Pavilion DV6000 - Lightscribe and audio (on screen touch etc.) isnt working.

Hi guys!
I am the owner of a HP Pavilion DV6000, and the other day, HP On Screen touch display starts crashing,
which causes the audio to fail aswell.
Although this is not the only problem. Now the lightscribe CD drive doesnt work either.
If this occourred the same day i dont know. I have search allover for a fix and it seems like theres alot of people with the exact same problem, but without a solution.
Ive also tried searching for drivers and so, on HP´s site but i cant seem to find my model (DV6000).
I hope you can help!
Kind Regards
M. Wittrock

Hi,
Check this document page 146 (speaker assembly).
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Similar Messages

I am facing a new problem after a missed call. i phone will get freez on its lock screen after a miss call. Its seems that its main screen touch is not working properly. This problem occurs after each and every missed call.

I'm using iphone 5s with ios 7.1.2 & I am facing a new problem after every missed call. i phone gets freezed on its lock screen. It seems that its main screen touch is not working properly. It should be bug introduced by apple . This problem occurs after each and every missed call .There is no patch announcement for this issue yet. There are few workaround to fix this issue: Reboot your iphone. But its irritating to reboot the phone frequently after each issue....

Hello dipthebe,
Check out the articles below go through troubleshooting steps for your iPhone when the screen is unresponsive. You may want to try and restore your iPhone as a new device and then test out what happens when you miss a call to see if the issue is still present afterwards.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Regards,
-Norm G.

M30 - Front Mode and Audio/Video Control buttons don't work

Hi
The Front Mode and Audio/Video Control Buttons Don't Work
Any ideas?
Thanks

Hi
As far as I know the Toshiba Controls utility is responsible for key usage.
Did you try to install Toshiba Controls?
Check the Toshiba driver page for this driver.
Bye

Using a first gen iPad. Video and audio from internet sites simply stopped working all of a sudden. Any suggestions? Thanks.

Using a first gen iPad. Video and audio from internet sites simply stopped working all of a sudden. Any suggestions? Thanks.

1)access the router web ui
2)go to the Mac Address Clone subtab , enable it and click "Clone" . Save the settings
3)do a power cycle
4)check whether the router gets an internet ip add now ..

I have a hp pavilion dv4-2160us and the dvd/cd reader is not working. it can't detect the disk too.

I have a hp pavilion dv4-2160us and the dvd/cd reader is not working. it can't detect the disk too. i've done everything on the hp website to fix it (reinstall the driver, etc.), but nothing seems to help. can anybody help me with my problem? thanks!

When you say DVD drive is not working and cant detect disks, Is the Optical drive listed in Device manager and My computer? Is not reading any specific disks or all kinds of disks ?
Also have you tried all possible troubleshooting steps found over here
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

My pinch zoom-in and out in my Macbook Air isnt working. Help!

Can someone please help me.. my pinch zoom in and out in my macbook air isnt working. It happened about 2 weeks ago, in the settings all the zoom preferences are checked so i dont know whats wrong with it. The pinch zoom is the only thing not working, the double tap zoom and all the rest of the capabilities of my trackpad are working properly. I called apple but they couldnt help through the phone and wants me to pay $19.99 for a one time help.. Please help!

I've also noticed that the iPhoto zoom is erratic. Sometimes I try to use the trackpad to zoom, but the image just blurs for a second instead of zooming in.
I experimented a little and found that it helps, when zooming in, to make sure that your two fingers are very close together when starting.

I took my Pavilion dv6000 apart and now the sound isnt working

So here is the situation...
My fan has been making noise so I wanted to clean out all the dust from inside my Pavilion dv6000. (But that isn't what i need help with right now.) So after I took it all apart and put it back together, I had this problem with turning the computer on. I think it had to do with this little ribbon cable that wasn't going in the spot where it had to be (it was connected to the power button chip.) I finally got that ribbon where it was suppose to be, and tried to turn it on. It still didnt start. The battery light would go on when it was plugged in, but nothing happened when I pushed the power button. I finally decided to give up and clean the finger prints off of it so I could bring it to my IT teacher tomorrow. While cleaning it, it all of a sudden turned on. I dont know what happened. It just turned on by itself. I mean, I could have pushed something while cleaning it, or maybe something was loose and tightened while i was cleaning it. But anyway, I finally got it to turn on. Now while doing homework, I notice the sound isnt working. I really dont want to take it apart if i dont have to becuase this is the last week of school and I need these practice tests that I put on my computer. I was wondering if there is anything I can do to possibly fix my audio without taking it apart. I was thinking if i check for the latest driver maybe that would help, but i have the latest driver and the sound still doesnt work. So does anyone know how I can fix this without taking it apart? If not does anyone know how I can fix it if i do take it apart? (for example, things to check to make sure they are connected or tightened?)
Thanks for your time and help, I really appreciate it.

Hi,
Check this document page 146 (speaker assembly).
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

HP Pavilion g7-2325sb Windows 7 64bit screen adjustment keys not working

Hello,
I have a HP Pavilion g7-2325sb running Windows 7 64 bit. but the buttons for adjusting screen brightness don't work.
The buttons for audio adjustment do work without pusshing the fn button.
In bios "action keys mode" is enabled.
I think it's some software missing but can't find the software, neither can "HP support assistant"
Does anybody know where I can find the driver or is there another problem ?
Greetings,
Thersko
This question was solved.
View Solution.

You're very welcome.

I upgraded my os of itunes and now my ipod touch won't work

I upgraded the itunes to the newest os 5.0 and now my ipod touch won't register or even turn on, I get the initial screen that shows you to plug it in to the computer and then nothing happens

i have the same problem. I tried to upgrade this morning to iOS 5.0.1 and now my ipod touch is completely frozen. All I get is a black screen with the Apple logo and an empty download bar. I'm not even able to turn off the ipod and iTunes doesn't detect it anymore. Any suggestion except returning the ipod to Apple Store?

I am trying to edit a .mov video in Premiere Elements 12, but the video and audio do not sync. They work fine when played in Quicktime.

Hello,
I am trying to edit a .mov video in Premiere Elements 12, but the video and audio do not sync as soon as I load it into the program. It appears to work fine in Quicktime.
Thanks in advance.

mbgoodwi
Thanks for the reply. This is the plan.
Open Premiere Elements 12/12.1 to the Expert workspace.
In the Expert workspace, go to File Menu/New/Project and Change Settings.
In the Change Settings area, select the project preset
NTSC
AVCHD
AVCHD LITE 720p30
OK out of there. In the New Project dialog that appears, note that it has your new project preset named.
Be sure to put a check mark next to "Force Selected Project Setting on This Project". And, then OK out of there.
Back in the Premiere Elements 12 Expert workspace, use Add Media/Files and Folders to bring your video
into Project Assets. From Project Assets drag your video to the Timeline Video Track 1/Audio Track 1.
Is there an orange line over the content in the Timeline. See screenshot for orange line to which I am referring.
There should be no colored line over the content if the project preset matches the video properties. But, if you do see
that orange line, then render the Timeline content by pressing the Enter key of the computer main keyboard or press
the Render button above the Timeline.
Do your video/audio now play back in the Edit area monitor in sync?
Please let us know the result, and then we will decide what next.
Thanks.
ATR

Why does my Iphone 4S and my sons Ipod touch (4g) no work with the Sony XDR-DS12iP after IOS upgrades?

According to Sony my apple devices are compatible - and they used to work.... Since IOS 5 Upgrades they no longer play music through the docking systems speakers. They charge, but they refuse to play. Why? What have you done Apple to mess these expensive devices up? My eldest son's Iphone 4 works ok.
http://pdf.crse.com/manuals/4199738141.pdf
This says that the Apple devices are compatible and supported.
Come on Apple - I would like answers as to why I have two devices that were designed to work with your gadgets that did work but no longer do!!
Why? Why? Why? Why??

My iphone 4s & Ipad are also having the same issue for my phone I did find this solution that seemed to work - only for my phone though:
go to: settings>general>accessibility turn on "assistive touch"
tap on the the new icon that appears on the screen (top left side -the black square w/a white circle inside)
go to "device"
I found my device was muted so I tapped it to unmute - I have had to do this a few times, but it does seem to resolve the immediate issue. Try it - but apple needs to come up with a solution SOON

Hp pavilion a1250n says multimedia audio controller not installed, sound not working (windows7)

No sound plays with my logitech ls11 speakers. my computer is a hp pavilion a1250n, running windows 7, 32 bit operating system, and a AMD ahtlon(tm)64 x2 dual core processor 3800+ 2.00 GHz
When i click the speaker icon in the lower right corner, and open the playback devices, it says:
Speaker: anvsoft virtual sound device, default device.
When i ran a troubleshooter, to see if there were any files I should install, i got an error message:
multimedia audio controller couldnt not be installed, driver not found.
In device manager, below the sound video and game controlers tab, it says Anvsoft virtual sound device.
Bellow the other devices tab, it says multimedia audio controler, but there is a yellow triangle exclamation makr over it.
How can I get sound on my computer? Are there any free programs that are compatible that will allow me to have sound?
Thanks to anyone who takes the time to read this.

Hi:
Click on the link below. Accept the agreeement. Download, unzip and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=23&PFid=23&Level=4&Conn=3&DownT...

My screen suddenly went out, yet the computer is still running. It would turn on but the screen would not light up at all. A service guy plugged it into an external monitor and now the screen appears to be working fine. Anyone else have this happen?

should have typed in here...

If your computer is a 2011, you can stop the blue screen by turning off graphic card switching. Under apple, system preferences, energy, uncheck box. Temporary fix. Your logic board may need to be replaced if you are under warranty or have apple care otherwise $1000.00. May be software or firmware problem but apple has provided no info. Replacing logic board has corrected problem for some users and not others. Everything I've mentioned only applies to 2011 MBPs.

I have an iPhone 4 updated to iOS 6 and the autorotate screen feature doesn't work now. How can I fix that?

I have upgraded my iPhone 4 to the iOS 6.0.1 and cannot figure out from where I can set Autorotate for the screen. Any ideas?

The iPhone is not supported on at&ts go phone network.
Contact AT&T to troubleshoot.

Left side of my screen touch isn't working !

The left side of my screen isn't responding to text. Letters like a, w are impossible to type and cannot access any of the icons on the left side of the screen. I went to apple and they said its an hardware issue and I'd have to pay $200 to replace my screen. But then I was reading through some of the discussions and people said how they had a loose cable issue and they fixed it. I'm out of warranty too so if I did have a loose cable connection would it be free of charge ? Because I'm considering going back to the apple store to have a chat with them again.

wgwgw wrote:
I'm out of warranty too so if I did have a loose cable connection would it be free of charge ? Because I'm considering going back to the apple store to have a chat with them again.
Apple does not repair phones, they exchange them. As yours is out of warranty, you can get an out of warranty exchange for $200, which is what you were offered the first time around "to repair your screen".

Pavilion DV6000 - Lightscribe and audio (on screen touch etc.) isnt working.

Similar Messages

Maybe you are looking for