Pavilion dm3 can't recover using flash drive created using hp instructions

I have a pavilion dm3 so no dvd drive. Created a flash drive using hp instructions. Recovery doesn't work. Get a message that I have a bad image and windows is shut down.

If you have already burned a Recovery Disk set on the USB, you will probably have to reset the Recovery Creator software before the usb set can be made again:
http://www.ehow.com/how_6671484_reset-hp-recovery-cd-builder.html
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01890478&cc=us&lc=en&dlc=en
THX

Similar Messages

  • Can I use flash drive in Windows that install on Oracle VM Server

    Dear everyone,
    I install Windows server 2003 on Oracle VM Server x86. I can use .iso file by copy iso file to /OVS/iso_pools and add resource. But I want to use flash drive on Windows server 2003 that installed on Oracle VM. I don't know how to do or it can do. I want to plug flash drive in Oracle VM Server and can use it on Windows server 2003
    Thank you so much for advance
    Fujimaru

    It looks like you will not be able to use it without continually stopping and starting the guest and editing the vm.cfg file to add the physical device once it is mounted on the DOm0

  • Can same flash drive be used on mac and pc?

    can same flash drive be used on mac and pc?

    ok because i fried a Hp drive yesterday but it never asked me to format

  • I am new to the Apple world and yesterday i bought an APPLE IPAD (4th Gen) .. My Question is "Can we connect a flash drive to the IPAD4 and transfer pdf files to and fro"??

    Hi all,
    I am a newbie to the Apple World and Yesterday I bought an APPLE IPAD (4th Generation).. My primary purpose is to read pdf files on IPAD4.
    I have 3 questions ..
    1. Can we connect a usb flash drive to the ipad4 and read pdf files from it?
    2.  I am using windows since 2000 and accustomed to the file explorer and file management in it. Can I get such kind of environment in IPAD4 ?
    3. Do I have to sync the IPAD too often?
    Regards,
    Manikanth

    Sandisk has recently come out with a device
    http://www.sandisk.com/products/wireless/flash-drive/
    Never used it so I can't comment on whether or not it works well. There are very few devices out there that allow file transfer without going through iTunes or via the internet. IMHO, one real weakness of the iPad, great for consuming data, however not very fully featured when it comes to moving data around, especially if that data doesn't come from iTunes or other online source.
    there is also a device called a WiDrive
    http://www.kingston.com/us/usb/wireless
    that is also a wireless drive for iPads.

  • Can I download adobe flash drive on iPad to Crete book on shutterfly

    Can I download adobe flash drive on iPad to Crete book on shutterfly

    Flash is not available on iPad. Apple doesn't allow it. You need to use whatever app they may provide to that end or use the normal web interface.
    Mylenium

  • MDT Image Deployment Using Flash Drive

    Hi,
    In my environment i am using MDT 2010 image deployment process to deploy Windows XP and Windows 7 OS images,
    As image deployment is foccussed on multiple remote locations we have planned to move with USB Flash drive (Pen Drive) for image deployment,
    The problem occurs here in normal system through diskpart utility i can able to get all the disks including my flash drive but in win pe mode i am unable to get my flash drive listed in diskpart utility.
    so the image deployment process hangs on to the microsoft solution accelerator screen i am unable to predict the actual reason but i can predict this can happen because of mass storage driver problems.
    I tried the same using USB Hard Disk and succeded with the deployment and i am unable to guess what makes difference between USB Hard disk and USB Flash Drive.
    Can you just help me out on this to close the problem ASAP..
    So that i can proceed with my roll out activities.
    Thanks in advance,
    Siva

    Hi,
    At last the image deployment using flash drive works for me.
    I attempted the following steps,
    First i converted the flsh drive to bootable flash drive using diskpart utility,This can be done in Windows 7 Operating system only.
    navigate to cmd and type Diskpart,and enter the below commands,
    List disk
    Select Disk no
    create partition primary
    select partition no
    active
    format fs=ntfs
    Assign
    Exit
    Upon completition,Insert windows 7 DVD to the system and do the following
    Navigate to DVD Drive in my case it is G: and change directory to boot
    G:cd boot
    G:\Boot>Bootsect.exe /nt60 I: where I: is my flash drive
    Then copy the contents to the Usb flash drive and change the first boot device of the target system to local hard disk and deploy the image
    while in Win pe mode use disk part utility to check whether your disk got detected.
    If everything is ok then it will work.
    Thanks for your valuable time.
    Thanks and Regards,
    Siva
    Thanks Siva Aadhi-CIT. MCITP

  • USB Flash Drive & power using Hub

    Interesting fact -- my iMac can accept my USB Flash Drive on the convenient keyboard hub without any problem. However, when I reboot using Boot Camp into Windows XP Pro -- It cannot! It says insufficient power & I must use one of the USB ports on the (less convenient) rear of the iMac. This isn’t a major issue for me since I mostly am using OS X & rarely use Windows & even less often need to use a USB Flash drive from Windows. However, I do need to unplug something else (the Apple Modem) on those rare occasions when I wish to plug in a USB Flash Drive  while in Windows. BTW, I use SanDIsk Micro Cruzer with the U3 software --which doesn’t work with OS X -- deleted.
    I would think the power requirements would be exactly the same -- being as the hardware (computer & flash drive) is identical whether I’m running OS X or XP Pro.
    Strange.

    thomas.adkins wrote:
    On previous versions of Network Magic, when adding a laptop to my wireless network, an option would appear for using a USB flash drive to transfer settings and/or password to the new machine. 
    After a few "upgrades" to NM, the option ONLY appears after I turn my security off.  If I leave my WEP security ON, the only option that appears is to "copy" the 32-digit password & enter it on the laptop.  However, I keep getting errors.
    Is there a procedure to use a USB flash drive to connect a "new" laptop to my secured wireless network?
    Thank you.
    Hi thomas,
    If this is your own New Laptop to your Network, and even after you supplied the password, the problem is the Network Lock is still on. You need to disable the Network Lock. Enter the password, installed Network Magic if the Laptop is your own. You need to stop tracking your Laptop as an intruder on your other copies of Network Magic.
    Then you need to reenable the Network Lock from your Wired Computer. Use your other computer to activated the copy of Network Magic installed on the laptop.
    thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
    Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

  • Artwork doesn't transfer to my Kingston flash drive for use in my car.

    I am transferring songs to my Kingston flash drive for use in my car.  When I copy them from my folder and drop them in the flash drive the album artwork doesn't transfer.  I deleted the artwork from the songs of 1 CD, saved a jpg to my desktop and added to each individual song which works but would be crazy to do for all of the songs.  I am running ITunes 11.05. 
    I've looked in the communities but couldn't find anything about this.  Is there a way to revert back to ITunes 10?

    Placing your iPhone in the toilet was the correct thing to do but you should have purchased an android phone instead. That would have solved these issues. :-)

  • Can I get a flash drive recovery Lion

    Can I get a flash drive recovery Lion

    You cam make your own:
    http://support.apple.com/kb/HT4848
    Regards,
    Colin R.

  • Can I load adobe flash drive on the I-pad or is there an alternative?

    can I load adobe flash drive on the I-pad or is there an alternative?

    Flash is not, and probably never will be, supported on the iPad - and Adobe have never managed to make a version of their flash player that works on iOS devices, and they've recently announced that they are stopping development on all mobile versions of it.
    Browser apps such as Skyfire, iSwifter Puffin and Photon 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store, and there is the built-in YouTube app.

  • Can I unplug the flash drive while installing OS X?

    I'm installing OS X 10.8 from USB flash drive.
    While it's "Installing OS X On the disk Macintosh HD" can I unplug the flash drive or does it need to be left in for the duration of the install?
    Thanks.

    The flash drive version would be a new purchase ($69).

  • So can i Recover to the factory setting using F11 with no disk ?

    So can i Recover to the factory setting using F11 with no disk ? 
    This question was solved.
    View Solution.

    Hi,
    If your Recovery Partition is OK, then you should have no problem with this method.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I gave my father a mini ipad and he forgot the icloud password and the e mail for recovering it.  How can I recover the password or create a new one if I have no idea at all of the info he configurated.?? ;(

    I gave my father a mini ipad and he forgot the icloud password and the e mail for recovering it.  How can I recover the password or create a new one if I have no idea at all of the info he configurated.?? ;(

    He will have to contact Apple and speak to someone in account security if he can't recover it at https://iforgot.apple.com/appleid

  • Can I use flash drives to transfer data from one MBP to another at a differ

    I've looked and cannot find any info on the use of flash drives. Can I use a flash drive to transfer data from one MBP to another one at a different location? (ie; school Apple and home MBP) Grade tests and papers at home, enter data into home computer, then put it on flash drive and carry flash drive to school, transferring data to school desk top? Are certain flash drives preferrable over others, name brands, size, etc?

    Yep, you sure can. Just about any drive will work as mentioned above. But I'm partial to SanDisk and PNY. I've used both and they work great! Currently I carry both a 2GB SanDisk Micro Cruzer and a retractable 2GB SanDisk Cruzer, both really nice. Replaced my oldie but goodie 256MB PNY drive that I've been using since they first came out.

  • How can i use Flash Drive in V880 with Solaris 8

    i want mount pen drive(flash drive) in my V880 server where i install Solaris 8. so what is the procedure?
    thanks

    Two bugs, one affecting Apple's Mac platform and another attacking Microsoft's Windows, exploit certain Flash player vulnerabilities to install malware onto users' systems, reports ArsTechnica. While users of other operating systems like Linux have yet to report attacks, Adobe's advisory notes the exploit affects all platforms.
    Designated as CVE-2013-0634, the first vulnerability targets the Safari and Firefox Web browsers running on OS X, and is also being used as a trojan to deploy Microsoft Word documents containing malware. For Mac users, the flaw affects Adobe Flash Player version 11.5.502.146 or earlier.
    On March 1 Apple again blocked Flash Player for Lion and Mountain Lion:
    http://support.apple.com/kb/HT5660
    The Adobe Flash patch can be found on Adobe’s website, and users can visit this page to check if their software is the most curent version.
    You should uninstall any previous version first, and repair permissions after installing the new version.
    If you still get a ‘plug-ins blocked’ message:
    http://support.apple.com/kb/HT5271
    You can check here:  http://www.adobe.com/products/flash/about/  to see which version you should install for your Mac and OS.  The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/909/cpsid_90906.html
    and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

Maybe you are looking for