Pavilion dv6z notebook - shut down a few seconds after pressing the power button
Pavilion vd6z powers up for 5 seconds (I see the HP logo screen and the Windows startup asks if it should launch the Repair or Start Normally) then it shuts off.
I have removed the battery/disconnected the adapter and held the power button in for over a minute several times, removed and replaced the memory, blown the dust from the cooling fan & heat sink. I also have tried booting with the hard drive removed. The same issue exists if I have the battery in or not. After all of the these steps, the system still starts up and then powers off after just a couple seconds.
If I press ESC to enter SETUP, the system will still power off.
The warranty expired a few weeks ago and HP tech support can not help me...other than suggesting that I put a post on the forum.
Has anyone experience a similar problem and found a solution?
Hello again visionpga.
If you've used known working memory and the problem still exists then you've ruled out many of the causes as you've tried testing all the hardware which you can test. I believe you're experiencing a motherboard issue which is likely a short. This repair is possible for you to do yourself if you have technical experience or you could have the notebook repaired by HP.
If you want to try repairing the notebook yourself I'll need your product number. This document shows how to locate the product number.
The US/Canadian number for HP Support is 1-800-474-6836. If you're in another country you'll need to visit HP Support Worldwide to locate the contact information.
If you have any other questions just let me know.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.
Similar Messages
-
IPhoto keeps shutting down a few seconds after I open it. What is wrong?
My iPhoto shuts down a few seconds after I open it. It sys there's problems to repair, then it repairs the problen, then a few seconds later it shuts down. What can I do?
Post the first 50 lines only of the crash report
Regards
TD -
My iPad 2 won't charge and it's completely shut down. I've tried pressing the two buttons simultaneously, but nothing works. It's driving me crazy! Any offers of suggestions would be greatly appreciated. Thanks!
1. The most efficient way to charge an iPad is with the charger that came with the iPad and having that plugged into a wall outlet. Trying to charge while connected to a laptop often doesn't work because the USB port may not provide enough power.
2. Once an iPad battery has completely drained it may take an hour or more on the wall charger before the iPad responds. So after an hour on the charger reset the iPad. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.
3. If the iPad still does not start up make an appt at the Apple store. It will be far better if you have an appointment rather than just walking in because those with appointments will be taken care of before you are. -
my mac os x version is 10.7.4 i am being unable to shut down my mac unless i press the power key. pls help me ....
No, but you do at least have to buy Snow Leopard. Whether you can run it depends on what iMac you have:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
Whilst Apple have withdrawn Snow Leopard from download, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $30. You can also purchase the code to use to download Lion from the same number.
If you are outside the US call your national Apple Helpline:
http://support.apple.com/kb/HE57 -
I have a mac book pro running Lion 10.7.4 and every time I use Google Earth The computer crashes by lowering a black curtain and then asking me to hold the power button down until it closes and press the power button again to restart it. Can I fix this? It bugs me when I'm looking at real estate.
I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen. -
I think it happens everytime I try to open safari right away, but I'm not sure. After shutting down it automatically restarts and gives me a message Ÿour computer had to shut down because of a problem, press any key to restart..." and when it comes on again it gives me an option to send an error report to apple.
Any ideas?
ThanksYeah your Mac is having a Kernel Panic and the option to Restart the system when that happens is checked. So the system Restarts Automatically. Uncheck that option. For some unknown reason it is located in the Energy Saver applet in System Preferences.
As to the ROOT cause it could be software or hardware problems. There should be a Kernel Panic report in the console logs.
But if you do a search of these forum you'll find many that are having these restarts waking from sleep. So it would seem to be a hardware problem. -
Why does it shut down a few seconds after turning on
I just did the most recent update for my Macbook Pro ( I am posting this message with my older macbook pro), and after the update finished, now when I turn on the unit, the pinwheel spins for about 20 seconds, then the unit shuts off. I am unable to interrrupt it and get it to open to any screens.
Try to start in Safe Mode: http://support.apple.com/kb/ht1455
See if you can get in that way. -
What does it mean if my computer turns on and automatically shuts down a few seconds later?
I tried to restart my desktop but every time it tries to reboot, it automatically shuts down within 30 seconds. Is there an easy resolution for this or do I need to bring it in?
Mac OS X Help
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Get Help with your Product
http://docs.info.apple.com/article.html?artnum=304725
Startup Manager: How to select a startup volume
http://support.apple.com/kb/HT131
Troubleshooting: My computer won't turn on
https://support.apple.com/kb/TS1367
Symptoms
If your Macintosh computer won't turn on, here's how to troubleshoot it. Please keep in mind that although your computer may display similar symptoms that prevent it from showing video, this article discusses what to do if the computer won't turn on, meaning that when you press the power button:
You don't hear a startup chime.
You don't hear any fan or drive noise.
The power button or power indicator doesn't light up at all.
If your computer doesn't display any video, it may display one or more of these similar symptoms when you press the power button:
You may hear a startup chime.
You may hear fan or drive noise.
You may see the power button or power indicator light up.
If any of these conditions occurs, see Troubleshooting: My computer has no video instead.
If your computer won't turn on, try each of these steps:
Make sure that the power cord is plugged into a working wall outlet, and that it's properly connected to the power adapter. (To check if the wall socket is working, plug in a lamp or other electrical device.)
Make sure that the power adapter is properly connected to the power port on the side or back of the computer.
Disconnect all accessories that are plugged into the computer, such as a printer, hub, or other mobile device.
Reset the computer's PMU, SMC, or PRAM. Refer to the instructions for your model:
Portable (iBook or PowerBook)
Mac mini
iMac
Power Mac
Mac Pro
MacBook or MacBook Pro
Other Mac computers
reset SMC For "Mac wont' turn on or boot" and related
https://support.apple.com/kb/TS1367 -
I recently bought mbp retina haswell 13. When i use it today suddenly my display went black....i dnt have any idea i try to press the power button then it gave beep sound. Then i press it for few seconds then it shutdown. I try to turn on again same result...plz anyone have solution for this ...help me
See Ogelthorpe's link:
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC. -
HI ....I have a new macmini 2.5 Ghz 10.7.3 Lion, had a problem today ,it froze so I could not shut down using mouse or tablet pen. used the power switch, when I tried to restart I got audible 'beeps' from it. I managed to restart it but kept getting a message come up on one ot the dual screens ' restart using the power swich to turn it off , then press it again to restart.'
This worked okay , but now it just keeps freezing whenever I start it up. I thought the issue could be my old Epson Expression 1680 scanner not being compatible , so I have unplugged it. I also had a look at the new memory I installed when I got it, but this seems not be the problem.
It is connected up to an Eizo Flexscan S2231W using a cable straight into the HDMI input , the other monitor is a small Acer using the VGA into Thunderbolt port.
When I turn the Eizo screen on first and then press the power button on the mac-mini, I hear the chime then the screen flahes the 'Digital no signal' message on and off for about 30 seconds , then the monitor comes on as normal. But it is still freezing up on me after using it for a while and I am having to use the power switch button to turn it off again.
Can anyone help please.I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen. -
MY IPAD screen is unresponsive. I tried to reset by pressing the power button for a long a few seconds but it is not responding either.
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.
I saw this report being sent to Apple:
Interval Since Last Panic Report: 581719 sec
Panics Since Last Report: 10
Anonymous UUID: F4CF708D-D85C-4EC5-8047-4FC22C6B03AF
Fri Mar 7 13:00:14 2014
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff800020c590, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x0000000007541000, CR4: 0x0000000000040660
RAX: 0xffffff8000000000, RBX: 0xffffff800d35a870, RCX: 0xffffff800cf55cd8, RDX: 0xffffff80008a8fcc
RSP: 0xffffff805e5f3d60, RBP: 0xffffff805e5f3da0, RSI: 0x000000001dcd6500, RDI: 0xffffff800d168778
R8: 0x0000000000000001, R9: 0xffffff805e5f3e88, R10: 0x0000000000000011, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff800d168770, R14: 0xffffff800d168778, R15: 0x0000000000000000
RFL: 0x0000000000010082, RIP: 0xffffff800020c590, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff805e5f3a00 : 0xffffff8000204d15
0xffffff805e5f3b00 : 0xffffff80002d1208
0xffffff805e5f3c50 :
Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f99
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.5)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Serial ATA Device: Hitachi HTS545032B9A302, 298.09 GB
Serial ATA Device: OPTIARC DVD RW AD-5970H
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x8509, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0245, 0xfa120000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd110000 / 3Hmm. The problem still may be the RAM - Apple buys the RAM it puts in its machines from third-party vendors (usually Hynix) so it could be a RAM problem.
There are a couple of things that you can do yourself before taking your machine into an Apple Store or an AASP... download and run an application named Rember that will run a RAM test for you - let it run for a couple of hours or even overnight. If it turns out that your RAM is faulty, Rember will let you know. If it is faulty, then you have a couple of options - replace the RAM yourself or (particularly if you're under warranty still) take the machine to an Apple Store or AASP and have them replace the RAM.
If Rember finds no fault with the RAM, then you'll need to take it into an Apple Store/AASP and get a free diagnosis on the machine. Three beeps do usually indicate faulty RAM, but if it tests good with Rember you likely have another problem - it could be something as simple as the RAM, somehow, not seated correctly or signs of another hardware problem.
Run Rember first... call back with results.
Good luck,
Clinton -
i am having an MacBook Pro 13inch , having an Startup Problem , the time i press the power button after few seconds the apple symbol appears with a loading sign below it and wont go further ahead of it . My data is all in the hard drive .. . I even tried the Internet recovery but no use !!!! but still no respons and the recovery and macintosh hd is now lock! but earlier only the recovery is lock and after both of them is lock. i can reinstall,... and i didnt try to back up any data bec i dont know how? so please help me to resolve my prroblem.?
luoie wrote:
This thing happend,, it say Disk utility stopped repairing "Macintosh HD" disk utility can't repair this disk
Sorry, possibly you need a new hard drive or try reformating. First
you can try something like http://www.alsoft.com/diskwarrior/ it has been known to repair disk that DiskUtility could not. YMMV and they don't give it away.
If Disk Warrior can not repair then you need to Reformate the drive. Make sure you have a back-up in place no matter what.
http://www.apple.com/support/backup/
Disk Utility will tell you something about it's SMART status: -
While I'm using safari, it will freeze up. When I force quit safari and reopen it, I find that I'm back to where I was when I did the force quit and safari remains locked up. When I try to restart the computer, I get a pop up that says that safari cancelled my restart. I then press the power button to shut down the computer. When I reboot the computer and open safari, I see all the tabs and windows that were opened when this issue began, only this time safari isn't frozen. This problem started yesterday.
Has anyone experienced the same problem? Is there a fix for this problem?Try Resetting Safari: Open Safari. Cick on the name Safari in the menu bar. In the drop down menu click Reset Safari.
-
A few seconds after start the GDM mouse stops working
After today's update I have the following problem: a few seconds after start the GDM mouse stops working. XDM doesn't work.
Edited: Mouse works. Only pointer does not move.
lscpi says:
00:02.0 VGA compatible controller: Intel Corporation 82946GZ/GL Integrated Graphics Controller (rev 02)
gdm says:
usb 2-2: new low speed USB device using uhci_hcd and address 4
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6
generic-usb 0003:04B3:310C.0003: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2/input0
[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -11 (awaiting 1071 at 650, next 1076)
(this line is repeated several times:)
[drm:i915_do_wait_request] *ERROR* something (likely vbetool) disabled interrupts, re-enabling
[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -11 (awaiting 1079 at 650, next 1080)
[drm:i915_reset] *ERROR* GPU hanging too fast, declaring wedged!
[drm:i915_reset] *ERROR* Failed to reset chip.
/var/log/Xorg.0.log says:
[ 23.129]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 23.129]
X.Org X Server 1.9.3.901 (1.9.4 RC 1)
Release Date: 2011-01-07
[ 23.129] X Protocol Version 11, Revision 0
[ 23.129] Build Operating System: Linux 2.6.36-ARCH i686
[ 23.129] Current Operating System: Linux mariuszch 2.6.37-ARCH #1 SMP PREEMPT Sat Jan 29 19:40:04 UTC 2011 i686
[ 23.129] Kernel command line: root=/dev/disk/by-uuid/3e82e71b-7de4-406d-8da9-8101fe4a713f ro i915.modeset=1
[ 23.129] Build Date: 08 January 2011 11:27:31PM
[ 23.129]
[ 23.130] Current version of pixman: 0.20.2
[ 23.130] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 23.130] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 23.131] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 31 09:24:08 2011
[ 23.163] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 23.206] (==) No Layout section. Using the first Screen section.
[ 23.206] (==) No screen section available. Using defaults.
[ 23.206] (**) |-->Screen "Default Screen Section" (0)
[ 23.206] (**) | |-->Monitor "<default monitor>"
[ 23.206] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 23.206] (==) Automatically adding devices
[ 23.206] (==) Automatically enabling devices
[ 23.260] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 23.260] Entry deleted from font path.
[ 23.295] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 23.295] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 23.295] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 23.295] (II) Loader magic: 0x81f3160
[ 23.295] (II) Module ABI versions:
[ 23.295] X.Org ANSI C Emulation: 0.4
[ 23.295] X.Org Video Driver: 8.0
[ 23.295] X.Org XInput driver : 11.0
[ 23.295] X.Org Server Extension : 4.0
[ 23.296] (--) PCI:*(0:0:2:0) 8086:2972:17aa:1015 rev 2, Mem @ 0xd0000000/1048576, 0xc0000000/268435456, I/O @ 0x000018c0/8
[ 23.296] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 23.296] (II) LoadModule: "extmod"
[ 23.306] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 23.314] (II) Module extmod: vendor="X.Org Foundation"
[ 23.314] compiled for 1.9.3.901, module version = 1.0.0
[ 23.314] Module class: X.Org Server Extension
[ 23.314] ABI class: X.Org Server Extension, version 4.0
[ 23.314] (II) Loading extension MIT-SCREEN-SAVER
[ 23.314] (II) Loading extension XFree86-VidModeExtension
[ 23.314] (II) Loading extension XFree86-DGA
[ 23.314] (II) Loading extension DPMS
[ 23.314] (II) Loading extension XVideo
[ 23.314] (II) Loading extension XVideo-MotionCompensation
[ 23.314] (II) Loading extension X-Resource
[ 23.314] (II) LoadModule: "dbe"
[ 23.314] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 23.320] (II) Module dbe: vendor="X.Org Foundation"
[ 23.320] compiled for 1.9.3.901, module version = 1.0.0
[ 23.320] Module class: X.Org Server Extension
[ 23.320] ABI class: X.Org Server Extension, version 4.0
[ 23.320] (II) Loading extension DOUBLE-BUFFER
[ 23.320] (II) LoadModule: "glx"
[ 23.320] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 23.337] (II) Module glx: vendor="X.Org Foundation"
[ 23.337] compiled for 1.9.3.901, module version = 1.0.0
[ 23.337] ABI class: X.Org Server Extension, version 4.0
[ 23.337] (==) AIGLX enabled
[ 23.337] (II) Loading extension GLX
[ 23.337] (II) LoadModule: "record"
[ 23.338] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 23.338] (II) Module record: vendor="X.Org Foundation"
[ 23.338] compiled for 1.9.3.901, module version = 1.13.0
[ 23.338] Module class: X.Org Server Extension
[ 23.338] ABI class: X.Org Server Extension, version 4.0
[ 23.339] (II) Loading extension RECORD
[ 23.339] (II) LoadModule: "dri"
[ 23.339] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 23.347] (II) Module dri: vendor="X.Org Foundation"
[ 23.347] compiled for 1.9.3.901, module version = 1.0.0
[ 23.347] ABI class: X.Org Server Extension, version 4.0
[ 23.347] (II) Loading extension XFree86-DRI
[ 23.347] (II) LoadModule: "dri2"
[ 23.348] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 23.351] (II) Module dri2: vendor="X.Org Foundation"
[ 23.351] compiled for 1.9.3.901, module version = 1.2.0
[ 23.351] ABI class: X.Org Server Extension, version 4.0
[ 23.351] (II) Loading extension DRI2
[ 23.351] (==) Matched intel as autoconfigured driver 0
[ 23.351] (==) Matched vesa as autoconfigured driver 1
[ 23.351] (==) Matched fbdev as autoconfigured driver 2
[ 23.351] (==) Assigned the driver to the xf86ConfigLayout
[ 23.351] (II) LoadModule: "intel"
[ 23.352] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 23.408] (II) Module intel: vendor="X.Org Foundation"
[ 23.408] compiled for 1.9.3, module version = 2.14.0
[ 23.408] Module class: X.Org Video Driver
[ 23.408] ABI class: X.Org Video Driver, version 8.0
[ 23.408] (II) LoadModule: "vesa"
[ 23.408] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 23.414] (II) Module vesa: vendor="X.Org Foundation"
[ 23.414] compiled for 1.9.0, module version = 2.3.0
[ 23.414] Module class: X.Org Video Driver
[ 23.414] ABI class: X.Org Video Driver, version 8.0
[ 23.414] (II) LoadModule: "fbdev"
[ 23.425] (WW) Warning, couldn't open module fbdev
[ 23.425] (II) UnloadModule: "fbdev"
[ 23.425] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 23.426] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 23.426] (II) VESA: driver for VESA chipsets: vesa
[ 23.426] (++) using VT number 7
[ 23.435] (WW) Falling back to old probe method for vesa
[ 23.435] drmOpenDevice: node name is /dev/dri/card0
[ 23.435] drmOpenDevice: open result is 8, (OK)
[ 23.435] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 23.435] drmOpenDevice: node name is /dev/dri/card0
[ 23.435] drmOpenDevice: open result is 8, (OK)
[ 23.435] drmOpenByBusid: drmOpenMinor returns 8
[ 23.435] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 23.435] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 23.435] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 23.435] (==) intel(0): RGB weight 888
[ 23.435] (==) intel(0): Default visual is TrueColor
[ 23.436] (II) intel(0): Integrated Graphics Chipset: Intel(R) 946GZ
[ 23.436] (--) intel(0): Chipset: "946GZ"
[ 23.436] (**) intel(0): Tiling enabled
[ 23.436] (**) intel(0): SwapBuffers wait enabled
[ 23.436] (==) intel(0): video overlay key set to 0x101fe
[ 23.520] (II) intel(0): Output VGA1 has no monitor section
[ 23.587] (II) intel(0): EDID for output VGA1
[ 23.587] (II) intel(0): Manufacturer: SAM Model: 594 Serial#: 1297691186
[ 23.587] (II) intel(0): Year: 2010 Week: 1
[ 23.587] (II) intel(0): EDID Version: 1.3
[ 23.587] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 23.587] (II) intel(0): Sync: Separate Composite SyncOnGreen
[ 23.587] (II) intel(0): Max Image Size [cm]: horiz.: 44 vert.: 30
[ 23.587] (II) intel(0): Gamma: 2.20
[ 23.587] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[ 23.587] (II) intel(0): First detailed timing is preferred mode
[ 23.587] (II) intel(0): redX: 0.646 redY: 0.339 greenX: 0.290 greenY: 0.603
[ 23.587] (II) intel(0): blueX: 0.145 blueY: 0.070 whiteX: 0.312 whiteY: 0.329
[ 23.587] (II) intel(0): Supported established timings:
[ 23.587] (II) intel(0): 720x400@70Hz
[ 23.587] (II) intel(0): 640x480@60Hz
[ 23.587] (II) intel(0): 640x480@67Hz
[ 23.587] (II) intel(0): 640x480@72Hz
[ 23.587] (II) intel(0): 640x480@75Hz
[ 23.587] (II) intel(0): 800x600@56Hz
[ 23.587] (II) intel(0): 800x600@60Hz
[ 23.587] (II) intel(0): 800x600@72Hz
[ 23.587] (II) intel(0): 800x600@75Hz
[ 23.587] (II) intel(0): 832x624@75Hz
[ 23.587] (II) intel(0): 1024x768@60Hz
[ 23.587] (II) intel(0): 1024x768@70Hz
[ 23.587] (II) intel(0): 1024x768@75Hz
[ 23.587] (II) intel(0): 1280x1024@75Hz
[ 23.587] (II) intel(0): 1152x864@75Hz
[ 23.587] (II) intel(0): Manufacturer's mask: 0
[ 23.587] (II) intel(0): Supported standard timings:
[ 23.587] (II) intel(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 23.587] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 23.587] (II) intel(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 23.587] (II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 23.587] (II) intel(0): #4: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 23.587] (II) intel(0): #5: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 23.587] (II) intel(0): #6: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 23.588] (II) intel(0): Supported detailed timing:
[ 23.588] (II) intel(0): clock: 119.0 MHz Image Size: 459 x 296 mm
[ 23.588] (II) intel(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
[ 23.588] (II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
[ 23.588] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[ 23.588] (II) intel(0): Monitor name: SyncMaster
[ 23.588] (II) intel(0): Serial No: HMFZ102588
[ 23.588] (II) intel(0): EDID (in hex):
[ 23.588] (II) intel(0): 00ffffffffffff004c2d94053232594d
[ 23.588] (II) intel(0): 011401030e2c1e782ab501a5564a9a25
[ 23.588] (II) intel(0): 125054bfef80b30081808140714f8100
[ 23.588] (II) intel(0): 9500950f01017c2e90a0601a1e403020
[ 23.588] (II) intel(0): 3600cb281100001a000000fd00384b1e
[ 23.588] (II) intel(0): 510e000a202020202020000000fc0053
[ 23.588] (II) intel(0): 796e634d61737465720a2020000000ff
[ 23.588] (II) intel(0): 00484d465a3130323538380a20200026
[ 23.588] (II) intel(0): EDID vendor "SAM", prod id 1428
[ 23.613] (II) intel(0): Using EDID range info for horizontal sync
[ 23.613] (II) intel(0): Using EDID range info for vertical refresh
[ 23.613] (II) intel(0): Printing DDC gathered Modelines:
[ 23.613] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 23.613] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 23.613] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 23.613] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 23.613] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 23.613] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 23.613] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 23.613] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 23.613] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 23.613] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 23.613] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 23.613] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 23.613] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 23.613] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 23.613] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 23.613] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 23.613] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 23.613] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 23.613] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 23.613] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 23.613] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 23.613] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 23.614] (II) intel(0): Printing probed modes for output VGA1
[ 23.614] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 23.614] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 23.614] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 23.614] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 23.614] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 23.614] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 23.614] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz)
[ 23.614] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 23.614] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 23.614] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 23.614] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 23.614] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 23.614] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 23.614] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 23.614] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 23.614] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 23.614] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 23.614] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 23.614] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 23.614] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 23.614] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 23.614] (II) intel(0): Output VGA1 connected
[ 23.614] (II) intel(0): Using exact sizes for initial modes
[ 23.614] (II) intel(0): Output VGA1 using initial mode 1680x1050
[ 23.614] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 23.614] (II) intel(0): Kernel page flipping support detected, enabling
[ 23.614] (**) intel(0): Display dimensions: (440, 300) mm
[ 23.614] (**) intel(0): DPI set to (96, 88)
[ 23.614] (II) Loading sub module "fb"
[ 23.614] (II) LoadModule: "fb"
[ 23.615] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 23.628] (II) Module fb: vendor="X.Org Foundation"
[ 23.629] compiled for 1.9.3.901, module version = 1.0.0
[ 23.629] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.629] (II) UnloadModule: "vesa"
[ 23.629] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 23.629] (==) Depth 24 pixmap format is 32 bpp
[ 23.629] (==) intel(0): VideoRam: 262144 KB
[ 23.629] (II) intel(0): [DRI2] Setup complete
[ 23.629] (II) intel(0): [DRI2] DRI driver: i915
[ 23.629] (II) intel(0): Allocated new frame buffer 1728x1050 stride 7168, tiled
[ 23.656] (II) UXA(0): Driver registered support for the following operations:
[ 23.656] (II) solid
[ 23.656] (II) copy
[ 23.656] (II) composite (RENDER acceleration)
[ 23.656] (II) put_image
[ 23.656] (II) get_image
[ 23.656] (==) intel(0): Backing store disabled
[ 23.656] (==) intel(0): Silken mouse enabled
[ 23.658] (II) intel(0): Initializing HW Cursor
[ 23.673] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 23.673] (==) intel(0): DPMS enabled
[ 23.673] (==) intel(0): Intel XvMC decoder disabled
[ 23.673] (II) intel(0): Set up textured video
[ 23.673] (II) intel(0): Set up overlay video
[ 23.673] (II) intel(0): direct rendering: DRI2 Enabled
[ 23.673] (==) intel(0): hotplug detection: "enabled"
[ 23.674] (--) RandR disabled
[ 23.674] (II) Initializing built-in extension Generic Event Extension
[ 23.674] (II) Initializing built-in extension SHAPE
[ 23.674] (II) Initializing built-in extension MIT-SHM
[ 23.674] (II) Initializing built-in extension XInputExtension
[ 23.674] (II) Initializing built-in extension XTEST
[ 23.674] (II) Initializing built-in extension BIG-REQUESTS
[ 23.674] (II) Initializing built-in extension SYNC
[ 23.674] (II) Initializing built-in extension XKEYBOARD
[ 23.674] (II) Initializing built-in extension XC-MISC
[ 23.674] (II) Initializing built-in extension SECURITY
[ 23.674] (II) Initializing built-in extension XINERAMA
[ 23.674] (II) Initializing built-in extension XFIXES
[ 23.674] (II) Initializing built-in extension RENDER
[ 23.674] (II) Initializing built-in extension RANDR
[ 23.674] (II) Initializing built-in extension COMPOSITE
[ 23.674] (II) Initializing built-in extension DAMAGE
[ 23.754] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 23.754] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 23.754] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 23.754] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 23.754] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 23.754] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
[ 23.754] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 23.755] (II) intel(0): Setting screen physical size to 444 x 277
[ 24.316] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 24.316] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24.316] (II) LoadModule: "evdev"
[ 24.317] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 24.334] (II) Module evdev: vendor="X.Org Foundation"
[ 24.334] compiled for 1.9.0, module version = 2.5.0
[ 24.334] Module class: X.Org XInput Driver
[ 24.334] ABI class: X.Org XInput driver, version 11.0
[ 24.334] (**) Power Button: always reports core events
[ 24.334] (**) Power Button: Device: "/dev/input/event1"
[ 24.340] (--) Power Button: Found keys
[ 24.340] (II) Power Button: Configuring as keyboard
[ 24.340] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 24.340] (**) Option "xkb_rules" "evdev"
[ 24.340] (**) Option "xkb_model" "evdev"
[ 24.340] (**) Option "xkb_layout" "us"
[ 24.380] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 24.380] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24.380] (**) Power Button: always reports core events
[ 24.380] (**) Power Button: Device: "/dev/input/event0"
[ 24.386] (--) Power Button: Found keys
[ 24.386] (II) Power Button: Configuring as keyboard
[ 24.386] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 24.386] (**) Option "xkb_rules" "evdev"
[ 24.386] (**) Option "xkb_model" "evdev"
[ 24.386] (**) Option "xkb_layout" "us"
[ 24.394] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
[ 24.394] (II) No input driver/identifier specified (ignoring)
[ 24.398] (II) config/udev: Adding input device CHICONY USB NetVista Full Width Keyboard (/dev/input/event4)
[ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: Applying InputClass "evdev keyboard catchall"
[ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: always reports core events
[ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: Device: "/dev/input/event4"
[ 24.403] (--) CHICONY USB NetVista Full Width Keyboard: Found keys
[ 24.403] (II) CHICONY USB NetVista Full Width Keyboard: Configuring as keyboard
[ 24.403] (II) XINPUT: Adding extended input device "CHICONY USB NetVista Full Width Keyboard" (type: KEYBOARD)
[ 24.403] (**) Option "xkb_rules" "evdev"
[ 24.403] (**) Option "xkb_model" "evdev"
[ 24.403] (**) Option "xkb_layout" "us"
[ 24.411] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 24.411] (II) No input driver/identifier specified (ignoring)
[ 27.181] (II) intel(0): EDID vendor "SAM", prod id 1428
[ 27.182] (II) intel(0): Using hsync ranges from config file
[ 27.182] (II) intel(0): Using vrefresh ranges from config file
[ 27.182] (II) intel(0): Printing DDC gathered Modelines:
[ 27.182] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 27.182] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 27.182] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 27.182] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 27.182] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 27.182] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 27.182] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 27.182] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 27.182] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 27.182] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 27.182] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 27.182] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 27.182] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 27.182] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 27.182] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 27.182] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 27.182] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 27.182] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 27.182] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 27.182] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 27.182] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 27.182] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 27.256] (II) intel(0): EDID vendor "SAM", prod id 1428
[ 27.256] (II) intel(0): Using hsync ranges from config file
[ 27.256] (II) intel(0): Using vrefresh ranges from config file
[ 27.256] (II) intel(0): Printing DDC gathered Modelines:
[ 27.256] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 27.256] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 27.256] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 27.256] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 27.256] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 27.256] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 27.256] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 27.256] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 27.256] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 27.256] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 27.256] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 27.256] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 27.256] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 27.256] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 27.256] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 27.256] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 27.256] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 27.256] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 27.256] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 27.256] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 27.256] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 27.256] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 27.363] (II) intel(0): EDID vendor "SAM", prod id 1428
[ 27.363] (II) intel(0): Using hsync ranges from config file
[ 27.364] (II) intel(0): Using vrefresh ranges from config file
[ 27.364] (II) intel(0): Printing DDC gathered Modelines:
[ 27.364] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 27.364] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 27.364] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 27.364] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 27.364] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 27.364] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 27.364] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 27.364] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 27.364] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 27.364] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 27.364] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 27.364] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 27.364] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 27.364] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 27.364] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 27.364] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 27.364] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 27.364] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 27.364] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 27.364] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 27.364] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 27.364] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 27.433] (II) intel(0): EDID vendor "SAM", prod id 1428
[ 27.433] (II) intel(0): Using hsync ranges from config file
[ 27.433] (II) intel(0): Using vrefresh ranges from config file
[ 27.433] (II) intel(0): Printing DDC gathered Modelines:
[ 27.433] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 27.434] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 27.434] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 27.434] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 27.434] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 27.434] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 27.434] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 27.434] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 27.434] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 27.434] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 27.434] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 27.434] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 27.434] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 27.434] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 27.434] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 27.434] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 27.434] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 27.434] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 27.434] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 27.434] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 27.434] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 27.434] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 33.144] (EE) intel(0): Detected a hung GPU, disabling acceleration.
[ 33.145] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.146] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.162] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.162] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.166] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.166] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.284] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.287] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.294] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.402] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.402] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.723] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.724] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.725] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.725] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.732] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 34.493] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 34.893] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 35.695] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 36.096] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 36.896] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 37.298] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 38.948] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 38.949] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 39.057] (EE) intel(0): failed to set cursor: Input/output error
[ 39.057] (EE) intel(0): failed to set cursor: Input/output error
[ 39.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 39.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 39.255] (EE) intel(0): failed to set cursor: Input/output error
[ 39.255] (EE) intel(0): failed to set cursor: Input/output error
[ 39.329] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 39.337] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 39.341] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 42.522] (EE) intel(0): failed to set cursor: Input/output error
[ 42.522] (EE) intel(0): failed to set cursor: Input/output error
[ 42.531] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 42.695] (EE) intel(0): failed to set cursor: Input/output error
[ 42.695] (EE) intel(0): failed to set cursor: Input/output error
[ 45.970] (EE) intel(0): failed to set cursor: Input/output error
[ 45.970] (EE) intel(0): failed to set cursor: Input/output error
[ 46.957] (EE) intel(0): failed to set cursor: Input/output error
[ 46.957] (EE) intel(0): failed to set cursor: Input/output error
[ 53.971] (EE) intel(0): failed to set cursor: Input/output error
[ 53.971] (EE) intel(0): failed to set cursor: Input/output error
[ 54.206] (EE) intel(0): failed to set cursor: Input/output error
[ 54.206] (EE) intel(0): failed to set cursor: Input/output error
[ 54.804] (EE) intel(0): failed to set cursor: Input/output error
[ 54.804] (EE) intel(0): failed to set cursor: Input/output error
[ 72.861] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event5)
[ 72.861] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 72.861] (**) USB Optical Mouse: always reports core events
[ 72.861] (**) USB Optical Mouse: Device: "/dev/input/event5"
[ 72.866] (--) USB Optical Mouse: Found 3 mouse buttons
[ 72.866] (--) USB Optical Mouse: Found scroll wheel(s)
[ 72.866] (--) USB Optical Mouse: Found relative axes
[ 72.866] (--) USB Optical Mouse: Found x and y relative axes
[ 72.866] (II) USB Optical Mouse: Configuring as mouse
[ 72.866] (**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 72.866] (**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 72.867] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE)
[ 72.867] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 72.867] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 72.867] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 72.867] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 72.867] (II) USB Optical Mouse: initialized for relative axes.
[ 72.868] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[ 72.868] (II) No input driver/identifier specified (ignoring)
[ 84.484] (EE) intel(0): failed to set cursor: Input/output error
[ 84.484] (EE) intel(0): failed to set cursor: Input/output error
[ 136.555] (EE) intel(0): failed to set cursor: Input/output error
[ 136.555] (EE) intel(0): failed to set cursor: Input/output error
[ 163.561] (EE) intel(0): failed to set cursor: Input/output error
[ 163.561] (EE) intel(0): failed to set cursor: Input/output error
[ 176.751] (EE) intel(0): failed to set cursor: Input/output error
[ 176.752] (EE) intel(0): failed to set cursor: Input/output error
[ 179.565] (EE) intel(0): failed to set cursor: Input/output error
[ 179.565] (EE) intel(0): failed to set cursor: Input/output error
[ 179.613] (EE) intel(0): failed to set cursor: Input/output error
[ 179.613] (EE) intel(0): failed to set cursor: Input/output error
[ 190.939] (EE) intel(0): failed to set cursor: Input/output error
[ 190.939] (EE) intel(0): failed to set cursor: Input/output error
[ 196.719] (EE) intel(0): failed to set cursor: Input/output error
[ 196.719] (EE) intel(0): failed to set cursor: Input/output error
[ 197.007] (EE) intel(0): failed to set cursor: Input/output error
[ 197.007] (EE) intel(0): failed to set cursor: Input/output error
[ 200.991] (EE) intel(0): failed to set cursor: Input/output error
[ 200.991] (EE) intel(0): failed to set cursor: Input/output error
[ 202.499] (EE) intel(0): failed to set cursor: Input/output error
[ 202.499] (EE) intel(0): failed to set cursor: Input/output error
[ 203.164] (EE) intel(0): failed to set cursor: Input/output error
[ 203.164] (EE) intel(0): failed to set cursor: Input/output error
[ 207.322] (EE) intel(0): failed to set cursor: Input/output error
[ 207.323] (EE) intel(0): failed to set cursor: Input/output error
[ 208.093] (EE) intel(0): failed to set cursor: Input/output error
[ 208.094] (EE) intel(0): failed to set cursor: Input/output error
[ 209.080] (EE) intel(0): failed to set cursor: Input/output error
[ 209.081] (EE) intel(0): failed to set cursor: Input/output error
[ 209.641] (EE) intel(0): failed to set cursor: Input/output error
[ 209.642] (EE) intel(0): failed to set cursor: Input/output error
[ 214.392] (EE) intel(0): failed to set cursor: Input/output error
[ 214.392] (EE) intel(0): failed to set cursor: Input/output error
[ 214.885] (EE) intel(0): failed to set cursor: Input/output error
[ 214.885] (EE) intel(0): failed to set cursor: Input/output error
[ 225.899] (EE) intel(0): failed to set cursor: Input/output error
[ 225.899] (EE) intel(0): failed to set cursor: Input/output error
[ 225.912] (EE) intel(0): failed to set cursor: Input/output error
[ 225.913] (EE) intel(0): failed to set cursor: Input/output error
[ 244.351] (EE) intel(0): failed to set cursor: Input/output error
[ 244.351] (EE) intel(0): failed to set cursor: Input/output error
[ 245.332] (EE) intel(0): failed to set cursor: Input/output error
[ 245.332] (EE) intel(0): failed to set cursor: Input/output error
[ 248.711] (EE) intel(0): failed to set cursor: Input/output error
[ 248.712] (EE) intel(0): failed to set cursor: Input/output error
[ 249.347] (EE) intel(0): failed to set cursor: Input/output error
[ 249.348] (EE) intel(0): failed to set cursor: Input/output error
[ 252.594] (EE) intel(0): failed to set cursor: Input/output error
[ 252.594] (EE) intel(0): failed to set cursor: Input/output error
[ 253.062] (EE) intel(0): failed to set cursor: Input/output error
[ 253.062] (EE) intel(0): failed to set cursor: Input/output error
[ 273.635] (EE) intel(0): failed to set cursor: Input/output error
[ 273.635] (EE) intel(0): failed to set cursor: Input/output error
[ 274.148] (EE) intel(0): failed to set cursor: Input/output error
[ 274.148] (EE) intel(0): failed to set cursor: Input/output error
[ 285.208] (EE) intel(0): failed to set cursor: Input/output error
[ 285.208] (EE) intel(0): failed to set cursor: Input/output error
[ 287.473] (EE) intel(0): failed to set cursor: Input/output error
[ 287.473] (EE) intel(0): failed to set cursor: Input/output error
[ 353.216] (EE) intel(0): failed to set cursor: Input/output error
[ 353.216] (EE) intel(0): failed to set cursor: Input/output error
[ 355.928] (EE) intel(0): failed to set cursor: Input/output error
[ 355.928] (EE) intel(0): failed to set cursor: Input/output error
[ 357.845] (EE) intel(0): failed to set cursor: Input/output error
[ 357.845] (EE) intel(0): failed to set cursor: Input/output error
[ 360.465] (EE) intel(0): failed to set cursor: Input/output error
[ 360.465] (EE) intel(0): failed to set cursor: Input/output error
[ 361.916] (EE) intel(0): failed to set cursor: Input/output error
[ 361.917] (EE) intel(0): failed to set cursor: Input/output error
[ 363.505] (EE) intel(0): failed to set cursor: Input/output error
[ 363.505] (EE) intel(0): failed to set cursor: Input/output error
[ 364.433] (EE) intel(0): failed to set cursor: Input/output error
[ 364.433] (EE) intel(0): failed to set cursor: Input/output error
[ 366.375] (EE) intel(0): failed to set cursor: Input/output error
[ 366.375] (EE) intel(0): failed to set cursor: Input/output error
[ 367.953] (EE) intel(0): failed to set cursor: Input/output error
[ 367.954] (EE) intel(0): failed to set cursor: Input/output error
[ 369.092] (EE) intel(0): failed to set cursor: Input/output error
[ 369.092] (EE) intel(0): failed to set cursor: Input/output error
[ 372.906] (EE) intel(0): failed to set cursor: Input/output error
[ 372.906] (EE) intel(0): failed to set cursor: Input/output error
[ 374.450] (EE) intel(0): failed to set cursor: Input/output error
[ 374.451] (EE) intel(0): failed to set cursor: Input/output error
[ 376.802] (EE) intel(0): failed to set cursor: Input/output error
[ 376.803] (EE) intel(0): failed to set cursor: Input/output error
[ 378.140] (EE) intel(0): failed to set cursor: Input/output error
[ 378.140] (EE) intel(0): failed to set cursor: Input/output error
[ 382.347] (EE) intel(0): failed to set cursor: Input/output error
[ 382.347] (EE) intel(0): failed to set cursor: Input/output error
[ 383.812] (EE) intel(0): failed to set cursor: Input/output error
[ 383.812] (EE) intel(0): failed to set cursor: Input/output error
[ 386.612] (EE) intel(0): failed to set cursor: Input/output error
[ 386.612] (EE) intel(0): failed to set cursor: Input/output error
[ 388.092] (EE) intel(0): failed to set cursor: Input/output error
[ 388.092] (EE) intel(0): failed to set cursor: Input/output error
[ 389.436] (EE) intel(0): failed to set cursor: Input/output error
[ 389.436] (EE) intel(0): failed to set cursor: Input/output error
[ 391.131] (EE) intel(0): failed to set cursor: Input/output error
[ 391.131] (EE) intel(0): failed to set cursor: Input/output error
[ 392.372] (EE) intel(0): failed to set cursor: Input/output error
[ 392.373] (EE) intel(0): failed to set cursor: Input/output error
[ 393.630] (EE) intel(0): failed to set cursor: Input/output error
[ 393.631] (EE) intel(0): failed to set cursor: Input/output error
[ 394.932] (EE) intel(0): failed to set cursor: Input/output error
[ 394.933] (EE) intel(0): failed to set cursor: Input/output error
[ 396.629] (EE) intel(0): failed to set cursor: Input/output error
[ 396.629] (EE) intel(0): failed to set cursor: Input/output error
[ 398.349] (EE) intel(0): failed to set cursor: Input/output error
[ 398.349] (EE) intel(0): failed to set cursor: Input/output error
[ 400.264] (EE) intel(0): failed to set cursor: Input/output error
[ 400.264] (EE) intel(0): failed to set cursor: Input/output error
[ 402.517] (EE) intel(0): failed to set cursor: Input/output error
[ 402.518] (EE) intel(0): failed to set cursor: Input/output error
[ 404.749] (EE) intel(0): failed to set cursor: Input/output error
[ 404.749] (EE) intel(0): failed to set cursor: Input/output error
[ 407.798] (EE) intel(0): failed to set cursor: Input/output error
[ 407.798] (EE) intel(0): failed to set cursor: Input/output error
[ 411.170] (EE) intel(0): failed to set cursor: Input/output error
[ 411.170] (EE) intel(0): failed to set cursor: Input/output error
[ 411.910] (EE) intel(0): failed to set cursor: Input/output error
[ 411.912] (EE) intel(0): failed to set cursor: Input/output error
[ 413.276] (EE) intel(0): failed to set cursor: Input/output error
[ 413.276] (EE) intel(0): failed to set cursor: Input/output error
[ 414.775] (EE) intel(0): failed to set cursor: Input/output error
[ 414.775] (EE) intel(0): failed to set cursor: Input/output error
[ 416.762] (EE) intel(0): failed to set cursor: Input/output error
[ 416.763] (EE) intel(0): failed to set cursor: Input/output error
[ 420.439] (EE) intel(0): failed to set cursor: Input/output error
[ 420.440] (EE) intel(0): failed to set cursor: Input/output error
[ 424.614] (EE) intel(0): failed to set cursor: Input/output error
[ 424.614] (EE) intel(0): failed to set cursor: Input/output error
[ 426.920] (EE) intel(0): failed to set cursor: Input/output error
[ 426.920] (EE) intel(0): failed to set cursor: Input/output error
[ 430.033] (EE) intel(0): failed to set cursor: Input/output error
[ 430.033] (EE) intel(0): failed to set cursor: Input/output error
[ 432.265] (EE) intel(0): failed to set cursor: Input/output error
[ 432.265] (EE) intel(0): failed to set cursor: Input/output error
[ 435.339] (EE) intel(0): failed to set cursor: Input/output error
[ 435.339] (EE) intel(0): failed to set cursor: Input/output error
[ 437.705] (EE) intel(0): failed to set cursor: Input/output error
[ 437.706] (EE) intel(0): failed to set cursor: Input/output error
[ 441.112] (EE) intel(0): failed to set cursor: Input/output error
[ 441.112] (EE) intel(0): failed to set cursor: Input/output error
[ 444.922] (EE) intel(0): failed to set cursor: Input/output error
[ 444.922] (EE) intel(0): failed to set cursor: Input/output error
[ 448.296] (EE) intel(0): failed to set cursor: Input/output error
[ 448.296] (EE) intel(0): failed to set cursor: Input/output error
[ 450.299] (EE) intel(0): failed to set cursor: Input/output error
[ 450.299] (EE) intel(0): failed to set cursor: Input/output error
[ 453.190] (EE) intel(0): failed to set cursor: Input/output error
[ 453.191] (EE) intel(0): failed to set cursor: Input/output error
[ 455.467] (EE) intel(0): failed to set cursor: Input/output error
[ 455.468] (EE) intel(0): failed to set cursor: Input/output error
[ 458.751] (EE) intel(0): failed to set cursor: Input/output error
[ 458.751] (EE) intel(0): failed to set cursor: Input/output error
[ 460.132] (EE) intel(0): failed to set cursor: Input/output error
[ 460.132] (EE) intel(0): failed to set cursor: Input/output error
[ 462.768] (EE) intel(0): failed to set cursor: Input/output error
[ 462.770] (EE) intel(0): failed to set cursor: Input/output error
[ 464.061] (EE) intel(0): failed to set cursor: Input/output error
[ 464.061] (EE) intel(0): failed to set cursor: Input/output error
[ 467.064] (EE) intel(0): failed to set cursor: Input/output error
[ 467.064] (EE) intel(0): failed to set cursor: Input/output error
[ 469.637] (EE) intel(0): failed to set cursor: Input/output error
[ 469.637] (EE) intel(0): failed to set cursor: Input/output error
[ 472.446] (EE) intel(0): failed to set cursor: Input/output error
[ 472.447] (EE) intel(0): failed to set cursor: Input/output error
[ 475.654] (EE) intel(0): failed to set cursor: Input/output error
[ 475.654] (EE) intel(0): failed to set cursor: Input/output error
[ 477.849] (EE) intel(0): failed to set cursor: Input/output error
[ 477.852] (EE) intel(0): failed to set cursor: Input/output error
[ 481.102] (EE) intel(0): failed to set cursor: Input/output error
[ 481.102] (EE) intel(0): failed to set cursor: Input/output error
[ 483.658] (EE) intel(0): failed to set cursor: Input/output error
[ 483.658] (EE) intel(0): failed to set cursor: Input/output error
[ 486.239] (EE) intel(0): failed to set cursor: Input/output error
[ 486.239] (EE) intel(0): failed to set cursor: Input/output error
[ 489.082] (EE) intel(0): failed to set cursor: Input/output error
[ 489.083] (EE) intel(0): failed to set cursor: Input/output error
[ 491.279] (EE) intel(0): failed to set cursor: Input/output error
[ 491.280] (EE) intel(0): failed to set cursor: Input/output error
[ 494.315] (EE) intel(0): failed to set cursor: Input/output error
[ 494.315] (EE) intel(0): failed to set cursor: Input/output error
[ 495.905] (EE) intel(0): failed to set cursor: Input/output error
[ 495.905] (EE) intel(0): failed to set cursor: Input/output error
[ 498.171] (EE) intel(0): failed to set cursor: Input/output error
[ 498.172] (EE) intel(0): failed to set cursor: Input/output error
[ 499.312] (EE) intel(0): failed to set cursor: Input/output error
[ 499.313] (EE) intel(0): failed to set cursor: Input/output error
[ 501.813] (EE) intel(0): failed to set cursor: Input/output error
[ 501.813] (EE) intel(0): failed to set cursor: Input/output error
[ 502.817] (EE) intel(0): failed to set cursor: Input/output error
[ 502.817] (EE) intel(0): failed to set cursor: Input/output error
[ 507.125] (EE) intel(0): failed to set cursor: Input/output error
[ 507.125] (EE) intel(0): failed to set cursor: Input/output error
[ 508.209] (EE) intel(0): failed to set cursor: Input/output error
[ 508.210] (EE) intel(0): failed to set cursor: Input/output error
[ 540.521] (EE) intel(0): failed to set cursor: Input/output error
[ 540.526] (EE) intel(0): failed to set cursor: Input/output error
[ 541.621] (EE) intel(0): failed to set cursor: Input/output error
[ 541.621] (EE) intel(0): failed to set cursor: Input/output error
[ 552.597] (EE) intel(0): failed to set cursor: Input/output error
[ 552.597] (EE) intel(0): failed to set cursor: Input/output error
[ 553.470] (EE) intel(0): failed to set cursor: Input/output error
[ 553.471] (EE) intel(0): failed to set cursor: Input/output error
[ 554.186] (EE) intel(0): failed to set cursor: Input/output error
[ 554.186] (EE) intel(0): failed to set cursor: Input/output error
[ 555.103] (EE) intel(0): failed to set cursor: Input/output error
[ 555.103] (EE) intel(0): failed to set cursor: Input/output error
[ 690.143] (EE) intel(0): failed to set cursor: Input/output error
[ 690.143] (EE) intel(0): failed to set cursor: Input/output error
[ 690.263] (EE) intel(0): failed to set cursor: Input/output error
[ 690.263] (EE) intel(0): failed to set cursor: Input/output error
[ 690.333] (EE) intel(0): failed to set cursor: Input/output error
[ 690.333] (EE) intel(0): failed to set cursor: Input/output error
[ 690.557] (EE) intel(0): failed to set cursor: Input/output error
[ 690.557] (EE) intel(0): failed to set cursor: Input/output error
[ 690.591] (EE) intel(0): failed to set cursor: Input/output error
[ 690.591] (EE) intel(0): failed to set cursor: Input/output error
[ 690.606] (EE) intel(0): failed to set cursor: Input/output error
[ 690.607] (EE) intel(0): failed to set cursor: Input/output error
[ 691.055] (EE) intel(0): failed to set cursor: Input/output error
[ 691.055] (EE) intel(0): failed to set cursor: Input/output error
[ 691.070] (EE) intel(0): failed to set cursor: Input/output error
[ 691.071] (EE) intel(0): failed to set cursor: Input/output error
[ 755.300] (EE) intel(0): failed to set cursor: Input/output error
[ 755.300] (EE) intel(0): failed to set cursor: Input/output error
[ 755.444] (EE) intel(0): failed to set cursor: Input/output error
[ 755.444] (EE) intel(0): failed to set cursor: Input/output error
[ 765.910] (EE) intel(0): failed to set cursor: Input/output error
[ 765.911] (EE) intel(0): failed to set cursor: Input/output error
[ 769.826] (EE) intel(0): failed to set cursor: Input/output error
[ 769.827] (EE) intel(0): failed to set cursor: Input/output error
[ 771.279] (EE) intel(0): failed to set cursor: Input/output error
[ 771.279] (EE) intel(0): failed to set cursor: Input/output error
[ 776.475] (EE) intel(0): failed to set cursor: Input/output error
[ 776.475] (EE) intel(0): failed to set cursor: Input/output error
[ 777.584] (EE) intel(0): failed to set cursor: Input/output error
[ 777.584] (EE) intel(0): failed to set cursor: Input/output error
[ 782.163] (EE) intel(0): failed to set cursor: Input/output error
[ 782.163] (EE) intel(0): failed to set cursor: Input/output error
[ 784.345] (EE) intel(0): failed to set cursor: Input/output error
[ 784.345] (EE) intel(0): failed to set cursor: Input/output error
[ 789.813] (EE) intel(0): failed to set cursor: Input/output error
[ 789.814] (EE) intel(0): failed to set cursor: Input/output error
[ 793.986] (EE) intel(0): failed to set cursor: Input/output error
[ 793.986] (EE) intel(0): failed to set cursor: Input/output error
[ 796.717] (EE) intel(0): failed to set cursor: Input/output error
[ 796.717] (EE) intel(0): failed to set cursor: Input/output error
[ 802.971] (EE) intel(0): failed to set cursor: Input/output error
[ 802.971] (EE) intel(0): failed to set cursor: Input/output error
[ 805.567] (EE) intel(0): failed to set cursor: Input/output error
[ 805.568] (EE) intel(0): failed to set cursor: Input/output error
[ 807.811] (EE) intel(0): failed to set cursor: Input/output error
[ 807.811] (EE) intel(0): failed to set cursor: Input/output error
[ 814.410] (EE) intel(0): failed to set cursor: Input/output error
[ 814.410] (EE) intel(0): failed to set cursor: Input/output error
[ 815.460] (EE) intel(0): failed to set cursor: Input/output error
[ 815.460] (EE) intel(0): failed to set cursor: Input/output error
[ 818.800] (EE) intel(0): failed to set cursor: Input/output error
[ 818.800] (EE) intel(0): failed to set cursor: Input/output error
[ 821.589] (EE) intel(0): failed to set cursor: Input/output error
[ 821.589] (EE) intel(0): failed to set cursor: Input/output error
[ 825.657] (EE) intel(0): failed to set cursor: Input/output error
[ 825.657] (EE) intel(0): failed to set cursor: Input/output error
[ 828.078] (EE) intel(0): failed to set cursor: Input/output error
[ 828.078] (EE) intel(0): failed to set cursor: Input/output error
[ 831.833] (EE) intel(0): failed to set cursor: Input/output error
[ 831.834] (EE) intel(0): failed to set cursor: Input/output error
[ 833.806] (EE) intel(0): failed to set cursor: Input/output error
[ 833.807] (EE) intel(0): failed to set cursor: Input/output error
[ 835.978] (EE) intel(0): failed to set cursor: Input/output error
[ 835.978] (EE) intel(0): failed to set cursor: Input/output error
[ 840.143] (EE) intel(0): failed to set cursor: Input/output error
[ 840.143] (EE) intel(0): failed to set cursor: Input/output error
[ 854.335] (EE) intel(0): failed to set cursor: Input/output error
[ 854.335] (EE) intel(0): failed to set cursor: Input/output error
[ 855.471] (EE) intel(0): failed to set cursor: Input/output error
[ 855.471] (EE) intel(0): failed to set cursor: Input/output error
[ 867.428] (EE) intel(0): failed to set cursor: Input/output error
[ 867.429] (EE) intel(0): failed to set cursor: Input/output error
[ 870.354] (EE) intel(0): failed to set cursor: Input/output error
[ 870.355] (EE) intel(0): failed to set cursor: Input/output error
[ 873.062] (EE) intel(0): failed to set cursor: Input/output error
[ 873.062] (EE) intel(0): failed to set cursor: Input/output error
[ 873.955] (EE) intel(0): failed to set cursor: Input/output error
[ 873.955] (EE) intel(0): failed to set cursor: Input/output error
[ 877.131] (EE) intel(0): failed to set cursor: Input/output error
[ 877.132] (EE) intel(0): failed to set cursor: Input/output error
[ 878.020] (EE) intel(0): failed to set cursor: Input/output error
[ 878.021] (EE) intel(0): failed to set cursor: Input/output error
[ 880.499] (EE) intel(0): failed to set cursor: Input/output error
[ 880.499] (EE) intel(0): failed to set cursor: Input/output error
[ 881.708] (EE) intel(0): failed to set cursor: Input/output error
[ 881.708] (EE) intel(0): failed to set cursor: Input/output error
[ 884.711] (EE) intel(0): failed to set cursor: Input/output error
[ 884.711] (EE) intel(0): failed to set cursor: Input/output error
[ 893.533] (EE) intel(0): failed to set cursor: Input/output error
[ 893.533] (EE) intel(0): failed to set cursor: Input/output error
[ 896.537] (EE) intel(0): failed to set cursor: Input/output error
[ 896.537] (EE) intel(0): failed to set cursor: Input/output error
[ 898.029] (EE) intel(0): failed to set cursor: Input/output error
[ 898.030] (EE) intel(0): failed to set cursor: Input/output error
[ 901.447] (EE) intel(0): failed to set cursor: Input/output error
[ 901.447] (EE) intel(0): failed to set cursor: Input/output error
[ 902.670] (EE) intel(0): failed to set cursor: Input/output error
[ 902.670] (EE) intel(0): failed to set cursor: Input/output error
[ 907.266] (EE) intel(0): failed to set cursor: Input/output error
[ 907.267] (EE) intel(0): failed to set cursor: Input/output error
[ 908.415] (EE) intel(0): failed to set cursor: Input/output error
[ 908.415] (EE) intel(0): failed to set cursor: Input/output error
[ 911.083] (EE) intel(0): failed to set cursor: Input/output error
[ 911.083] (EE) intel(0): failed to set cursor: Input/output error
[ 912.335] (EE) intel(0): failed to set cursor: Input/output error
[ 912.335] (EE) intel(0): failed to set cursor: Input/output error
[ 914.699] (EE) intel(0): failed to set cursor: Input/output error
[ 914.699] (EE) intel(0): failed to set cursor: Input/output error
[ 915.519] (EE) intel(0): failed to set cursor: Input/output error
[ 915.520] (EE) intel(0): failed to set cursor: Input/output error
[ 921.179] (EE) intel(0): failed to set cursor: Input/output error
[ 921.180] (EE) intel(0): failed to set cursor: Input/output error
[ 923.296] (EE) intel(0): failed to set cursor: Input/output error
[ 923.297] (EE) intel(0): failed to set cursor: Input/output error
[ 926.020] (EE) intel(0): failed to set cursor: Input/output error
[ 926.021] (EE) intel(0): failed to set cursor: Input/output error
[ 926.881] (EE) intel(0): failed to set cursor: Input/output error
[ 926.881] (EE) intel(0): failed to set cursor: Input/output error
[ 930.252] (EE) intel(0): failed to set cursor: Input/output error
[ 930.252] (EE) intel(0): failed to set cursor: Input/output error
[ 931.105] (EE) intel(0): failed to set cursor: Input/output error
[ 931.105] (EE) intel(0): failed to set cursor: Input/output error
[ 938.375] (EE) intel(0): failed to set cursor: Input/output error
[ 938.376] (EE) intel(0): failed to set cursor: Input/output error
[ 951.395] (EE) intel(0): failed to set cursor: Input/output error
[ 951.396] (EE) intel(0): failed to set cursor: Input/output error
[ 997.695] (EE) intel(0): failed to set cursor: Input/output error
[ 997.695] (EE) intel(0): failed to set cursor: Input/output error
[ 1034.261] (EE) intel(0): failed to set cursor: Input/output error
[ 1034.261] (EE) intel(0): failed to set cursor: Input/output error
[ 1042.673] (EE) intel(0): failed to set cursor: Input/output error
[ 1042.674] (EE) intel(0): failed to set cursor: Input/output error
[ 1058.408] (EE) intel(0): failed to set cursor: Input/output error
[ 1058.408] (EE) intel(0): failed to set cursor: Input/output error
[ 1061.964] (EE) intel(0): failed to set cursor: Input/output error
[ 1061.964] (EE) intel(0): failed to set cursor: Input/outpuI have installed the xf86-video-intel-newest from AUR, but with modified version - 2.13.0. Now mouse pointer works.
Maybe you are looking for
-
I got iphone 4s secondhand and i made restore then its asking me for apple Id which i don't have it even the first owner i ask him about it but he don't have? please i need your HELP
-
I have lost the sound on my PC. How do I get it back
I have lost all the sound on my PC., I can'tget it back. What do I do?
-
Hi There I am posting this here as my fiancé is pulling her hair out over Verizon's customer service (or lack of it). I'm from the UK, my fiancé came to visit me from Florida. Originally for 3 weeks then decided to stay for 6 months. I advised her to
-
Windows 8.1 MDM not responding to first SyncML from MDM server per session
Here is the behaviour which I face after enrolling Windows 8.1 1) Device is enrolled 2) Client initiates the connection with the MDM server defined in provisioning XML during enrollment. 3) MDM Server sends some commands as a SyncML response. 4) Cli
-
Is JSF 1.0 redistributable for commercial apps
We need to write a JSF app and plan to use JSF 1.0 but it says they are sun licensed binaries. So do we need some licensing or can we just use them and redistribute them? Please suggest. Thanks