iTunes might be the culprit - but could only find these forums for help.
    Cdrom drive is a TEAC DW-224E-B model. Please help - I'm a nursing student and plan on using the palm pda to store PDR's and Diagnosing guides.
    Thank you,
    Erick

    here is the report generated - and thank you
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    FUJITSU N6010
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: ATI MOBILITY RADEON 9600/9700 Series \ATI MOBILITY RADEON 9600/9700 Series
    IDE\DiskFUJITSUMHT2060AT_PL____________________0022___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomTEACDW-224E-B__________________________4.6A___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: TEAC DW-224E-B, Rev 4.6A
    Drive is empty.
    it says the drive is empty after i've inserted the palm cdrom into the drive

  • HP dv6 DVD drive not reading DVD's

    Hi, my HP dv6 is currently running windows 7 and for some reason it will not read DVD's. It will read CD's just fine no matter what's on them. I've tried to uninstall and reinstall the driver and find other sollutions and so far nothing has worked. Please help.
    This question was solved.
    View Solution.

    Please give us the full model number....dv6-xxxx? An optical drive has more than one laser and sometimes the CD laser is fine but the DVD laser is bad and the only way to fix that is to replace the drive. Are you still under warranty? The only other thing you can try is a dvd laser cleaner disk like this:
    http://www.radioshack.com/product/index.jsp?productId=2361964&utm_source=Google&utm_medium=PPC&utm_t...
    This would be a long shot but might work.

  • Dvd drives not reading

    Our dvd drive on our Power Mac 2x2.66 GHz Dual Core intel.The drive is an Optiarc dvd rw ad-717a: sometimes will not read inserted discs. These discs work ok when tried on our I mac. Other discs work fine. This has occurred with discs that have bee writen in the drive as well as supplied discs.Help would be appreciated.

    Not Sure what you exactly mean but if the Mac can't read the CDs it has written then there is a problem with the optical drive itself. If the CD is detected on teh computer but will not play it might be something to do with the dvd player app on your mac. Try to download VLC for you mac and see if it can read content (assuming it is a video or something). Cheers!
    -Manuel

  • SD card driver not reading

    My Sony vaio is not reading my SD card from my camera. I installed the software updates and it didn't do anything. I checked under devices and drivers and it says the software is working.. but it's not. The SD drive has worked before, so I don't understand why it stopped. Any suggestions? Thanks.

     
    Hi anasellares
    Thank you for considering Sony Community! 
    Reformatting the computer will just reinstall the Operating System back to its original factory settings. It will reload all pre-installed applications and drivers. All third-party applications you installed will be deleted. And all software issue should be resolved. You have the option to do this right away but creating a backup is a must. The links above are combination of U.S support and non-U.S. support links. To isolate the issue, kindly try these steps:
    Power Cycle - Remove the battery and all peripherals -> press and hold the power button for 5 seconds OR, if the battery is not removable, remove all peripherals-> look for a battery off button on the bottom of the laptop -> push the button for 5 seconds
    Reset BIOS. 
    The drivers and software that support your computer are on this link: VPCSE13FX 
    Take note of the card that your unit can accommodate: 
    ❑ "Memory Stick Duo"
    ❑ "Memory Stick PRO Duo"
    ❑ "Memory Stick PRO-HG Duo"
    Just in case you are decided to format the unit, please follow the steps here: System Recovery from outside of Windows. (Steps 1,2,9, skip rescue, 16).    
    For further assistance, we kindly recommend visiting our Sony Global Web site for information on contacting the Sony Support Center in your region at http://www.sony.net/SonyInfo/Support/. 
    Hope these options help. 
    Regards,
    Vincent 
    If my post answers your question, please mark it as "Accept as Solution"

  • MBP Optical Drive not reading cds or dvds + LaunchDaemons not in Library

    Late 2008 MBP, 4gb, ram 2.66ghz, Mountain Lion 10.8.4
    Hey this is my first time using this forum but I'm not computer illiterate so please don't waste my time!
    My optical (disk) drive in my Late 2008 MBP is not reading dvds or cds.
    I repaired disk permissions to no avail.
    I had read another thread on this issue saying I could opene my library to see if i could find and delete  com.WD.WDDDriveServices.plist. which I had seen had worked for others who had had a 1tb WD external drive and had had their disk drives stop working because of this. However, when I went into my library the LaunchDaemons folder which was supposed to contain this erroneous file LaunchDaemons was not even there! Is LaunchDaemons called something else on Mountain Lion or what? I went through all my plist files and could not locate com.WD.WDDDriveServices.plist. anywhere! It is my hope that if i can find and delete this file that I may be able to reboot and have a working disk drive again!
    (note)
    I could play DVDs but not CDs up until I upgraded to mountain lion 10.8.4, but after the mountian lion upgrade now even DVDs won't work.
    Can anybody help me resolve this issue with the Missing LaunchDaemons folder, or have another suggestion beyond repairing disk permissions or deleting com.WD.WDDDriveServices.plist.  to make my optical drive work
    I am hoping can resolve the main issue at hand which is my optical drive, but also any help on locating LaunchDaemons would be appreciated.
    (I know there has been a few threads on this topic, believe me I've practically read them all, for most repairing disk permissions worked, for others who had a wd 1tb external hard drive (like me) deleting com.WD.WDDDriveServices.plist. worked, but that isn't an option at this moment since i cant even find LaunchDaemons in my Library lol.
    PS.
    Please don't be a smartass and say get a new optical drive, I know my MBP is old but I think the problem is not really with the hardware but rather with this absent LaunchDaemons folder.
    Thanks in advance.

    Likely not. Your next step is a call to AppleCare or a visit to a repair center.

  • Envy dvd drive not reading media. Any ideas?

    The dvd/bluray drive is not reading any media (CD, DVD or Bluray).  Is there a fix, or is hardware related?

    I have the same condition.  Envy 17" i7 is 18 months old and very light use.  Maybe 4 hours on dvd/cd drive.  Just put a movie in and drive is stuttering, picture is a garbelling collage, but audio is mostly clear.  the last dvd, a training video that was fine 3 months ago is somewhat corrupt and the drive is doing it's stuttering intermitently.  What to do?  Is there a test disk and/or analytic software that can determine the issue?  The Drive is an HP BDDVDRW CA30P.  The driver files are up to date according to the MS on-board search tool.
    Thanks for advice!

Maybe you are looking for

  • PIX, ASA or VPN concentrator & dynamic VPN

    Hi all, I need help what to use and how to do next. What we need is to create remote VPN for many users so that every user is member of more than one group and every group is linked to predefined set of rules, for instance you can access this IPs, po

  • Spry region drop-down list problems in IE

    Can someone please help me determine the reason that IE does not display the correct item in a spry region drop-down list when first opening the site.  You can see the problem at http://www.minursemap.org/agedistnurse.html.  The initial item in the d

  • ADF and SQL Server

    I'm using Business Components on a SQL Server database. I'm able to insert and select records from the database. But while trying to either update or delete I get an error due to the fact that SQL Server does not seem to support the "For Update" clau

  • Reset pram & nvram now my imac is slow.

    Hello, I decided to reset my pram because the disk startup preference pane wont recognise my windows drive but i could boot into windows from my firmware. I read on the internet that resetting the pram might fix it. After i reset my pram my computer

  • HT1414 NO SERVICE PROBLEM IN MY IPHONE

    my iphone network is show no service (so that my iphone not support any service provider  sim)