Pavilion 8080 wireless not working. Cant find router but my laptop and mobile can. Think a hardware

issue or possibly a wrong driver. Can anyone point me in the right direction? I can't use ethernet as the router and PC are not close enough. Thanks

Hi,
if you cannot  findt your router by your pc and mobile then you have issue with your router,
try to staind near by to your router and see you can find your router in your phone if you able to find your router wifi singnals near by then
use these steps
for Wireless Issue
try these steps to check internet connectivity of your laptop, desktop or phone
go to RUN type cmd
a black window will pop up
type there ping www.google.com -t     (ping space www.google.com space -t)
if you can ping the google then you are connected to internet if its not pinging to google then chk your router connectivity
Try these steps to check connctivity with router
go to RUN type cmd
black pop window will open
type there ipconfig /all
there you will get an IP address assigned to your wifi network adaptor
see the picture
You have to ping your gateway it could be 192.168.0.1 or 192.168.1.1 or something etc.
go to RUN tye cmd   type there  ping 192.168.xxx.xxx -t ( ping space 192.168.xxx.xxx space -t)
as you can see mine is 172.90.91.1 and i am pinging it.
if you are getting pings  with time=1 ms then you are getting good strength
or your ping time is between 1 ot 99 then its ok if its 100 or above then you will get problem surfing internet.
if need any help ask it..
if you are not getting your router wifi signals while standing near by to your router then porblem could be your router, may be wireless is disabled or something else,
try to reconfigure your router.
Hope this helps!
**Clicking on the Kudos! white star is a nice way to say thank you on any post that helped you or resolved the problem.**
**Selecting "Accept as Solution" for a reply that solves your issue helps others who are searching the web for an answer**
**Clicking on the Kudos! white star is a nice way to say thank you on any post that helped you or resolved the problem.**
**Selecting "Accept as Solution" for a reply that solves your issue helps others who are searching the web for an answer**

Similar Messages

  • Hi, Just installed Flash Player 10.1.102.64 for PowerPC G4-Not working/cant find it?

    Hi, I've just installed Flash Player 10.1.102.64 for my PowerPC G4. It told me I had installed it yet I cant find it in Applications. I have read other threads and have dragged 10_1r102_64_ub_mac from folder on desk top into Library/plugins. Not sure if I was right to do that? - Im missing something for sure - would love some help please.

    Hi Cija, pull it back out & mount the DMG & use the Installer, but first uninstall any previous version...
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/865/cpsid_86551.html#prob1=uninst,os=m10.6,
    Download this if you haven't...
    http://fpdownload.macromedia.com/get/flashplayer/installers/archive/fp10.1.102.6 4_and_9.0.289.0archive.zip
    Once downloaded if it doesn't unzip automatically the double click on that file.
    Look for the fp10.1.102.64_and_9.0.289.0archive folder, open it, look for the Flash Player 10.1.102.64 folder & open and look for 101r10264 folder & open it, double click on the flashplayer101r102_64_ubmac.dmg file, choose the Install Adobe Flash Player file to install... they don't make it easy!
    Or I put up the smaller ones here...
    http://dl.dropbox.com/u/450421/flashplayer10_1r82_76_ub_mac%20copy.dmg.zip
    Stand alone player...
    http://dl.dropbox.com/u/450421/LastFlashPPC.zip
    Or free 3rd party...
    http://www.wimpyplayer.com/products/wimpy_standalone_flv_player.html

  • I have webcam and screen names not working on certain sites but OK on Explorer what can it be on Firefox.All worked up till Decembeber 2011 ...Thanks

    Question
    I have webcam not working and screen names not remembered on certain sites but OK on Internet Explorer.
    What can it be on Firefox?
    It's like cookies are turned off or something blocking.
    Even banking online is affected.
    All worked up until December 2011 ...Thanks
    Don
    [email protected]

    Okay- this is getting more fun-- I just system restored to a
    month ago because my computer froze up 5 times withing 15 minutes
    earlier today. Then I uninstalled and reinstalled Firefox because I
    noticed it was listed twice in my add and remove programs area. Now
    I go to youtube to see if by some miracle the beta page is
    working-- well not only did it not work, but now, even if I disable
    Norton, it STILL doesn't work, where as before that did make the
    videos show up. I'd really appreciate some help...

  • L got iphone 5 bluetooth is not working cant find my other iphone 4s

    l cant believe l cant send any music any pictures or files with my iphone 5 to my other devices....who works is in iphone they have to answer it or find the problem

    What do l have to do then? what is thats program called ?  Thats not good for apple company really you pay alot of money but l cant use things.. Even cheaper phones works perfect with bluetooth I cant even connect to wireless with iphone 5 do l need an other program ? this is funny really l wish l didnt buy

  • My mouse cursor is not working in the windows, but on tabs and commands it still is

    My mouse is not active when I am in the windows in firefox. I can still click and activate options on the toolbar, but cannot activate within a tab or window. I have to use the tab option on my keyboard to move through the window and press enter to submit.
    == This happened ==
    Every time Firefox opened
    == today ==
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.3) Gecko/20100401 NET_mmhpset ( .NET CLR 3.5.30729)

    Try hitting the '''F7''' key to turn off Caret browsing.
    http://kb.mozillazine.org/Accessibility.browsewithcaret
    Your UserAgent string in Firefox is messed up by another program that you installed. NET_mmhpset was added by some piece of Comcast software.
    [http://en.wikipedia.org/wiki/User_Agent]
    type '''about:config''' in the URL bar and hit Enter
    ''If you see the warning, you can confirm that you want to access that page.''
    Filter = '''general.useragent.extra.firefox'''
    Right-click that preference and select '''Reset'''
    Then restart Firefox

  • I cant find photo booth anywhere where and how can i get it back?

    i looked in finder and spotlight and NOTHING

    See:
    *https://support.mozilla.com/kb/Restore+the+default+Smart+Bookmarks+Folders

  • My iPhone 3GS will not work in speakerphone mode but plays music and video sound just fine,also if I touch the speaker button for voicemail there is no volume increase it does have the latest iOS updates

    Anybody else having this issue,seems to have started after the update to iOS 6.0 thought iOS 6.0.1 had a fix for it but nada

    http://support.apple.com/kb/TS2802

  • IPAD 2 ,MY  iPAD IS UPDATED, BUT MAP SOFTWARE IS NOT WORKING PROPERLY ,LOCATION/ROUTE

    iPAD 2 ,MY  iPAD IS UPDATED, BUT MAP SOFTWARE IS NOT WORKING PROPERLY ,LOCATION/ROUTE & DISTANCE ALSO...
    CAN YOU GUIDE HOW TO SOLVE THIS PROBLEM....WAITING FOR SAME.
    VIRAL THAKKER- INDIA.
    ALSO, I HVE SOME PROBLEM IN MACBOOK SOFTWARE OPREATRING SYSTEM IS 10.6.1 AND TRY DOWNLOAD 10.6.8...BUT DON'T KNOW AFTER DOWNLOADING,I M NOT ABEL TO RUN IN MY MACHINE .
    ANY BODY CAN GUIDE ME? TO SOLVE THIS PROBL.
    VIRAL THAKKER INDIA

    Try this: Open up her Home folder (house icon), click Library then Preferences. Locate com.apple.softwareupdate.plst (I don't have my Mac handy so I can't double-check the name; that should be correct) and move it to the desktop or trash, then try running Software Update again. Also try running Software Update while logged in as another administrator.
    ~Lyssa

  • Had to reset router, wired connection fine wireless not working even w/out security

    hi, after that freakin blackout that made my internet stop workin, i did a complete reset to my router, and reconfigured it all over again, now i can connect to the internet if im wired to it but if im wireless i cant (tried with other laptops, xbox and it wouldnt work) i even left the wireless without security but its the same, when i click on connect to my network, it hangs forever "connecting" and in the end it remains unconnected... BTW i have a button in wireless settings "Status SES Inactive" which in the first firmware version it wasnt there, and i dont know what its for and if i should use it (what is "SES"? its not in the help manual)

    hi..
                                hmmm.....i hope i cn help u im not so sure if it will work but then try to do so....
                               access the set-up page...try 192.168.1.1 or if it will not prompt for  a username and a password just in case that u r n a dsl connection use this 192.168.2.1...launch internet explorer and type 192.168.2.1 on the address bar u shud be promted with a username and password
    leave the usrname blank and passwrd is "admin" if ever admin password will not work try to type in any password tht u can possibly use and after that u must be able to access the router's set-up page....
    on the router's set-up page
    click on wireless tab
    change the ssid or network name to ur preferred network name like ur name or ur lastname...
    after that click save settings and it will tell u if saving the settings is succesful.....
    after that click again on wireless tab and click the wireless security tab
    and then change the security mode to WPA personal or if ever u can't see the WPA personal click on WPA pre-shared key and type on the wpa pre-shared key box the network key for ur router it is like a password for ur network.....type in at least 8 characters....
    and click save settings.....
    and then close that window and try on ur wireless computer to view avaliable network and then refresh network list and look for ur network name and hit connect there the comp will ask for a network key type in there ur network key....
    take care...
    i'm not sure if it cn help u but just try to do so...

  • Only the wireless is not working on WRT54G Router

    I have been using this wireless router for a while now. We had a snow storm couple of days ago and since then the wireless portion of it is not working. I have Vonage and other power adapters connected through the other ports. All of them work fine except for the wireless. I have been trying on 2 laptops and the cell phone but had no luck even after doing  a hard reset on the router. Any ideas would be greatly appreciated.

    Snow storms do not affect wireless connections. We have close to a meter of snow on the ground.  Temp -22 with windchill -30 does not affect my wireless connection on a WRT54G router.  You may have had a power faillure or power surge that killed your router.  Make sure your wireless is set to enable,  Use a unique name for your network.  Do not use Linksys as your network name. Enable the wireless switch on your laptop. 
    Greetings from Northern Ontario, Canada

  • WRT54G wireless not working after upgrading to windows vista, please help

    Hello everyone....
    I have a few problems. I upgraded to Windows Vista and cant seem to get my wireless internet working. My router is WRT54G wireless-g broadband router. Ever since I upgraded Vista my xbox 360 will not connect.
    I just bought a new wireless web camera and that does not work either because the wireless is not working.
    Any suggestions on what I should do to solve this issue?
    I noticed when I goto 192.168.1.1 my firmware version is Firmware Version: v3.03.9 does that have anything to do with it? Is there a more up-to-date version that will help?
    Hope to hear from someone.

    I have the same problem, and so does my son, he has a toshiba satellite new laptop and I have an acer new laptop, both have Vista on them, and my wife has XP and has no problem getting on teh router, but i have this problem everyday.
    Eventually it will all of a sudden show up and connect and start working, then if you laeave your computer in standby movde overnight, it will still work in the morning, but if you shut down comeplety you will lose the connection for who knows how long. what is the fix Linksys?
    (Edited post for guideline compliance. Thanks!)
    Message Edited by JOHNDOE_06 on 12-28-2007 07:28 AM

  • Intel 6205 wireless not working with Lenovo W520

    Loving the new W520... very fast, if only the wireless would work. Unable to get wireless interface functioning, won't even show up in ifconfig. I've appended requested wireless information, thanks in advance for any assistance.
    1) Machine Brand and Model (PC/Laptop):
    Lenovo W520
    Intel Centrino Advanced-N 6205
    Note: Wireless switch on lefthand side enabled, bluetooth led lights up but wireless does not.
    2) Wireless Brand, Model and Wireless Chipset:
    $ lspci -nn
    03:00.0 Network controller [0280]: Intel Corporation 6000 Series Gen2 [8086:0085] (rev 34)
    3 ) check interface:
    ifconfig does not show wireless
    $ iwconfig
    lo no wireless extensions.
    eth0 no wireless extensions.
    4 ) Check for modules:
    $ lsmod
    iwlagn 215351 0
    iwlcore 139688 1 iwlagn
    mac80211 269644 2 iwlagn,iwlcore
    cfg80211 167809 3 iwlagn,iwlcore,mac80211
    5) Kernel boot messages
    $ dmesg
    [ 13.497936] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
    [ 13.497938] iwlagn: Copyright(c) 2003-2010 Intel Corporation
    [ 13.498058] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 13.498089] iwlagn 0000:03:00.0: setting latency timer to 64
    [ 13.498181] iwlagn 0000:03:00.0: Detected 6000 Series 2x2 AGN Gen2a, REV=0xB0
    [ 13.499187] lp: driver loaded but no devices found
    [ 13.502642] alloc irq_desc for 22 on node -1
    [ 13.502645] alloc kstat_irqs on node -1
    6 ) Network configuration
    $ sudo lshw -C network
    *-network UNCLAIMED
    description: Network controller
    product: 6000 Series Gen2
    vendor: Intel Corporation
    physical id: 0
    bus info: pci@0000:03:00.0
    version: 34
    width: 64 bits
    clock: 33MHz
    capabilities: pm msi pciexpress cap_list
    configuration: latency=0
    resources: memory:d5300000-d5301fff
    7 ) Scan for networks:
    not relevant as no wireless interface appears
    8 ) Ubuntu Version:
    Ubuntu 10.10
    9 ) Kernel/architecture (including 32 vs. 64 bit):
    2.6.35-28-generic x86_64
    10 ) Restarting the network:
    sudo /etc/init.d/networking restart
    * Reconfiguring network interfaces... Ignoring unknown interface eth0=eth0.
    [ OK ]
    Additionally, modinfo shows the following:
    $ modinfo iwlagn
    filename: /lib/modules/2.6.35-28-generic/updates/compat-wireless-2.6.36/iwlagn.ko
    alias: iwl4965
    license: GPL
    author: Copyright(c) 2003-2010 Intel Corporation <[email protected]>
    version: in-tree:
    description: Intel(R) Wireless WiFi Link AGN driver for Linux
    firmware: iwlwifi-4965-2.ucode
    firmware: iwlwifi-5150-2.ucode
    firmware: iwlwifi-5000-2.ucode
    firmware: iwlwifi-6000g2b-4.ucode
    firmware: iwlwifi-6000g2a-4.ucode
    firmware: iwlwifi-6050-4.ucode
    firmware: iwlwifi-6000-4.ucode
    firmware: iwlwifi-1000-3.ucode
    srcversion: 8F7F4C6196599FCA596C837

    Hi  sparhk, and welcome.
    One of the Lenovo staff who frequents the forum put out a call to help you in a private forum.  I do a little Linux, so I poked into it.  To my amazement my first Google hit was your thread where you indicate you have solved the problem.  (At least, it _looks_ like you...)
    May I respectfully suggest that a post back here indicating success would be a nice touch?  That way anyone who passes by looking for help with this issue will have a better chance of finding it.  For posterity, here it is (see post number 25):
    [SOLVED] Intel 6205 wireless not working with Lenovo W520
    Glad you got it working,
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Wi-fi not working in WRT54GH router

    Hi,
    My router (WRT54GH) doesnt seem to be enabling the wi-fi network. Non of my devices are able to detect the wireless netwrok. Please help.
    Thanks,
    Nida

    Hi, I already posted a reply to your question in the previous thread that you created. Link below:
    http://homecommunity.cisco.com/t5/Wireless-Routers/Wireless-not-working-in-WRT54GH/td-p/551730

  • Time Capsule not working as a router

    I've done a search, but can't find anything that jumps out to me as the same issue.
    I've recently ditched all my PC gear.  Now have the following:
    Mac Mini
    2TB Time Capsule
    MacBook Air
    iPad
    My issue is with the internet connectivity of the Time Capsule.  I have the mac mini connected via Ethernet.  It can get on the internet no problem.  None of my wifi devices can at all.  My ISP only allows two devices to ping out, and they need to be registered via MAC address.  No big deal, except my Time Capsule isn't functioning like a router.  So, the MAC address of my Mac Mini is registered, and it's working, but I can't register the Time Capsule.  I'm pretty sure I'm missing something easy, but can't for the life of me figure out what it is.  Figured instead of banging my head against the wall, I'd see if anyone had something similar happen to them?

    Register by MAC address to the first device is generally used by cable companies. But the Modem acts as the first port of call and whatever device first is turned on, picks up the public IP address and the MAC is registered. It just works. 
    Your issue might be that the first device to register has a very long lease. Since you cannot power cycle you should ask the IT admin of the building who controls this setup to release and renew the IP after you plug in the TC otherwise it will not be recognised.. for days or weeks or however long the lease is set to.
    But it could be 24hours.
    Plainly you got the Mac Mini working.. how did you do that??
    Sometimes you can just try overnight.. remove the Mac and plug in the TC.. but it is far easier to talk to the admin and get him/her to simply renew the lease.
    The other method we use is spoof the MAC address of the device currently plugged in. ie grab the MAC address of the Mini and use it in the router.. to pretend it is really the Mini.. the router on the other end is none the wiser.
    TC AFAIK, has no ability to spoof, but almost every other broadband router made can do it. Apple designed it for lowest common denominator in terms of networking ability.. to put it mildly.
    Note your internet might be already behind a NAT.. if you use the TC or any other router in NAT mode there is an issue of double NAT with every site that requires interactive connection because there is no possible link from the site to your PC by forwarding the port. Double NAT effectively blocks it.
    Check the IP you have on the Mini now.. if it is a private address.. ensure it is not 10.0.x.x by the way otherwise the TC will not work due to routing considerations. But any of the private IP address ranges are not routable over the internet and will give you issues.
    http://en.wikipedia.org/wiki/Private_network

  • S10-3t bluetooth and wireless not working with windows 8

    S10-3t bluetooth and wireless not working with windows 8. I tried everything but doesn't work at all. I don't know where to find the new drivers that are comatible with windows 8 ???!!! please help me to solve this problem because i tried everything....

    Do you still have your windows7 install files ? 
    ( installation image is usually in LENOVO_PART OKRBackup/Factory ) ? I lost them :\
    if yes I fear you have to enable it in win7 and then use it in win8
    http://rzr.online.fr/q/lenovo# g470 s103t (Please Contact me if your s10-3T is booting win7 or support bluetooth, 3g)
    Lenovo S10-3t | Model Name : 0651 | Mfg Date: 2010/06/08
    Lenovo G470 | Model Name : 20078 | M fg Date: 11/03/23 | BIOS: 40CN23WW(V2.09) 06/20/2011 | CPU: i5-2410M | Linux version 3.3.4lenovog470+ (root@lap) (gcc version 4.6.3 (Debian 4.6.3-4) ) #8 SMP Tue May 1 10:23:48 CEST 2012
    OS:GNU/Linux/Debian

Maybe you are looking for

  • Keynote vs Powerpoint

    A friend of mine sent me a Powerpoint presentation with sound. I cannot open the presentation in Keynote with the embedded sound track. My wife can open the doc with Power Point on her Dell and it will play the embedded sound. Any suggestions, beside

  • FCP to flv?

    I am ready to send my website programmers final video for my site. The end size is 617 x 411 - a proportionate reduction of 720 x 480. They want it in .flv. I am on a Mac with MPEG Streamclip & QT Pro. I am using FCP 6. What would be the best way (pr

  • Not locking

    My iPod Touch (2nd Generation) lock button isn't working so I can't lock my iPod device and I can't take screenshots either. I've reset the iPod to factory settings and it still didn't lock after. Can anyone help me please?

  • Is there any way to enlarge a cursor on a graph, or attach a .bmp image to it so that it shows up better?

    I am using an intensity graph to display position (and information) from GPS, using the graph's cursor, point only without crosshairs, to indicate the location. Sometimes it is hard to find the cursor. I would like to enlarge it, make it flash, attac

  • Downconverting HD to SD  -- background images sometime look jittery

    I have made many SD dvds of this project along the way. The previous ones were fine. I haven't changed the way I make them and am even using same kind of DVDs, but now suddenly the quality is terrible. In addition to background images appearing jitte