Pavilion dv5. Bluetooth will connect but can't hear audio from bluetooth headphones.

They would work a few days ago, now they just connect and don't play audio.  I am running windows 7.
Thanks for your help.

Hello lg41s,
You not able to here sound from your head phones.
With sound it could be a lot of different things.
Here is a link that will walk you through some troubleshooting steps for the audio.
Your easiest fix since everything was working before the driver update is a System Restore.
This will take the system back to when everything was working correctly without affecting your personal files.
Here is a link on how to restore.
Clicking the White Kudos star on the left is a way to say Thanks!
Let me know how everything goes.
Have a good day.

Similar Messages

  • HT1386 Syncing works but can't hear audio with headphones.

    Syncing works but can't hear audio with headphones.  Works without headphones though.

    Have you tried other headphones?
    What does syncing have to do with the problem?
    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price

  • My iphone 5 ATT, i can hear the recording, but can not hear anything from neither ear speaker or loud speaker when i call? what is the problem? what can i do, it is out of warranty.

    My iphone 5 ATT, i can hear the recording, but can not hear anything from neither ear speaker or loud speaker when i call? what is the problem? what can i do, it is out of warranty.

    1357b wrote:
    My iphone 5 ATT, i can hear the recording
    What recording?
    but can not hear anything from neither ear speaker or loud speaker when i call?
    You just wrote you could hear the recording...
    You can take it into an Apple store and have it checked out.

  • Sent an video via text but can only hear audio. why can't see the video?

    i was sent a video through text but cannot see it. i can only hear the audio. why?

    maybe it was sent in a format that cannot be read by the iPhone.

  • Can't hear audio from handheld mic recording

    I can hear interviews I recorded with a handheld mic on videos edited in iMovie and uploaded to YouTube only if I access YouTube via a brower such as Safari and Puffin and only if I use my new third generation iPad or an iMac or PC.
    If I try to access the videos via YouTube's app on my new iPad, I can hear the nat sound recorded with the video camera but I can't hear the interviews recorded with a handheld mic.
    I can't hear the interviews recorded with a handheld mic on my iPhone 4 through YouTube's app or via a browser.
    I wasn't having any problem three weeks ago.  This just started last week.
    What is causing this problem?  Is there a workaround or solution?

    You're connected to the line-in on the Mac? So set to Line-In or Built-In
    http://www.bulletsandbones.com/GB/FAQPages/RecordLineIn.html

  • I can't hear music from my headphones

    I can hear music from my speakers (Ipod 4th gen) but when I plug my headphones I can't hear anything and I tried with other headphones and its not the headphones the problem.

    No nothing. I have not dropped the phone or anything, but when I bought it I could listen to music, and now it just don't recognize any headphones!

  • TS1630 Does anyone else have a problem where you can't hear anything from your headphones when you plug them in and they play from the speakers? I checked the jack and there was nothing in it so I don't know what to do....

    I tried to listen to my music from my headphones and when I plugged the headphones into the jack, and pressed play, the music came out through the speakers. I don't know why that happened but I've never been able to get sound through my headphones.

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Green screen on videos, but can still hear audio

    I just got this laptop today as a christmas present, i was watching netflix via the windows app and the screen urned green the audio still plays but the pictue is green i tried netflix via internet explorer and youtube but everything i use has the same problem its a brand new comp there are no updates and i have tried restarting it.
    Product name:HP Pavilion 15 Notebook PC
    Product number:K4D83EA#ABU

    Hi,
    Perform a clean install Flash Player may help:
      http://helpx.adobe.com/flash-player/kb/clean-insta​ll-flash-player.html
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Asf file - can only hear audio, no video...

    i have been given an asf video and have downloaded flip4mac but can only hear audio of iot, no video...
    any idea ?
    thanks a lot in advance

    Some Windows Media formats are not supported on Mac's.
    Check the http://flip4mac.com Site for more answers.

  • Hi, I have tried to use FaceTime using both my Mac and iPhone, it showed it was connecting, but can't not be connected, and it will just show call failed. could you please look into it? thanks

    Hi, I have tried to use FaceTime using both my Mac and iPhone, it showed it was connecting, but can't not be connected, and it will just show call failed. could you please look into it? thanks

    There is an issue with facetime at the moment http://www.idownloadblog.com/2014/04/17/facetime-connectivity-issues-reaching-ma ny-ios-users/

  • HT201210 I had an update message on my phone and I clicked yes to update.  Now the phone has a picture of itunes and usb connection, but can't be used.

    I had an update message on my phone and I clicked yes to update.  Now the phone has a picture of itunes and usb connection, but can't be used.  itunes says I have to restore my phone, but will lose all the data.  Is there anything else I can do? I really don't want to lose all my pictures and other data.

    It's in recovery mode. There is nothing left on the phone at all. If you didn't back it up before you started, your data is gone.
    you have no choice but to restore at this point.

  • Wifi says connected but can't connect to internet, email etc

    my ipad wifi says it's connected but can't get internet, email etc.

    Lincoln82-
    Try unplugging your WiFi router for a few seconds.  Then reset the iPad network.  Go to Settings-General-Reset-Reset Network Settings.  You will need to reconnect to the WiFi.
    Fred

  • I connect my mic with an M-audio mobile pre usb device.  When I try to record, I can see that my voice is recording but can't hear it during playback.

    I connect my mic with an M-audio mobile pre usb device.  When I try to record, I can see that my voice is recording but can't hear it during playback.  I tried different input and output settings but it didn't help.  Any help will be appreciated.

    Hear your microphone or instrument as you play and record (monitoring)
    You can hear, or monitor, input from an instrument or microphone in GarageBand while you play and record. When you turn on monitoring for a track, you hear the musical instrument or microphone connected to the track’s input. Monitoring lets you hear yourself play so that you can hear the part you want to record as well as the rest of the project.
    You can turn on monitoring for a Real Instrument track or Electric Guitartrack from the track’s header, or in the Track Info pane. Electric Guitar tracks always show their monitoring buttons, and you can show monitoring buttons for Real Instrument tracks using a menu command. You can use monitoring with feedback protection to avoid feedback while you play.
    Hide
    To turn on monitoring in the track header:
    Choose Track > “Show Monitoring for Real Instrument Tracks.”Monitor buttons appear in the headers of Real Instrument tracks. On tracks with monitoring turned on, the button lights yellow.
    Click the Monitor button in the header of the track you want to use.
    HideTo turn on monitoring in the Track Info pane:
    Double-click the header of the Real Instrument or Electric Guitar track you want to turn on monitoring for.The Track Info pane opens.
    From the Monitor pop-up menu, choose one of the following:
    Choose Off to turn off monitoring. You can hear your instrument only while you record.
    Choose On to turn on monitoring and protect against feedback.
    Choose On (no feedback protection) to turn on monitoring without feedback protection. If the input level is too high, it may cause feedback (especially if you are using a microphone and listening to your project through your computer speakers).
    For an Electric Guitar track, you can view the Monitor pop-up menu by clicking Edit, and then clicking the back side of the amp. The Monitor pop-up menu appears with the input controls below the stage.
    You should usually turn off monitoring when you are not playing or singing. When monitoring is turned on, your computer can pick up output from your speakers or monitors, causing unwanted feedback. Using headphones rather than speakers to listen to your projects can help eliminate feedback.
    If you select your computer’s built-in microphone as the audio input, in the Audio/MIDI pane of GarageBand preferences, monitoring is turned off for all Electric Guitar tracks to avoid unwanted noise.
    SEE ALSO
    If you don’t hear sound from a Real Instrument 
    Was this page helpful?Send feedback.
    © 2010 Apple Inc. All rights reserved.

  • Extend Wireless Network using a Telstra technicolor Gateway wireless Router to Airpot extreme but Airport will only except join not extend and I can not get a network on the Airpor Extreme ethernet ports but can ping Airport extreme from Technicolor Rout/

    Extend Wireless Network using a Telstra technicolor Gateway wireless Router to Airpot extreme but Airport will only except "join a wireless network (which it does) not "extend a wireless network" (Led turns yellow and I can not get a network working on the Airpor Extreme ethernet ports but can ping Airport extreme from Technicolor Router.
    Airport gets it address DHCP.

    Funny how I can ping the Extreme but the Hard Ethernet ports dont seem to work correctly.
    When the AirPort Extreme is configured to "Join" a wireless network, the Ethernet ports are not enabled.
    Oddly, the AirPort Express has a special feature that will allow it to to "Join" virtually any wireless network.....and the Ethernet port can be enabled. So, an Express would work for your purpose to provide an Ethernet connection to the media player. This assumes that the Express is located where it can receive a strong wireless signal from your main router.
    Note that the Express will not provide any additional wireless coverage when it "Joins".

  • TS3048 wireless keyboard will connect but pairing is unsuccessful

    My brand new wireless keyboard will connect but pairing is unsuccessful. OS X version 10.6.8. Any ideas of what the problem is?

    I'm a bit confused, the keyboard must be first paired in order to connect.  What do you see when you use System Preferences > Bluetooth > click the "+" icon to add a device.
    Regards,
    Captfred

Maybe you are looking for

  • About the performance of using shared variables

    Hi  My system has almost 200 I/O points,I want to the host communicates with PLC using OPC(I had create a OPC I/O Server). If I use shared variables bind to OPC data items, there must be almost 200 shared variables. And my puzzle is that what's the p

  • Need to add shape to array

    I am currently making a game using a 2D array, the game only has little blocks moving around on the screen and my idea was to make a 2D array from these blocks! BUT the api really confuses me with making shapes and looking at the rectangle sections I

  • [3003 + R3299 + RSM340] error messages loading an ODS

    Hello everybody, I'm trying to load an ODS which normally is been loaded w/o any issues via a full InfoPackage I've tried by using the previously created infopackages and the same errors were raised, I tried to create a new IP with the same features.

  • Unacceptable behavior from software protection service

    I was using computer with windows 8.1 and everything shuts down and reboots.  I look at system logs and it states System unexpectedly shut down. Also Computer was improperly shut down.  I go to application and find entry Successfully scheduled Softwa

  • HELP PLEASE. MY GARAGE STOP SOUNDING

    HI. I have used the garage band for first time yesterday. i used a few tracks, some digital from the G.Band and a couple of instruments; voice and guitar. I used a few effects. It worked perfectly. But today when i started it on THE SOUND SIMPLY HAS