Pavilion dv6-1455ev upgrading memory

Hello,
I just purchased an 8GB memory module DDR3L (L for low voltage I think), installed it in my pavilion dv6-1455ev but the computer fails to boot.  When I turned it on, a blank screen comes up and numlock and caps lock flash.  This indicates memory failure I think.  I had to install back the 2 modules that came with the laptop in order to boot it. 
The question is what kind of memory does the pavilion dv6-1455ev support? Is it high or low voltage?  I beileve DDR3 is the correct option, I am not sure about the voltage.  And what configuration? Ie, 1 module, 2 modules, etc.  I tried to locate this information on the hp support page of the  dv6-1455ev but it seems that this information is not available.
Thanks for any help
Chris

Hi,
The following link shows its specs:
   http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02066926&cc=lb&dlc=en&lc=fr
It uses normal RAM, not low voltage. You can find all information for it on the following link:
   http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&l​c=en&product=4146860
Regards.
ps You may want to bookmark the above link for future references.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • HP Pavilion dv6-6170ee upgrade

    Can i upgrade HP Pavilion dv6-6170ee to 16 GB RAM?
    This question was solved.
    View Solution.

    Hi,
    The following link shows its specs:
       http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&docname=c02982007
    8GB is the max. BUT Crucial says for a similar machine:
        http://www.crucial.com/upgrade/HP-memory/Pavilion+​DV6+Series/Pavilion+dv6-6170us-upgrades.html
    but not the following:
        http://www.crucial.com/upgrade/HP-memory/Pavilion+​DV6+Series/Pavilion+dv6-6172nr-upgrades.html
    Confusion isn't it. To be at the safe side, I would follow the specs.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Pavilion dv6 WLAN upgrade

    Hello, I have a dv6 product number A1U57AV.  BIOS F.19  Win7 64
    After many chats with support, I wanted to put my findings out, and ask if anyone has found any solutions to this issue.  I was trying to upgrade my Intel Centrino Wireless N 1030 WLAN card with the Intel 6230 Advanced N card.  It states in the manual that my motherboard and chipset should support this card.  I ordered the 6230 from Amazon.com, and it didn't work.  I figured I had a non-genuine part, and returned it.  I was rooked into ordering the same card for nearly 4x the price from HP Parts.  I did so, and found that the same WLAN hardware configuration error 702 came up before the win7 boot page even came up.
    I found through investigation that the part numbers of the hardware are on a whitelist in the BIOS, and if the configuration fits the restrictions, the hardware will work.  Unfortunately, I found that there was a mistake in the recording of the part numbers for the WLAN hardware. The 6230 is listed instead with a duplicate 1030 part number.  The correct part numbers are as follows:
    Intel Centrino Wireless N 1030 WLAN module 631956-001
    Intel Centrino Advanced-N 6230 WLAN module 636672-001
    The 1030 card is not cutting it for me, and is ruining what is otherwise, an outstanding laptop.  It's like having training wheels on a Cadillac.  All that would be needed is to insert the correct part number into the BIOS program code, and I am off to the races!
    Can anyone help me?  Anyone have anything better to tell me than support did?  How do I get this problem to the engineering/programmer level of support?  So many questions.
    Thanks in advance!

    Hi,
    Please do not post same question many times. Thanks you. Try another one:
      http://h30434.www3.hp.com/t5/Wireless-Internet-Home/Pavilion-DV6-WLAN-upgrade/m-p/1605525
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP Pavilion DV6-6165tx Upgrade Advice Needed

    Hi, I purchased HP Pavilion Dv6-6165tx and now I have to upgrade my laptop RAM.
    Here are the two models i have selected and i'l like to know if these both models are supported by HP DV6 6165tx.
    1. http://www.snapdeal.com/product/transcend-jetram-ddr3-4-gb/1430631
    2. http://www.snapdeal.com/product/transcend-jetram-ddr3-8-gb/1430575
    Please reply ASAP

    In your laptop, a pair of either would be supported. Since you have an Intel processor your laptop can handle up to 16 gigs of memory, 2 x 8 gig DDR3-1333mhz SO-DIMM. 
    Your Service Manual
    See Pages 5-6. 
    You are better off running two identical size and speed modules so it will be dual channel
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • HP Pavilion DV6 Graphics Upgrade

    Hello ladies & gentlemen,
    I'm the proud owner of a HP Pavilion DV6 Notebook. The only flaw I've found is that it doesn't have a good video performance (which is a shame for a having an 720p HD display). The graphics device installed is a Mobile Intel 4 Series Express Chipset Family.
    How can I upgrade my Notebook graphics and video processing?
    If you need any more information in order to answer my question, please tell me.
    Thanking beforehand,
    karu_nto
    {Personal Info Removed}
    This question was solved.
    View Solution.

    Hi,
    For all practical purposes, it's not possible to upgrade your graphics device as the graphics chip is physically soldered to the Motherboard of your notebook.
    Best wishes,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Pavilion DV6-6130ec- Upgrade to FULL HD Display

    Hello, I own an HP Pavilion DV6-6130ec, there is PN:LS354EA.
    I want upgrade the notebook with FULL HD Dispaly- SPARE:665335-001 
    But I need a FHD supported cable for that notebook,  because when I connect FHD display to my laptop it works but there are stripes on all the displays..  my cable is LVDS G AB610 A   HPMH:B2995050G00004   
    In manual I found that this cable supports FHD 656805-001 but service center here can not order it.. 
    Can you help me with this upgrade problem?   
    Original post in my main language: Zdravím, vedeli by ste mi poradiť ohľadom LCD káblika?
    Mám ntb HP DV6-6130ec  PN:LS354EA
    V ntb je LCD displej s rozlíšením 1366x768  SPARE: 667896-001 a chcemsi tam dat FULL HD SPARE:665335-001.
    Len neviem či môj LCD kábel podporuje FHD rozlíšenie, ked nan zapojímFULL HD displej tak je obraz čiarkavý a taký do zelena ale inak ho zoberie- je na nom označenie: LVDS G AB610 A   HPMH:B2995050G00004, Spare neviem lebo som nerozoberal palm rest. iba displej
    Viete mi poradit prosím Vás,  či káblik s FHD podporou.. podla manualusom našiel tento že má podporu FHD:  656805-001 a čislo 644362-001mám asi v ntb ja.
    Vďaka. 
    This question was solved.
    View Solution.

    Lukitech wrote:
    Hello, I own an HP Pavilion DV6-6130ec, there is PN:LS354EA.
    I want upgrade the notebook with FULL HD Dispaly- SPARE:665335-001 
    But I need a FHD supported cable for that notebook,  because when I connect FHD display to my laptop it works but there are stripes on all the displays..  my cable is LVDS G AB610 A   HPMH:B2995050G00004   
    In manual I found that this cable supports FHD 656805-001 but service center here can not order it.. 
    Can you help me with this upgrade problem?   
    Original post in my main language: Zdravím, vedeli by ste mi poradiť ohľadom LCD káblika?
    Mám ntb HP DV6-6130ec  PN:LS354EA
    V ntb je LCD displej s rozlíšením 1366x768  SPARE: 667896-001 a chcemsi tam dat FULL HD SPARE:665335-001.
    Len neviem či môj LCD kábel podporuje FHD rozlíšenie, ked nan zapojímFULL HD displej tak je obraz čiarkavý a taký do zelena ale inak ho zoberie- je na nom označenie: LVDS G AB610 A   HPMH:B2995050G00004, Spare neviem lebo som nerozoberal palm rest. iba displej
    Viete mi poradit prosím Vás,  či káblik s FHD podporou.. podla manualusom našiel tento že má podporu FHD:  656805-001 a čislo 644362-001mám asi v ntb ja.
    Vďaka. 
    Hi,
    I have ordered a FHD cable from China for a Dv6-7000 but it uses a different part number and the product number (50.XY...) is also different. You have to look for a LCD cable 50.4RN10.022.
    http://www.ebay.com/itm/LCD-LVDS-Cable-for-HP-Pavilion-DV6-6000-FHD-656805-001-50-4RN10-022-/1813516...
    The thing is that most of the suppliers use the LVDS 50.... product numbers and not part numbers like HP. It took me hours to find the right product number for my Dv6. 
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • Pavilion dv6 - 2090er - upgrade wireless card "b/g" to "n".

    I have HP Pavilion dv6 - 2090er and I 'd like to upgrade my wireless card "b/g" to "n". What a model of wireless card is compatible to my system

    Hi:
    Below is the link to the service manual for your notebook.
    http://h10032.www1.hp.com/ctg/Manual/c01860375.pdf
    Supported wireless cards can be found in Chapter 3, starting on page 3-6.
    If I were you, I would get the Broadcom 4322AGN 802.11a/b/g/n WiFi Adapter with the applicable HP part # depending on what country you live in.
    That is a dual band (2.5/5.0 GHz card).
    You must get the card with the HP part # on it, or it will not work.
    I like to get used but tested and working cards on eBay. So a search by the part number.
    Or you can order new from HP at the link below.
    http://h20141.www2.hp.com/Hpparts/Default.aspx?mscssid=1D1B095404B64D8B80E1ACB9DD38E76D
    Paul

  • Pavilion dv6-3250US UPGRADE to USB 3.0 Ports

    Can I upgrade a Pavilion dv6-3250US to USB 3.0 and if so, how do I do this?

    Hi Dkellyco,
    I am sorry to inform you the only way to upgrade to USB 3.0 is to install a new motherboard.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Pavilion dv6-7090el Upgrade?

    Hello,
    sorry for my broken English ...
    I would like to upgrade my netbook Pavilion dv6-7090el.
    Someone please tell me which components can be replaced?
    Hard disk? GPU? RAM?
    I would like to install an SSD: should I choose a particular model, or are
    all compatible?
    Thank you!
    fp1959
    This question was solved.
    View Solution.

    It comes with 8 gb of RAM which is maxed. The CPU is fast already and an upgrade would not be worth it. The video cannot be changed. The hard drive could be replaced by an SSD and that is going to be a very noticeable upgrade. I personally have had great luck with Samsung 840 SSDs, either the Evo or the Pro series. The Evo is mainstream and the Pro is kind of pricey. But there are a lot of very good SSDs out there. If you need any more help post back.

  • HP Pavilion dv6 1323el Upgrade RAM

    I have a hp dv6 1323el, 4GB of DDR3 RAM and would like to expand to 8Gb. I only have 2slots to use 2x2GB of RAM currently occupied by Samsung Max Width Banda PC3-10700(667 MHz). What do you recommend and where to buy?
    Thank's.
    This question was solved.
    View Solution.

    This will depend on where in the world  you are located. Here is one online vendor. Only buy guaranteed compatible memory modules. Just do a Google / Bing search with dv6-1323el and upgrade memory as the search terms. I recommend that you stick with the PC3-10700(667 MHz) specs.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • HP Pavilion dv6-1460er upgrade ram problem

    Hi,
    in my Pavilion dv6-1460er laptop I have Samsung M471B5673EH1-CH9 2gb memory (2GB, 1333MHz, DDR3-1333 PC3-10600).
    I want to add Kingston KVR13S9S8/4 4gb module.  Looks like they have the same specifications. But when I add Kingston module I have black screen and my laptop wont load. I tried removing my old ram and starting the laptop only with kingston module but still got black scrreen. 
    What might the problem be?
    Thanks for your help.
    This question was solved.
    View Solution.

    But why when I add Kingston 99U5428-046.A00LF 4GB (its 1333 if I am not mistaken) everything works fine? 

  • HP Pavilion DV6-3110er Upgrading Wi Fi

    Hello!
    I wanted to replace the laptop HP Pavilion DV6-3110er Broadcom 4313 WiFi module 802.11b/g/n at Ralink RT3592 802.11 b / g / n WiFi, but the bios gives me an error 702, apparently it's hardware is not included in the white list, but my privybore notebook drivers are available there for Broadcom 4313 802.11b/g/n what could be the problem? And what WiFi modules are available for this laptop? Bios updated to F.29.

    Hello zadonec,
    You want to change the Wi-Fi adapter in your notebook.
    I don't think that the Ralink RT 3592 is supported by you notebook.
    Here is a link to your service manual with parts for your notebook.
    Clicking the White Kudos star on the left is a way to say Thanks!
    Let me know how everything goes.
    Have a good day.

  • Pavilion g6 - 1045ej upgrad memory

    Hello
    I have HP pavilion g6 1045ej, with 2 slots to momery, 1 with 4gb, this is the computer:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02735623&cc=us&destPage=document&lc=en&tmp_docn...
    according to that data, i can't add another stick to upgrade the memory.
    in other page of hp, i can find the  HP Pavilion G6 Notebook PC:Maintenance and Service Guide, and in page 3 chapter 1 they wrote that G6 laptops can upgdate up to 8GB:
    http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c02770249-1.pdf
    so i want to know if i can add another stick of 2gb to get 6GB ram or in my model i cant?
    Thanks in advance.
    This question was solved.
    View Solution.

    Hi:
    You can add another 4 GB chip to the existing one for a ttl of 8 GB.
    The memory ugrade info on the first link you posted is not written very good.
    It leads you to believe that you already have the maximum amount of memory installed.
    What the author was trying to say is you an add another 4 GB chip.
    This can be confirmed in the service manual, chapter 1 page 3.  However they left out the supported 2 x 4096 MB configuration.
    http://h10032.www1.hp.com/ctg/Manual/c02770249.pdf
    So to answer your question...yes, you can add a 2 GB chip to the 4 GB chip and get 6 GB but you may as well shoot the moon and get a 4 GB chip, max the thing out to 8 GB, have the memory run in DDR mode and be done with it.
    The memory will not run in DDR mode with a 4 GB + 2 GB memory configuration.

  • Pavilion dv6-3000 6G memory is recognized as 4G

    The computer I am using is actually a notebook that has 6GB memory, however the bios can only see 4GB, how should I do ?

    OK,so you will need to find out if the issue is with the Memory module or the Slot...
    To do that, you will need to open the bottom service door/panel and reseat the 2GB Memory Module and check, if the memory gets picked by they system that great!
    Else you will need to swap the memory module around i.e 2GB in place of 4GB and vice versa...that will tell you if the issue is with Memory module or Slot itself...
    Although I am an HP employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

  • Pavilion DV6-6c61el A7Q11EA Help me for maxium real ram installation

    Hi,
    sorry for my english.
    My question is, How many ram is possible to install on Pavilion Dv6-6c61el. 
    Now I have 8gb (2x4gb).  I telephon the Hp customer service today, and the informal information is "it's possible to install 16gb Ram ddr3.
    Is for you try?  
    Help me please.
    {Personal Information Removed}

    Hi,
    I would ask that personnel put it on paper first, this is black and white:
       http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03138058
    BUT if you wish to try, you can try the following link for a similar machine:
       http://www.crucial.com/upgrade/HP-memory/Pavilion+DV6+Series/Pavilion+dv6-6c59ea-upgrades.html
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • Migo Goods Receipt Purchase Order

    Hi all I have to clear ,in transaction Migo, the wbs elements ( only in certain cases ) .For that we ve created an user-exit in the program of Substitutions that clear the fields : cobl-ps_psp_pnr, cobl-mat_pspnr. But the two fileds are not cleared .

  • Narrow view on movies

    hi folks, this is really annoying me, when ever i play movies the view is always very widescreen and narrow, even tho i have a widescreen imac and a 32" widescreen lcd tv connected up to it. is there any way to make the files view larger, as theres a

  • Datamodeler - Naming Standards - technical white paper no longer available?

    Hi, I am wondering, is this document no longer available? http://www.oracle.com/technology/products/database/datamodeler/pdf/DataModelerNamingStandards.pdf I a m trying to learn how to apply Naming standards in data modeler but i cannot retrieve this

  • Report painter currency

    Hello Experts, I have an issue to change the currency in report created by report painter. Report library:1VK table : CCSS Currently it is in CNY object currency, but I would like to see the report by CO area currency EUR. I used T-code: RPC0 to set

  • Customized variable for Bex

    Hi Gurus; I am using BI 7.0. My client wants a customized variable for 0CALMONTH with 2 dialog boxes in the selection screen saying "From month" and "To Month". When you input months, say; 06.2008 in "From Month" and 08.2008 in "To Month", the output