Pavilion dv4 3138tx drivers after reinstallation of plain windows 7 home premium

My Pavilion DV4 3138tx notebook recovery disk was crashed, and HP did not give recovery disk when it was purchased. I have to download the windows 7 home premium edition from "mydigitallife.info" website to download the legalized windows 7 reinstallation image. After installation, OS is working, but many drivers seem not working, e.g. ethernet network controller. I tried to download the driver from official HP website for model 3138tx, which is realtek LAN network driver, but after installation, it says "xxx files not found", any way, it is not working, and HP support told me they can not help me, asked me to go for realtek..... I looked up the network controller hardware ID, it is  PCI/VEN10EC DEV8168SUBSYS..@$%&^*(&^ , I looked up in google, it is realtek chip for 10/100/1000 gigabit LAN network card. Very strange, anyone can help me?
As per HP advice, I also tried to reinstall chipset driver, which is listed on official HP website for drivers of 3138tx model, it doesn't help either. My laptop was purchased in Malaysia with origial windows 7 home premium edition in English, with product key at bottom of the machine.
This question was solved.
View Solution.

foreignmouse
You find the new Realtek driver her
And the driver support for this HP DV4 3138tx her.
Say thanks by clicking the "Kudos! Star" which is on the left.
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Similar Messages

  • Missing drivers after fresh installation of window 7 the base system device missing.

    missing driver on  HP pavilion dv4 the base system device drive,as a result of these i cant access sound on system.

    Hi:
    The base system device is most likely your card reader.
    Missing audio is related to something else.
    On the bottom of your PC on the sticker with the serial number, please post your p/n.
    That will identify the specific model of your dv4 and I can send you the link to the drivers.
    The p/n should be arranged similar to this:  AF846AW#ABA
    Paul

  • Pavilion dv5020ca sound will not work after updating xp to vista home premium

    HP Pavilion Dv5020ca   windows vista home premium
    After upgrading from xp to vista the drivers for my sound card will not install and the error message i recieved was
    cannot find media any help would be apperciated
    This question was solved.
    View Solution.

    Hi:
    See if installing the XP audio driver works...
    Download and run this driver.  If it automatically installs the audio, great.  If not...close out of any error windows.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-42513-1&cc=us&dlc=en&lc=en&...
    Go to the device manager and click on the multimedia audio controller needing drivers.
    Click on the driver tab.  Click on update driver.  Select the Browse my computer for driver software option and at the bottom of that window, select the Let me pick from a list of device drivers on my computer.
    The select Have Disk and browse to: C:\SWSetup\sp33443\CPL30A5a and select the Conexant High Definition Audio from the list and see if the driver installs.
    Then reboot.

  • S205 w/ Windows Home Premium not recognizing Integrated WebCam - Windows 7 Drivers?

    I just got an awesome deal on an S205 netbook. Everything is great except that I cannot get the WebCam to work. This is a deal breaker. If I can't figure it out I'll be returning it.
    So far I have tried various things. When I first started this I couldn't figure things out. There was no camera in the Device Manager and nothing obvious on the system (hardware, software) about a camera, except that I can see it, physically on the netbook and know it came with a WebCam. How to use it? Nada. So I went to the Lenovo site & installed a driver and then Skype. The microphone works in Skype, but no picture. Totally black. However, it automatically brings up Lenovo YouCam when you test the video in Skype. So that helped as this software was not recognizing a camera either, so I knew it wasn't just Skype.
    Then I figured out that I needed to hit Fn+Esc to enable the webcam. I thought that was the ticket. However, as soon as I did that I got a message that the USB device was not recognized. I uninstalled the driver and went back to reinstall it to see if that might help, however at this time I realized that the driver's on Lenovo's site for the s205 are for XP not Windows 7. Seriously? Turns out there are two different sites. http://support.lenovo.com and http://consumersupport.lenovo.com The later has the Windows 7 version, the first site lists Xp drivers ... Installed the W7 Driver again, but still not working or recognizing the camera ... Anyway, I am not a techie, but I am pretty decent at figuring stuff out or Googling and researching this stuff online. Or following your directions/suggestions. From my searching so far no one seems to have this exact issue. Most it is either not having software to use the camera or not having it enabled and neither of these are my issue. Any ideas for what my next step should be? Details on my system below. Thanks!
    Lenonvo ideaPad - 11.6" 1366x768 LED; AMD Dual-Core E-350 1.6GHz; 4GB RAM; 500GB HDD; 802.11n; Windows 7 Home Premium; ATI Radeon HD6310M graphics; webcam; 6-cell battery
    Solved!
    Go to Solution.

    I've had some webcam issues, too.
    Sadly, the webcam device ID is not listed in the driver available for download at the support page.
    Thus, installing this driver is pointless.
    Nevertheless, you can force the driver installation and it will work as it should.
    Please have a look at the device manager.
    Double-click the unknown device, go to Details and select the Hardware ID property.
    It should be USB\VID_5986&PID_0292&REV_1403&MI_00
    (In case you got a different VendorID/ProductID, google them. You should quickly find something. Be sure this device is the webcam and not some other device. Otherwise don't continue.)
    Now unpack the driver setup file with 7-zip or WinRaR.
    Back to the Device Manager -> Double-click the device, select the Driver tab, click Update Driver and browse for the extracted folder. You will need the Bison subfolder.
    Good luck.

  • WT8-A32 missisng drivers after clean install of Windows 10

    Hi, I wanted to do a full clean install of Windows 10 in my Encore WT8.So I first upgraded it to Windows 10 and then runned the installation via a USB Pen. During the installation I missed the touch screen. but I used and external Keybord+Mouse to carry on.The issue was that after finishing the installation I missed a lot of drivers. Touch, audio, ...If I try to update them via Device Manager it simply state that there are no drivers available  Did anywone made a sucessfull clean install of the Win 10 in the Encore WT8-A32?Anyway of getting the drivers to be installed on a clean install of Windows 10?  I tired to install some drivers from the 8.1 version but it complained it was not compatible. Thanks 

      During the installation I missed the touch screen. but I used and external Keybord+Mouse to carry on.The issue was that after finishing the installation I missed a lot of drivers. Touch, audio, ...If I try to update them via Device Manager it simply state that there are no drivers available  Did anywone made a sucessfull clean install of the Win 10 in the Encore WT8-A32?Anyway of getting the drivers to be installed on a clean install of Windows 10?  I tired to install some drivers from the 8.1 version but it complained it was not compatible. My notes about a clean install are in another thread, but you have done 99% of what you need.Just grab the 'intel platform installer' and run it. This will give you a functioning touch screen.The version I used was win8.1 vintage and works without a problem.

  • USB ports no drivers after re-install of windows

    Had to re-install windows because of some ransomware issues.  Everything has gone well except for drivers for the left usb ports and sm bus controller.  I have searched the HP website for the drivers but none can be found.  The usb ports on the right side work fine but not the left.  When looking in device manager they are missing drivers.  I have tried about everything i can think of to resolve the issue with no success.  Any help would be appreciated.  Thanks
    Machine is
    HP pavillion dv7-6b57nr
    This question was solved.
    View Solution.

    Hi:
    You need to install the AMD chipset drivers from the link below which will install the smbus controller and usb 3 controllers.
    You want the first file listed on the webpage.
    http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064

  • I have a problem with my pavilion dv4-2045dx dvd/cd rom drive for windows 7 64-bit

    I can play CD's and watch dvd movies fine.  The drive have no problem reading cd and DVD's.  My problem is with cd-rom and blank CD's and DVD's.  I can't burn anything.  For some reason, it won't read any cd-rom disks.  This has never been a problem before.  I tried the idea about the upper and lower filters but when I searched, I didn't see any upper or lower filters.  I tried the microsoft fix it and nothing was wrong.  I looked at the device manager and it shows no problem at all.  What should I do next?

    Hi, did you say this issue just started?
    If so have you tried a system restore back to date when it was working?
    Here is a link to a document on running a system restore...this is not like a recovery, it won't wipe out all your data
    .http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00807369&cc=us&dlc=en&lc=en#N315
    Just click on the heading for "Returning the computer to a previous restore point"
    I am an HP employee
    Knowledge is power...Power to the people

  • Please help me install the beats audio. Mine was lost after installing windows home premium. Thanks.

    Product name: Pavilion dm1-4000au
    Product number: QG411PA
    This question was solved.
    View Solution.

    Hi,
    Download and install the IDT driver on the link below - this should also install the Beats Audio interface.
    http://ftp.hp.com/pub/softpaq/sp54001-54500/sp5423​6.exe
    After the installation has completed, restart the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Graphic accelerator reinstall? Product name: HP Pavilion dv4 Notebook PC

    Product name: HP Pavilion dv4 Notebook PC
    Product number: WA696UA#ABA
    Windows 7 Home Premium 64-bit Service Pack 1
    I uninstalled my Graphics in control panel/devise manager
    My genius friend told me it would reinstall automatically when I restart....it did not.
    I would like some assistance reinstalling.
    Thanks in advance
    This question was solved.
    View Solution.

    Hi:
    Sometimes it does, and sometimes it doesn't.
    Based on the product specs for your notebook, here is the link to the graphics driver you need to reinstall...
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-79613-2&cc=us&dlc=en&lc=en&...

  • Why wont my HP All In One C5280 printer print from photo tray after upgrade- vista to windows 7?

    I recently downloaded an upgrade for windows home premium. Used to have Vista. Now my HP C5280 All In One printer will not print from the photo tray when settings are correctly set. This is after I ran HP Update. What do I do next.

    I would try running the HP Print Diagnostic Utility. Go to http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=mp-91788-1&lc=en&dlc=en&cc=us&​...= and see what part fails.
    The PDU checks the connectivity, spooler condition, online status, device manager, print queue, ports, driver, conflicts, and default printer. 
    Although I am an HP employee, I am speaking for myself and not for HP.
    If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

  • Laptop HP Pavilion dv4 after Restore to Factory Defaullt then not restart to windows, no error msg

    Dear All,
    I am using HP Laptop HP Pavilion dv4-1135ee,
    Laptop for last more than 5-years is working, but now quite slow
    So I went  for Factroy restore,  search in google for this help, found one easier way to restore is go to "my computer" right click, then select 'manage|", then   to "disk managment" and make active "restore backup partition" and then restart the laptop.
    Now Restore start automatically, without pressing F11-Key, I click yes for "Factory restore", continue next, twice laptop restart, then now again ragain laptop keep on restarting  and show "windows Booting File", then one popup " Xwindows|systen32|cmd.exe     -  Startnet.cmd, then automatically popup close and Laptop restart, their is no error msg or failure.
    How to resolve this problem
    Thanks
    SAEED
    after Restore to Factory Defaullt , then not restart to windows and no error msg

    Enter BIOS setup by tapping/holding the F10 key immediately after powering on the laptop.Use Diagnostics to test your hard drive and memory.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Touchpad doesn't work - HP Pavilion DV4 - 2120ca

    Re: Pavilion DV4-2120ca
    Touchpad doesn't work after cleaning out the dust collection in the fan, heat sink area.  New Therma paste was applied.  
    Both the keyboard & touchpad were the 2 things that didn't work following reassembly.  The keyboard didn't work but able to use USB wireless mouse.  Couple days ago the replacement battery finally arrived, installed and charged for 12 hours.  After restart, the keyboard works as it should. 
    Unfortunately, touchpad still doesn't work. The light switch above the touchpad works, clicking on it turns white & amber but any movement scrolling doesn't work.
    We tried the following, but unsuccessful
    double tapping top left corner
    Hard Reset 
    Uninstalled ALPS & Synaptics -- reinstalled , restarted
    Updated Windows, HP, BIOS, Drivers
    Don't recall during reassembly if touchpad has a cable or connector.  If so, perhaps worth try to disconnect & reconnect to ensure correct connection.
    What do u advise to try next?
    Thank u
    ~ Gayle ~

    Did you connect the ribbon cable for the Touchpad. Often times there is one for the keyboard and one for the touchpad separately. Hopefully you have not damaged the ribbon cable. Just make sure you push it all the way in and seat it properly.
    **Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    **Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Graphics/Video Problems on HP Pavilion dv4-1155se

    We have a brand spanking new HP Pavilion dv4-1155se running Windows Vista 64-bit Edition that continues to have issues.  At random times, the laptop display will flicker 2 or 3 times, and the laptop will blue screen, stating a problem with the graphics adapter.  We've updated the BIOS and graphics drivers from HP to no avail.  We've also donwloaded a driver directly from ATI which seemed to resolve the issue for an extended period, but has re-occured today.
    The only thing I can think of is that Vista may be using a built-in driver for the graphics adapter which is no good.  I'm considering the possibility that even though I updated the graphics with a driver directly from ATI, Vista overwrote it with its own again.  The laptop is currently off-site so I cannot verify this, but if anyone has had similar issues I'd like to see if you were able to find a fix.
    Regards,
    Phil

    Do you also get this error (in addition to the BSOSs): "Display driver nvlddmkm stopped responding and has successfully recovered"
    I started receiving the flickering screen and then the nvlddmkm error problem after I downloaded:
    Realtek - Network - Realtek RTL8168B/8111B Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
    Installation date: ‎11/‎8/‎2008 3:20 PM
    Installation status: Successful
    Update type: Optional
    DriverUpdate: Realtek Network software update released in July, 2008
    And:
    Device Driver Package Install: HP Developmen...
    I have a NVIDIA GPU and since you have ATI our similar errors may just be coincidental and/or a result of Windows Update.
    I do not know how the Realtek d/l would conflict with the GPU and I also updated HP Heath Check and HP Quick Play and HP Quick Launch Buttons just before Realtek.  I keep 'Print Screen' shots of my System Restore page to document the chronology of my updates and software installs.  Then through Problem Reports and Solutions, which displays the exact time of the "video hardware error", I was able to associate the aforementioned 3 recent updates as potential problems.
    Many dv9000 computers (and more) are experiencing the video display problems I am and their complete computer failures occur soon after receiving those video warnings. 
    Therefore, as you noted, your problem or mine might be as innocuous as an updated driver conflict from Windows Update or an HP driver update.
    Message Edited by RonKe on 11-20-2008 12:31 PM
    Sig: Pavilion Model Series# dv9500t (t=Intel)_CTO_Prod# RL653AV_Vista Ultimate (64-bit)_SP1_Intel 2 Duo CPU T7500_2 GB Ram_BIOS F.09_NVIDIA 8600M GS_200GB 7200RPM SATA Dual HD (100GBx2)_HP 300GB HD USB Kit for xb3000_8/2007

  • Pavilion dv4-1275mx notebook - once-flashing leds @ caps lock and scroll keys @ start-up

    My HP Pavilion dv4-1275mx notebook runs Windows Vista Home Premium service pack 1 for 64x-based systems.  
    Recently, when I turn it on, the led lights @ the caps lock and scroll keys repeatedly flash once.
    I'm not sure what, if anything, happened prior to this starting.  It's possible that there was a power surge when it was shut off, or it may be related to doing a McAfee virus scan or installing the latest version of a software, e.g., Adobe Reader.
    I was able to use my System Recovery disks to reinstall the Vista software, thinking this might "kickstart" my computer into working, e.g., as part of the restart process.  After the reinstallation, I was able to use my computer, although the led lights continued to flash.  However, once I shut down my computer, I have been unable to restart it.  The leds continue to flash upon start-up, and I have not been successful in again reinstalling the Vista software.  (I thought if could get my computer to work again that way, it might stay accessible if I used hiberate mode instead of shutting it down.)
    The computer's about 4-1/2 years old.  The screen has a short of some kind (only turning on when the screen is low to the keyboard, so I use an external monitor. 

    Try the steps in the following weblink:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00372748
    If the issue persists, please read the following document, understand the LED blink code, identify the root cause and try troubleshooting appropriately:
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCach...
    I am an HP employee.
    Regards,
    Vidya
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

  • No sound when using HDMI to Vizio TV. HP Pavilion dv4-4310us

    I just bought a Vizio HDTV and connected to my HP Pavilion dv4-4310us Entertainment Notebook.  I have it connected through the HDMI output on the laptop and get great picture, but no sound! I have scoured the forums for Win 7, and here on HP's site...tried a few things but it seems I'm having a different problem than others.  Other people have posted that they had sound before and now have no sound.  This is my first time using the HDMI output to a TV... I'm running Win 7 Professional, the Audio is IDT, and I have all updated drivers for the Intel 4 Chipset, and the IDT Audio CODEC.  I'm hoping someone can help with this!  It's very frustrating.  Thank you in advance.
    Michele

    Yeah. It kind of *****! But it is true, HDMI does not transmit sound, just video. Which it does well I must say.
    What I did is I have surround sound and I plugged a cord that has male connectors on both sides and I plugged it into my amp on one side and my mcbook on the other, so now I can get sound onto my surround sound and also get the video images on my HDTV. =) If you have a surround sound system with an amp, I would recomend doing this. Its easiest.

Maybe you are looking for