Pavilion dv6 wont start after factory recovery.

Hello,
I made factory reset using HP recovery manager ( try both: clean copy or factory default copy with software), and the process finish ok. But after restart windows cant start and stuck on windows logo, if I try safe mode, it stops at message: "You cannot finish the instalation in safe mode restart the PC and finish the installation" . It seems that the "first time use" installation process is corrupted. The HDD and memory tests finish without error. Also tried the Hard reset (Unplug the AC remove the battery and hold power on for 30 sec.) but did not help.
Thanks for help.
OS win7 home premium.
PN: QF448EA#BCM.

Hi @Fil23 ,
Thank you for visiting the HP Support Forums and Welcome.Thank you for all the information that you are seeing, a big help.
I have looked into your issue about your HP Pavilion dv6-6155ec Entertainment Notebook PC and issues getting past the HP Logo screen and then going into a loop.
Please note remove any and all USB devices. Disconnect all non-essential devices, as these could cause some issues.
Here is a link on computer does not start, which has a section for the HP Logo screen.
You could reset the BIOS with this document selecting the reloading the BIOS default settings.
Hope this helps you out.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

My System wont start after setting FSB to 200

My System wont start after I'd set my FSB to 200,
when the system starts, nothing comes up, and my Pc screen LED just blinks,
I have tryed to reseting the Bios but it doesn't help, have also tryed with new RAM and new Graphiccard but it doesnt help.
Please help me:-(
Am I resetting the Bios wrong? I set the jumper to safe mode and 100mhz, then I use the jumper to clear the CMOS. And the restart at set the jumpers back
3ghz AMD BARTON
NVIDIA nforce2 k7bn2 Delta
512 DDR RAM PCI3200
300WATT

Quote
Originally posted by roobster
set the multiplier lower , FSB(200) X multiplier (ex.10.5) = 2100 MHz , and your voltage raise it a bit too let say 1,700 ( default is 1.650 ) If this doesn't work at once , keep booting . My rig started up after 5 times . Strange but true .
does not work if he has a 3000.
they are multiplier locked.

Intel imac wont start after changing permission

intel imac wont start after i changed my hard drive permission to let me read and write, then i clicked apply to all enclosed files.i turned it off no problem. then it never started up again in os x. the grey screen with apple logo appears,then after a minute it restarts, and will keep doing that if i let it. i can start up in windows xp, but i dont know how to do anything in windows xp that will affect os x. i can use the hard drive in target mode, but i cant figure out how that can help me. i use a macbook to view target disk. ive spent hours looking through help and support. finally i do not have the os install disks. PLEASE HELP!

My apologies for the inept instructions.
Restart normally. Open Terminal in the Utilities folder. Paste the commands in the Terminal application to avoid typos:
sudo su
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen. Press RETURN again. Now paste each of the following at the prompt and press RETURN after each.
chown root:admin /Applications
chmod 0775 /Applications
chown root:admin /Library
chmod 1775 /Library
chown root:admin /System
chmod 0775 /System
chown root:admin /Users
chmod 0775 /Users
chmod -R -N /Applications
chown -R :admin /Applications/*
Again, my apologies.

Portege Z930-118 wont start after BIOS update

my PORTG Z930-118 failover and wont start after i upgrading in middle of upgrade i remove power and press shutdown bottom after that i see the power and wireless but screen still black ?
Any help please

Hmmmm.... BIOS upgrade interruption has screwed up BIOS and thats the reason why your notebook doesn't start properly. BIOS is damaged now.
In such case you need professional help by authorized Toshiba service provider.
On this forum you can find many threads about similar problems. Some people have tried to fix this alone and if you are interested to read how one other forum user has fixed it check please this thread.
Ayway, you can contact nearest Toshiba service, explain the situation and ask for help.

770-G45 wont start after ShutDown

Recently installed MSI 770-G45, problem starts when i regulary shutdown comp. from WinXP or Win7 64-bit.Computer wont start after that, like ther is no power, fans dont spin, no bips, NOTHING. I got to unplug power cord and plugg it again into psu, after that it starts normaly.
Strange thing is that computer starts normally when i manualy shutdown system(holding the power button on the case).There is no exception, starts perfectly evry time after manual shutdown, no need to unplugg powercord.
Rest of my components> Phenom II X2 555BE, Kingston 2GB 1333mhz, Sapphire 5770, HDD WD 250gb,PSU Corsair TX 650w.
Tried to change power cord, tried other PSU, other case (tought its maybe power button but no), changed mobo battery, installed several OS versions (XP, Win7) and still dont have solution.
MS 7599 ver. 2.0
Bios version 10.2
MoBo is new bought it 3 days ago.
PLEASE HELP!!!!!

First: It is important to clear CMOS after a BIOS update. Unplug power cable before the clearing, as there can be no power in the system
Second: Rebuild the system, but outside the case. Use only PSU, motherboard, processor, one stick of memory and graphics card. If it works better then, you may have a short, from a stand-off too many, or poorly isolated wire somewhere.
But I second it sounds like a motherboard problem. You'd better contact the one who sold it to you.
Oh, an oldie thing! You will need to install Windows again, with the new motherboard and all.

SSMS wont start after Installing SQLServer

Hello,
After SSMS wont start after updating VS2012. I have unistallled and installed a number of times but the error message I keep getting indicates that Visual Studio shell Isolated is missing. I have tried to install this directly from the set up dvd but
no success.
Also I noticed that VSShell is missing in the C:\Program Files (x86)\Microsoft SQL Server\120\Tools\Binn.
I am assuming that this has something to do with it.
Can someone please tell me how to fix this?
Thank you.
here is the error message received

Hi,
Try the below solution and see how it works.
Note: Take a backup of the key before make any changes on the registry keys.
http://support.microsoft.com/kb/322756
Start regedit.exe
Go to HKEY_CURRENT_USER\Software\Microsoft\SQL Server Management Studio
Delete 12.0_Config
Restart ssms.exe
Here is the original thread:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/aeff13b3-3960-4724-bb9a-7e585651d7f4/sql-server-2012-error
Thanks.
Tracy Cai
TechNet Community Support

Safari wont start after i installed avi player any suggestions?

safari wont start after i installed a avi player any suggestions?

You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

HP Pavilion dv6: Can not find a Recovery Manager

HP Pavilion dv6
Windows 7 Home Premium
I want to create Recovery disc but I am not able to locate recovery manager. I tried downloading and installing from below link, but didnt work.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=ob-75985-1
Also, my windows got corrupt once, so i reinstalled it with external windows CD with my windows product key and I still have recovery partition on my hard disc.

When requesting assistance, please provide the complete model name and product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of your computer, inside the battery compartment, or on the BIOS setup screen. Please DO NOT include your serial number. Enter the model/product information into HP's Online Consumer Support page and post it here for our review.
If you installed a generic copy of Windows 7 on your computer prior to creating your personal HP Recovery Discs, you may no longer be able to do so. If the "HP Recovery" partiton still exists on the hard drive and hasn't been damaged, please use the Windows Disk Management Console to mark or set the HP Recovery partition as active and reboot your computer. Please see HP - Partitioning and Naming Hard Drives (Windows 7) for information about using the Windows Disk Management Console. Upon rebooting, the computer should start the HP Recovery process. After recovering the computer to a factory like state, you should be able to create your personal HP Recovery Discs.
If this doesn't work, please contact official HP support in your region / country via the HP Worldwide Support Portal, to see if HP Recovery Media is available for your computer.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Computer wont work after full recovery

Hi, my computer wont start up. I have recovered it back to factory twice & it worked fine after each but only for a day, then same old problem back of not starting.
I have done an FULL smart test on Hard drive but it says 'passed' (no fault).
I have done diagnostics numerous times (5 or 6) and it passes all tests apart from once it said error code biohd-4 but after second recovery this hasnt come back??
I understand that if it was permantly giving this fault code then it would suggest hard drive but is it possible it could still be hard drive without this fault code showing??
Would really appreciate your help here as this is so time consuming & is driving me nuts!!

Hello,
What is the computer model that you have, can you please let me know?
The HDD might not be dead, but would need that info.
Can you try to remove the ac adapter and keep the power on button pressed for 30 seconds? Then turn the PC on again.
Thanks,
I work for HP! Please remember to provide and if this helped click ON

Windows Update 80072EE2 after Factory recovery

Hello everyone!
I just did a complete factory recovery on a Lenovo 3000 K100, with Windows Vista Home Premium 32bits.
The recovery was successeful. (I used the Recovery partition that came from the Lenovo)
The device manager has nothing wrong.
But when I try to do a Windows Update, I have the error 80072EE2
Installed Microsoft Security Essentials, and when triyng to update it, the update fail, telling me that the connection timed out. (please note that I was able to download it online)
I can surf on the web, go on different websites, but when I go to Microsoft website, it takes time before the webpage loads sometime!
Some people said that I should remove the UseWUServer (HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU) from my registery, but this key is missing in my registery. I cannot find it.
So, tried other fixes suggested in forums, like reset my internet settings (but it's a fresh windows install)
Tried in cmd "net stop wuauserv" and then "start" ... the service is running normally...
In services, Windows Update is on Automatic (Delayed) Running. (I even changed it to Automatic)
I renamed the Hosts file, and flushed the DNS. The Hosts file should be generated automatically after being removed.
There is no Third party Firewall. The only antivirus installed, is Microsoft Security Essentials.
There is no softwares installed after the Factory Recovery.
I tried to ping www.google.com, and there is 25% loss, with a connection timed out, after two responses.
There is a 100% loss when I ping microsoft.com, with a connection timed out.
I tried to disable WIndows FIrewall, but doesn't solve the problem.
I reset Internet explorer settings again... Nothing is solved.
There is no PROXY in the LAN Settings, of Internet explorer...
Uninstalled the Network drivers (in device manager), and reinstalled them... problem not solved...
So, does anyone have an idea? I'm out of solutions...
What's weird is that it's a Fresh Factory recovery, it should be free of issues... ??

http://support.microsoft.com/?kbid=836941
This might be a dumb question, but did you try to let MS fix it automatically?
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

After factory recovery HDD is only partly recognized

Hi,
Could someone please help?
After a full factory recovery my Pavilion dv7 netbook does not recognizes its HDD well. It shows the hdd's size is only 92GB instead of 931GB. Check shows everything is Ok. Attached a screenshot below. Any idea why is that and how to fix it?
Thanks a lot.
Solved. Cheers.

it might be worth checking to see if the ipoddriver.kext has gone skunky on your Mac. for some more info about the symptoms of that, see:
iTunes 7 for Mac: Restore option is not available
iTunes: No Photos or Videos tab in the iPod preferences pane in Mac OS X
iPod does not appear in iPod Updater or iTunes in Mac OS X

My hp pavilion 7955 wont start only a beep

my hp 7955 worked for a few days after 2 years without use. First time after that it worked after I shook it a few times , now it wont start only prolong beep. fan and hd fan working ok

my hp pavilion 7955 at first had a beep then change memory card downloaded sp pack 3 now it starts then stops

Iphone 5 wont start after standby

My iphone 5 screen went with blck/wite vertical stripes. After one month going to flat battery and charging it restarted. Now every time goes to standby it wont start. Only by rebooting. Does anyone know how to fix it? Is it a iOS 7.0.6 sw problem? YOur help is very much appreciated as my phone is out of warranty for a month :-(

Hello Duartesilva,
It sounds like you are unable to turn the phone back on normally and must reset it to get back to your home screen. I recommend starting creating a backup of your device to iTunes with this article:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
And restore it from your backup with this article:
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
If it is a software issue, these steps will resolve it.
Thank you for using Apple Support Communities.
Cheers,
Sterling

HP Pavilion DV6-3340et bios failed, bios recovery or restore

HP Pavilion DV6-3340et bios failed. My screen is always black. Computer doesnt start. How can I recover my bios from usb?
Do you have bios rom files for usb?
Can you tell me, How to recover bios, which method and files? xxx.fd, xxx.bin, xxx.rom, xxx.sig etc.
Please help me. Now from thanks.

HP document on restoring the BIOS:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02693833&tmp_task=solveCategory&cc=us&dlc=en&lc...=
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Can't install itunes on XP after factory recovery

hi everybody,
This is a bizarre issue that became a problem. on a t500 after a xp factory recovery, update OS, install normal app, office, qbooks, etc.. I download iTunes 8 last version, double click to install and the first weird sign was a message to run but said “unknown publisher “ after click run, nothing happens. It won’t do anything. It won’t log anything on system or app logs. User has admin local priv, I tried install on local comp, safe mode, different local user, domain admin. Nothing. Last thing I tried was download iTunes version 7 and it did install, but I need the 8 because prior library setup.
Does anybody have a clue?? Is driving me crazy.
Thanks a lot.

Welcome to lenovo user forums!
Have you tried the in place upgrade functionality of itunes?Make sure that you select only itunes from the "available updates " list.
Otherwise it will also install safari
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Pavilion dv6 wont start after factory recovery.

Similar Messages

Maybe you are looking for