Pavilion dv6 3225dx sd card reader stopped working

The built in SD card reader on my pavilion dv6 3225dx has stopped working.  I'm running Windows 7 and never had a problem but now nothing happens when the sd card is inserted  Please help.

Hi,
Have you tried to use other card(s) ? Something like the following one may help:
   http://au.cellphoneshop.net/cousbcarefor.html?gclid=CPfr0rePwrcCFYxgpQodQU8AZQ
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • HP Pavilion elite sd card reader stopped working

    System -HP Pavilion Elite  HPE Series  500z   Product No XX091AV#ABA
    Operating System - Windows7
    The sd card reader stopped working.  tried everything
    No error messages

    Hello @rusty99nail,
    I understand that your SD Card Reader is not working on your HP Pavilion Elite HPE-500z CTO Desktop PC. Has it ever worked? If so I suggest you follow the steps in the HP Support document: Using Microsoft System Restore (Windows 7) and roll your system back to a point in time where your SD Card Reader worked.
    If it still does not work after the Microsoft System Restore I would like you to do a backup and recovery of your computer back to factory settings. To backup your personal information and ensure that it is not lost I would like you to review and follow the steps set out in the HP Support document: Backing Up Your Files (Windows 7), which will ensure your personal files are up to date.
    ***WARNING!! If you want to keep any emails or bookmarks/favorites you will want to back those up as well as I do not believe they are backed up in the HP Backup process.
    Next, I would like you to review and follow the steps set out in the HP Support document: Performing an HP System Recovery (Windows 7), which will you through recovering your computer back to factory settings.
    *** IMPORTANT - Your personal files such as libraries, personalization settings, user accounts, and desktop themes are permanently removed. As well the computer settings are returned to the defaults (the way it was when it came from the factory). All apps and software that were installed on the computer when it came from the factory are reinstalled, and their settings are reset to the defaults. Additionally, software, apps, programs, and everything that you have installed or saved on the computer are permanently removed.
    If the above steps did not resolve your issue please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I would like to thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Card reader stopped working

    My card reader (sd,ms,xd) quit working. It worked for two years with no problems and today it quit. I have an HP Pavilion Slimline s5220y desktop and Windows 7. When an SD card is plugged in, nothing. Autoplay is on and I am able to transfer pics manually from the card to the PC. Also, simultaneously, when I try and attach a pic to an email (gmail) only 5 library folders are displayed out of the 50+ folders in my My Pictures library.  This seemed to happen about the same time as Google wanted me to use Drive; could there be a Google gremlin at work here? I'm not much of a computer guy so I need simple answers, please.

    Hello larrydayton,
    Your card reader stopped working correctly.
    Since you’re having multiple problems at the same time, I’d suggest a system restore.
    This will take the system back to when everything was working correctly without affecting your personal files.
    Here is a link on how to do a restore.
    Let me know how everything goes
    Have a good day.

  • Satellite A205 - SD Card reader stopped working after Win 7 upgrade

    Satellite A205-SP5818
    I recently upgraded to Windows 7, and, among other things, the SD Card reader stopped working. I already downloaded and installed the driver offered in this site: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2190493& rpn=PSAE3U&modelFilter=&selCategory=3&selFamily=10 73768663 (it's the next-to-last driver shown) but it went from not working all together to making funny noices when I insert the SD card... and then not working.
    Any ideas of other drivers that might work, or any kind of other solution?
    Thanks.

    Hi
    Try to remove eh SD card controller from the device list.
    Then reboot the unit.
    After that windows will ask you for an driver.
    You can download this driver:
    [SD Driver, Flash Memory v2.0.0.7|http://cdgenp01.csd.toshiba.com/content/support/downloads/driver_cardreader_ti_25844A.exe]
    You should unzip this package and has to point the driver files in this folder
    This should helps to get the SD card reader working again

  • HP Pavilion DV7 1240us Express Card Slot Stopped Working

    My express card slot stopped working.
    The tech I was working with for the HP tuner card seems to think it is a driver or hardware issue.
    Please see the email string below.
    I tried all I know to get the slot to work, but I do not know which driver for it.
    Please help me.
    Thanks in advance.
    Below are the emails.
    Thanks, the problem is I do not know which driver it is.
    I looked through the entire device manager tree, and do not know which driver controls the express slot, can you send me in the right direction?
    I have an HP Pavilion DV& 1240us laptop.
    Any direction would be greatly appreciated.
    ----- Original Message -----
    [Personal Information Removed]
    Sent: Monday, September 24, 2012 5:14 PM
    Subject: RE: Ticket: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 Ap p: wintv6 Country: usa
    Without inserting another device into the slot the only thing I can think of is checking device manager for the drivers for that express slot and see if they are installed or reinstall the drivers.
    If the device works on another laptop but continues to have problems on the first one then there must be something going on with the express slot on the first laptop.
    Regards,
    Jorge 
    [Personal Information Removed]
    Please include previous correspondence when replying.
    From: J[Personal Information Removed]
    Sent: Friday, September 21, 2012 5:44 PM
    To: [Personal Information Removed]
    Subject: Re: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 Ap p: wintv6 Country: usa
    No I do not, have you had this type of issue before?
    Could it be missing or corrupt drivers?
    Is there a way to test the slot without a device, checking drivers etc..
    ----- Original Message -----
    [Personal Information Removed]
    Sent: Friday, September 21, 2012 4:41 PM
    Subject: RE: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 Ap p: wintv6 Country: usa
    Do you have another express card device that you can plug into the laptop in question and see if something malfunctioned on the slot possibly?
    Regards,
    Jorge [Personal Information Removed]
    Please include previous correspondence when replying.
    From: JrSonic [Personal Information Removed]
    Sent: Friday, September 21, 2012 11:43 AM
    To: [Personal Information Removed]
    Cc: z1r1200cc
    Subject: Re: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 Ap p: wintv6 Country: usa
    Yes it is connected directly, it does not even get recognized by device manager.
    No default beep when plugging and unplugging.
    IT USED TO WORK NO PROBLEM.
    It will work in another laptop.
    I am a tech by trade, so if I have to edit the registry, etc.. let me know.
    Right now I am baffled, what can I do.
    From: [Personal Information Removed]
    Sent: Friday, September 21, 2012 10:01 AM
    To: [Personal Information Removed]
    Subject: RE: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 Ap p: wintv6 Country: usa
    Hello,
    Are you making sure to connect the 1500 directly into the express slot in the laptop and into a usb converter?
    When it is plugged in does anything appear in device manager with a yellow mark next to it? Is it being listed under sound, video, game controllers at all?
    Regards,
    Jorge [Personal Information Removed]
    Please include previous correspondence when replying.
    From: Joe [Personal Information Removed]
    Sent: Wednesday, September 19, 2012 7:18 PM
    To: Danger1
    Subject: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 App: wintv6 Country: usa [senderbase]
    Name: Joe
    Email: [Personal Information Removed]
    Product: HVR-1500 (77xxx)
    Application: wintv6
    OS: vista64
    Country: usa
    Problem description: My tuner stopped working,I used HWclear to no avail.
    The tuner works in another laptop, so it is not the hardware.
    Will not make the customary sound when plugged and unplugged.
    I am very PC savy and tried all I know, driver reinstall etc..
    Please help.
    Thanks

    Hey there,
    Can you explain more on this issue? I see by the emails the Express card slot is not functioning. What you are using in the card slot? Is the the HP TV Tuner card? If so, do you have another express card handy so you could test to see if it was the card or the slot? If your missing the driver you will need to use the HP Recovery CD to reinstall the TV Tuner driver.
    -Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • HP Pavilion Elite e9280t Desktop - Memory Card Reader Stopped Working

    Hello,
             I have a HP Pavilion Elite e9280t CTO Desktop PC ...  The memory card reader recently stopped working.  I believe, maybe the firmware, and/or driver was deleted by one of my optimization softwares. I checked the "Device Manager" list and was unable to locate "any" memory card device.  All the USB plugs work fine. When I place an SD card in the memory card reader slot, the light comes on, but the computer does not recognize the card. The card does not show up in my "Computer"  window with the other drives.  I checked the card out on my other computer, and it worked fine.   I also have an HP laptop that I tested my SD cards on, and the cards worked fine on my laptop. 
            I would appreciate any help, or suggestions, that any one might give.
                                                                                                                                                                         Thank You 

    Read the troubleshooting information on the folowing HP document
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01884924&lc=en&product=4066665&tmp...
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Pavilion p6-2330 Card reader stopped working

    Hi!  I seem to be having trouble with my card reader - it has always worked fine up until 2 days ago, and I have used this particular sd card in it before with no problem.   Now when I put my card in the slot the green light comes on but when I go into "Computer" nothing shows up.   Also when I have the SD card in the slot the computer freezes - webpages won't load until I take the card out.  Thanks for any help you're able to give me!

    Hello catki,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that until recently your card reader worked fine, but in the last few days you have been unable to read your SD card.  First thing I would recommend is that you try a different SD card to ensure it is not the SD card itself that is the issue.
    If the second SD card does not work either then I am providing you with an HP Support document: Using and Troubleshooting Memory Card Readers (Windows 8), which will walk you through troubleshooting your card reader.
    If the second SD card works it is your SD card that is the issue. Try reformatting it and see if it works, if not it may need replacing.
    Please re-post if you require additional support. Thank you for bringing this issue to the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • HP Pavilion dv6 All 4 USB ports stopped working

    Hello,
    I recently bought a Pavilion dv6-6c11sa laptop. Windows 7 Home Premium 64-bit
    Everything was working fine for about a week, and then yesterday all of the USB ports stopped working. I have 4 USB ports in total, two 2.0 and two 3.0. No matter what peripheral device I plug in, mouse or flash drive etc, they're not recognized by the laptop. The lights don't even light up on the devices, regardless of the port. I've tried uninstalling and reinstalling the drivers in device manager, taking out the battery and rebooting, installing the chipset drivers (AMD), nothing works. No programs had been installed 3 days prior to the occurence, although I had rebooted several times in that time frame. I simply booted up the laptop yesterday, and nothing worked.
    Could anyone offer a solution or suggestion, please?

    Hello,
    I recently bought a Pavilion dv6-6c11sa laptop. Windows 7 Home Premium 64-bit
    Everything was working fine for about a week, and then yesterday all of the USB ports stopped working. I have 4 USB ports in total, two 2.0 and two 3.0. No matter what peripheral device I plug in, mouse or flash drive etc, they're not recognized by the laptop. The lights don't even light up on the devices, regardless of the port. I've tried uninstalling and reinstalling the drivers in device manager, taking out the battery and rebooting, installing the chipset drivers (AMD), nothing works. No programs had been installed 3 days prior to the occurence, although I had rebooted several times in that time frame. I simply booted up the laptop yesterday, and nothing worked.

  • Re-post:HP Pavilion dv6-6120ee laoptop ac adapter stopped working

     I have HP Pavilion dv6-6120ee laptop ..
    ac adapter suddenly stopped working and make electricity of the flat cutting off and when I tried it again it's not working
    after few days I noticed that "HP Laptop Power Cord Safety Recall and Replacement" I make an order and yes the problem
    was found because of the ls-15 cable that provided .. so as it is appeared its manufacturing mistake and I got hurt cuz of
    this mistake .. I don't know what is damaged now the ac adapter or the ls-15 cable but anyway if the ac adapter is
    damaged what will i do with the replacement cable I think it will be useless ... so as we see it was manufacturing mistake
    and not the user mistake please provide me a fair answer !

    Hi @8qth3n 
    I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
    I worked on behalf of HP.

  • My MBP mid2010 and my friend's MBP mid2011 SD card reader stopped working after upgrading to Mountain Lion. Please help

    Prior to Mountain lion upgrade we were running OS X Lion and everything was working fine. we upgraded to Mountain Lion and didnt notice the issue until a couple of months when we tried using the SD card reader to import pictures. i rolled back to snow leopard recently to wipe clean my hard disk and the SD card started working again but after updating to mountain lion the same issue occurs. need help thanks!

    Take you and your friend to an Apple store or AASP.

  • SanDisk Card Reader stopped working with OS X 10.4.7

    I have an older SanDisk single smart card reader, model SDDR-55. It worked fine with 10.2, but I cannot seem to get it to work with 10.4.7.
    When I reinstall the SanDisk driver (the most recent download available from them) and restart, I get an error when connecting the reader to my USB hub.
    The error says, "The system extension '/System/Library/Extensions/OnUSBMassStorageClass.kext was installed improperly and cannot be used.'"
    I have tried reinstalling, deleting the /System/Library/Caches files, restarting, calling SanDisk to make sure the latest driver works with 10.4.7. "It should", they tell me. So I am out of ideas. If anyone knows how to fix this please help me out. Thanks in advance!
    G4 Yikes! Tower   Mac OS X (10.4.7)   400 MHz / 100GB HD

    I know what you mean. My Zio smart media reader will not work either. if I install the driver and immediately use the card reader, it will work.
    Once I repair permissions, the reader will not work until I reinstall the driver again. Very frustrating.

  • Scroll bar on my hp pavilion dv6 laptop touch pad has stopped working in Firefox but works in all other software packages, eg Outlook, Chrome, IE9, iTunes, etc?,

    This problem started in the last 24 hours.
    I've tried completely shutting down my laptop and restarting, but the problem remains.

    Hi AM_Kidd.
    Thanks for your reply.
    I have done a complete uninstall and re install of iTunes and all related apple programs from my laptop through control panel, add remove programs and also by going through program files and deleting all tracers of any left over folders remove programs may have missed.
    My apologies for forgetting to add this in my original post.
    Thanks again

  • EliteBook 6930p SD card reader not working

    Hello,
    SD card reader stopped working on my EliteBook 6930p because of broken card socket. I found audio/card reader board on eBay, it looks same, but  has got different part number. Can audio/reader board  part no. 48.4V902.021 be replacement part for board no. 55.4V902.011?

    Hello yohanonbenavrom. I understand you are experiencing issues with a memory card reader. I will provide the HP documentation to troubleshoot the issue. Please select the correct document based on your operating system:
    Windows XP and Vista: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=bph07910
    Windows 7: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01564223
    Windows 8: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03453319
    Please respond when you complete the troubleshooting. I look forward to your response.
    Mario
    I worked on behalf of HP.

  • Pavilion dv6 sd card reader not working

    I have searched the boards and have not found an answer to my built in SD card reader not working any more.  It worked fine until a couple weeks ago. When I go to "my computer",  the sd card does not show up as an available drive. I have tried several cards with no luck. The cards work fine when I use a USB card reader, just not the built in one.
    I checked the driver in device manager - at least the one I believe is the correct one - Realtec PCIE Card Reader.
    Any other ideas? It is a pain having to carry around an extra card reader. Thanks for the help
    rv9a
    This question was solved.
    View Solution.

    Good morning rv9a.  
    Prior to the uninstall did the computer make a noise to indicate it recognized the card when you put it in?
    You should go ahead and reinstall the specific driver for the card reader just to make sure that doesn't have an effect on the issue.  Here is the link for Windows 7 and here is the link for Windows 8.
    Another possibility is the the Plug and Play service is deactivated.  Try the following to check.
    Press the Windows+R keyboard shortcut.  
    Type "services.msc" into the box and click okay.
    Scroll down until you find "Plug and Play" in the list.
    Ensure that it is started.  If it is not right-click on the service and select Start or Enable.
    I'll keep an eye out for your response; have a great day!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • Pavilion g6 series SD-MMC card reader NOT working

    I have Pavilion g6 series. My SD-MMC card reader isnt working. How to fix?

    Downloading this driver should sort out the problem!
     http://download.gamblis.com/2011/03/30/hp-pavilion​-g6-1a69us-notebook-realtek-card-reader-driver-6-1​...

Maybe you are looking for

  • Issues ordering with 2 phone lines on one account.

    After being on the phone for half an hour on Friday the woman seemed to understand everything but we got no confirmation message so I called again today and after spending an hour on the phone was told to call back tommorow.. Not getting my hopes up

  • [JS][CS3] Drop down menu problem

    Hi I am trying to use a drop down menu inone of my dialogs.  The emnu is showing, but i cannot select it. myDialog = new Window ('dialog', 'Name',[50,50,350,370]); myDialog.frameLocation = [300,200]; var myListItems = ["One","Two","Three"]; var myLis

  • Dragging images from Safari to Desktop, image goes to random location

    Hi Everyone, Problem is being experienced on a Retina MBP, in a laptop-screen + 2 more setup: one through Thunderbolt to DVI, and the other using HDMI to DVI. It's pretty easy to reproduce.  I open Safari up, not fullscreen, and drag an image that's

  • Contains pattern syntax in abap

    Hi, I want to check inside loop of itab ,whether my field f1(132) type c contains value '####',if it is true i have to code continue.so i created one var f2 like this data:f2(20) type c value '########'. my code: loop at itab. if f1 cp f2. continue.

  • File menu not updating

    Installed a few extensions in dreamweaver. As ever it gives a few options to access. Where one is to tick the windows>insert option so that I get extra icons on the screen, I can access the extension. However on these I should be able to go to the in