Pavilion dv31075us laptop unable to eject DVD

I need help getting a DVD out of my CD/DVD drive. My laptop does not have a manual eject button. CD/DVDs are ejected by right-clicking the drive in "my computer." However, "my computer" does not recognize this Windows upgrade DVD. So, it looks like I have no way of ejecting this. 
Does anyone know any tricks or loop-holes? I'd love to not have to have my laptop taken apart to eject a disk!
Thanks!

dv3-1000 Series with Slot-load optical drives, should have Eject Button as a part of the Quick Launch Buttons..If that has not worked....Than try the below...
Power on the system, Tap the ESC key, that will take you to the Startup Menu... Over there try and use the Quick Launch Eject Button and check if it eject the disk, if not, That press the F9, that will take you to, Boot Manager, check if the optical drive is listed there...
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Similar Messages

  • HP Pavilion dv9925nr laptop unable to see DVD drive.

    A friend of mine has this laptop that is unable to recognize CD or DVD
    installed on this Laptop.  This device doesn't show up in device manager
    or BIOS setup at all. So how do I correct this problem?  The laptop is
    running Windows Vista home.
    Thanks in advance
    George H.

    Try this. From Vista, got to this website:
    http://support.microsoft.com/kb/314060
    Go to the Resolution 2 and run the CD/DVD drive autofix tool. It will work online and try to correct some software issues that might be blocking the drive from working.
    If that does not work post back and we can walk you through some other possible repairs and ultimately it may just be a bad drive that needs to be replaced. We can help with that, too.

  • Unable to eject DVD after Win7 upgrade on Satellite L series

    I have finished the windows 7 upgrade.
    Everything went smoothly except thta at the end I was unable to eject the windows 7 upgrade DVD.
    Using the push button on it, or right click on the lector then eject, nothing happens.
    Should I look for drivers and where?

    Hi
    You dont need any drivers for that
    If the CD/DVD drive is connected properly then you should be able to eject the disk without any big troubles maybe something clams somewhere
    There is a tiny hole near the eject button use an small object like staple or something like that and put it carefully into this small hole. This should help to eject the disk.
    Cheers

  • Unable to eject DVD from drive - tried all troubleshooting suggestions

    Tried ejecting DVD using eject button on keyboard, using disk utilities, restarting computer and holding down mouse. Nothing seems to work. Any other suggestions for getting a DVD out that was inserted backwards and is not being read by drive?
    Thanks!

    Did you solve this problem? I seem to be in the same perdicament. My DVD-drive has vanished completely from the OS after I inserted a seemingly harmless dvd. And now none of the usual tips work.
    -Bluesbro-

  • Unable to eject DVD

    Tried RESTART.
    No ICON on Desk Top

    If the drive does not eject discs using the F12 or eject key on the keyboard.
    If the disc will not eject try dragging the disc icon to the trash.
    If the disc will still not eject, holding down the trackpad or mouse button after restarting the computer should also eject a disc.
    If the disc continues not to eject, reset the Power Manager (PMU) or System Management Controller (SMC) and try steps 1-4 again.
    http://support.apple.com/kb/ht2801

  • Using an early 2011 15 inch macbook pro to watch a rented dvd. the screen displayed a skipping over damaged section message, then the dvd froze. first unable to eject the dvd, now it can't be inserted. Hardware prblm? reset the superdrive?

    I was viewing a rented dvd when a "skipping damaged area" message was shown and then the dvd froze. At first I was unable to eject the dvd with the eject botton though the superdrive made "ejecting" noises, and followed the cue "finder using dvd" and ejected it. Now the drive will not accept any dvds. Does this sound like a hardaware problem, or is it possible that some sort of "reset" needs to take place?

    Before wasting your time heading to your local Apple Store, try resetting your SMC.  It doesn't work all the time, but sometimes it's just the thing to save you time.

  • A dvd is stuck in my MacBook Pro, and I am unable to eject it.

    I recently used my MacBook Pro to watch a dvd, and I am unable to eject it.  Has anyone else had this experience, and can offer a solution that doesn't require a $29 visit to the Genius Bar?

    Five ways to eject a stuck CD or DVD from the optical drive
    Ejecting the stuck disc can usually be done in one of the following ways:
      1. Restart the computer and after the chime press and hold down the
          left mouse button until the disc ejects.
      2. Press the Eject button on your keyboard.
      3. Click on the Eject button in the menubar.
      4. Press COMMAND-E.
      5. If none of the above work try this: Open the Terminal application in
          your Utilities folder. At the prompt enter or paste the following:
            /usr/bin/drutil eject
    If this fails then try this:
    Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.

  • HP Pavilion Laptop: Unable to open files, error message and "Recovery" drive appeared

    My fairly new HP Pavilion AR5B1425 laptop suddenly displays a big red x and an error message "documents.library-ms (or whatever file I'm trying to access) is no longer working" and is displaying a "recovery" drive listed as "D."  My kids were using my computer, and hubby thinks they inadvertently reset my hard drive or something.  Any ideas?

    Hey reedmiarecki,
    Welcome to the HP Support Forums!
    With the error message that you are getting, your only option would be to do a factory reset of your computer. If you do need assistance on how to complete a factory reset of your computer, please provide me with the full model number. This will allow me to provide you with specific steps. If you need assistance in finding the model number, please take a look at the following document Guide to finding your product number.
    Good Luck!
    I worked on behalf of HP

  • Pavilion dv4405nr laptop hard drive and recovery

    Hi,
    My daughter's Pavilion dv4405nr laptop's HDD (Samsung MP0804H Spinpoint M Series 80GB) is dead. It doesn't boot, and BOIS HDD test gives error 7. I took the HDD out, and connected it to several PCs (home, work) using two HDD universal adapters (like a BYTECC, and a NewTech) I left it spinning for about 6 hours. The PC sees the mass storage device, but it never shows up in MyComputer with a letter assigned. By right-clicking the working HDD and checking its properties, it lists all HDDs and I can see the damaged one listed w/o a letter assigned. I click to load volume information but all displays zeroes. I downloaded a Seagate-Samung utility to test the drive, and got the same error I had gotten with the laptop's BIOS utility.
    Can this HDD be recovered? Is there a utility that can recover it?
    If the answer is no: I connected the HDD back into the laptop, and set the boot sequence to DVD drive. I inserted the "All-In-One Recovery DVDs" for this laptop, but they didn't boot. Aren't the recovery DVDs bootable?
    Your help and suggestions will be greatly appreciated.
    Sincerely,
    Richard

    It looks like this unit came with Windows XP. It really depends on when in XP's production cycle the unit was released on how recovery works.
    I am afraid the HDD is beyond salavaging at this point and the hard drive will need to be replaced. The recovery more than likely will fail on the bad HDD.
    Early units came with recovery disks, one of which was labeled Operating System, and some used the F10 recovery and required making the recovery disks using a program (these units did not come with disks).
    Is there a disk labeled as Operating System or Disk 1 of X?
    If it is Disk 1 of X, then you would start with it, but start with Operating System if there is one labeled that.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Unable to insert dvd in drive

    unable to insert dvd in drive

    some 2 weeks ago, someone in this forum was making desperate efforts to insert the optical support, could not do it, at last opened the rascal and found an x-dollar coin in it. Check whether the same there. If not a coin, perhaps another disk. what happens if you press the Eject disk key on your keyboard, I assume there is one on that generation.

  • Pavilion dv8 cannot play cd or dvd

    I have a Pavilion DV8 ( Model NQ226AV) laptop with a cd/dvd/bluray drive ( BD MLT UJ240) that cannot read any media. It spins and spins and does nothing.  I disabled the drivers and reboot and windows reenabled the drivers. I tried to read the disk from command line and shows no media.  Help

    Try booting from it using a bootable disk like a Windows install disk or your recovery media. This will isolate whether it is hardware (no boot) or a software/Windows problem. You might also try a laser cleaner disk you can buy at any electronics store. If it will not boot and cleaning does not good it will be necessary to replace the drive. Are you  under warranty? If so, obviously HP will replace it and if not figure the drive would cost around $100 on the internet and is very easy to repace.

  • I have an HP Pavilion g6 laptop, and am trying to set up my recovery discs. I get an error message

    I have an HP Pavilion g6 laptop, and am trying to set up my recovery discs.  I get an error message that states "inserted media not supported".  I am using CD-R Music discs.  Is the problem "Music" ?  Will it not recognize a blank music disc?

    Hi,
    Yes, it is the discs that are the problem - you will need to use good quality DVD+R or DVD-R discs.  See the section under the sub-heading 'Create a set of operating system Recovery Discs' on the link below.
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01895783
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Hi, I have a HP pavilion dv4 laptop computer. My E:\ CDDVDW TS-L633M cd drive has stopped working

    Hi I have a HP Pavilion Dv4 laptop computer. My E:\ CDDVDW TS-L633M cd drive has stopped working. When I insert a new CD or an exiting cd into the cd drive, the computer displays a message to insert a cd into the drive. i Know that the cd that I'm inserting into the drive should be readable, but the computer doesn't recognize it. When I run the HP support assistant, and choose the HP Optical Disc Drive Check, I get the message "Insert media in : E:\ hp CDDVDW TS-L633M
    If you want to do write testing, insert blank writeable media, Otherwise, read-only testing will be performed. When I insert a  disk with a program that I want to install on the computer into the cd drive and click the next button, I get a window that says:
    "Media Identification:
      Wait while the media is being Identified."
     Then another window is displayed with the message:
    "Media Identification
      No disc has been detected."
    But I know that the disk is formatted correctly for my cd reader to recognize it.
    Please Help,
      -Ron

    Hi Ron,
    First, try the automated fixit from Microsoft on the link below.
    Windows 7
    Vista
    Check if the drive is now working.
    If the drive is not working, click the Start Menu, open the Control Panel and click on Device Manager.  Next click to open DVD/CD-ROM Drives.  Right click the drive and select uninstall.  Do not delete drivers if asked.  When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ).  Let windows reinstall the drive and see if it now works.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HELP! Unable to eject from ipod classic 80m

    I am unable to eject my ipod. I had to reload itunes, sync and now I get the error "cannot eject ipod because it contains files that are in use by another application

    If the external drive doesn't show up then you have a problem. Try unplugging the drive then replugging it. See if the drive is recognized (and possibly the disc in it.) If the drive is functional:
    Five ways to eject a stuck CD or DVD from the optical drive
    Ejecting the stuck disc can usually be done in one of the following ways:
    1. Restart the computer and after the chime press and hold down the left mouse button until the disc ejects.
    2. Press the Eject button on your keyboard.
    3. Click on the Eject button in the menubar.
    4. Press COMMAND-E.
    5. If none of the above work try this: Open the Terminal application in your Utilities folder. At the prompt enter or paste the following:
         /usr/bin/drutil eject
    If this fails then try this:
    Boot the computer into single-user mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.

  • Unable to burn dvds

    I am unable to burn dvds. I'm attempting to backup my iphoto library. When I drag and drop I get an alias icon on the dvd, it does not copy. When I go ahead and try and burn, the disk is ejected and i get them message, "an error has occured" This is my first attempt at burning a dvd.
    Do I need additional software?

    Do you use PLUS or MINUS media?
    Take a look at system profiler whether your drive is capable of writing the format you have chosen.

Maybe you are looking for

  • Screen frozen on system message

    My two day old i-pad mini screen is frozen with the message:  Not enough storge I am unable to slide to unlock the screen.

  • Crystal Reports Server XI On-demand Subreport does not open

    Hi, I'm using Crystal Reports XI and have a report with two on-demand subreports. In Crystal Designer, both work fine - that is when I click on either on-demand subreport in preview, it opens in another tab. But in Crystal Reports Server, one subrepo

  • Extended Display : Clarification needed

    My Radeon 9000 should allow me with my G4/X10.3.9 system, to accept another LCD monitor. What I would like to know, is what am I expected to see in System Preferences < Displays. Or in System Profiler. Hope it is not a silly question.

  • IPhoto Organisation query

    Hi all I have an iMac with iPhoto version 9.5.1. on it. After downloading photos I am never sure if I should put them in Events, Albums or just leave under photos. Things get pretty messed up when I am editing or deleting photos as if you carry out t

  • Reports with OAS

    Hi I have installed OAS with report services. I want to test one report with OAS. What changes do I need to make in OAS. Iam going thur the manual -- Oracle® Application Server Reports Services Publishing Reports to the Web Pls let me know if you hav