Pavilion 751n audio problem

hi all
im having some audio problems with my pavilion 751n PC. it won't play music or sounds. and when i try to play music it says that theres no deice. also when I go to device manager C-media AC97 Audio device its highlighted in yellow and under device status it says "this device cannot start." I've have fully updated my computer and i tried re-installing the device but nothing works. could someody help me please!!!!!!?

The issue seems to be due corrupt audio drivers.
Try reinstalling the drivers using Application Recovery.You can find the instructions in the website below:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&docname=bph07142
You can also try installing the AC 97 drivers from the following link:
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=23&Level=4&Conn=3&DownT...
Hope it resolves the issue

Similar Messages

Pavilion dv8000 audio problem

Hi everybody,
I did a clean install of windows 7 on my HP Pavilion dv8000 just last night, most everything is working fine except one thing, my audio.
I successfuly installed the drivers but in the device manager I get a message "This device cannot start. (Code 10)" wherther or not this is a problem with windows 7, I'm not sure, however the problem started when I installed it any suggestions on fixing this would be appreciated

My problem with Win7 drivers on a dv8000 unit with AC97 audio is consistent with what has been aired here (audio, mass storage, modem). The audio was most egregious. I followed a number of solutions over (3) days which eventually led me me to sp35558. But it did not install without tweaking. I followed this advice, and then tweaked it. http://h30434.www3.hp.com/t5/Windows-7-Beta-and-test/NEED-HELP-Windows-7-sound-drivers-for-dv8310us/...
After that failed, I did this routine:
1) right-click the question marked (unknown audio) device and choose update driver software.
2) Click "Browse my computer for driver software."
3) Choose "Let me pick from a list of drivers on my computer"
4) Page down to and choose "Sound Video and Game controllers"
5) Choose (Click) the "Have Disk" button on that dialogue box.
6) browse to the folder with the CP6308Ba.inf file.
7) Choose the inf from the browser, "open" it and press OK.
It will warn you that the driver is not signed in the process. Just OK it.
It installed the drivers after that as "Conexant AC Link Audio."
I love my audio again.

Pavilion 743g Audio Problem.

I just did a clean install with SP3. Everything is fine but when I go to install the Realtek AC'97 drivers, the computer restarts in the middle of installing. I've tried many alternative AC'97 drivers. Anyone have the same problem? I don't know if the driver hosted for the 743g is wrong or what but it won't install. Thanks.

Hello,
I'm having the same problem. Formatted and installed a clean copy of XP with SP3...twice. After the first install, I installed the "Realtek AC'97 Audio Driver Update" that's provided on the HP support site. That didn't work, the computer would restart (a hard restart) near the end of the installation of the software, while the installer was copying an .exe. That happened over and over again. The only time it wouldn't restart was when I either (A) installed it in safe mode (but then the computer would just keep restarting while windows was loading) or (B) when I had the audio stuff disabled via the BIOS, which, of course, doesn't solve the problem.
Then I reformatted and reinstalled XP just in case something had gone wrong with the install. This time I tried using the drivers provided by Realtek. Same exact problem, same exact .exe.
The sound worked perfectly while this PC was "stock." Then 45 minutes later, after formatting and installing XP and then the drivers, this problem started occuring.
Is there any way to obtain any sort of recovery software or something to get it back to "stock" condition (this computer was given to me for free, I had intended to use it as a fileserver) or obtain JUST the drivers, without all of the management software (which seems to be causing the problem...I think)?
I posted in this thread rather than making a new one since this one hasn't been resolved.
Thanks.
Message Edited by Jeffwa on 08-21-2009 03:45 PM
Message Edited by Jeffwa on 08-21-2009 03:56 PM

Pavilion d4990y audio problems

Seems to be a wide-spread problem with HP audio when you do a web search...
Windows Vista x86 at SP2.
Will not play sounds. Using Volume Panel, it plays the speaker identities ("Left channel" & "Right channel") but that's the only noise I can get to come out of the speakers. Have deleted the hardware and allowed Vista to reinstall hardware and drivers. Have updated drivers and have restored original drivers. Not a clue. No error messages.
Am preparing to move to Windows 7, and any suggestions that will restore audio BEFORE upgrading would be appreciated.

Hi erenmus. If the sounds works in Windows and iTunes it seems like the sound is functioning properly.
If certain games aren't producing sound, it would be an issue specific to each game. NBA 2k14 seems to have a patch released recently. PES 2014 seems to have a patch or 2 available as well.
Also check the sound settings from within the game itself.
Have you tried the game with HDMI out, or just on the notebook screen? Are you using headphones or notebook speakers?
Also make sure your audio drivers are updated here:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-112411-1&cc=us&dlc=en&lc=en...
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Audio problem with Pavilion dv5-1240EW

Hi all!!
I'm here to find help with my audio problem.
My laptop is HP Pavilion dv5-1240EW and i had download the audio form the HP side some time ago and also get new Nvidia drivers. My problem is that i can use the 5.1 sound on my Logitech X-530 because i can set in on my audio setting. I insert the screen (sorry but i have polish version of windows 7)
As you can see i can only one option but i should have also the other like: mono, 2.1 , and 5.1. It's funny but i have the option 5.1 but it disappear. And it looks like this drivers give me only 2 option spekers and headphones and nothing more.... I don't know what to do if the drivers form the original side "crush" my audio setting.The funny thing is that the subufer is working and 4 of 5 speakers work but you know is only right and left the middle is not work. I try to reinstall drivers but it doesn't help i can't find solution to this problem and i lost many hair so if you know how to fix it It was a great relieve to me.

I get here the screen i don't know how my message get over 50,000 signs O.o. Here it is:
1) http://imageshack.us/photo/my-images/854/idt.png/
2) http://imageshack.us/photo/my-images/707/idt.png/
OMG two little pictures and "Message cannot exceed 50,000 characters. "

HP Pavilion Entertainment PC, model dv2690en; mic audio problem

I am facing problem of mic audio not working due to some internal drive problem. I tried to install the latest drive. Tried to restore the drive programme and could not resolve the problem. Please advise me what I need to do to resolve the mic audio problem.

You can order recovery media here
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If HP no longer has Recovery Media for your model, order them here
http://www.computersurgeons.com/Default.aspx

Audio problem in Encore 2.0

Hello,
I have a problem with my sound card (Conexant AC-97) and Adobe Encore DVD 2.0.
I use Encore from the version 1.0, so I know all the application features, and the version 1.5 works fine on my PC. I've upgraded to the 2.0 version, but with this version, when I launch the preview of the timeline, I hear only a little bit of the audio trace followed by no sound.
I read that Encore 2.0 recognizes an ASIO card only if a DirectSound driver is installed with it. Most ASIO sound cards ship with both an ASIO and a DirectSound driver which are installed by default. Encore DVD recognizes any audio card that has a DirectSound driver (as mentioned in this KB http://www.adobe.com/support/techdocs/332017.html), and my card is recognized, but I think this audio card is not so much recent and it doesn't work with Encore 2.0.
These are my PC data:
HP Pavilion zd7038
Audio Card: Conexant AC-97
Video Card: nVidia GeForce 5700
RAM: 1 Gb
Any suggestion is appreciated.
Best regards
Rolando Ramieri

Hi Neil,
thank you for the response.
I know that Conexant AC-97 isn't a soundcard :-)
I downloaded the last driver for the card from the HP support, but this is an old driver (04/2002) and it makes no difference :-(
The strange thing is the soundcard works fine with other applications (such as Adobe Premiere Pro 2.0), and I have the problem only with Encore DVD 2.0.
I can try to disable Windows Sounds, but I don't think that is the problem.
Can I make some configuration to Encore DVD to support my soundcard?
Best regards
Rolando

CP61-420US audio problem

Just bought this laptop and have audio problems. Volume is so low that I have to have it at 50% just to hear system sounds, 100% to listen to music or the Windows 7 videos. Sound is very tinny and crackly. Called HP support, and after first being told that my 3 day old laptop is out of warranty, I was put on hold. They came back and told me this is a known issue with this model, they don't have a fix, and they will email when they know more! Anyone else having this issue?
My old HP had Altec Lansing speakers and they were great! Unfortunately, it also had the known hardware issue bad motherboard, which died 2 weeks after the extended warranty, and they wouldn't fix it. So, I'm very leery about how HP stands behind "known hardware issues." Guess HP doesn't believe in recalls!

Better ask for refund.
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

AUDIO PROBLEM WHILE USING OR ALONG WITH WEBCAM

Hi friends,
SUBJECT : AUDIO PROBLEM WHILE USING OR ALONG WITH WEBCAM
I'm not getting any sound while using web-cam.
I tried recording my voice , and played.. i can see my video but audio
Do we have any settings where i need to cross-check to make sure that everything being turned-on ?
My laptop details:-
HP Pavilion dv6 laptop
Operating system Installed - Windows 7
Can someone help me with this?
Thanks
kiran

Hi,
not sure if coincidence or the same question, but the same question got asked internally. The seeded option is required to get the OJSP filter installed. Here's the internal response
ADF View integration with MDS not configured
In web.xml, you need to have mds-ojsp intg enabled to load jspx base + customizations from MDS. In your web project in Jdev, go to ADFv project properties and select “Seeded customization” property. It would enable mds-jsp engine configuration in web.xml. If you want to use user personalization feature at runtime, you would need to select “User customization” property as well which would enable ADFv change persistence config in web.xml.
Warning: Some of the metadata under ... is packaged as part of both WAR and MAR. This metadata cannot be accessed from WAR using MDS.
For these two packages, you are including the files in both WAR & MAR. This warning conveys that since these base files are being put in MAR, at runtime they would be read from mds repository & not from WAR.
Frank

Audio Problem since upgrading to Mountain Lion

Has anyone encountered audio problems with their iMac? I just upgraded to Mountain Lion on my i7 27" with 16GB of Ram and found that the Audio starts to get distorted and eventually cuts out after about an hour! It starts cutting in and out when I move the mouse and eventually there will be no sound at all!
Sometimes it can take over an hour of steady use, my last time was watching a movie on Netflix. I initially noticed this using a USB DAC Headphone Amp.
I never had any Audio problems before, my machine is over 1 year old.
I enjoy watching movies in iTunes and DVDs, but this is making it difficult! A full restart usually fixes the problem for a time but it will eventually come back
I'm seriously thinking of going back to Lion for the time being and seeing if it is a Hardware problem.

i don't know if mine is the same issue, but i had no sound through any of my applications after upgrading to mountain lion. here is what i had to do to fix it:
-- applications > utilities > audio midi setup > UNmute all options under "built-in output" (they were mysteriously muted)
Also, I noticed that the options for "use this device for sound output" and "play alerts & sound effects through this device" were no longer assigned to my Built-in Output device. They were assigned to some other random sound driver. To fix, i right-clicked on Built-in Output and reassigned those items to my built in speakers. All fixed now!
very weird problem, though.

Can Apple fix the 12 bit audio problem once and for all?

I have had persistent audio problems from I Life V3 all the way up to I Life 06. Sometimes it is synch issues. Sometimes it is audio dropping out. I have been through the various forums and applied the various remedies with some successs, some failure. The basic problem is that I have an extensive quantity of Mini DV tapes dating back to 1997, most recorded with 12 bit sound (prior to 2002). Apple's basic stance has been, you must use 16 bit sound or I Movie and/or I DVD won't work and . And proposes awkward workarounds. Basically placing the onus on it's own consumers. Why can't 12 bit sound support be included in I DVD 06 and these persistent audio issues put to rest once and for all? Is there some overwhelming technical reason why it cannot be done?

I don't know about overwhelming, but the DVD specification (which was not developed by Apple) calls for the audio to be sampled at 16-bit/48KHz (I think you might also be able to use 96KHz as well). This is what the software expects. If you choose to use another sample rate then the software may or may not be able to "fix" it in post. The real problem is that many camcorder manufactures set the audio to 12-bit by default.
Mike

HOW TO FIX NO AUDIO PROBLEM IN FLASH (4 SOLUTIONS)

This solution is for WINDOWS ONLY!!! Unfortunately I believe
it is a bug in flash itself as I have read more than one instance
of this same no audio problem occuring on MAC'S and LINUX based
systems as well. IF YOU KNOW OF SOLUTIONS TO THE MAC OR LINUX BASED
PROBLEMS, PLEASE POST THEM IN THIS THREAD.
Description of the problem: Video sites such as YouTube,
VideoSift, Break, Google Videos, Yahoo, and a plethora of others do
not stream embedded audio. Viewing a YouTube video, for example, on
VideoSift.com results in the video playing back with no audio.
However, by going directly to YouTube and playing back the same
video, it appears to work.
THERE ARE SEVERAL POSSIBLE SOLUTIONS.
Problem: You may be missing your WAVEMAPPER driver.
Cause: Wavemapper driver was removed during installation or
updating of the Flash Player. It might not necessarily be Flash
that removes it but apparently something does.
Solution #1: Google "Flash No Audio WAVEMAPPER" for
directions, its been covered a bunch, but basically requires
running REGEDIT and readding the WAVEMAPPER key to the appropriate
location and value in the registry. Its not as difficult as it
sounds.
http://weyland.be/wrdprss/index.php/2006/08/22/no-sound-in-macromedia-flash-player-9/
if your wavemapper key is installed correctly...
Possible Cause: Corrupted or damaged flash content preventing
audio streaming from working correctly.
Soltuion #2: Run CC Cleaner and delete only cached Flash
content. It is a free program, again just google "download CC
Cleaner". This particular solution worked for me.
If CC Cleaner also does not work, the description of your
problem may differ slightly. In my case on several computers, one
day it worked, the next day it didnt. If it never worked, this
would be a logical solution for you. One variation of this that I
have found is to create a new Windows User Account and log into it.
The reason the CC Cleaner method may work better is that the User
Accounts have their own separate cache folders so a corrupted cache
preventing audio playback on one profile will not be available on
the other User Account to cause the same problem. I wont explain
how to do this as the CC Cleaner will work better but if you are
curious, yet again google "create new windows user accounts". I
have also seen this method work on one of my affected computers but
it did not fix the issue on the account I was having problems with.
http://www.ccleaner.com Install
and run it, use it only to remove Flash under the Applications Tab,
Multimedia, Adobe Flash Player. Check it and uncheck everything
else, then hit Analyze then Run Cleaner.
Possible Cause: Missing Codec
Solution #2: Download and install the K-Lite Codec pack.
Again, google it. A CODEC stands for COmpressor DECompressor and is
a way to make audio and video files small enough to be transferred
on the internet. There are a lot of different codecs and if you
want to play back a video that was compressed using a particular
codec, you will need that same corresponding codec to decompress
your media source and view its content. Basically if you dont have
a codec, you cant observe the content of the media. If you have a
VCR and want to play back a DVD, you are out of luck unless you get
a DVD Player. DivX and XVid Codecs are some of the very popular
codecs used on the net, but to get those, I still suggest getting
the K-Lite Codec Pack.
http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm
Solution #4: Go back to Flash 7. If it aint broke dont fix
it. This Final alternative is only to be used as a last resort.
You'll have to get rid of Flash 9 and go back to Flash 7. The
really tricky part here is that you have to prevent Flash from auto
updating itself. If you install Flash 7, and hit up YouTube, you'll
immediately get Flash 9+ installed again with the same problems. So
AFTER you uninstall Flash 9 (use Macromedias / Adobes uninstaller,
yet again go google it) make a new text file and name it MMS.CFG,
in the file put this one line "AutoUpdateDisable=1" (without the
quotes) and put it in BOTH your c:\windows\system32 AND
c:\windows\system32\Macromed\Flash folders. This will prevent flash
from Auto Updating to 9+, then have to find some place to download
the old flash 7 installer. I found one here.
http://www.intercomm.com/downloads/Flash7.
Only problem is that most sites will try to make you install Flash
9 and Flash 7 does not work on all sites, but it does on some like
YouTube. DO NOT UPDATE TO FLASH 9+ IF YOU USE THIS METHOD.
You will probably want to IMMEDIATELY go to
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.htm l
after installing Flash 7 and UNCHECK the update feature
I've tried to write this quick little guide at 3AM so Im not
going to take more time to research other ways to fix this problem.
If you have other solutions, such as for MAC and LINUX, or feel
like adding on to something else that I've written here (links
would be useful to the downloads I suggested) or correcting any
mistakes I probably have made, please say so.
One of these solutions is bound to help you. Theres multiple
causes for this no audio problem so there is obviously multiple
fixes.

http://www.omahapokernews.org
http://www.holdempokernews.org
http://www.7cardstudplay.net
http://www.5cardstudplay.net
http://www.holdemspot.org
http://www.texasholdemstate.net
http://www.texasholdemstate.com
http://www.pokerbonuslist.net
http://www.pokerdownloadz.org
http://www.signuppoker.net
http://www.tournamentpokerz.com
http://www.pokercalculatorz.com
http://www.omahaodds.org
http://www.omahaouts.org
http://www.texasholdemrulesonline.net
http://www.onlineholdemtips.com
http://www.pokerhilo.net
http://www.poker-hilo.com
http://www.hilopokers.com
http://www.nolimit-holdempoker.net
http://www.texasholdemlimits.org
http://www.texasholdemlimits.net
http://www.onlinepokerlimits.org
http://www.onlinepokerlimits.net
http://www.onlinepokerlimits.com
http://www.texasholdemlimits.com
http://www.7cardplayer.net
http://www.5cardplayer.net
http://www.omahaacademy.org
http://www.omahapokerrooms.net
http://www.onlinepokerroomstop.net
http://www.playpoker-toppokerrooms.com
http://www.texasholdemz.com
http://www.playpokeronline-casinos.com
http://www.texasholdem-vip.com
http://www.gamble-poker-holdem.com
http://www.playpoker-holdem.com
http://www.onlinetexasholdem-poker.com
http://www.texasholdempokeracademy.com
http://www.vip-texasholdem.com
http://www.playfree-poker-online.com
http://www.texasholdem-pokerrooms.org
http://www.toppokerrooms.ws
http://www.toppokercasino.ws
http://www.onlinepokercasino.ws
http://www.playpoker-online.ws
http://www.online-texasholdem.ws
http://www.play-texas-holdem.ws
http://www.internet-texas-holdem-poker.ws
http://www.poker-player.ws
http://www.luckyschool.com

VGA problem with FiFA 2003 and Audio Problem with NHL2003

i use onboard VGA
800 x600for both games
with no problem
but for Fifa 2003
the screen looks so dark...
all players look like a black people(all black color hair
and black face))
some audio problem with NHL 2003...

Have you tried the following?
Adjust monitor settings? i.e. contrast/brightness
Video settings within the game? Some have gamma or brightness settings.
Gamma correction in "Display Properties"?
for starters anyway......

Audio Problems in Adobe Presenter: Help Needed Urgently!!

I am using trial versions of Adobe Presenter 7 and Adobe Connect 8.
I created a presentation in in Powerpoint 2002 and published through Adobe Presenter to Adobe Connect Pro. This presentation has voice over recorded through the Adobe Presenter "record audio" option.
In Adobe Connect Pro, I created a meeting and shared the above mentioned presentation through the "Share Document" option in Connect Pro.
Now, when I play the presentation in this Adobe Connect Meeting, I am not getting any audio that was recorded in Adobe Presenter. Whereas if I play the published presentation directly it plays the recorded audio.
Can anyone help me on this?
1. Are there any settings to be done in Powerpoint or Adobe Presenter or Connect pro?
2. Is it the problem of Trial Account or something like that?
Please let me know the solution. Need to work on this ASAP!!!
Thanks in Advance,
Yogini

This is a weird one. If you created a prezo with audio and published it to AC (Adobe Connect) and everything worked fine on your desktop then it should work fine in AC i.e. there are no other settings required on AC's side, it should just play.
As I am typing this I thought of similar audio problems that we have experienced in the past. A big one would be where another user created a PPT on their laptops and handed it to us. When testing the audio did not work. Reason being is that not all the files were coppied over BUT I must accept that this is not your problem as it definately worked on your PC before you published it to AC.
Wait there is one setting in the publish settings. In the output options tick "Upload source presentation with assests", then tick audio.
I cannot think of anything else. There is a man called Heyward Drummond on the Adobe Connect General forum, who is a real master at answering queries like this. Why not post your query there and see if he comes up with an answer?

Audio Problems when burning

I have tried making disc image, burning disc and the audio will pause for second several times in the play back. It does not do it when playing back in iDVD.
The slide show was started in iPhoto and sent to iDVD. I have started over several times and still same issue. Makes a bad impression and is really not useable for presentation.
I have 30 gigs free space, changed settings to Professional encoding and still same issue. I have no open apps, changed all energy settings and screen saver to never.
Any ideas, I am fresh out, never had this problem with previous version.
Frustrated

Andy,
This question is really in the wrong place - this is the iDVD '08 forum and not the iDVD 5 forum.
From the description of your problem using Toast, it sounds like you didn't actually export a DV video movie out of iMovie.
Export a DV video movie out of iMovie (it will run 13 GB per hour) and play it back with the QuickTime Player to see if the audio settings you made are really there. If this movie plays OK, you can bring IT into iDVD or Toast for turning it into a DVD.
If the DV video movie you created STILL has audio problems in the QuickTime Player, ask you question about THAT issue in the correct iMovie forum.
F Shippey

Pavilion 751n audio problem

Similar Messages

Maybe you are looking for