Pavilion dv6, speaker buzzing starts after a minute or so when using Skype. This is a new computer

communications thru Skype are fine for about a minute and then buzzing/humming starts coming from speakers and becomes unusable. Using headset does not help. I have installed all updates and computer passes all self tests.

Hi mowall4704,
Please post your Product number (please don’t post your serial number).
What happens when you play music out of the speakers - does the same thing happen (buzzing/humming sounds come from the speakers)?
You say using headset does not help. What happens when you use the headset?
Thanks,
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

  • I install adobe acrobat 7.0 in windows 8.1 and when I try to open it I get "application was unable to start correctly (0xc00000fd) click OK to close application".  This is a new computer and all other software works fine.

    Any one run across this?

    Hi econj,
    As Acrobat 7 is not supported by Windows 8, you might need to update the supported Adobe Acrobat version.
    Please navigate to the KB doc link given below to understand the system requirements for Acrobat 7.0:
    System requirements for Acrobat Professional 7.0, Standard 7.0, 3D and Elements 7.0 (Mac, Windows and Unix for 3D only)
    Regards,
    Anubha

  • Iphone was dead when i woke up, wont start or charge and suddenly started after 10 minutes.

    Iphone was dead when i woke up, wont start or charge and suddenly started after 10 minutes.

    Try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone should restart. This can take up to 20 seconds.

  • I get "an error has occurred in the script on this page" it comes up for no reason on Firefox and I can't remove the message, it then goes away on it's own after 3 minutes? how do I prevent this message coming up? I have Windows 7.

    I get "an error has occurred in the script on this page" it comes up for no reason on Firefox and I can't remove the message, it then goes away on it's own after 3 minutes? how do I prevent this message coming up? I have Windows 7.
    I can work the screen behind the message which stays in the centre of my screen.

    Windows version is...?
    What pages are giving you problems? [post links to same]
    Are you getting the script errors only when attempting to print or...?
    Has your printer's manufacturer confirmed that your currently installed printer software is IE11-compatible (yet)?
    ~Robear Dyer (PA Bear) MS MVP-Windows Client since 2002 Disclaimer: MS MVPs neither represent nor work for Microsoft

  • I have just purchased the iPhone 5s and my previous phone was backed up on iCloud. However when I restored this on my new phone my photos are still being restored after 4 days. Shows the amount there but no pictures?

    I have just purchased the iPhone 5s and my previous phone was backed up on iCloud. However when I restored this on my new phone my photos are still being restored after 4 days. Shows the amount there but no pictures? Is there anything I can do to get them back as my other phone has now been cleared. On my iCloud storage it still shows that my previous phone had all the info still?? I'm confused!

    Many users have lost photos while preforming a restore from backup or upgrading the iOS.   Recall, only photos in the camera roll are backed up to iCloud.  There is a way to turn backups for camera roll on/off, perhaps these users had camera roll turned off.
    See:
    Settings>icloud>Storage & Backups>Manage Storage,  tap the device's name and on the next screen, be sure Camera Roll is turned on.
    IMPORTANT...
    Photos should be regularly synced to a computer (like you store photos from a digital camera) using either USB via iTunes (on a mac use iPhoto or Aperture to move them to an album) or using photo stream.  If using Photo stream, but sure to move the received photos to a permanent album.  If you have been doing that, then you can sync those photos back to your device.
    Or, you can find other apps in the app store that send camera roll photos to a service like Dropbox.
    If you haven't been saving photos except relying on iCloud to store them in a backup, then that is risky, as many users have discovered.  I'm afraid I have no advice in this case - there is no "cure".

  • HP Pavilion dv6 speaker light stays red, unable to hear sound

    I have a HP Pavilion Dv6 Notebook PC Product # QE071UA#ABA.  The light on the speaker button (F11) stays red when I tap on it, but I can see the sound bar and icon in the center of the screeen.  I am unable to use the mouse to adjust sound.  When I hover over the speaker Icon on the toolbar it says that no  speakers or headsets are plugged in. When I click on the icon, It tries to trouble shoot the problem, but itc an not  detect the problem.  I have shutdown the laptop. unplugged the AC and battery, held the power button down for 60 seconds, plugged the AC and battery back in and restarted the computer.  I have also ran a system restore back to before a critical update on 8/27/14.  So far nothing has helped.    The AMD high definition audio device states that it s working properly.   Laptop has Beats Audio.  Using Windows 7.
    Thank you for the help.

    Hi,
    The AMD driver is just related to audio over an HDMI connection - for your main audio through the internal speakers or headphones, this is provided by the IDT HD audio driver, so try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp52501-53000/sp5265​8.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device ( if it's listed ) and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shutdown the notebook, unplug the AC Adapter and then remove the battery.  Hold down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f9 to load the defaults ( this is sometimes f5, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HP pavilion dv6 restoratio​n incomplete after recovery

    I recently try to facotry reset my Hp pavilion dv6 using the recovery usb I make with the HP program when I brought this laptop, but it said "restoration incomplete". 
    I have ran the hard drive check and mem test at the BIOS and there isnt any problem. I also did a full format on the hard drive and it works. So I dont think there are any bad sector on hard drive. 
    I did factory reset, miniimze windows install...all the option I can had on the recovery problem but It doesnt work.
    Once It finish the installation and laptop is restart, it automatically boot into the HP recovery program and said "restoration incomplete".
    I am wondering how can I find my license product key so I can install a windows 7 or any other solution?
    Thank you

    Sorry no solution for you but I to have a DV6 that no longer allows the DVD drive, bluetooth, web cam, wi-di and probably a load of other things to work to work.  I've never been able to make back ups of my settings so like you want to start again. Please HP answer this question as I'd love to try Windows 7 also.  P.s. never had so much trouble with a laptop!!!!  Runs hot, can't system restore, can't use the simple things I'm used to on any other laptop!!

  • Pavilion dv6-1230us Black Screen after installing Windows 7...Please Help

    Hi,
    I recently installed Windows 7 and everything was working fine until my computer went into hibernation.   Before this, I installed all the drivers and software from the HP website for my computer for Windows 32 bit setup.  After my computer went into hibernation, my computer will not start up in normal mode; rather, it starts in safe mode only.  When its starts in normal mode, the screen just turns black and nothing happens.  The login screen comes up perfectly fine but after I login at startup, the screen just turns black.  Please help, I don't know what else to do whether it is a driver or software issue from the software from the HP site.
    Thanks,
    Daniel

    Did you check Apple Support Boot Camp article?
    iMac displays a black screen during installation of Windows 7
    http://www.apple.com/support/bootcamp/
    Installation Guide
    Instructions for all features and settings.
    Boot Camp FAQGet answers to commonly asked Boot Camp questions.
    Windows 7 FAQAnswers to commonly asked Windows 7 questions.

  • Lync Inactive Timer Not Working - Starts after 5 minutes rather than 20 minutes

    I have a client who has her Inactive timer set to 20 minutes.  I verified that the registry entry is set as such.  We have rebooted her system and cleared her Lync cache files.  She does not have a screen saver set, and her plugged
    in power setting for turning off the display is set for 30 minutes, and put the computer to sleep is Never.  Battery power options has the display turning off after 5 minutes.  Her system is plugged in and the Inactive status kicks off
    after 5 minutes and the display does not turn off.  I can not figure out why it is kicking off after 5 minutes rather than 20 minutes as it is set.  Any ideas on what else might be causing it to go inactive after 5 minutes?  Or what else I can
    try to get it to initiate the 20 minutes that it has set?

    My apologies, I didn't check the location being the 2010 forum and was hoping it might still be 2013 as we get a lot of 2013 posts in the 2010 forums.  The app doesn't currently work with 2010 which stinks.  I was thinking if it
    worked we could beef it up so it worked well for you and add some additional features.  In the end, there's no native option but it's a good idea.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications
    This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • HP pavilion/dm4 goes to sleep after 1 minute--it's a drag!

    I've checked my control panel settings and then the advanced settings (for notification icons--which doesn't apply to this problem).
    What ever I set, I'm working at my computer and screen always goes to sleep 1 minute after if I don't touch the keyboard.
    What am I not getting. I need at least 5 minutes or so before it should go to sleep. My computer at the office only goes to sleep after I make it.
    Thanks.
    Doug
    This question was solved.
    View Solution.

    THANK YOU! I'M GLAD IT WAS SOMETHING SIMPLE.

  • While using Facebook, my iPad shuts down after 5 minutes,so annoying,didn't do this before the upgrade!!

    Why does my iPad shut Dow after 5 minutes?? So annoying, did not do this before ios7.

    Have you reset the device? Hold down the home button along with the power button until you see the Apple, then let go. You can also try Settings > General > Reset > Reset all settings

  • How can I stop iPad from starting the music app after ending a phone call when using Bluetooth headphones?

    music app automatically starts after using Bluetooth headphones during a phone call

    If you don't have iTunes you will need to buy the song from the iTunes store and download it that way. If it is a custom track you may be out of luck.  The only way to get a song on your device without iTunes involves jailbreaking it. 
    iOS is set up to prevent people from emailing each other songs, videos, movies, books, etc. This is how Apple got their contracts with the content providers by promising that they would do what ever it takes to prevent people from sharing content that they didn't pay for.

  • Ipad camera app not working after update 7.1.1 and using skype on video call

    Hello,
    i updated my mini ipad to ios 7.1.1
    then i used skype for video call...
    It worked fine for a few minutes then the front camera stopped working
    Stopping skype and starting the camera app, i saw that the front camera was no more working...black screen
    instead rear camera was working...
    Then i tried to reset the device (pressing sleep and home button) and uninstalled skype
    Now front camera works more or less, but the camera app seems always almost freezed, i cant change easily the options,
    i cant record a video, only camera for snapshots is working...
    any suggestion?
    is it possible to uninstall the camera app and try to reinstall it?
    Thanks!

    Updating to iOS 7.1.2 doesnt solving problem at all, even my front camera also begin not working after I did that. Everything's OK when I using rear cam, but just freeze and blurred on screen while switched to the front cam. And have to resetting to go back to rear cam. My iPhone4's camera itself, rear and front, are in good performance before. And I've tried anything such as reset, hard reset, restoring, setting up as new device, etc, without any result since then. If some people say it was about hardware issued, I thing so weird because too many same hardware problems coincident happened at the same moment. So I just only hope the Apple will listening and solving all problems wisely. Thanks b4.

  • How to fix runtime error R6034 when using Microsoft Vista on an HP computer.  Started with the last itunes update.

    Problem started after loading last itunes update.  Uninstalled itunes from my HP but still getting error message when I start up the computer. Is there a new update on itunes?

    Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
    http://www.apple.com/itunes/download/
    (The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
    Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
    If you still have the same error messages cropping up, then try the procedures from the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Can't find previous itunes file after moving info to an external drive to move library to new computer!!!  HELP

    I have moved my itunes files numerous times to new computers as I get one.  This last time I had everything running off an external drive, to conserve hard drive space on computer and hopefully from computer failure.  I need to move library over to new computer and get away from old computer that has Windows XP to the computer with windows 7.  After installing itunes on new computer and plugging in external to new computer, it finds all music and movies, etc., however, I can't seem to find the file that has the playlist info, play count, and to see where the backups of my iphone(s) are.  I have been working at this for days to no avail.  It may be right in front of my face but can't see where to find it.  HELP!!!!

    Hi mechellr!
    Here is an article for you that explains in depth how to move your iTunes library from one computer to another:
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/ht4527
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

Maybe you are looking for

  • How do I know if my IPhone 4S is unlocked or not?

    I have an IPhone 4S running OS 5.1.3- I think. I am just curious to know how to determine if it is unlocked. I am a current ATT customer. Thank you

  • Telnet problem of Cat6509 with CatOS 6.4 (8)

    When telnet to a Catalyst 6509 with CatOS 6.4 (8), first nothing appeared, then press enter, showed the screen with 2 "Enter pasword:". This behavior prevent Cisco works from updating configuration to these devices. Does anyone have the idea how to r

  • Windows could not display the images available for installation

    I am trying to perform unattended installation of windows which I created with Windows AIK. When I add answer file on USB's with windows installation root I get "windows could not display..." message. Problem is there even when there are just a few s

  • Order of songs on the ipod

    My 3rd gen ipod is set up so when I go to Songs the songs are in numerical and alphabetical order. When they show up in iTunes 12 they are no longer in that order and when I added a song to the Songs it trashed the order to look like the order as see

  • Exporting raw XDcam clips for non-user

    I need to export some raw EX-1 footage for a user that doesn't have FCP and works on Windows XP. I found a similar question and a possible answer: http://discussions.apple.com/thread.jspa?messageID=10741386&#10741386 Is there another way via FCP that