Pavilion dv 9500

My problem in windows 7 is no sound ."no sound device installed" in my laptop.
There is an x against the speaker in the lower task bar.I have tried windows update
and downloading drivers but without success.I have tried registry repair.Tried many
combinations.At this stage I am seriously considering resorting to reinstalling Windows 3.1
where at least I can hear the beep sounds or maybe ms- dos might seem inviting on my
pc sx 485 with 1 mgbyte of hard disk.Did anyone see my bbc micro around ?
This question was solved.
View Solution.

Well good news my briney friends.Have I got a tale to tell ! Meself was the only soul on this God forsaken
island 'till the other day. I was doin a spot of fishin in the coral reef when I spotted a strange object on the horizon. Could'nt figure for ages what it might be ! Hoping it might be a keg of sailor's rum.But alas my hopes
were dashed when it appeared to be a man overboard from a passing ship. I drags him ashore and gave him a hearty meal of fish and coconut.When he had come to himself I asks him his name.He told me it was Gates and I says to him "did your dad run a forge and make gates for the local folk" He got very agitated and tried to show me what he did by drawing funny items in the sand !He mentioned something about installing windows so I reckoned he was a glazier though his hands didnt seem rough.He asked me how I got to be stranded on the island and I related my tale.His first name was Bill and we talked about ould times gone bye.He had been headn to india on board a spanish man o war when Blue Beard captured the vessel an threw the lot to the sharks. I showed him my laptop and he was of the strong opinion that I had nicked it from the smithsonian museum.Well, he said, there's no sound on you tube, are these the silent movies !? Sure I was offended ! Go back, I says to installing them round bits of glass ye call windows 7 an don't be bother'n me poor hed.The follow'n morn there was no sight of "bill gates"He kept ravin bout havin two hundred rooms
in his abode.The briney sea can do quare things to a sailors mind.
keep alookout for a message ina bottle
God speed me hearties
Tommo22

Similar Messages

Recovery disks for my HP Pavilion DV 9500 Windows Vista home premium

Does anyone know where I can find recovery disks for my HP Pavilion DV 9500 Windows Vista home premium?? According to HP, disk pn is 446537-004.

Excuse me for not understanding the solution so well....
So I need to purchase an OS for my computer - like windows 7 ??
And I need to download drivers from hp.com - there is a long list of drivers and they are dependent on the operating system - which ones do i need (all??) and supposedly I need to get a new operating system first??
Could I try to just reload drivers before purchasing a new OS - is that possible ?? maybe it is a driver problem and not an OS problem ?? If this is possible, how do I determine which drivers to download and what order to try to install them??
Sorry that I am not so knowledgeable
Thanks,

Nvidia Geforce 9500 GS remplacement de la carte pour HP Pavilion a6734f pour avoir directx 11

Bonjour, j ai non hp pavilion a6734f. quelle carte graphyque DE REMPLACEMENT verser Avoir directx 11
Merci

Hello @t4vtt,
Welcome to the English HP Consumer Forums!
If you prefer to post your question in your preferred language,
French: Forum des utilisateurs HP
http://h30478.www3.hp.com/
Alternatively, please feel free to post a revised message in English.
Thank you, and have a great day!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Pavilion m8400f boots to flashing cursor

My Pavilion m8400f boots to a flashing cursor. It will not boot from a CD. I tried disconnecting the CD-ROM and re-booting - same problem.
I'm trying to boot with my Windows 8, Windows 7, and Kaspersky Recovery Disk. On occasion it would boot from these disks, but now not at all.
Maybe a dirty CD-ROM, but it still wouldn't boot when I disconnected it.
Thanks for any help,
Todd
Processor: AMD Phenom 9500
Operating System: Windows 8.1 64 bit (but it never makes it to Windows before it starts flashing)

Hello @GreenGoose,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your desktop computer boots to a flashing cursor, and I would be happy to guide you towards a resolution!
To successfully boot into Windows, I recommend following the steps in this document on Computer Stops at Black Screen with Flashing Cursor (Windows Vista). This should also help to prevent the appearance blank screens in the future.
I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate which operating system you had previously installed; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Pavilion Elite e9180f freezes, crashes, BSOD

I am one of the many unhappy customers who bought this piece of junk (Pavilion Elite e9180f) and waited too long to return it because in my naivete, I thought it was some kind of simple software issue. Nope! It's definitely something wrong with the hardware, because the freezes and crashes have been happening since day 1, right when I took the thing out of the box.
Yeah, the system is fast and runs Windows Vista great, when it's actually WORKING, which is usually only guaranteed for about the first 5 minutes after you power the system on and boot windows. After that, it's just buying time before it crashes again. Forget trying to get anything done on this computer. Forget about asking this PC to play a video or music file without the files "stuttering" during playback. Even my 7 year old Sony Vaio which is running XP can handle playing an MP3 file without stuttering and crashing!
Like everyone else, the freezes and crashes happen either one of two ways:
1) The machine begins to "stutter", stutter more, then freeze/crash. When I say stutter, I mean I move the mouse, the pointer graphic will hesitate on the screen and lag behind. If you start to play a video or music file, this manifests in an audible "stutter". The stuttering gets worse and worse as minutes pass until eventually it freezes for good, blasting that 1/50th second moment of audio into infinity. You have to reboot immediately if you don't want to go deaf or be driven mad.
2) I will be doing nothing at the time (example, I close all programs out and leave Windows sitting on the main desktop screen), I'll walk out of the room for a minute, then come back and find I can't move the mouse. This system will often lock-up without any warning!
Sometimes I'll get a BSOD or error screen, sometimes I won't (in which case your only option is to do a cold re-boot.) When I do get the BSOD, the error is ALWAYS the "did not get a response from the secondary processor" yada yada. I wish HP would just admit they shipped this model out with a bad processor/motherboard/whatever and do an official recall. I have owned PCs for the last 13 years and this is the worst and most consistently disappointing experience I have ever had.
What is the hardware issue? Which part is the lemon part? The motherboard? The processor? The BSODs seem to indicate a bad processor. I do have the Pegatron Truckee version 1.03 motherboard. Is that the problem?
P.S. I have contacted HP on many occasions about this, literally stayed on the phone for hours with "customer support" (according to one HP rep, 80% of their customer service reps are based outside of the United States...good luck getting any "technical" help from them) to no avail. I did talk to one nice tech support guy in Canada who said "it sounds like your unit has a bad processor", so he had HP send me a box to ship my unit to their repair center so they can replace the processor. However, I have also had HP reps tell me it could be anything from the memory to the hard drive. Multiple HP reps claimed to me that they have "received no complaints" about this system. One guy told me he "thought he got an email last week" regarding "something" about the system, but couldn't remember what it was and he put me on hold while he searched for the email. He never found it. What a joke.
EDIT: Just to clarify, the crashing issue has been happening since day one, but initially I thought it was an issue with Vista. I had never owned or used Vista before, so I thought maybe Vista was just unstable. Nope. I know several people who own Vista and have never experienced these issues. I have downloaded every update from Microsoft/Windows Update. I have upgraded to Vista SP2 with all the latest drivers and software for all of my hardware. No luck. It is definitely a hardware issue. Thank god HP's warranty is good for 1 year (I bought my Elite in July).
Message Edited by Doonyman on 09-24-2009 02:58 AM

Unfortunately I have to add my disastrous encounter with HP's E9180F a true lemon HP is selling. I must take some responsibility for not carefully researching this model before I purchased, but I trusted the HP name and got stung- big time.
The scoundrel :
HP and its Pavilion Elite e9180f
Windows 7 64bit
motherboard - Pegatron Truckee ver 1.03
BIOS ver 5.22Intel Core i7 920 @ 2.67GHz
Memory 9206 MB Ram
As so many others have reported my HP E9180f started locking up and going to BSOD right out of the box. My first freeze-up came when I was doing the Windows update process. At first I didn't think much about it but I started getting random freezes a couple time a day. At that point I went online to see if others had experienced the same problem and perhaps had a fix. What I found was very troubling; I found extensive documentation describing my exact problems and what was really horrifying was the reports of how ridiculous HP's help services were treating people with the problem. At first I didn't totally believe what I was reading on HP's own customer forum; I do now.
·         I've went through the total recovery process three times now, HP techs have spent hours remotely running my computer, (yes it did lock up on them to)
·         I had to upgraded the BIOS. (HP tech tried, said he had, but he hadn't)
·         I was directed to clear the BIOS (luckily for me I had the tools
·         Updated all drivers again and again.
·         Next I was asked to remove the video card, memory, and motherboard power cable and reseat them. I declined because I didn't want to give HP any reason to void my HP 2 year House Call Care Pack which covers this unit. When I invited HP to send a service tech out to perform these tasks, they said that house call only covers part replacement, we weren't replacing a part. I couldn't believe what I was told. Are you feeling my frustration?
Keep in mind that each time HP requests that I make changes, they then ask me to test the system, which I did and each time with the same result, BSOD
I'm heading into my fifth week of working with HP to fix this problem. and I still haven't even been able to get my case moved up to a senior case manager, what a joke HP's help process is.
One conversation I loved was;
HP tech: "I'll have a senior case manager call you within 24 hours."
Skeptical me: "What should I do if I don't get a call?"
Silence, no response.
Me again: "What should I do if I don't get a call?"
HP tech: "That's an impossibility."
Guess what? The impossibility became reality (I bet you guessed) .
HP's last stall tactic was to have me fax them my proof of purchase and invoice and call back in 24 hours. Where have I heard that before? Apparently nothing can go forward until they receive it. So I faxed them the stuff within 10 minutes, and when I called back 24 hours later, guess what, you're right it wasn't on their system yet. I asked couldn't I be escalated to a senior case manager (it's apparent that only a senior case manager can do anything). "No," was the tech's reply, "call back again later".
Please if anyone out there knows the secrete to getting a senior case manager, or an HP tech support number here in the U.S. so I can get this thing fixed I'd love to know it.
Fast becoming HP never again.

Possible to connect an external monitor to HP Pavilion dv4t-4200 CTO Entertainment Notebook PC

I have a HP Pavilion dv4t-4200 CTO Entertainment Notebook PC model # A1M02AV and it has a VGA port, one that looks like a phone/broadband cable port, and one that looks like a USB port but indented on either side at the bottom. Can I even connect an external monitor? How do I find out if I have more than 1 video card? Besides the usual USB/headphone ports, I don't have any other ports. It says my drivers are up to date...but I don't even know what I should be looking for. Do I need to install something or buy some sort of adapter?
I am trying to connect a Dell external montitor via the VGA port with a VGA cable. The monitor has power but my notebook does not recognize/detect it. However, when I first plugged it in, my notebook display shrank into a square (vs the whole screen) so it recognized something...but nothing happened on the external monitor.
I tried detecting it via my display settings, but I accidentally changed some dispaly setting so that the home desktop only shows on monitor 1, but unselected my actual notebook display or something or changed it to be monitor 2 (even though monitor 1 does not exist), so when I plug the cable in to my notebook, all of a sudden my desktop goes away and it's a just a blank background screen - and I cannot access the computer display settings or anything.... when the cable is unplugged this setting looks normal, so I can't figure out how to fix it.
Sorry, I have no idea what I'm doing here - please help!
This question was solved.
View Solution.

Hi,
All Dell monitors come with CD's for drivers. Your laptop may not know the monitor w/o its driver, it won't install automatically. Please check:
Ringht click a blank space on desktop,
Click Personalize
Click Display
Click Change display settings
Can you see BOTH laptop screen and external monitor in there as shown on the following image:
For testing, I put my Dell monitor is my main display. If I can't see 2 monitor, you need its driver first and then check the cable.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Is it possible to upgrade/add a graphics card to a Pavilion dv7-7000 laptop?

I've been doing a lot of research lately, to mostly no avail, about whether or not my HP Pavilion dv7-7025dx laptop can have a dedicated GPU added to it, as currently it only has the integrated Intel HD 4000 Mobile graphics card.
Mostly I've come across the unfortunate agreement that most laptops cannot have their graphics cards upgraded/swapped out, since the graphics card is soldered on to the motherboard. However, after talking to an HP "support representative", they said they believed it was possible to add a graphics card, as long as it is compatible with the HM77 45W UMA Motherboard my computer has.
Furthermore, after finding the maitenence and service manual online for my computer ( http://h10032.www1.hp.com/ctg/Manual/c03221579.pdf ) it says that it could have come with switchable graphics, specifically the Nvidia Geforce 630M or 650M.
So I am wondering, is it really at all possible to add a dedicated graphics card, either by having switchable graphics or something else? Or am I stuck with the integrated Intel HD graphics?
If I can upgrade/add a new card, where would I be able to find/buy a compatible one, and would I be able to install it myself or would I need to go to a local computer repair?
My laptop is the HP Pavilion dv7-7025dx Entertainment Notebook.
It has an Intel Core i7- 3610QM CPU @ 2.30 GHz, 8GB memory, 750GB hard drive (5400 rpm).
I am currently running Windows 7 Home Premium SP1 (64-bit).
Any other specifications can be found here:
http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lang=en&lc=en&product=5263030
This question was solved.
View Solution.

YoureInMySpot wrote:
I've been doing a lot of research lately, to mostly no avail, about whether or not my HP Pavilion dv7-7025dx laptop can have a dedicated GPU added to it, as currently it only has the integrated Intel HD 4000 Mobile graphics card.
Mostly I've come across the unfortunate agreement that most laptops cannot have their graphics cards upgraded/swapped out, since the graphics card is soldered on to the motherboard. However, after talking to an HP "support representative", they said they believed it was possible to add a graphics card, as long as it is compatible with the HM77 45W UMA Motherboard my computer has.
Furthermore, after finding the maitenence and service manual online for my computer ( http://h10032.www1.hp.com/ctg/Manual/c03221579.pdf ) it says that it could have come with switchable graphics, specifically the Nvidia Geforce 630M or 650M.
So I am wondering, is it really at all possible to add a dedicated graphics card, either by having switchable graphics or something else? Or am I stuck with the integrated Intel HD graphics?
If I can upgrade/add a new card, where would I be able to find/buy a compatible one, and would I be able to install it myself or would I need to go to a local computer repair?
My laptop is the HP Pavilion dv7-7025dx Entertainment Notebook.
It has an Intel Core i7- 3610QM CPU @ 2.30 GHz, 8GB memory, 750GB hard drive (5400 rpm).
I am currently running Windows 7 Home Premium SP1 (64-bit).
Any other specifications can be found here:
http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lang=en&lc=en&product=5263030
Hi,
You can't add a dedicated graphics card to the system like this. The vga is soldered to the board so no way you can just plug it in like on a desktop. However, you can buy a new motherboard with the dedicated graphics card on it. It also requires a new heat sink.
Manual: http://h10032.www1.hp.com/ctg/Manual/c03221579.pdf
You need a 682040-001 board plus 682061-001 heat sink to have a dedicated graphics card on your laptop. Have a look on ebay for the part numbers.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Can't install HP Color LaserJet CM1312nfi MFP at notebook HP Pavilion

I bought new notebook HP Pavilion 13-a051sr with Windows 8.1 (x64) onboard.
I'm trying to install HP Scan.
While installing all-in-one HP Color LaserJet CM1312nfi MFP using "CM1312series-win7-full-solution-AM-EMEA1-v5.1.exe" can not get after the dialog window "Locating the printer". Printer could not be found even if I write down printer' IP-address. The latest printer firmware is already installed. Firewall is disabled, antivirus is closed.
I installed printer without any problems using it IP-address. What can I do in order to install scanner module?

HP Print Drivers

Duplex printing problem with hp 9500 (right side always just half printed)

Since OS X 10.6 was released there is a problem with the print out of duplex printed pages (specially via Indesign CS4 broschure printing function). Using Mac OS X 10.5.8 with old and new driver everything is fine - but under 10.6, 10.6.1 or 10.6.2 neither old nor one of the new driver releases 2.1, 2.2 or 2.3 will work.
When I´m trying to print a duplex printing page the print of the right page will be cutted off at the half of the page - like the page would not print A3 horizontally but vertically (so the rest is cut off). The new print features within the printing menu (manual duplex print and print broschure will have same effect but with a strange miniaturization to A5 - although it should be A4). All in all the is no way to print out a duplex printing with OS X 10.6 and hp 9500. Will there be any solution in sight? Are there other with the same effect?

I have an identical issue to neuegestaltung, but with an HP 5500. I can print single-sided to A3/tabloid successfully but when I try printing duplex the right quarter of the page is cut off on both sides - almost as if it thinks it's printing portrait.
Applications affected include Adobe Acrobat 8 and 9, Adobe CS3 and CS4 applications including InDesign.
Preview works fine, but of course the colour balance makes the output unusable.
OS 10.6.2, print driver HP Color LaserJet 5500 v 3010.107.
Using the Gutenprint driver I can't either do A3 or colour so there is no solution there.
Worked fully and correctly with the same apps under 10.5.x.
At the moment I am running Windows XP under VMWare to print from Acrobat, which is plainly silly.
Any useful* observations, suggestions or workarounds welcome.
*Needless to say, "It's Adobe's problem" or similar are not acceptable responses. It may well be an interaction between the Adobe's applications and Apple's printing system and/or driver of course; in that case the companies need to collaborate to solve the issue.

Pavilion G6-1203ey: Hard Disk Test FAILED, but can still boot into Windows

Hello
I have HP Pavilion G6-1203ey laptop. After installing Windows (7 ultimate, 64 bit) and some drivers on it and after several restarts, it hanged at Windows logo and I had to turn it off with power button. Then after turning it on, it gave me the option to repair problems which are preventing it from starting up, from there I let it to restore the computer to an earlier restore point and after a restart the Windows was working again. After that I decided to do a hard disk check just in case.
The Hard Disk Self Test ended up with a message: Hard Disk 1 Full (305). Then I installed HP Unified Extensible Firmware Interface (UEFI) Support Environment and did hard disk from there. I chose the comprehensive test from the options, but it finished fairly quickly (in ~1 minute) with the following output:
Testing Drive: 1
Hard Disk SMART Check : PASSED
Hard Disk Short DST : FAILED
FAILURE ID : PTTU22-5T774L-MFPV4K-60S003
PRODUCT ID : A5Q15EA#B1R
Hard Disk 1
Hard Disk Test : FAILED
A bit more background:
The previous owner told me that the original HDD was faulty which is why he replaced it with this one last year. He said that other than that there has been no problems with the laptop. The Windows is working right now and this HDD is quite new so I would not have expected any problems with it, but the results from the previously mentioned tests seem troubling. Is there a reason to worry?
Thanks
This question was solved.
View Solution.

Hi Alnuir,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I read your post and looked into the failure ID that you posted regarding the failed Short DST test. That error is indicating a hard disk failure meaning that if it hasn't failed it might soon. If everything is working I would considering backing up your data on a regular basis just to be safe. You could have a local technician take a look at the hard drive to see how close it is to full failure.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Fresh install Win 8.1 Pro into Pavilion X2 (10", 32GB tablet)

Have a Pavilion X2 (32GB version) with Win 8.1 Bing.
Need to get into domain, therefore wanted to fresh install Win 8.1 Pro, at the same time remove the recovery partition for more space.
F10 to bios to set bootup to USB drive, pops in a Win 8.1 Pro x64 installation disc, but X2 refuses to boot to disc.
Is it the x64 version disc problem or have i missed some setting to make the X2 boot to disc properly??

HI @Nikola84 ,
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
How Do I Find My Model Number or Product Number?
I understand that you are trying to install a clean version of Windows 8.1 ( 64 bit).
What edition of of Windows 8.1 (64 bit ) are you trying to install?
Please provide your exact model of Pavilion 10 x 2.
Regards
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

CAN I INSTALL WINDOWS 8.1 IN MY HP PAVILION G4 2014-TX?

Hello! I want to know if I could install a windows 8.1 pro 64-bit in my HP Pavilion g4 2014-tx. The windows installed in the laptop is windows 7 home premium 64-bit and I want to upgrade to 8.1. I hope you can help me here!

Your computer can be upgraded to Windows 8.1
Suggest you run the Windows Upgrade Advisor to see what may have to be addressed:
http://windows.microsoft.com/en-us/windows-8/upgrade-from-windows-7-tutorial
This will show you how to upgrade::
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03457468
Should you need drivers go to this site when upgraded::
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03457468
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Unable to install Windows 8.1 pro 64 bit on my HP Pavilion g6 1318ax

Hello,
I have Windows 8.1 pro OS on my machine but that's 32 bit. I am trying to install 64 bit of the same but it says "This app can't run on your PC". The machine I am using is Pavilion g6 1318ax.
Please advise.
Thanks in anticipation.
Regards,
Dev

Hi:
You have to boot from the 64 bit installation media and do a clean (custom) install.
It will not run from a 32 bit Windows desktop.
No 64 bit operating system will.
In other words, you can't upgrade from a 32 bit to a 64 bit operating system, and retain your programs and files.
So back up any files you don't want to lose.

How big of a hard drive can I install in my HP Pavilion Elite e9220y Desktop PC

I have a HP Pavilion Elite e9220y Desktop PC I have gotten an error on my hard drive BIOHD-8 imminate failure, I am going to replace my drive and would like to know if I can replace it with a 2 TB?

Hi,
Should be ok to use 2TB HDD and lower. Anything bigger/larger (capacity) than 2.2TB you may get problem and have to do more work to be able to get it right.
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can i perform system image recovery in windows 8.1 hp pavilion g6

recently i upgrade my hp pavilion g6 to 8.1pro..i need to create an system image file of my windows 8.1..so plz give me a detailed procedure...to store it on dvds/online hp backup recovery...
Is this image recovery working properly when my system got in big trouble???

When requesting assistance, please provide the complete model name and product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of the computer, inside the battery compartment, or on the BIOS startup/setup screen. Please do not include the serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
Please use Windows "System Image Backup" utility to create an exact image of the Windows 8.1 partition as it currently is, on an external hard drive. You may also need to create a Windows "repair" disc. If your computer developes issues or you need to replace the hard drive, all you have to do is "restore" the image to the computer. Please see Windows 8.1 Tip: Use System Image Backup for instructions on creating and restoring a "Windows - System Image Backup."
This process is not a system recovery and is different than using Window Restore or Refresh, or HP System Recovery.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Pavilion dv 9500

Similar Messages

Maybe you are looking for