Pavilion DV4 : After upgrade to Windows 7, fingerprint doesnt work

Hi,
I upgraded to windows 7 yesterday using HP Windows upgrade kit.
Everything is working fine except for Digital Persona. It say reader not connected. I had downloaded it from HP site.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-72110-1&lc=en&dlc=en&cc=in&...
However, If i download the demo application from validityInc, that works fine (it detects the reader)
What should i do to make this digital persona work?
Regards
Ajay

Hi all
Thank you for your post: I will be elated to assist you!
Is your windows 7, 32 bit or 64 bit? The link provided above, is for 32 bit. Here is a link to the HP software and driver page for your computer click here. This has all of HP's software and drivers for this model. I am sending you a link to "Downloading and Updating Software and Drivers for HP Computers" click here.
You can try running MS Fix it click here, aid in this endeavor. I hope this is helpful.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

Touchsmart 600 1390 - issue after upgrade to Windows 8 - DVDBD wont work.

I successfully upgraded to Windows 8 and although the harddisk ran non stop for about a week, with me dubbing 8 - WindowsWait... It eventually finished whatever it thought it was doing and is about normal now.
EXCEPT the DVDBD that is onboard now can not read any media. I have uninstalled and reinstalled the Windows driver several times but without any resolution. I have searched the HP website but there is nothing i have found there - drivers or advice.
Any ideas?

Hello,
You have used the drive to install windows right? Was the unit working before you have done the upgrade?
Optical drives should not give any problem after an upgrade, other components you might not get a driver due to manufacturer not releasing it, but not the optical drive...
Make sure you have your windows activated and you have all windows updates already installed...
How is the optical drive detected in windows explorer and device manager? Can you tell me how the drive is detected?
Thanks,
I work for HP! Please remember to provide and if this helped click ON

Acer Aspire V7-582PG very slow after upgrade to Windows 10 - ExpressCache not working

Upgrade my Acer Aspire V7-582PG to Windows 10. Startup and main windows events are very slow. The caching SSD is not used at all. I checked and I noticed that the ExpressCache software is removed during the upgrade to Windows 10. The folder "C:\Program Files\Condusiv Technologies\" is empty and the background service is gone. Tried to reïnstall an old version of the ExpressCache software (1.0.94), but Windows 10 is actively blocking this software and won't let me install this. Anyone have this working? Or contacted Acer Support about this problem?

Hi IronFly Thanks for your assistance, sadly this is one of the earlier solutions I have tried, however - still not working. ExpressCache does install with this particular installer - however, running 'ECCmd.exe -info' in admin command prompt gives me a result: Microsoft Windows [Version 10.0.10240]
(c) 2015 Microsoft Corporation. All rights reserved.C:\Windows\system32>eccmd.exe -info
ExpressCache Command Version 1.0.98.0
Copyright® 2010-2012 Condusiv Technologies.
Date Time: 8/4/2015 18:21:20:278 (REDACTED-PC #0)ExpressCache Driver is not installed.
**ERROR** ECCmd exited with error 0x1 (1) Really starting to struggle with this now. As I see it I need the following programmes installed to go ahead: IRST (Intel Rapid Storage Technology)ExpressCacheIntel Rapid Start Technology It seems Acer have dropped the ball on this one, with other manufactures already aware of the issue, and providing solutions. Acer do not seem to be aware, I have submitted a support ticket here in the UK, and I am really hoping I have missed something and they have a fix or workaround already. This is quite poor on Acer's part - I have always enjoyed their products, and been loyal to Acer, however this is starting to make me question whether they are just a tech vendor rather than LTS provider too!

Keyboard wireless key not working after upgrading to windows 8.1

Hello,
I am having hp pavilion dv6-6165tx notebook, where keyboard having a wireless button that turns ON and OFF all wireless devices, After upgrading to windows 8.1, HP Connection Manager is not getting installed, as well as Key is not working, key color turns red and white but no action is performed.
Kindly suggest me some solution.
Note: HP Doesn't provide drivers for windows 8/8.1 ONLY WINDOWS 7 for hp pavilion dv6-6165tx.
Thanks.

Hi @Jayesh_Bhadja ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6165tx Notebook and the Wireless keyboard not working correctly. Here is a link to troubleshoot the keyboard.
The HP Connection Manager is something that is for Windows 7 not Windows 8.1. I would uninstall this from your Notebook. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. It has a troubleshooting tool in this.
Make sure all your updates have been completed. I would try restarting my Notebook a few times.
If that does not help I would uninstall the keyboard from the Device manager.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Bluetooth Not Working after upgrading to Windows 8.1

My Laptop is HP Pavilion G6 2015 tx after upgrade to windows 8.1, bluetooth is not working also the battery drain has increased anyone know a fix atleast for bluetooth problem ???

You're very welcome.
That is very interesting, because I didn't know of anyone who upgraded to W8.0 with a Ralink wireless card with the BT 3.0 radio that got the BT to work at all.
We tried the W7 drivers, and they didn't work.
That is why you don't see a W8 Ralink BT driver for the bluetooth on your PC's support and driver page amongst the other 11 drivers listed.
The Ralink 3.0 version of BT is not supported in W8.
While somehow the BT has worked in W8 for you, I'm afraid your luck has run out.
Unless by some fluke, HP installed a card with the BT 4.0 radio on your model...
You can try this W8 driver for the Ralink card with the BT 4.0 radio, but don't get your hopes up.
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229457&sp...

No Audio Output after Upgrading to windows 7; Soundblaster Card is installed

After upgrading to Windows 7 Ultimate (64-bit), I found that my speakers (which are built into my HP w2207 monitor) are not recognized. In the notification area I have the speaker with a red x in it, and it says “No Audio Output Device is installed”.
I have a HP Pavilion D4890Y with the Sound Blaster Audigy X-FI 24-Bit Xtreme sound card. I tried looking in Device Manager, and found “Multimedia Audio Controller” under Other, which states no drivers could be found.
I tried following some of the advice online, and downloaded the latest Realtek High Definition Audio drivers, but and the download seems to run successfully, but I don’t notice any differences. When I reboot as prompted, I’ve still got the same error.
I then tried forcing the Audio Device to use a Realtek driver, but Windows protests (saying it’s not sure it’s compatable with my device, and I end up with “Realtek High Definition Audio” under “Sound, video and game controllers”, but it has a yellow exclamation point. If I click properties, the device status says “This device cannot start (Code 10).” If I try to update the driver I get the message that it cannot find the driver software.   If I uninstall the driver I’m back to the original problem (multimedia audio controller under original devices, with no known drivers).
I also tried downloading various files from the Creative site, but it’s not clear which one to use, and the 4 or 5 different ones I tried (including their recommended beta version for Windows 7), when each of them opens it says it can’t find any supported devices.
Suggestions? Thanks!
This question was solved.
View Solution.

Hi,
"If the driver is a previous revision install it using the TROUBLESHOOT COMPATIBILITY tool that is part of the Windows 7 OS.
To use the tool, uninstall any drivers for the sound card you show listed in Control Panel/Programs/Uninstall Programs  list.  Delete the Device from Device Manager.
Download the revision of the driver from www.creative.com  website to a folder you've created and placed on your desktop.
After the driver is downloaded, navigate to the "setup.exe" of the driver and Right Click - select Troubleshoot Compatibility  ----
Let the compatibility tool select a possible solution then use its suggestion of TRY RECOMMENDED WINDOWS SETTINGS, if it does not find a solution it will submit only CUSTOMIZE SETTINGS and let you install it as you designate."
The preceding information comes from a Microsoft Windows 7 forum regarding an issue similar to yours.
the information you provided did verify that it is a sound blaster XiFi Extreme card as checked against the Vendor / Device list.
regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Internal Microphone inop, after upgrading to Windows 10

I have two HP Pavilion 11 x360 PCs, after upgrading to windows 10, both internal microhones do not work. I have tried using a bluthooth headset, (audio works) but the microphone does not. I have tried upgrading the soundcard driver using the Realtek High Definition Audio Driver ( Realtek Semiconductor Corp. - 6.0.1.7564) found on HP's driver website and is still will not work.

Rolled back one of the PCs to Win 8.1 and am in the process of updating the drivers, thus far the microphone still does not work.

Cannot print a PDF file after upgrading to Windows 8.1

Cannot print a PDF file after upgrading to Windows 8.1
I can print anything else from either the Desktop or Start but not a PDF. No error message but just does not print.
Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

Cannot print a PDF file after upgrading to Windows 8.1
I can print anything else from either the Desktop or Start but not a PDF. No error message but just does not print.
Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

After upgrading to windows 8, spectre 14 usb3 slow

are there any usb3 fast drivers for spectre 14 after upgrading to windows 8, the drivers of windows 7 there are not compatible with windows 8

Hello rumbacha. I understand you're trying to locate some drivers for your SPECTRE for Windows 8.
There are quite a few versions of the SPECTRE so I will need your product number to identify exactly which model you have. This document can show you where the product number is located.
Once I have this I will attempt to locate the drivers for you.
Have an excellent day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

After upgrading to Windows 8.1 firefox longer works. I got it to load but screen is either blank or doesn't go to target address

after upgrading to Windows 8.1 from 8 nothing works correctly. Firefox 1st received 'unable to load XPcom' After resetting and uninstalling several times Firefox now loads to either a support screen or blank screen. It accepts address input but doesn't execute to target. So far I have been unable to roll back upgrade.
Although IE11 works, it doesn't work correctly.

It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
If you keep having problems then do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 24: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

After upgrade to Windows 8.1, ipod nano 7th gen not recognized

/after upgrading to Windows 8.1, ITunes does not recognize my ipod nano 7th gen. I have uninstalled and reinstalled ITunes but no luck. I have gone through all steps in troubleshooting, but it still doesn't recognize it. Help!

Hi cindywindy,
If your iPod Nano is no longer recognized in iTunes after a recent system upgrade, you may find the following article helpful (apologies if you have already seen it):
Apple Support: iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Regards,
- Brenden

Problems with your HP printer after upgrading to Windows 8.1

If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
www.hp.com/go/tools.
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions work just fine.
I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

Can't print in PSE11 after upgrading to windows 8.1

I have just upgraded from Windows8 to 8.1 and now can't print in PSE11. For some reason can in PSE7

I can print from other programs but not PSE. I have updated the drivers. I have attached 3 screen shots with error messages.
Tracy Ferreira 2607 Woodruff Rd.
Suite E-126
Simpsonville, SC 29681(864)350-4724www.onthespotportraits.com
From: hatstead <[email protected]>
To: Tracy Ferreira <[email protected]>
Sent: Tuesday, March 10, 2015 1:58 PM
Subject: can't print in PSE11 after upgrading to windows 8.1
can't print in PSE11 after upgrading to windows 8.1
created by hatstead in Photoshop Elements - View the full discussionWhat happens when you try?Any error messages?Do you have the latest drivers for the printer? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7274523#7274523 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7274523#7274523 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Ethernet LAN not working after upgrading to windows 8.1

After upgrading from Windows 8 to 8.1, my Ethernet LAN is no longer working. Wireless LAN connectivity is OK. I have run the HP Support Assistant and downloaded the drivers for 8.1. Hovever, I do not see a 8.1 driver listed for the Ethernet LAN.

You're very welcome. See if the recovery manager still works so you can roll back to W8. Please read this guide for how to use it. http://support.hp.com/us-en/document/c03489643 If it doesn't then you will have to order a set of recovery disks from HP, or you can install this plain W8 OEM software this guy has posted on a link. Lots of folks have used it successfully, which is why I posted it. https://docs.google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?pli=1 Then use this tool to make the iso file bootable to a DVD or 4+ GB USB flash drive. http://www.microsoft.com/en-us/download/windows-usb-dvd-download-tool Yes, that really stinks why you and I could not upgrade without an issue. I disabled about 5 or 6 devices in the device manager and the code 12 would not go away. I have no clue why the PC works fine on W8 but not on W8.1. My notebook is a few years older than yours and it worked fine on W8.1 but not on W10. Go figure...

Wifi problem of G560 after upgrading to windows 8.1

Hi,
I have a lenovo G560. After upgrading from windows 8 to windows 8.1, I cannot connect to wifi. I was wondering if someon else has the same problem.

hi amardoukhi,
Welcome to the Forums.
Your issue might be similar to this thread. Try the solution that was posted to rollback to an older driver version.
The solution was to:
1. Open Device Manager (press WInkey+R > type devmgmt.msc)
2. On the Device Manager, navigate to Network Adapters > right click on the wireless adapter and choose Update Driver Software
   - Link to picture
3. On the Driver Update Window, choose Browse my computer for driver software > Let me pick from a list of device drivers on my computer and choose the wireless card on the list.
   - Link to picture
   - Link to picture
   - Link to picture
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Pavilion DV4 : After upgrade to Windows 7, fingerprint doesnt work

Similar Messages

Maybe you are looking for