Pavilion DV5000 no display 10 short beep after a long beep

My friend have a old HP Pavilion DV5000 laptop, recently it having an issue, when tried to power it on, button LED are glowing, fan is rotating but no display coming and 10 short beep after a long beep can be heard.
Anybody have any idea what could be the issue and what does that beep code mean?

Memory or video (bad motherboard). Try each RAM module separately.

Similar Messages

HP Pavilion a1550e, when I turn it on i get 2 short beeps and 1 long beep.

My computer just stopped working. I turned it off and when I turned it back on, the monitor won't come on and it beeps intermittently - 2 short and 1 long.
This question was solved.
View Solution.

Here are the original specs and configurable options for your HP Pavilion a1550e CTO Desktop Computer. Please indicate all options ordered on your computer as we don't have access to that information. Please see this HP document entitled "Computer Does Not Start and Emits an LED or Beep Code". The short-short-long code appears to indicate that the computer is "Unable to initialize video or video card required but not installed."
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Imac I3 hangs, 3 long beeps, pause, 3 long beeps, etc - requires hard restart to clear

Recently added two 2-Gig memory sticks (now 4 of them). One of the adds does not show mfr or serial number, but does show "OK"
No other changes, but beeps don't stop until reboot.

I think yoy still hve some bad RAM.
The Memory test can really only be trusted if it finds a problem, not if it doesn't find a problem.
Memtest OS X...
http://www.memtestosx.org/joomla/index.php
Rember is a freeware GUI for the memtest ...
http://tech.kateva.org/2005/10/rember-freeware-memory-test-utility.html

One short beep and one 1 beep on hp pavilion media center 8120n

My tower is not booting up when I turn it on. My son took the side off and was going to put more memory in it for me, but in the end he didn't. He put the old memory back in and put the side casing back on. Today, when I turn it on, it has 1 short beep and 1 long beep. It just won't boot up. Can anyone tell me what I need to do to get it back up and running?
This question was solved.
View Solution.

RBurke, welcome to the forum.
The BIOS Beep Code that you are hearing is caused by a memory problem. Here is a guide that will help solve the problem:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=bph07107
You should read the entire page. The beep codes common to HP computers are toward the bottom of the page.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

H57M-ED65 with i5 cpu - added HD and now we get 1 long beep and 2 short beeps

So a friend of mine has a MSI H57M-ED65 that he added a 2 terabyte sata drive too. Everything has worked perfect with this board for about 3 years. they turn it on and now it gives a beep of 1 long beep and 2 short beeps. No Video. Now I have seen the beep codes but it doesnt add up. I have removed everything and reseated. They do not use the onboard video, if I remove all the memory and power it on the board recognizes the fact no memory is there and gives the correct codes. I have checked all connections but the only thing online I see is it says possible video problem. Doesnt really add up and I checked the few connections that had been un plugged and everything is correct.
Has anyone ever seen this problem after putting in a drive? Oh yea also I have unplugged the dvd and hd's and still get the beeps. If its still video issue I am going to assume it has to do with the onboard video cards because with out the other card installed it still gives errors.
Any help would be greatly appreciated.

i heard about the full cmos clear yesterday....after the flash i just pressed the clear cmos button at the back panel...but now i did the full clear...
well i have an aerocool e80 700w psu...i was thinking it might be the psu...then i tried on my old 500w coolermaster psu and it worked fine(i could restart as many times as i wanted/no blank screen)
then i hocked back the aerocool to confirmed if it was at fault and POOOFFFF no more blank screen.i restarted any time with no problem...how can it be?what caused the blank screen and BSOD?
i will try to use the PC as much as i can and see if i get any blue screen...will keep u posted
***memory is Kingston 4*2gb.i ran memtest86 it found no error over 2 hours...i never overclock anything

Two short beeps 1 long beep 5 times then sequence of 8

Two short beeps 1 long beep 5 times then sequence of 8 short beeps at end of turning on desktop computer.
2 short beeps and 1 long beep (repeats 5 times) Unable to initialize video or video card required but not installed
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02222922&lc=en&jumpid=reg_r1002_us...
I unplugged everything thing externally from computer even monitor all usb ports etc... now what do I do any suggestions.
My computer will not display but does stay powered up.?

You might start with mentioning the computer model, and if you have added a Graphic card?
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

No display with loop beeps after changing DRAM Configuration Timing Mode BIOS

Mainboard - RS480M2
Please anyone help me, after I have override the settings for DRAM Configuration > Timing Mode and set it to manual the system does not display anything and long beeps can be heard, infinite beeps. What should I do? I tried clearing CMOS but to no luck...

hello, welcome to forum.
repeat Clear CMOS again. do not forgot to remove power cord from the PSU before proceed. also check and ensure memory sticks are filled well.

HP Pavilion DV5000 : Conexant Audio HD sound not working after upgrade XP to Windows 7

On HP support site there are no drivers for Windows 7 for Conexant Audio HD soundcard in HP Pavilion DV5000.
Have tried installing Vista drivers in stead, does not work.
Have tried renaming unzipped Vista files to camcaud.sys & camchal.sys and copied them into Windows/System32/Drivers and reboot, does not work.This is the only solution I found after reading forums for several hours, but does not work.
Would very much appreciate help.
Thanks.
This question was solved.
View Solution.

My solution is here (registry editing required):
Conexant audio (vendor 14F1, device 5047) – no sound on Windows 7 – solved

Fail to boot (short-short-short-long beep code) after M92p BIOS Update

Hi,
I recently updated my BIOS to the latest version using the System Update tool from Lenovo. For a while everything seemed to be working alright, as the BIOS was dowloaded and the computer rebooted. After rebooting the first time i was presented with the BIOS utility, and noticed that the update was progressing.
After 20 or so seconds the computer rebooted again. This is where my problems began. The computer immediately started beeping this short-short-short-long melody from the speakers. I thought this was normal, so I left the computer on for quite a while.
However, the beeping never stopped. Now the beeping resumed the instant i plug the power back in. I have yet been able to actually getting any sort of information on-screen telling me what's wrong.
I've tried following the "Recovering from a POST/BIOS update failure" on page 267 of the Hardware Maintenance Manual, but no luck with that so far. No matter where I place the jumper, the beeping code is the same short-short-short-long melody (yeah, it sounds like a disney tune or something).
Any bright ideas? The machine type is a M92p 2992-B3G
I'd hate to have to send it in for repairs, and Lenovo's Norwegian support line doesn't open until Monday, and there seems to be no way to call their 800-number in the states from here
Oh, and would this be covered by my warranty if repairs / motherboard replacement is the only way out?
UPDATE #1:
I found this in the manual;
3 short beeps and then 1 long beep DRAM memory
error
Perform the following actions in order.
1. Make sure the memory module(s) are properly seated
in the connector(s).
2. Replace the memory module(s).
3. Replace the system board.
This is pretty much Lenovo's way of saying "You're screwed", isn't it?
UPDATE #2:
I've now tried pretty much everything;
The solution as proposed on page 267 in the Hardware Maintenance Manual
Unplugging all cables and harddrives before booting
Removing my PCIe video card and PCI Wireless NIC before booting
Removing all memory modules, and trying 1 and 1 module
Moved a memory module from another machine that I know is working
No luck so far.
Ideas would be welcome at this point

I'm glad to hear it's just a simple memory error, however the original problem in this post is a bit more than just a memory problem.
This became a problem after a BIOS update, so somewhere along the way one of Lenovo's developer screwed up badly, and it's been bugging me ever since. There's absolutely no way for me to use any PCI-e card with my M92p.
I've tried 6 different cards, 3-4 different memory module combinaties, with our without harddrives plugged in, and every thinkable combination of these.
No luck. Therefore, I simply conclude that Lenovo are dicks, and we all know what dicks enjoy doing; **bleep**ing people over.
I've given up on the issue, and I'll never buy a Lenovo again after this.

When system is switch on(poweron) long beep and display is coming after hour

hello sir
when system is switch on(poweron) long beep and display is coming after hour
This question was solved.
View Solution.

Hello @anandgopinainar,
I am not quite sure what you are trying to say here. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As with this I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
As well if you could please elaborate on what is going on so that I understand it would help as well.
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

HP Pavilion p6774y won't start, 1 short beep 1 long beep

My HP Pavilion p6774y now makes one short beep followed by one long beep repeatedly when I turn the power on. Nothing comes up on the screen. I've taken the RAM out, switched them around, cleaned out all of the fans including the one in the power supply, taken the video card out, unhooked all extra things like monitor, mouse etc, no luck..
It is a HP Pavilion p6774y PC
AMD Phenom II 840T Quad-Core Processor
6gb DDR3 memory
1 TB harddrive
Windows 7 OS
ATI Radeon HD 5750 Graphics Card

ZJackson7, welcome to the forum.
According to this guide, the BIOS Beep Code that you are receiving is for a Memory problem. You can test your memory by removing all of the modules and replacing them one at a time and booting. Place the single module in the slot closest to the processor.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

1 long beep then 3 short beeps hp pavilion dv2726ca

I left my laptop in hibernate mode for almost half a day, so that I could easily start what I've been doing. When I returned, I discovered that the battery ran out of charge, I plugged it and waited for a bit but when I pressed the power button, the computer has this beeping sound 1 long followed by 3 short beeps. I would like to know what the problem is and if it can be fixed and how. thank you for you time!! p.s. i'm kinda close to freaking out about this
This question was solved.
View Solution.

Hi purplethumb
I'll try helping you in this,
According to the beep,
1 Long and 3 Short beeps may indicate a memory failure, or that a memory module has become loose. Try re-seating your memory and see if that helps.
It can also indicate a faulty power supply - battery
Try this:
First do a hard reset:
Follow the steps given in this document -
http://h10025.www1.hp.com/ewfrf/wc/document?cc=uk&lc=en&docname=c01684768
Then,
Test for hardware failure both HDD & memory sticks, of any failures found - HDD/RAM has to be replaced:
Follow steps given here-
http://h10025.www1.hp.com/ewfrf/wc/document?cc=uk&lc=en&docname=c01443317
If beep still there:
remove CMOS/RTC battery (small silver watch-battery used for proper functioning of time/date in laptop) after opening up back cover ---
Here's the user manual for the steps: http://h10032.www1.hp.com/ctg/Manual/c01295820.pdf
reinsert cell after an hour or so.
power on after connecting the AC adapter
reset bios to default, follow is document to get help regarding the steps : http://h10025.www1.hp.com/ewfrf/wc/document?cc=uk&lc=en&docname=bph07110#N604
Thanks,
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Monitor not displaying and beeping after instillation of new Graphics Card

just installed a Dual X R9 270X Graphics Card on my HP Phoenix Envyh9-1405a
and i get 6 long Beeps but no display on Monitor. I think i ve tried everything INCLUDING switching to Legacy Mode. Help please. Manny

Ok so ive been able to get the BIOS to display, by correctly saving the Legacy Support "enable" setting and save. No beeps now on start up!
But....thats it.....no windows 8 start up screen etc. Just the faintes white flicker at the corner of screen. Suggestions?
Manny

1 long beep and 2 short beeps

hello this is my second post....before i had problems with me8 bios, then downgraded using this forum tool..thx for that.
now i can boot my PH67A-C43 (B3) board and use it normally, but my problem is that when ever i try to restart or boot it again without waiting i get 1 beep with is normally the one which indicates that system is OK and then 1 long beep and 2 short beeps and no display on the monitor....i can only boot my PC if i let it turned off for 5 or more minutes...this is really annoying!!
specs:
Operating System
   Microsoft Windows 7 Home Premium 64-bit SP1
CPU
   Intel Core i5 2400 @ 3.10GHz   32 °C
   Sandy Bridge 32nm Technology
RAM
   8.00 GB Dual-Channel DDR3 @ 665MHz (9-9-9-24)
Motherboard
   MSI PH67A-C43 (MS-7673) (SOCKET 0)   37 °C
Graphics
   VX2250 SERIES (1920x1080@60Hz)
   ATI Radeon HD 5700 Series (ASUStek Computer Inc)
Hard Drives
   56GB OCZ-AGILITY3 (SSD)   30 °C
   149GB SAMSUNG HD161GJ (SATA)   24 °C
Optical Drives
   SONY DVD RW DRU-880S
Audio
   Realtek High Definition Audio

i heard about the full cmos clear yesterday....after the flash i just pressed the clear cmos button at the back panel...but now i did the full clear...
well i have an aerocool e80 700w psu...i was thinking it might be the psu...then i tried on my old 500w coolermaster psu and it worked fine(i could restart as many times as i wanted/no blank screen)
then i hocked back the aerocool to confirmed if it was at fault and POOOFFFF no more blank screen.i restarted any time with no problem...how can it be?what caused the blank screen and BSOD?
i will try to use the PC as much as i can and see if i get any blue screen...will keep u posted
***memory is Kingston 4*2gb.i ran memtest86 it found no error over 2 hours...i never overclock anything

Won't start up - 3 long beeps and 1 short beep repeated

As I was watching Netflix, the display went crazy and displayed horizontal lines and the computer froze.
I held the power switch down to shut it off.
After restarting, seemed to work fine for a few minutes, then same thing happened.
Reset again. Seemed to start up fine (heard the chime and the hard drive going) but no display output.
Reset again. Got the start up chime, a white screen with horizontal lines, and I get 3 long beeps and 1 short beep repeatedly.
Any ideas?
Thanks for your help in advance.

The beeps you're hearing means the system has no usable memory. You can try reseating the memory or swapping for other known working memory (pain as it is to open the mini up). Otherwise, typically that means it's new logic board time. See this Apple article: http://support.apple.com/kb/HT1547

Pavilion DV5000 no display 10 short beep after a long beep

Similar Messages

Maybe you are looking for