Pavilion dv6 mic not detected. Windows 7 64-bit.

mic not detected during speech recording, skype, or ym. tried setting up mic in the configuration in control panel, installing updated driver for idt high def audio CODEC but still does not work

Hello waynenixcpa!
Congratulations on the new computer! I would be happy to assist you with the syncing issue.
First, I would like to suggest deleting the current partnership. Instructions for deleting the partnership: 1) Ensure the device is disconnected from the computer. 2) Launch WMDC. Navigate Start > (All Programs) Windows Mobile Device Center. 3) From Mobile Device Settings, click >>more (located in the lower-right corner). 4) Click End a partnership. 5) Select the partnership then click End partnership. Next, I would soft reset your phone, and restart your computer. Then you can re-create another partnership for syncing with Outlook and your device. Now you should have the option to sync Contacts, Calendar, Email, Tasks and etc...
Please let me know how this works out for you.

Similar Messages

Why is my built in webcam and mic on my hp pavilion dv6-6113cl not working?

why is my built in webcam and mic on my hp pavilion dv6-6113cl not working?

Enter the device manager and verify that the webcam is present and has a driver installed.
1) Test your webcam by using the YouCam software that was delivered with your notebook. (you should also be able to test it with MSN or Skype setup). You may have to uninstall it and then reinstall the software.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I have pavilion dv6 sound not working hp provide new update idt stil not working

HI .
i have pavilion dv6 sound not working hp provide new update idt stil not working

Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
Go to Control Panel,Programs & Features-Uninstall IDT software and restart the laptop.Next install using the downloaded file.
```````````````````````````````````````
If still no sound,try a hard reset, works sometimes.Disconnect all external devices first.
1-remove power cord and battery
2-press power button for 30 seconds
3-reinstall only power cord for first startup.
4-power on
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

HP pavilion dv6 microphone not working . help please . . .

HP pavilion dv6 microphone not working . help please . . .

Hi,
DV6 is a series of hundreads of models, what is yours ? To help us answer question quicker, please read this:
http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to/Welcome-Get-started-here/td-p/699035
You may wat to try this first:
1. Right click speaker icon (right hand corner)
2. Select Microphone devices
3. Right click Microphone
4. Enable it
5. Click Apply/Ok
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Hp Pavilion is now not detecting the battery all of the sudden after 1 1/2 years.

My Hp Pavilion laptop is not detecting the battery. I can't seem to find information anywhere regarding how to resolve this issue. The battery was detected as of yesterday and was charging still at a "good" level. The battery Icon has an X and "No battery detected" .
Why does this happen and how to resolve it. I've tried taking off and on the battery several times as well as rebooting. NO luck!
Thanks,
Mayra

I'm using iMovie 9

Pavilion dv6 Webcam not working?

I have a Pavilion dv6-1030ca notebook, and for the past few weeks, I've been having trouble with my webcam. When I open HP MediaSmart Webcam, I get the following error message: "No video device detected. Please plug a video device into your computer. If you are using an integrated camera please make sure it is turned on." I have an integrated camera, and it (usually) turns on when the webcam application opens. I am running Windows Vista with SP1, and have tried many things to fix it, to no avail. The webcam does not appear in Device Manager, under Imaging Devices nor any of the USB Root Hubs. So far, I have attempted to:
- Reinstalled the USB Root Hub Drivers
- Tried to fix the solution in BIOS (as another thread suggested)
- Attempted to use Recovery Manager to reinstall the driver (was not in the list)
- Created Recovery Disks to solve the problem (it didn't)
- Upgraded the MediaSmart Webcam software
I am in school right now, and I really can't afford to give my laptop away to get repaired for three weeks since I have exams coming up. Any help would be appreciated! Thanks!
Message Edited by annabelle89 on 07-27-2009 08:30 PM
Message Edited by annabelle89 on 07-27-2009 08:31 PM
This question was solved.
View Solution.

I am in the exact boat as you.
Couldn't understand why all of a sudden, after about 3 months, the webcam 'device not found' in Win7 Device Manager, Google Chat, Skype, etc.
Called HP support, and they made us do a hard reset of the entire notebook, removing the battery, ac cord, and holding down the power button for 1 minute.
Webcam came back for 1 day, but I'm not about to unplug and reset everytime I am in the middle of a skype call?!
Sadly, HP or Costco (where it was purchased) doesn't seem to care or are willing to provide a solution.
Instead of recalling the computers, like automobile and other industries, they just wait and hope that the warranty runs out before it becomes a big deal.
They didn't stop selling them either, even with this known problem.
So now they have the G series of notebooks, and so the dv6 and its headaches can fade away for HP.
I have probably been involved with over 100 HP product purchases in my job the past 5 years, but this will be the last for the forseeable future.

Pavilion dv6 mousepad not working

My laptop operates on windows 7, 64 bit.
The mousepad has stopped working and there are no lights displaying on the pad.
I tried installing the driver from HP & it says that Ihave a later driver installed.
I am unable to find that driver. I use a USB mouse but have always done so without a problem until now.
Any ideas?
Thanks in advance

Hi curlyclan,
Welcome to the HP Forums!
Thank you for your post, I will do my best to help.
I hope you enjoy your experience, to help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I grasp that the Touchpad has stopped responding and it is not lit. Here is a link to Using and Configuring the TouchPad (Windows 7 and Vista) that may help. Was it perhaps, accidently disabled?
You can run diagnostics to test the Touchpad for failure. On startup press F2 approximately once every second to display the diagnostic screen. About UEFI and the Startup Menu.
You can also run MS Fix It to help resolve issues. The HP Support Assistant can also help to fix issues and look for updates.
If you would like further assistance, would you please provide the exact model of pavilion dv6 you have? How Do I Find My Model Number or Product Number?
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Hp pavilion dv6-6c65sx not able to do recovery

I have hp pavilion dv6-6c65sx A7P80EA#A2N . I decided to format my c drive and changed my active drive since then I can't do recovery for my laptop. other partitions of the drive are fine and I have preload folder with 17.6gb size and I dont know how to restore it. I tried to do recovery from the bios but there is an error with recovery path not able to restore it..
Also I lost my recovery tools after I formatted my C drive.
This question was solved.
View Solution.

Please mark the HP Recovery partition "Active" by selecting "Mark Partition as Active" using the Windows Disk Management Console. See HP - Partitioning and Naming Hard Drives (Windows 7) for information about using the Windows Disk Management Console.
If the above instructions didn't work and you didn't create your HP Recovery Media when you first setup your computer, please contact official HP support in your region / country, via the HP Worldwide Support Portal, to see if HP Recovery Media is available for your computer.
Alternatively, if you can still read the 25-digit Windows product key on the Microsoft COA affixed to your computer, you can install Windows 7 Home Premium using this key. Please see "How to Install Windows 7 Without the Disc" for instructions on how to download Windows 7, create the installation media, and install Windows 7 using the 25-digit product key from the Microsoft COA on your computer. This method will not install any HP customizations or value-added software and you will have to manually install all needed drivers from the HP Pavilion dv6-6c65sx Entertainment Notebook PC Drivers page.
Links to Windows 7 SP1 can be found HERE and HERE.
Direct link to Windows 7 USB/DVD Download tool.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

HP Pavilion dv6: Can not find a Recovery Manager

HP Pavilion dv6
Windows 7 Home Premium
I want to create Recovery disc but I am not able to locate recovery manager. I tried downloading and installing from below link, but didnt work.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=ob-75985-1
Also, my windows got corrupt once, so i reinstalled it with external windows CD with my windows product key and I still have recovery partition on my hard disc.

When requesting assistance, please provide the complete model name and product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of your computer, inside the battery compartment, or on the BIOS setup screen. Please DO NOT include your serial number. Enter the model/product information into HP's Online Consumer Support page and post it here for our review.
If you installed a generic copy of Windows 7 on your computer prior to creating your personal HP Recovery Discs, you may no longer be able to do so. If the "HP Recovery" partiton still exists on the hard drive and hasn't been damaged, please use the Windows Disk Management Console to mark or set the HP Recovery partition as active and reboot your computer. Please see HP - Partitioning and Naming Hard Drives (Windows 7) for information about using the Windows Disk Management Console. Upon rebooting, the computer should start the HP Recovery process. After recovering the computer to a factory like state, you should be able to create your personal HP Recovery Discs.
If this doesn't work, please contact official HP support in your region / country via the HP Worldwide Support Portal, to see if HP Recovery Media is available for your computer.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Pavilion dv6 will not boot up.

When I start my Pavilion dv6, the fan starts, the on key light on, light on f12 key and on caps lock key.
Screen remains blank.
Have tried taking out battery, and unplugging. Wait and power again. Same thing keeps happening.
HELP please.

Hi Thesaloniki,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion dv6 Notebook and getting a blank or black screen on startup. Try performing a hard reset. When performing a hard reset please note remove any and all USB devices, and remove memory cards from the card reader slot. Disconnect all non-essential devices. If that does not help try to turn on the computer you start to press F2 repeatedly till the menu opens. You can do a diagnostic test.
I would be happy to assist if needed as there are many models of Pavilion dv6's could you respond with the mode.. How Do I Find My Model Number or Product Number?
Please respond with which Operating System you are running:
Which Windows Operating System am I running?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HP Pavilion dv6-1355dx not turning on using AC power supply.

1. Product Name and Number:
VM222UA#ABA "HP Pavilion dv6-1355dx"
2. Operating System installed (if applicable):
Windows 7 64bit
3. Error message (if any):
Dose not turn-on on AC power or charge the battery
4. Any changes made to your system before the issue occurred:
None
Summary of the poroblem:
Facts:
1) The laptop works perfectly fine using the battery.
2) The battery dose not charge using the AC adapter that came with the laptop.
3) The battery dose not charge when the laptop is turned on or off.
4) No chaging light turns on when pluged into AC.
5) When the battery is pluged into the battery slot on the laptop, the white AC power led on the dc jack turns off.
6)The very second I remove the battery from the computer, the white AC power led on the dc jack turns back on!
7) With the battery removed and the AC power supply pluged into the laptop, the laptop won't turn on, and the white AC power led on the dc jack remains on.
Tests done:
1) Used another adapter with the laptop, but had the same problem.
2) Used different battery, but had the same problem.
Interesting fact:
When the battery is completly drained out, the white AC power led on the dc jack turns on, but I still cannot turn on the laptop on AC power supply.
Note:
I Have a multimeter that I want to use to test the power supply and charging circuit on the motherboard, but I don't have a schamatics of the mother board, so I am stuck.
Any suggestions from the HP community would be appriciated. Thanks.

The laptop has a modular DC jack that plugs into the motherboard with a cable and does not require soldering. The first thing to try is a replacement of that jack. Here is the Service Manual:
Manual
You need this part:
Power connector cable 533465-001
http://www.ebay.com/itm/DC-Power-Jack-w-CABLE-HP-PAVILION-DV6-1355DX-DV6-1030US-/140598729337?pt=Lap...
$7 on eBay, shipped.

Hp pavilion dv6 audio not working

product name: HP Pavilion dv6 Notebook PC
Product number: A3L69EA#ABU
no audio is working at all, not even when i use headphones, i have tried turning all volumes up and i have checked that the audio is enabled on the device manager, please help, thankyou

Go to the link below.Enter your Product Number as listed on Service Tag. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
Go into Control Panel,Programs & Features-uninstall IDT software.Restart the laptop and install using the downloaded file.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Boot camp does not detect windows anymore

hello
i have an iMac, osx Lion, i was using boot camp for windows xp, the cmd button did not work for some time and since i had to access some info on osx and was fed up with pushing over and over again the cmd on start, i went to windows control panel and changed the default opt on startup on osx.
after that the only option remained was osx lion, nothing shows windows partition anymore except the space on disk that is used but cannot be accessed. I would really need to access that, i have lots of stuff there i also use windows on mac for playing a game which sadly does not work on osx (League of legends). I tried using cmd+r, nothing happened. I am very sad and dissapointed, please someone help me.
with best regards,
me

you still have not clarified if you used BCDedit or repair the MBR
Whether you used an NTFS driver - that may be all you need - try the full functional demo Paragon NTFS for OS X, it is great at mounting PC NTFS volumes and cases.
http://www.paragon-software.com/home/ntfs-mac/
There is no such thing as "boot camp" to detect Windows. Poor language. BCA partitions. Do you want to remove XP partition? that is the tool.
Boot Camp control panel in Windows that has a Startup Disk style feature.
But "boot camp" means zilch other than installing a set of drivers and the creatiion of a partition.
Of course Lion Recvovery only works with OS X, not XP. There is a hidden feature to show all partitions and their health but nothing more.
Backup everything and rebuild and restore.

Grub not detecting Windows on RAID 0 array.

I'm having some trouble with my RAID array. I have tried to research this, but all I can find is how to install Arch Linux ONTO an array, not how to detect Windows on one, and configure grub for it. I have two SSDs in a RAID 0 configuration, which holds my Windows 7 installation. I then have two HDDs in JBOD. One of those HDDs is my mass storage drive for Windows and Linux, the other is my Arch Linux install.
The problem is that--with os-prober installed--Grub isn't detecting my Windows install. I was trying Fedora when I converted my Windows install to RAID 0, and Fedora picked up on it when I ran grub-mkconfig with os-prober installed. Grub at that point was pointing at /dev/mapper/<some random-seeming string> for Windows, and it worked.
Now that I'm back "home" to Arch Linux, I am trying to get grub to see Windows, but it never detects it. /dev/mapper/ is empty except for 'control', and /dev contains sda and sdb, which are the drives that are supposed to be in the array. At this point, I'm completely lost. I'm not even sure if this is software or hardware raid. I thought it to be hardware, because my motherboard has a RAID option rom on it, which is what I used to build the array, but the /dev/mapper stuff makes me think it's software.
Can anyone at least get me pointed in the right direction?
Thank you,
KD0BPV
Last edited by kd0bpv (2012-12-08 10:25:12)

Well, I did add ntfs to my initramfs, but it still dropped into an emergency mode terminal. I checked to make sure that it was successful, and the ntfs kernel module was loaded. Any ideas?
# lsmod | grep ntfs run in emergency shell:
ntfs 191626 0
/etc/mkinitcpio.conf:
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES="ext4 ntfs"
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options
# like so:
# FILES="/etc/modprobe.d/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect pata scsi sata filesystems"
## This is identical to the above, except the old ide subsystem is
## used for IDE devices instead of the new pata subsystem.
# HOOKS="base udev autodetect ide scsi sata filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev pata scsi sata usb filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev pata mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev usb lvm2 filesystems"
## NOTE: If you have /usr on a separate partition, you MUST include the
# usr, fsck and shutdown hooks.
HOOKS="base udev autodetect pata scsi sata dmraid filesystems usbinput fsck"
# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
The systemd journal is still showing the same errors I posted earlier.

HP pavilion dv6 fan not working

My HP PAVILIONDV6T-6100 laptop (Product no. LM720AV) is having problems with the cooling fan and overheating. I have started getting the cooling fan not functioning error at startup. When I use the laptop-the cooling fan runs almost all the time. It turns-off when I have only one application running on the laptop.
I understand that since the fan is running perfectly fine, the fan motor is still functional. Could it be dust accumulation that is causing the error and fan running continuously? Where can I get the insturctions for opening the cooling fan assembly and cleaning it? Also will I need to replace the thermal insulation after cleaning?
Thanks
Sunny

I paid $30,000 for my car but I trust the dealer to work on it because I know their mechanics do it every day. I could watch youtube videos and figure out how to do a tuneup but they will do it better. I will change my own air filter however since it is not too hard and will save money. Replacing a cooling fan is more like a tuneup than replacing an air filter. Still, you can do it if you follow the Manual and are careful. Here is the Manual:
Manual
This is the part number for your fan and heatsink:
641477-001
$63 from HP:
http://h20141.www2.hp.com/Hpparts/Search_Results.aspx?mscssid=11C544B95DEB4BC6A0D99C14917258C7&Searc...
$20 on eBay:
http://www.ebay.com/itm/New-OEM-HP-Pavilion-DV6-6000-DV7-6000-CPU-Fan-650797-001-641477-001-665309-0...
I would go ahead and run all the diagnostic tests you can access by tapping F2 and entering UEFI Diagnostics. Other than the fan what other problems are you having?
If this is "the Answer" please click "Accept as Solution" to help others find it.

Pavilion dv6 mic not detected. Windows 7 64-bit.

Similar Messages

Maybe you are looking for