Pavilion 23fi horizontal lines

hi, i have a HP 23inch monitor. Was working really well until I noticed blurry and horizontal lines to the left of the screen.
About 6 inches left to right. Centre and right of screen is still very clear.
Please help, how can i fix? Thank you.
This question was solved.
View Solution.

If the unit is out of warranty, it is out of warranty.
Very few electronics devices are delivered with more than a one year warranty. Some high end notebooks do have two year warranty included with purchase. That is the de facto standard in the electronics industry.
 It is unfortunate, but there is nothing that we in the support forum can do to help you with this. This is not a business unit of HP, nor are we employees. We are volunteers.
You can contact HP directly and inquire about about of warranty support for your display.
****Please click on Accept As Solution if a suggestion solves your problem. That will help another person facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

  • Pavilion dv7 horizontal lines - Display going bad?

    DV7-7025dx bought in 2012. Today, on boot, horizontal lines right from the moment I turn it on. Lines are so bad I can barely see anything. Booted into windows - lines still there. After a few minutes they cleared up. Powered down, removed battery, reset bios, rebooted. Still there. Is the display/adapter going bad?

    Hi  ,
    Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
    I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion dv7 Notebook and issues with the screen flickers and going pink and green. Here is a link to a document that will help you troubleshoot the image on screen flickers, has lines or distorted colors. Have you connected a monitor to the Notebook to check if it happens there as well? Here is a link on how to clean the fans as this could be an issue. If this does not display on the Monitor it could be a connection issue with the LCD screen or the inverter cable. Please let me know how this goes. Thanks. 

  • HP Pavilion 23fi

    Hi,
    I have 2 HP Pavilion 23fi monitors connected to my Macbook Pro (retina) and everything was working perfect. Today suddenly approx 1/5 (perhaps less) on one of the monitors became utterly strange. It seems like the effected area has a lower resolution than the rest of the monitor (1920 x 1080) in the shape of long horizontal fine black lines. -The problem came out of nowhere, as no special environment, souroundings, electric or software changes has been applied.  
    I purchased the affected monitor some 6-7monts ago, it says it is manyfactured in June 2013.
    I have tried to swop cables with the other monitor, computer output as well as tried with HDMI cable, reset the monitor in the OSD menu. But nothing helps.
    Any advice on what to do, as the currentstatus does not work for me as I am editing pictures and other high resolution required medias.
    I am located in Hong Kong
    Any suggestions and advice is welcome
    Thank you in advance

    Hello BlueOrange,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that one of your HP Pavilion 23fi Monitors is not displaying correctly. As you have stated all of the steps I would have recommended to you as already tried, it would appear to be a physical issue and I think it would be best if you contact HP Technical Support for repair options.
    I would like to thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Two HP Pavilion 23fi 23-inch dead short after end of warranty!!

    Dear HP,
    I live in Australia and it is almost impossible to find the right information or even support from your local web site.
    I have two HP Pavilion 23fi 23-inch Diagonal IPS LED Backlit Monitor (C7T77A2) here on my desk and a few days apart BOTH displays died short after the warranty expired.
    My local shop where I bought the displays is not able to help me.
    Both displays show the same behavior, the display is decolored on the left side and only every second line is visible.
    It is annoying and very disappointing, I bought HP because I am very happy with my Z200 workstation, but the displays are not worth the name HP.
    I would be very pleased if some of your support personal could contact me to discuss the matter.
    Thank you.
    Chris

    Hi @chrisgeo 
    I have sent you a private message. If you are not sure how to check your private messages then this post has instructions that will guide you through the process.
    Thanks for visiting the HP Support Forum
    I work for HP. However I speak only for myself, not for HP nor anyone else

  • Horizontal Line on Laptop screen

    Horizontal line appear on my laptop screen
    HP Pavilion dv6 1355 dx
    Intel processor
    Windows 7
    How can I rid these lines

    mgh1936 wrote:
    thanks did both no luck. I understand the cable can become worn from openning and closing the screen?
    That is a possibility but it's more likely that the problem is the LCD panel.

  • I'm using Win 7 and Firefox Screen fills with horizontal lines,

    Had no problems with previous versions of FF. I updated with FFv4 several weeks ago and have my browser screen continually being filled with horizontal lines. I can remove some of them by using the vertical scroll bar but they return when the display contains a lot of text. Sometimes when display is pictures or videos I am spared. This never occurred before FFv4. If a screen contains a few pictures and is engulfed in lines I can scroll it with my mouse and some pictures reappear but there are still lines over the rest of the display. I use an antivirus (BitDefender) and scan regularly. I also use Windows Defender for protection which was recommended by my AV manufacturer.
    Sometimes of late I have noticed that when the display is no maximized the problem doesn't happen as often. I use a 19" monitor.
    So far tonight while writing this note I haven't experienced a problem but the window is not set to max.

    I had this problem as well. For me, the solution was to disable the two latest add-ons I had installed: Cooliris and HP Detect (I have a Pavilion dm1z). The issue with horizontal lines went away after restarting the browser.

  • What is the white horizontal line and red vertical line on my brand new ipad mini?

    Bought a brand new ipad mini 2 for my sons Christmas, took it out the box and it was during the set up process, ie entering his iTunes and icloud account, a white horizontal line and a red vertical line appeared on the screen and is there all the time now.  Have tried switching off and on and resetting, but it is still there.  Any ideas??

    Hi Tolmivooz,
    So the lines didn't appear until you were into the setup?
    Does the orientation of the lines change when you rotate the screen?
    Thanks for trying the restart and reset. Please see if a restore helps.
    Get help with the screen on your iPhone, iPad, or iPod touch - Apple Support
    If you see lines, missing sections, discoloration, or poor image quality
    Try to restart your device. If you can't restart, reset your device.
    If restarting or resetting doesn’t fix the issue, restore your device.
    If you still see the issue after you restore, contact Apple Support.
    Best,
    Nubz

  • Subtle horizontal lines in HDV footage exported from iMovie 06

    Hello!
    I just bought a Cannon HV-30, which I'll be using to film an instructional DVD. I'm hoping to use iMovie 06 to edit, and was planning on using iDVD until I realized how tricky DVD authoring is, if you want to sell thousands of copies of your DVD and have any hope of them playing on people's DVD players.
    At any rate, I still want to be able to burn drafts of my film using iDVD. I tried doing this yesterday, but my footage was distorted both in the iDVD preview, and in the DVD I burned. The distortion looked different depending on how big the preview window was. When it was fairly small, I'd get this wavy, ripply effect whenever the camera panned. When I maximized the window, and also in the DVD (which was full-screen), I'd get a more subtle jagged edge to vertical lines--every-other-line on the monitor would stick out, like a fine-toothed comb. When there wasn't movement in the film, things looked pretty good, except for a bit of horizontal-lines visible.
    I made my first DVD by using the Export... iDVD function. After I read on this forum that this doesn't produce the best quality, I tried importing the iMovie project into iDVD, but I got similar results.
    Any ideas?
    Thanks a ton,
    Rob

    DVDs look best on the system they were designed for: CRT TV sets with 640x480 square pixels NTSC (768x576 square pixels PAL)
    When 'blownup' in size on large computer monitors or large HD TV sets the image quality will be less than optimum - that's why the new Blu-ray were created.
    There are steps you can take when shooting your video that will help. Remember that mpg compression works on the differences between frames and anything that creates unnecessary difference between frames will cause reduced mpg compressed quality. So: use a tripod to avoid camera shake; make all your pans slow and smooth; and shoot with plenty of light to avoid the 'grain' caused by electronic noise in low light situations.

  • TV-out (Mini-VGA to S-Video) Horizontal Lines problem

    Imac Intel Core Duo running 10.5.8 2ghz
    i want to watch movie files on my tv. i bought a mini vga-to-video adapter from Apple. However, whenever i hook it up to my Tv, i get these rolling horizontal lines on the TV screen. i have tried every resolution combination, unplugged all extraneous plugs from both the Tv and computer. All to no avail.
    this *****- i used to watch movies just fine on my eMac. ..if anyone has any ideas on why i get these ghost lines they will be much appreciated. thanks!

    The manual doesn't state that this will work. I recommend you contact MSI and ask.  >>How to contact MSI.<<

  • Black horizontal lines on start up and doesn't load GUI

    So here it goes
    My Late '11 15inch Macbook Pro went bonanas today. When it starts up there all these black horizontal lines running across the screen jiggering jabbering everywhere and I see three apple logos (due to GPU glitch I am guessing) after loading everything goes white and my laptop heats up and battery dies within like half an hour. I was bummed but then like after restarting a bunch of times and recharging my laptop it starting up normal again! I was super happy, but then it experienced the same crash next time the battery died. So, this has been going on and off; I don't know whats going on but it seems fixable I just want to know how.

    Probably by replacing the logic board.  I suggest that you take the MBP to an Apple store genius bar for a FREE evaluation .  Then you will be in a position to make an informed decision.
    Ciao.

  • How to insert horizontal lines in alv report?

    hi,
        i have to insert horizontal lines in alv report.( RM07MLBB )
            actually my requirement is:
                               basis list = RM07MLBB.
    first secondary list = another report is called here ( RM07DOCS )
                      i want to insert horizontal lines in the first secondary list, when i execute individually RM07DOCS , i can get horizontal lines, but when i dounle click in the basic list --> in the first secondary list , i am not getting the horizontal lnes.
    functional modules used are REUSE_ALV_HIERSEQ_LIST_DISPLAY & REUSE_ALV_GRID_DISPLAY.
        here in this program,
                        is_layout = alv_layout.
    hence i tried to give     
                  alv_layout-no_hline = ' '. 
    but not effecting.
              can some one please tell me , how to insert lines in the alv report.
    thanks in advance,
    Dastagir.

    hello,
         so i cannot insert horizontal lines in the first secondary list according to my sorting condition, i.e., in a single block there should be :
           if same delivery challan number is repeating they should come in the same block,
    for the corresponding delivery challen number, if have po number, is repeating , they also should come in the same block.
                       in this way i have to seperate the blocks containing EXNUM , EBELN CONDITIONED.

  • Not printing properly with horizontal lines

    HP Officejet Pro 8500A
    Not printing properly (Faded colors) with horizontal lines, printing excess pages with odd scripts.  I suspect printer heads.
    All color cartidges are full.  
    Printing can be direct from computer or by scanning from the printer.  Either way, it has the same issues.

    Hello,
    Please click HERE to access the steps that should resolve the issue .
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Why do I have white horizontal lines on my Macbook Pro Retina?

    When I am using my 15" Macbook Pro, there are often white horizontal lines that run across the screen. It usually happens when I am watching a video, typing, scrolling or just sitting on the desktop. There are days where the screen is perfect and there are no problems; there are also days where it happens so frequently that some videos becomes unwatchable due to the distracting lines flickering and flashing on the screen. They don't stay all the time but I'd love to know what the problem actually is. Thank you for reading, and please help me out.

    Hi there JohnRendleman,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    -Griff W.

  • Horizontal lines for each rows in the rtf template

    Hi,
    I am a newbie for XML Publisher. I just created a XML Publisher report for Vendor invoices. But for each invoice/invoice line rows I am getting a horizontal line which separates each row. But I just wanted the vertical line to separate the columns and not for the rows.
    For example, the output looks like
    Invoice number | Item Description| Quantity|
    123__________| xyz__________|_____30 |
    _____________| xyz__________|_____30 |
    _____________| xyz__________|_____30 |
    345__________| xyz__________|_____30 |
    I am getting the report some this like this. But I need the report like below,
    Invoice number | Item Description| Quantity|
    123__________| xyz__________|_____30 |
    _____________| xyz__________|_____30 |
    _____________| xyz__________|_____30 |
    345__________| xyz__________|_____30 |
    (Please consider the ____ as space)
    Please suggest me some solution. tons of thanks in advance.

    Hi Vetsrini,
    Thanks for your prompt reply. I hope I had put the tag that you had mentioned. But anyhow I had sent your the template and the sample XML file to see the output.
    I have one more question also I want a curvey edge for the table and no tthe sharp edge like this _|. If possible please suggest for this also.
    Looking forward for your reply.
    Hope your mail id is fusion{DoT}object[AT]gmail[dOt]com

  • How to draw horizontal line in smartform after end of the all line items

    Hi Friends,
    I am working on the smartform. I have created TABLE node in Main window.
    i want to draw a horizontal line after end of the main window table node. i mean after printing all the line items of the table, I need to print one horizontal line.
    Could you please help me how to resolve this issue.
    FYI: I tried with the below two options. But no use.
    1. desinged footer area in the table node of the main window.
    2. tried with uline and system symbols.
    please correct me if i am wrong. please explain in detail how to draw horizontal line after end of the main window table.
    this is very urgent.
    Thanks in advance
    Regards
    Raghu

    Hello Valter Oliveira,
    Thanks for your answer. But I need some more detail about blank line text. i.e thrid point.
    Could you please tell me how to insert blank line text.
    1 - in your table, create a line type with only one column, with the same width of the table
    2 - in table painter, create a line under the line type
    3 - insert a blank line text in the footer section with the line type you have created.

Maybe you are looking for

  • P55-GD65 takes long time in BIOS before booting

    Did a search on "long boot" but nothing relevant. Sorry if this has been already covered. First MSI board after two Giga-bytes: P55-GD65 Core i5-650 2x Corsair XMS3 DDR3 (DDR1333), total 4GB ATA133 HDD SATA DVD-RW MSI R4550 graphics card Windows XP S

  • Use Faces Managed Bean in javaScript

    Thanks in Advance Scenario: I have got a faces manged bean that constucts a string array .On my page i have got select one list box .Based on my selection ,message to be displayed at the bottom of the page or a pop up window .This string array corres

  • IPhoto crashing on launch every time

    Hi there. I just restored my entire laptop from a full backup which ought to have brought everything back exactly as it was before I had it repaired (and the hard drive was replaced). Everything was perfectly fine except for iPhoto, which ever since

  • Dwm special characters with tty font?

    Currently, I have dwm configured like so: http://i.imgur.com/JsTurIO.png But as you can see, in the upper left corner, my tag names aren't displaying properly, neither is the title of the directory I'm in (†††). I've tried the dwm-pango patch, but th

  • Standard info

    is there any website where I can find info on recommended look and feel standards for developing webpages? Thanks.